Pls help in webform.cfg file..sorry for many postings since i am struggling

Hi all,
HMMM.. i fixed the problem.. but still need some help
in my url i specified local host instead of servername and i am able to run the form on the web.
http:localhost:8888/forms90/f90servlet?form=....etc(working fine)
instead of
http:itxkjdkk:8888/forms90/f90servlet?form=
This is throwing error FRM92050
but the problem is when ever i run the fmb from form builder in the IE browser
it is taking the http://itxkjdkk:8888/forms90/f90servlet..so throwing error so i have to manually replace the url in browser to localhost:8888
How can i set this through in formsweb.cfg..i did try to
http:localhost:8888/forms90/f90servlet?form=....in server_url parameter of the
formsweb.cfg but still it is taking http://itxkjdkk:8888/forms90/f90servlet when i run the form on web..
pls help
asp

Hi,
In Builder Preferences dialog, under the runtime tab,
change the Application Server URL to the desired URL
and run the form.
HTH.
Regards,
ArunHi Arun,
Thanks for help..
As you suggested i have to manually set the application server url each time when i invoke the form builder..
I really dont understand why forms behaving like this. when i pass the servername it is throwing error and if i pass localhost instead of server name it is working fine.
It is taking the default application url value : http://servername:8888//forms90//...
but it is throwing error FRM 92050
if i pass http://localhost:8888/forms90... good everything is fine.. now
now i want to change default application url..i tried it in formsweb.cfg
server_url=http://localhost:8888/forms90/f90servelet..
if i run the form with above parameter...at least IE is not invoked..
if that parameter value is /forms90/f90servelet then atleast it will invoke IE and throwing error 92050
Pls help
asp

Similar Messages

  • Pls help me in sending sequential responses for the different commands.

    Hi all
    pls help me in  sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2  after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
    regards,
    nitin

    Hi,
    you need to be more specific. What is your setup?
    Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.
    Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572
    Dai
    Dai
    LV 7.1 - WIN XP - RT - FP

  • What is best for me. I have been using Elements for many years (since Elements 2) and now want to but either 13 or Lightroom. Can anyone help me decide

    I have been using Elements for many years (since elements 2) and now want to upgrade. I am reasonably old and at this stage do not understand Creative Cloud. Am I best to upgrade to Elements 13 or try Light room 5?

    Do you want to make a one time purchase (Photoshop Elements) or pay monthly rent ($9.99 per month for Photoshop and Lightroom)
    Do be aware that the subscription model is just like rent... stop paying and the programs stop working... but you get the full Photoshop

