Plus signs displaying in calculated field
I have created a form with a table that has a row that calculates automatically. I then created another form that I copied and pasted the table into. In the second form, when my users display or print the form with Adobe 7.0 Standard, the calculating field now displays a plus sign when nothing is entered to calculate. How do I make the plus sign disappear?
Actually, that was my first instinct as well, but it is not the issue. No matter how large I make the fields, no matter where I put them (IE not touching any other fields) - the plus signs still display. The really frustrating thing is that they won't display for me, just for other users. I have Adobe 7.0 Pro and we have just updated our users with Adobe 7.0 Standard. The plus signs do not display for me, but they do for the other users. To make the problem even less consistent, I had the exact same table in another form and in that form the users have used that table without any issues. I merely copied and pasted the table into the new form. I can't see any settings that have been changed. Any ideas?? Even a work around would be great.
Thanks,
Rebecca
Similar Messages
-
Negative sign display for CURR field in ALV grid report
I have a field BETRG defined as CURR field of length 15, decimal places 2. The value may be negative or positive. In case of negative values I am using EDIT_MSK option in the field catalog to bring the negative sign to the left of the value as shown below.
Quote
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'LT_FINAL'
i_inclname = sy-repid
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT fieldcat.
CASE fieldcat-fieldname.
WHEN 'BETRG'.
fieldcat-ctabname = ' '.
fieldcat-cfieldname = ' '.
fieldcat-edit_mask = 'RRV_______________.__'.
ENDCASE.
MODIFY fieldcat.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
i_grid_title = 'ABCD'
is_layout = gs_layout
it_fieldcat = fieldcat[]
i_save = 'A'
is_variant = gs_save
it_events = gs_events
TABLES
t_outtab = lt_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
Unquote
On displaying the report using 'REUSE_ALV_GRID_DISPLAY' as shown above, when the value of BETRG is a smaller number like say 624, then the ALV output appears as '- 624.00' instead of '-624.00'.
Is there any way that I can remove the space in between the negative sign and the number before displaying the ALV output using 'REUSE_ALV_GRID_DISPLAY'?Hi Deepak,
I tried this and found that this doesn't work in case of currency field. Once you move back the char field (with negative sign to the left and condensed) to the currency field, the negative sign again moves back to the right.
I think that the only way a negative sign can be brought to the left of the currenct field is by using edit_mask of field catalog as I have shown above.
Regards,
Shayeree. -
Display of calculated field value in same field using form personalization.
Hi All,
What could be the solution, if i want to have the formula on same display field.
say..your entering value in grams and convert into ml in the same field of (:Q_RES.DISPLAY5)
Conversion formula:
(TO_CHAR(TO_NUMBER(:Q_RES_DISPLAY5)-(0.35))/((1.025)*(0.9986))/3)
When I move out of THIS field, it should convert using above formula and store it in same field.
Appreciate your efforts.
Thanks a lot...What could be the solution, if i want to have the formula on same display field.
say..your entering value in grams and convert into ml in the same field of (:Q_RES.DISPLAY5)
Conversion formula:
(TO_CHAR(TO_NUMBER(:Q_RES_DISPLAY5)-(0.35))/((1.025)*(0.9986))/3)
When I move out of THIS field, it should convert using above formula and store it in same field.
Appreciate your efforts. -
Text in Illustrator CS6 displays the red plus sign but there is no overset text. How can I remove?
I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be deleted. I have cut the text in the box and pasted it into a new text box to no avail. It is not a screen artifact. I have tried copying everything in the file and pasting it into a new file and the little red plus sign comes along. It doesn't print, of course, but is driving me crazy...
I just tried, but the text is point type, not area type, so expanding the box makes the type bigger and doesn’t show extra space that might be there. Looking at the hidden characters doesn’t show any extra returns. I also have a few of these plus signs that seem to be completely disembodied, just floating in space apart from any visible text. Thanks for your suggestion, though.