  • Hs_err_pid3108 error pls help me its really been there for a year now =(

    Here is the complete error file:
    # An unexpected error has been detected by Java Runtime Environment:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2309cfa0, pid=3108, tid=2896
    # Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
    # Problematic frame:
    # C 0x2309cfa0
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x07c48000): JavaThread "Thread-10" daemon [_thread_in_Java, id=2896]
    siginfo: ExceptionCode=0xc0000005, writing address 0x385d0800
    Registers:
    EAX=0x001f0900, EBX=0x00000109, ECX=0x2309cf98, EDX=0x0000dc00
    ESP=0x0a33ebb0, EBP=0x0a33f008, ESI=0x0000dc00, EDI=0x00000135
    EIP=0x2309cfa0, EFLAGS=0x00210246
    Top of Stack: (sp=0x0a33ebb0)
    0x0a33ebb0: 00000000 00000000 00000135 00000135
    0x0a33ebc0: 001f0900 001f0900 0000013d 10c50000
    0x0a33ebd0: 01590005 00730000 0000006e ffff6187
    0x0a33ebe0: 000030c3 ffff6187 00000083 ffff5e51
    0x0a33ebf0: 000006bc ffff5e51 ffff8000 0001c000
    0x0a33ec00: ffff8000 00000073 00000071 0f460000
    0x0a33ec10: 017c3332 01480000 01480000 0b0f8000
    0x0a33ec20: 0b0f8000 00000000 0b0f8000 00000002
    Instructions: (pc=0x2309cfa0)
    0x2309cf90: 01 00 00 00 ac 0a 00 00 01 00 00 00 88 e3 72 2b
    0x2309cfa0: 01 9c 02 00 23 3d 38 00 23 3d 38 00 23 3d 38 00
    Stack: [0x0a240000,0x0a340000), sp=0x0a33ebb0, free space=1018k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C 0x2309cfa0
    J ea.k(I)V
    J ea.a(ZZI)V
    J ea.a(IIIIIIIII)V
    J qb.a(Lse;Z)V
    J qb.a(IIIIII)V
    J pf.a(I)V
    J lb.b(B)V
    J client.a(I)V
    J v.g(I)V
    J v.run()V
    j java.lang.Thread.run()V+11
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x0aad9400 JavaThread "Thread-16" daemon [_thread_blocked, id=2004]
    0x08994800 JavaThread "Thread-15" daemon [_thread_blocked, id=3856]
    0x089ae400 JavaThread "Thread-14" daemon [_thread_blocked, id=3464]
    0x08964000 JavaThread "Java Sound Event Dispatcher" daemon [_thread_blocked, id=3760]
    0x0899e000 JavaThread "Thread-11" daemon [_thread_blocked, id=404]
    =>0x07c48000 JavaThread "Thread-10" daemon [_thread_in_Java, id=2896]
    0x08adbc00 JavaThread "Thread-9" daemon [_thread_blocked, id=1592]
    0x0894bc00 JavaThread "AWT-EventQueue-2" [_thread_in_native, id=3192]
    0x08ae5c00 JavaThread "thread applet-loader.class" [_thread_blocked, id=3276]
    0x0894ac00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=3256]
    0x08946400 JavaThread "AWT-Shutdown" [_thread_blocked, id=2888]
    0x08940400 JavaThread "CacheCleanUpThread" daemon [_thread_blocked, id=3004]
    0x07d32c00 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=3712]
    0x07d26400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3568]
    0x07d24400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3092]
    0x07c70400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3348]
    0x07c6b800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3596]
    0x07c6a400 JavaThread "Attach Listener" daemon [_thread_blocked, id=2756]
    0x07c69400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2764]
    0x07c65000 JavaThread "Finalizer" daemon [_thread_blocked, id=2460]
    0x07c60800 JavaThread "Reference Handler" daemon [_thread_blocked, id=3616]
    0x02949c00 JavaThread "main" [_thread_in_native, id=2308]
    Other Threads:
    0x07c57400 VMThread [id=3600]
    0x07c8ac00 WatcherThread [id=1144]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 6080K, used 4552K [0x20960000, 0x20ff0000, 0x210c0000)
    eden space 5440K, 73% used [0x20960000, 0x20d442e8, 0x20eb0000)
    from space 640K, 88% used [0x20f50000, 0x20fde068, 0x20ff0000)
    to space 640K, 0% used [0x20eb0000, 0x20eb0000, 0x20f50000)
    tenured generation total 80140K, used 69910K [0x210c0000, 0x25f03000, 0x26960000)
    the space 80140K, 87% used [0x210c0000, 0x25505930, 0x25505a00, 0x25f03000)
    compacting perm gen total 12288K, used 4386K [0x26960000, 0x27560000, 0x2a960000)
    the space 12288K, 35% used [0x26960000, 0x26da8998, 0x26da8a00, 0x27560000)
    ro space 8192K, 62% used [0x2a960000, 0x2ae5e4e8, 0x2ae5e600, 0x2b160000)
    rw space 12288K, 52% used [0x2b160000, 0x2b7a0e78, 0x2b7a1000, 0x2bd60000)
    Dynamic libraries:
    0x00400000 - 0x0049a000      C:\Program Files\Internet Explorer\iexplore.exe
    0x7c900000 - 0x7c9b6000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8fe000      C:\WINDOWS\system32\kernel32.dll
    0x77f40000 - 0x77feb000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77da0000 - 0x77e31000      C:\WINDOWS\system32\RPCRT4.dll
    0x77e40000 - 0x77e87000      C:\WINDOWS\system32\GDI32.dll
    0x7e390000 - 0x7e420000      C:\WINDOWS\system32\USER32.dll
    0x77be0000 - 0x77c38000      C:\WINDOWS\system32\msvcrt.dll
    0x00330000 - 0x003a6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x7c9c0000 - 0x7d1e0000      C:\WINDOWS\system32\SHELL32.dll
    0x774a0000 - 0x775dd000      C:\WINDOWS\system32\ole32.dll
    0x61410000 - 0x61531000      C:\WINDOWS\system32\urlmon.dll
    0x770e0000 - 0x7716c000      C:\WINDOWS\system32\OLEAUT32.dll
    0x5dca0000 - 0x5dce4000      C:\WINDOWS\system32\iertutil.dll
    0x77bd0000 - 0x77bd8000      C:\WINDOWS\system32\VERSION.dll
    0x76330000 - 0x7634d000      C:\WINDOWS\system32\IMM32.DLL
    0x77390000 - 0x77493000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
    0x5d4e0000 - 0x5d57a000      C:\WINDOWS\system32\comctl32.dll
    0x00a40000 - 0x00fe6000      C:\WINDOWS\system32\IEFRAME.dll
    0x76bb0000 - 0x76bbb000      C:\WINDOWS\system32\PSAPI.DLL
    0x771b0000 - 0x7727c000      C:\WINDOWS\system32\WININET.dll
    0x009a0000 - 0x009a9000      C:\WINDOWS\system32\Normaliz.dll
    0x5b190000 - 0x5b1c8000      C:\WINDOWS\system32\UxTheme.dll
    0x754d0000 - 0x75578000      C:\WINDOWS\system32\RASDLG.dll
    0x76d00000 - 0x76d18000      C:\WINDOWS\system32\MPRAPI.dll
    0x77c90000 - 0x77cc2000      C:\WINDOWS\system32\ACTIVEDS.dll
    0x76dd0000 - 0x76df5000      C:\WINDOWS\system32\adsldpc.dll
    0x6ff20000 - 0x6ff74000      C:\WINDOWS\system32\NETAPI32.dll
    0x76f20000 - 0x76f4d000      C:\WINDOWS\system32\WLDAP32.dll
    0x76ad0000 - 0x76ae1000      C:\WINDOWS\system32\ATL.DLL
    0x76e40000 - 0x76e4e000      C:\WINDOWS\system32\rtutils.dll
    0x71b80000 - 0x71b93000      C:\WINDOWS\system32\SAMLIB.dll
    0x778e0000 - 0x779d7000      C:\WINDOWS\system32\SETUPAPI.dll
    0x76ea0000 - 0x76edc000      C:\WINDOWS\system32\RASAPI32.dll
    0x76e50000 - 0x76e62000      C:\WINDOWS\system32\rasman.dll
    0x71a30000 - 0x71a47000      C:\WINDOWS\system32\WS2_32.dll
    0x71a20000 - 0x71a28000      C:\WINDOWS\system32\WS2HELP.dll
    0x76e70000 - 0x76e9f000      C:\WINDOWS\system32\TAPI32.dll
    0x76af0000 - 0x76b1e000      C:\WINDOWS\system32\WINMM.dll
    0x746a0000 - 0x746eb000      C:\WINDOWS\system32\MSCTF.dll
    0x20000000 - 0x202d5000      C:\WINDOWS\system32\xpsp2res.dll
    0x77b00000 - 0x77b22000      C:\WINDOWS\system32\apphelp.dll
    0x75250000 - 0x7527e000      C:\WINDOWS\system32\msctfime.ime
    0x5dff0000 - 0x5e01e000      C:\WINDOWS\system32\IEUI.dll
    0x76320000 - 0x76325000      C:\WINDOWS\system32\MSIMG32.dll
    0x4eb80000 - 0x4ed23000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.2600.2180_x-ww_522f9f82\gdiplus.dll
    0x47060000 - 0x47081000      C:\WINDOWS\system32\xmllite.dll
    0x76f90000 - 0x7700f000      C:\WINDOWS\system32\CLBCATQ.DLL
    0x77010000 - 0x770dd000      C:\WINDOWS\system32\COMRes.dll
    0x74670000 - 0x7469a000      C:\WINDOWS\System32\msimtf.dll
    0x77f10000 - 0x77f21000      C:\WINDOWS\system32\Secur32.dll
    0x60a30000 - 0x60a39000      C:\WINDOWS\system32\mslbui.dll
    0x779e0000 - 0x77a36000      C:\WINDOWS\System32\cscui.dll
    0x765a0000 - 0x765bd000      C:\WINDOWS\System32\CSCDLL.dll
    0x325c0000 - 0x325d2000      C:\Program Files\Microsoft Office\OFFICE11\msohev.dll
    0x61930000 - 0x61979000      C:\Program Files\Internet Explorer\ieproxy.dll
    0x7d1f0000 - 0x7d4ae000      C:\WINDOWS\system32\msi.dll
    0x75e30000 - 0x75ee0000      C:\WINDOWS\system32\SXS.DLL
    0x75d40000 - 0x75dd1000      C:\WINDOWS\system32\MLANG.dll
    0x10000000 - 0x1000e000      C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
    0x7c340000 - 0x7c396000      C:\WINDOWS\system32\MSVCR71.dll
    0x02950000 - 0x0296b000      C:\WINDOWS\system32\dla\tfswshx.dll
    0x02970000 - 0x0297f000      C:\WINDOWS\system32\tfswapi.dll
    0x029e0000 - 0x02a7b000      C:\WINDOWS\system32\dla\tfswcres.dll
    0x6d7c0000 - 0x6d839000      C:\Program Files\Java\jre1.6.0_01\bin\ssv.dll
    0x719d0000 - 0x71a10000      C:\WINDOWS\system32\mswsock.dll
    0x61200000 - 0x61259000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a10000 - 0x71a18000      C:\WINDOWS\System32\wshtcpip.dll
    0x76970000 - 0x76a24000      C:\WINDOWS\system32\USERENV.dll
    0x77c40000 - 0x77c63000      C:\WINDOWS\system32\msv1_0.dll
    0x76d20000 - 0x76d39000      C:\WINDOWS\system32\iphlpapi.dll
    0x71cd0000 - 0x71cec000      C:\WINDOWS\system32\actxprxy.dll
    0x72240000 - 0x72245000      C:\WINDOWS\system32\sensapi.dll
    0x76f80000 - 0x76f86000      C:\WINDOWS\system32\rasadhlp.dll
    0x76ee0000 - 0x76f07000      C:\WINDOWS\system32\DNSAPI.dll
    0x7e830000 - 0x7eb8c000      C:\WINDOWS\system32\mshtml.dll
    0x03000000 - 0x03029000      C:\WINDOWS\system32\msls31.dll
    0x72ea0000 - 0x72f00000      C:\WINDOWS\system32\ieapfltr.dll
    0x76bf0000 - 0x76c1e000      C:\WINDOWS\system32\WINTRUST.dll
    0x77a40000 - 0x77ad5000      C:\WINDOWS\system32\CRYPT32.dll
    0x77ae0000 - 0x77af2000      C:\WINDOWS\system32\MSASN1.dll
    0x76c50000 - 0x76c78000      C:\WINDOWS\system32\IMAGEHLP.dll
    0x77650000 - 0x77671000      C:\WINDOWS\system32\NTMARTA.DLL
    0x63380000 - 0x633f7000      C:\WINDOWS\System32\jscript.dll
    0x58760000 - 0x58792000      C:\WINDOWS\system32\iepeers.dll
    0x72f70000 - 0x72f96000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76200000 - 0x76276000      C:\WINDOWS\system32\mshtmled.dll
    0x1b000000 - 0x1b00c000      C:\WINDOWS\system32\ImgUtil.dll
    0x1b060000 - 0x1b06e000      C:\WINDOWS\system32\pngfilt.dll
    0x72c90000 - 0x72c99000      C:\WINDOWS\system32\wdmaud.drv
    0x72c80000 - 0x72c88000      C:\WINDOWS\system32\msacm32.drv
    0x77bb0000 - 0x77bc5000      C:\WINDOWS\system32\MSACM32.dll
    0x77ba0000 - 0x77ba7000      C:\WINDOWS\system32\midimap.dll
    0x74900000 - 0x74a0e000      C:\WINDOWS\System32\msxml3.dll
    0x767a0000 - 0x767c7000      C:\WINDOWS\system32\schannel.dll
    0x0ffd0000 - 0x0fff8000      C:\WINDOWS\system32\rsaenh.dll
    0x68100000 - 0x68124000      C:\WINDOWS\system32\dssenh.dll
    0x74d10000 - 0x74d7b000      C:\WINDOWS\system32\USP10.dll
    0x6d6b0000 - 0x6d6d1000      C:\Program Files\Java\jre1.6.0_01\bin\npjpi160_01.dll
    0x6d4a0000 - 0x6d4bb000      C:\Program Files\Java\jre1.6.0_01\bin\jpiexp.dll
    0x6d250000 - 0x6d261000      C:\Program Files\Java\jre1.6.0_01\bin\deploy.dll
    0x71a50000 - 0x71a5a000      C:\WINDOWS\system32\wsock32.dll
    0x76f70000 - 0x76f78000      C:\WINDOWS\System32\winrnr.dll
    0x6d4f0000 - 0x6d514000      C:\Program Files\Java\jre1.6.0_01\bin\jpishare.dll
    0x05960000 - 0x05ba7000      C:\PROGRA~1\Java\JRE16~1.0_0\bin\client\jvm.dll
    0x6d310000 - 0x6d318000      C:\PROGRA~1\Java\JRE16~1.0_0\bin\hpi.dll
    0x6d770000 - 0x6d77c000      C:\PROGRA~1\Java\JRE16~1.0_0\bin\verify.dll
    0x6d3b0000 - 0x6d3cf000      C:\PROGRA~1\Java\JRE16~1.0_0\bin\java.dll
    0x6d7b0000 - 0x6d7bf000      C:\PROGRA~1\Java\JRE16~1.0_0\bin\zip.dll
    0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_01\bin\awt.dll
    0x736d0000 - 0x73719000      C:\WINDOWS\system32\ddraw.dll
    0x73b30000 - 0x73b36000      C:\WINDOWS\system32\DCIMAN32.dll
    0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_01\bin\fontmanager.dll
    0x6d480000 - 0x6d498000      C:\Program Files\Java\jre1.6.0_01\bin\jpicom.dll
    0x08c40000 - 0x08c7b000      C:\Program Files\Java\jre1.6.0_01\bin\regutils.dll
    0x30000000 - 0x302ee000      C:\WINDOWS\system32\Macromed\Flash\Flash9b.ocx
    0x76350000 - 0x7639a000      C:\WINDOWS\system32\comdlg32.dll
    0x69000000 - 0x6900e000      C:\WINDOWS\system32\Macromed\Common\SwSupport.dll
    0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_01\bin\net.dll
    0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_01\bin\dcpr.dll
    0x6d940000 - 0x6d94a000      C:\WINDOWS\System32\ddrawex.dll
    0x6d760000 - 0x6d76f000      C:\Program Files\Java\jre1.6.0_01\bin\unpack.dll
    0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_01\bin\nio.dll
    0x6d520000 - 0x6d544000      C:\Program Files\Java\jre1.6.0_01\bin\jsound.dll
    0x6d550000 - 0x6d558000      C:\Program Files\Java\jre1.6.0_01\bin\jsoundds.dll
    0x73e80000 - 0x73edc000      C:\WINDOWS\system32\DSOUND.dll
    0x73e50000 - 0x73e54000      C:\WINDOWS\system32\KsUser.dll
    0x6d450000 - 0x6d474000      C:\Program Files\Java\jre1.6.0_01\bin\jpeg.dll
    VM Arguments:
    jvm_args: -Xbootclasspath/a:C:\PROGRA~1\Java\JRE16~1.0_0\lib\deploy.jar;C:\PROGRA~1\Java\JRE16~1.0_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.6.0_01 -Djavaplugin.nodotversion=160_01 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\Java\JRE16~1.0_0 -Djavaplugin.vm.options=-Djava.class.path=C:\PROGRA~1\Java\JRE16~1.0_0\classes -Xbootclasspath/a:C:\PROGRA~1\Java\JRE16~1.0_0\lib\deploy.jar;C:\PROGRA~1\Java\JRE16~1.0_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.6.0_01 -Djavaplugin.nodotversion=160_01 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\Java\JRE16~1.0_0
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    CLASSPATH=.;
    PATH=C:\PROGRA~1\Java\JRE16~1.0_0\bin;C:\Program Files\Internet Explorer;;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Sonic\MyDVD;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\Sonic\MyDVD;;C:\DESKJET;.
    USERNAME=Giel
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 1 family 15, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 523808k(60484k free), swap 1228812k(801124k free)
    vm_info: Java HotSpot(TM) Client VM (1.6.0_01-b06) for windows-x86, built on Mar 14 2007 00:24:02 by "java_re" with unknown MS VC++:1310
    Thanks for your help, it would be really nice if annyone could help me out here. I am encountering this problem for more then a year now, and nothing has been able to fix it. pls help me

    The stack trace from the hs_err log doesn't provide a ton of info on this. I would try running with the server compiler (add the option '-server' to your command line) to see if this is due to something in the client compiler. Aside from that, look at the Java SE 6 troubleshooting guide, it has a number of tips for getting more information:
    http://java.sun.com/javase/6/webnotes/trouble/index.html
    Best of all, if you have a (hopefully small) reproducible test case that you can provide to us (Sun), then please file a bug.

  • Sorry for multiple postings (9iAS Rel.2 on Mandrake 8.1)

    Hi All,
    I am sorry for multiple appearances of
    my previous posting due to forum server
    error. I received a message saying that
    server was down. I kept trying to send
    my posting. This is why multiple postings
    show up here.
    Leon,

    Note that if you don't have /bin/ksh, the Oracle Internet Directory configuration will fail.
    You can either ln -s /bin/bash /bin/ksh (from root) or edit the configuration script itself to change the #!/bin/ksh to #!/bin/bash. The configuration script is in $ORACLE_HOME/ldap/postcfg.
    Jeff

  • Pls help decompress jsonl4 bookmark file

    After one of latest Firefox update (think it was around version 32) the bookmark file was compressed as "bookmarks_<date>....==.jsonlz4 file. After an update the new Firefox was not able to retrieve the compressed bookmark. I hope that here is a way to decompress this file outside the Firefox and retrieve it either as json or html file or a file that is retrievable by latest Firefox (34).
    The file is found in the following location:
    C:\<user name>\AppData\Roaming\Mozilla\Firefox\Profiles\mvf52dyv.default
    bookmark\bookmarks-2014-11-01-15....==.lzh
    bookmarkbackups\bookmarks-2014-11-01_15_....==.jsonlz4
    The “mvf52dyv” is the from the old installation. The new one is tw145s6s.default
    To save it I renamed the “old” Mozilla directory to Mozilla_ before uninstalling and reinstalling a clean new version. Copied back the "old" jsonlz4 and "places.sqlite" to new "bookmarkbackups" directory but still no luck.
    One observation is that the new firefox (34 – just updated)) had jsonlz4 file and places.sqlite in a bookmarkbackups directory, while older versions has it at “<...>.default” directory level. Also, the new Firefox does not have bookmark directory, where the old one has in it bookmarks-<date>==.lzh file.
    I did try suggestion from the Firefox help pages to copy the old bookmarkbackups (with places.sqlite) into place of the new one, but that did not help. Even tried to copy the whole old mvf52dyv.default under new Mozilla directory, but this also did not work.
    Is this old bookmark lost for good or there is a hope to restore it? I will appreciate any help in restoring the content of the old bookmark.
    Regards
    Darko

    Thank you for the replay. With few attempts I was able to restore the “old” bookmark. Unfortunately, what I thought to be the old one has already been overwritten by an empty bookmark either during an update or one crash that happen around that time.
    The interesting thing is that this “old” jsonlz4 file has date in name bookmarkbackups-2014-11-1-..., although the file time stamp is 9-26-2014, which I hoped contain the old bookmarks. The Sep date led me to believe that this is the old bookmark.
    Can by any chance one of the two non-zero length files in minidump directory contain any sign of the lost bookmark?
    For my benefits, where are the bookmarks stored now? With few sites added in the bookmark, only saw the places.sqlite being updated (in Roaming\...firefox\Profiles\<...>default\places.sqlite*). Did not find any file with name bookmark.*. At one exit saw boomarkbackups …. jsonlz4 file being updated (time stamp).
    Regards

  • HT1277 why i cannot set up my exchange account into my iphone 4s.  everything that needs to input has been provided right, but error says cannot get email not connected to the srver.where seems to be the problem?pls help.btw,i have an outlook for macbook

    please help me find out the solution to the problem.
    My iphone 4S was not able to fetch mails from the server ( outgoing and incoming)
    I was trying to configure my exchange account and follow all the procedures correctly but am having trouble in sending and receiving mails as the error says " cant get mails cannot connect to the server?  where seems to be the problem?
    Have read from the support services that if you using a Pop3 account into another device which I did ( my email was configured via outlook for mac in my macbook) there might be a lock out problem and cannot get emails on the second device which is my iphone?  ( I want to set up my exchange account to my iphone so wherever and whenever i go i cant still access to my email easily. Please help.

    No one seems to be hearing what Big Q is saying.
    He can pair his iPhone to his Macbook, but cannot CONNECT. He's NOT asking for alternative solutions, like Wi Fi.
    I am able to both pair and connect my one one Macbook to my other one, but I can only pair but not connect my iPhone or iPad to either Macbook. So I have the same problem. But I can pair and connect my Macbooks to other Bluetooth devices, like my ancient Nokia cellfone, or my Bluetooth HP printer.
    It's irrelavent that I can instead use a direct USB cable or Wi Fi between my Macbooks and my iPhone/iPad - why can't I use Bluetooth? If Apple does not allow Bluetooth between it's Macbooks and other Mac devices, then why have Bluetooth at all? Does my iPhone have Bluetooth only so that I can pair and connect to my my non Apple mobile handsfree car kit, or communicate easily with the dreaded Apple enemy Samsung, or what?
    Make no mistake , I am a diehard Apple fan, but this Bluetooth non compatibility issue appears shortsighted and seemingly pointless. Why does Apple not just say why they created the non compatibility, or have a message on the Bluetooth setup programme which simply and clearly says "don't bother wasting hours of your time trying to pair and connect your iPhone to your Macbook, because we don't allow that anymore, reason being that............"?
    As a first time user of this Forum I am surprised at the intolerant and highhanded tone of some of the replies  to what is a legitimate question, that is obviously plagueing many, many other Apple users.

  • Pls help putting together the BEST SOLUTION for PP and AE CS4

    Hi guys
    I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
    My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
    What they do and want
    - edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
    - use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
    - needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
    Existing Setups on work stations:
    Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
    4GB RAM DDR2 1066mhz
    Highend motherboards
    GeForce 9500GT , 9800GT, and GTX 260 216sp
    GSKILL Falcon 64GB SSD Drive as primary
    1TB Western Digital BLACK edition drives for storage
    Software:
    Windows XP 32 bit
    Adobe Premiere Pro CS3 (80% of all their work done here)
    AE CS3
    etc..
    Running NOD32 Antivirus
    I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
    I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
    I also read about quadro cards offering really big performance improvements using CUDA tech etc..
    again im not the expert at this type of requirment.. so i need your advises..
    with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
    1) is this the right move?
    2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
    Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
    as you can see im not only looking for the best machine, but the best STRATEGY for my client.
    Good suggestions would be much appreciated.
    regards to all

    in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
    Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
    there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
    if you have to share then you have no choice. this is the one area Abode does not lead.
    renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
    and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
    it also depends on WHAT you are rendering and from what for the HDDs.
    without knowing your work flow format and codec its impossible to suggest something.
    in terms of rendering
    Core i7
    Dual Xeon (faster unless still doing DV/HDV thru firewire)
    Sonnet raid array
    Scott
    ADK

  • TD or Old Toad pls help: Renamed iPhoto Library File....no pics in iPhoto6

    I am working on my parents computer... they have iPhoto 6 and I renamed the iPhoto Library folder in Finder. Obviously this is not a good idea since now there is no content (pics) in iPhoto. 
    This action made a new folder (with the new name) in Finder's 'pictures' file. So, I tried to copy and paste (or maybe I highlighted & moved it, can't recall) the contents of the newly named folder back under the 'iphoto library' folder however, that did not make the photos reappear in iPhoto.
    After moving (I think I highlighted & dragged) the file contents of the newly named folder back in the 'iPhoto Library' folder, I deleted the newly named/created file.
    The individual pics seem to be in the modified & originalsfolder but I do not know how to get them back into iPhoto..
    I attempted to rebuild the iPhoto library but it seemed like an empty request since the computer didnt do anything when this option was selected.
    I know there is a solution but I dont know the smartest nextstep. I have read related discussions that almost provide a solution.
    Currently, I need to figure out a way to:
    1) get what seems to still exist in the modified & original folders back into iPhoto even if it means loosing album names, keywords. I am hoping this route doesn’t wipe out dates from when the images were taken. If there is a way to get them back into iPhoto this route, I need instructions.
    or,
    2) I have a back up of the entire HD on an external HD. Would itbe best to somehow use that to replace what I have on the computer HD? I do not know how to do this so for sure need guidance.
    or,
    3) Find another solution, quickly…
    Thank you so very much as I need to fix this ASAP.

    See my reply in your other thread.
    Regards
    TD

  • Pls help me to modify the query for performance improvement

    Hi,
    I have the below initialization
    DECLARE @Active bit =1 ;
    Declare @id int
    SELECT @Active=CASE WHEN id=@id and [Rank] ='Good' then 0 else 1 END  FROM dbo.Students
    I have to change this query in such a way that the conditions id=@id and [Rank] ='Good' should go to the where condition of the query. In that case, how can i use Case statement to retrieve 1 or 0? Can you please help me to modify this initialization?

    I dont understand your query...May be below? or provide us sample data and your output...
    SELECT *  FROM dbo.students
    where @Active=CASE
    WHEN id=@id and rank ='Good' then 0 else 1 END
    But, I doubt you will have performance improvement here?
    Do you have index on id?
    If you are looking for getting the data for @ID with rank ='Good' then use the below:Make sure, you have index on id,rank combination.
    SELECT *  FROM dbo.students
    where  id=@id
    and rank ='Good' 

  • Pls help me in writing a query for my problem !

    I have to find out the amount(LAmt) for members who lie btw diff age groups, below are the table structures:
    table1
    DOB ID
    12/24/1986 F125
    06/05/1988 F223
    05/04/1987 F589
    07/07/2001 F856
    table2
    LAmt ID LDate
    $56 F125 01/01/2011
    $45 F223 08/22/2005
    $87 F589 09/24/2004
    $87 F856 10/10/2000
    $87 F587 09/09/2002
    Query:
    1) I have to find the age group for the members who lie between 1 to 5 & 6 to 10 and so on, Also find the the no. of days since they have been registered(Using LDate-Current Date) , also the LAmt for those members.

    Hi,
    836810 wrote:
    SELECT -- To calculate Listed Amount of members btw age group 0 to 4
    COUNT(DateOfBirth) as Nopresent,
    DATEDIFF (yyyy,DateOfBirth,GETDATE()) as age,
    SUM(RPTInvHosp.AccountListAmount) as ListedAmt,
    COUNT(DateOfBirth) * SUM(RPTInvHosp.AccountListAmount) as [Calc]
    FROM RPTInv1st,RPTInvHosp
    WHERE
    DATEDIFF (yyyy,DateOfBirth,GETDATE()) >= 0 and
    DATEDIFF (yyyy,DateOfBirth,GETDATE()) < 5 and
    RPTInv1st.PASDebtorID=RPTInvHosp.PASDebtorID
    Group by DATEDIFF (yyyy,DateOfBirth,GETDATE())
    I want to get members btw the particular age group JOIN with the no of days they have been opened an account & their amount.In Oracle, use double-quotes (or nothing) instead of square brackets around aliases:
    COUNT(DateOfBirth) * SUM(RPTInvHosp.AccountListAmount)  as "Calc"The double-quotes are only necessary if you want the alias not to conform to the normal naming conventions; they are optional around normal names, such as CALC.
    There are no built-in functions called GETDATE or DATEDIFF in Oracle.
    In Oracle, SYSDATE returns the current DATE (on the database server).
    There's nothing very convenient in Oracle for getting the difference between two DATEs in units of a year. The best way is to use MONTHS_BETWEEN to get the difference in months, and then divide that number by 12, like this:
    WHERE     FLOOR ( MONTHS_BETWEEN ( SYSDATE
                                , DateOfBirth
               / 12
               )          BETWEEN     0
                         AND     4Do you need help about how to do a join?
    It's not at all clear what you want here.
    Whenever you have a question, post CREATE TABLE and INSERT statements for your sample data, and post the exact results you want from that data. Explain, with specific examples, how you get those results from that data.
    Always say what version of Oracle (or other software) you're using.

  • Pls help...No class found for Datum in OracleXMLquery

    Hello,
    I tried to generate a simple XML document using OracleXMLQuery. But it gives me the following error.
    ==========================
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sql/Datum
    at oracle.xml.sql.query.OracleXMLQuery.<init>(OracleXMLQuery.java:127)
    at testJDBC.main(testJDBC.java:43)
    ==========================
    I was using JDBC.ODBC driver. When I took out the following lines from my code, my code works and returns some information in that table, but of course not XML document.
    ==========================
    OracleXMLQuery qry = new OracleXMLQuery(con,result);
    // get the XML document is the string format
    String xmlString = qry.getXMLString();
    // print out the result
    System.out.println(" OUPUT IS:\n"+xmlString);
    ===========================
    What is wrong with the above paragraph?
    Thank you very much for your help!
    -Steve
    The complete code is attached as follows:
    import java.awt.*;
    import java.awt.event.*;
    import java.sql.*;
    import java.math.*;
    import oracle.xml.sql.query.*;
    public class testJDBC{
    public static void main(String args[]){
    String URL = "jdbc dbc:steveUUdialTest";
    String username = "sa";
    String password = "lamb";
    try {
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    } catch (Exception e1) {
    System.out.println("Failed to load JDBC/ODBC driver.");
    return;
    Statement stmt = null;
    Connection con=null;
    try {
    con = DriverManager.getConnection (URL,username,password);
    stmt = con.createStatement();
    } catch (Exception e2) {
    System.out.println("problems connecting to "+URL);
    try {
    ResultSet result = stmt.executeQuery("SELECT * FROM ModemTable;");
    result.next(); // move to first row
    String name = result.getString("PhoneNumber");
    String temp = "";
    //int cups = result.getInt("cups");
    System.out.println("SELECT * FROM ModemTable;\nPhonenumber=\n "+name);
    // init the OracleXMLQuery; note we could have passed the sql query string
    // instead of the ResultSet
    OracleXMLQuery qry = new OracleXMLQuery(con,result);
    // get the XML document is the string format
    String xmlString = qry.getXMLString();
    // print out the result
    System.out.println(" OUPUT IS:\n"+xmlString);
    con.close();
    }catch (Exception e3) {
    // e.printStackTrace();
    System.out.println("error:"+e3.toString());
    ----------------------------------------

    Are you using JDBC/ODBC to access Oracle,
    or another database? Either should work,
    but just for diagnosing the problem.
    If Oracle, are you using Oracle8 object
    types in your queries?
    Thanks.

  • Urgent pls help!! How to search for an object in vectors?

    Hi,
    I heard that a Vector can store an object right?
    So lets say I created an object called Student that has the attributes: id, name, sex, age
    1) Is vector able to store many students with all these attributes? cos the examples i have seen so far vector only seems to store one attribute
    2) how do i search for sumthin in a vector? let's say i want to key in the student id or his name and find tt student's record to display it?
    thx!

    so sorry... apparantly i didnt copy the last few brackets..
    ===============================================================
    import java.io.*;
    import java.util.*;
    class AddReservation
         static BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
         //Main Method
         public static void main (String[]args)throws IOException
              String custName, comments;
              int covers, date, startTime, endTime;
              int count = 0;
              //User can only add one reservation at a time
              do
                   //Create a new reservation
                   Reservation oneReservation=new Reservation();                         
                   System.out.println("Please enter customer's name:");
                   System.out.flush();
                   custName = stdin.readLine();
                   oneReservation.setcustName(custName);
                   System.out.println("Please enter number of covers:");
                   System.out.flush();
                   covers = Integer.parseInt(stdin.readLine());
                   oneReservation.setCovers(covers);
                   System.out.println("Please enter date:");
                   System.out.flush();
                   date = Integer.parseInt(stdin.readLine());
                   oneReservation.setDate(date);
                   System.out.println("Please enter start time:");
                   System.out.flush();
                   startTime = Integer.parseInt(stdin.readLine());
                   oneReservation.setstartTime(startTime);
                   System.out.println("Please enter end time:");
                   System.out.flush();
                   endTime = Integer.parseInt(stdin.readLine());
                   oneReservation.setendTime(endTime);
                   System.out.println("Please enter comments, if any:");
                   System.out.flush();
                   comments = stdin.readLine();
                   oneReservation.setComments(comments);
                   count++;
              while (count<1);
              class Reservation
              private Reservation oneReservation;
              private String custName, comments;
              private int covers, startTime, endTime, date;
              //Default constructor
              public Reservation()
              public Reservation(String custName, int covers, int date, int startTime, int endTime, String comments)
                   this.custName=custName;
                   this.covers=covers;
                   this.date=date;
                   this.startTime=startTime;
                   this.endTime=endTime;
                   this.comments=comments;
              //Setter methods
              public void setcustName(String custName)
                   this.custName=custName;
              public void setCovers(int covers)
                   this.covers=covers;;
              public void setDate(int date)
                   this.date=date;
              public void setstartTime(int startTime)
                   this.startTime=startTime;
              public void setendTime(int endTime)
                   this.endTime=endTime;
              public void setComments(String comments)
                   this.comments=comments;
              //Getter methods
              public String getcustName()
                   return custName;
              public int getCovers()
                   return covers;
              public int getDate()
                   return date;
              public int getstartTime()
                   return startTime;
              public int getendTime()
                   return endTime;
              public String getComments()
                   return comments;
              //Display the current reservation
              //public void displayReservation()
         //          System.out.println(custName.getcustName());
         //          System.out.println(covers.getCovers());
         //          System.out.println(date.getDate());
         //          System.out.println(startTime.getstartTime());
         //          System.out.println(endTime.getendTime());
         //          System.out.println(comments.getComments());
    ===============================================================
    import java.io.*;
    import java.util.*;
    class searchBooking
         static BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
         public static void main (String[]args)throws IOException
              int choice, date, startTime;
              String custName;
                   //Search Menu
                   System.out.println("Search By: ");
                   System.out.println("1. Date");
                   System.out.println("2. Name of Customer");
                   System.out.println("3. Date & Name of Customer");
                   System.out.println("4. Date & Start time of reservation");
                   System.out.println("5. Date, Name of customer & Start time of reservation");
                   System.out.println("Please make a selection: ");          
                   //User keys in choice
                   System.out.flush();
                   choice = Integer.parseInt(stdin.readLine());
                   if (choice==1)
                        System.out.println("Please key in Date (DDMMYY):");
                        System.out.flush();
                        date = Integer.parseInt(stdin.readLine());
                   else if (choice==2)
                             System.out.println("Please key in Name of Customer:");
                             System.out.flush();
                             custName = stdin.readLine();
                   else if (choice==3)
                             System.out.println("Please key in Date (DDMMYY):");
                             System.out.flush();
                             date = Integer.parseInt(stdin.readLine());
                             System.out.println("Please key in Name of Customer:");
                             System.out.flush();
                             custName = stdin.readLine();
                   else if (choice==4)
                             System.out.println("Please key in Date (DDMMYY):");
                             System.out.flush();
                             date = Integer.parseInt(stdin.readLine());
                             System.out.println("Please key in Start time:");
                             System.out.flush();
                             startTime = Integer.parseInt(stdin.readLine());
                   else if (choice==5)
                             System.out.println("Please key in Date (DDMMYY):");
                             System.out.flush();
                             date = Integer.parseInt(stdin.readLine());
                             System.out.println("Please key in Name of Customer:");
                             System.out.flush();
                             custName = stdin.readLine();
                             System.out.println("Please key in Start time:");
                             System.out.flush();
                             startTime = Integer.parseInt(stdin.readLine());
              public void           
    }

  • Pls help. which java tool to use for math parser?

    hi there
    pls tell me which java tool and classes do i need to use to create a math parser for defferentiation functions. i googled the topic and only got confused. thanks in advance.

    sabbir736 wrote:
    hi there
    pls tell me which java tool and classes do i need to use to create a math parser for defferentiation functions. i googled the topic and only got confused. thanks in advance.You use a CAS (Computer Algebra System) for such a task: not Java. I recommend Maple or Matlab, or if you don't have any money to spend: you could try Maxima: http://maxima.sourceforge.net/ I heard some good things about it.

  • Pls help me in write a join for the following code.

    can any one give me optimized code for the posted query..
    DATA :BEGIN OF BAPITABLE OCCURS 1,
           EDITELEM LIKE TOJTB-EDITELEM,
           FUNCTION LIKE SBAPIS-FUNCTION,
           SHORTTEXT    LIKE TFTIT-STEXT,
           END OF BAPITABLE.
              SELECT     EDITELEM  INTO (BAPITABLE-EDITELEM)
                                   FROM TOJTB
                                   WHERE APPLIC = APPLICATIONCODE
                                   AND MODELONLY = 'R'
                                   and ACTIVE = 'X'.
              SELECT FUNCTION INTO (BAPITABLE-FUNCTION)
                              FROM  SBAPIS
                              WHERE OBJECT = JEDITELEM.
             SELECT STEXT INTO (BAPITABLE-SHORTTEXT)
                          FROM TFTIT
                          WHERE SPRAS = 'EN' AND FUNCNAME = BAPITABLE-FUNCTION.
                         APPEND BAPITABLE.
                             ENDSELECT.
                   ENDSELECT.
           ENDSELECT.
    waiting for ur replies....
    RESHALI

    Hi
    i'm giving you a sample code please change according to your requiirement.
    I've taken required fields from 3 different tables and put them in one internal table.
    please see the following code.
    types : begin of ty_kna1,
             kunnr type kna1-kunnr,
             name1 type kna1-name1,
             vbeln type vbap-vbeln,
             erdat type vbak-erdat,
           end of ty_kna1.
    data : it_kna1 type table of ty_kna1,
           wa_kna1 type ty_kna1.
    data : it_fieldcat type slis_t_fieldcat_alv,
           wa_fieldcat type slis_fieldcat_alv.
    start-of-selection.
      select kkunnr kname1 v1erdat v2vbeln
      into corresponding fields of table it_kna1
      from ( ( kna1 as k
        inner join vbak as v1 on kkunnr = v1kunnr )
        inner join vbap as v2 on v1vbeln = v2vbeln )
        up to 100 rows.
    Reward if helpful
    Regards
    Lakshman

Maybe you are looking for

  • Disk Utility and Bad External Drive

    I have a drive that has just suddenly started to not be recognised by the system. It's a pain but no big deal as I didn't have much on it. However, I don't want to just give up on 200GBs of space and tried to erase/partition it. Nothing happens thoug

  • Would a WD 320Gb drive work in a 1st generation MBP?

    Hi Does anyone know if a "Western Digital Scorpio Black 320 GB - WD3200BEKT" will work in a first generation MacBook Pro? I assume it will but I thought I would check first. TIA, Mark

  • Form/Event Error

    I have the folllowing code in the item event: If pVal.FormTypeEx = "mcgscomm" Then     If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED And pVal.BeforeAction = False Then                 If pVal.ItemUID = "btnOk" Then                     C

  • Bank Reconciliation module

    Hi, How do i use bank reconciliation module? The 'ending balance', do i have to put in exactly the amount which i receive from my montly bank statement? And also the 'ending date', lets say i put it as at end of April (30.04.08), when i review back i

  • Creating duplicate for date range

    Hi folks, How to duplicate date range to other temporary one. eg., r_wadat[] = s_wadat[] it throws error how to do that. thanx rao