Amy
starry-logo-Fifth-Press
Amy O'Donnell
Fifth Press
444 East 200 South
Salt Lake City, UT 84111
801.433.6274
<mailto:[email protected]> [email protected] -
Calculated field won't display on canvas
I am importing login and logout times to Xcelsius v 5.4.0.0 using a web service. Once the data is imported I am calculating the minutes between the login and logout by subtracting the login from the logout in the Xcelsius spreadsheet.
I import DATE, USER, LOGIN, & LOGOUT to columns A:D in my spreadsheet. Column E contains the formula D2 - C2 to calculate the minutes, where D2 is the logout and C2 is the login.
I cannot get the calculated times to display on the canvas. I have tried both a list view and a spreadsheet table. I set the DISPLAY DATA property of either the list view or spreadsheet table to columns A:E in my spreadsheet. When I do Preview and import my data, all the data shows up EXCEPT THE MINUTES CALCULATION. That field is always blank.
I tried displaying the raw data tab, and the minutes calc is always blank. I created another tab named display data, added formulas to it to copy over the info from the raw data tab and tried displaying that instead. I thought perhaps the actual calculation was causing a problem. That didnu2019t work either. The minutes calc column is always blank.
I tried changing the format of the labels in the spreadsheet table or list view from general to numeric to time, but it makes no difference. There is no data in the column to format.
If I paste data into the spreadsheet while in design mode, the calculated minutes DO APPEAR in the list view on the canvas. If I then go to Preview mode, the data is still there, including the calculated minutes. However as soon as I give it a new date range in Preview mode and refresh the data through the web service, the minutes column is again blank.
Since the list view does display the calculated minutes if I paste data in the spreadsheet in design mode, and since the exported spreadsheet snapshot contains the correct calculations when I import data using the web service, it appears that the data is being displayed on the canvas before the time calculations are taking place, resulting in a blank column.
Has anyone else experienced this? What am I doing wrong? I am sure I should be able to do this, but evidently donu2019t understand how. Iu2019ve attached the exported spreadsheet snapshot as a reference.
Thanks!Hi there - I checked your site on my PC and it does not display. I've found this on a number iWeb created site, so you are not alone.
However, I have found iWeb created sites that display well on PC's, they are http://leapfrogenterprise.com and http://donandkasha.com - if you view the 'source', notice they used frames to display their site... Best wishes on your project, Rick
iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS Mac OS X (10.4.7) Canon 20D & A620 -
The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?
iOS: Unable to update or restore
-
Displaying calculated field only when data exist
Hello,
Is there a way to display my calculated value only when the data entry field is being used. For instance, if I have several fields vertically aligned, I don't want to display a bunch of zeros if their data fields are not being used.
THANK YOU!!!!You can check for the rawValue in the Calculate event before any script.
Event: Calculate
//FormCalc
if(Field1.rawValue ne null) then
// write your script here
endif
//JavaScript
if(this.rawValue != null){
// write your script here
Thanks
Srini -
How to display positive value with a trailing plus sign
I want to display positive value with a trailing plus sign and negative value with a trailing minus sign. How can I do it? Is there any character in custom format for this? I don't want to convert number to text and use case statement because I need two decimal places and thousands separator.
Okay, try this...
You will need to do a "UNION ALL" of three queries, one for positive values, one for zero values, and one for negative values.
In the "negative values" query, do the following:
1) Add a filter on the measure for values "less than 0"
(This will ensure all values are negative.)
2) In the Data Format tab, select "Custom" and type in #,##0.00-
(This will add the trailing negative sign.)
3) In the Edit Formula tab, add the absolute value function, ABS(insert measure here)
(This will take get rid of the default leading negative sign.)
For the "positive values" query, modify the above as follows:
1) Change the filter to "greater than 0"
2) In the Data format, change the custom format to #,##0.00+
Step 3 is not needed since all values are positive.
For the "zero values" query, just add a filter "equal to zero." -
Issue with web part connections : won't display data when the lookup field is a calculated field
Hello,
I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
filtered.
The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A works fine. But, this is not what
I want.
If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and use sharepoint designer workflow.
Thank you
ChristosHi,
According to your post, my understanding is that you had issues about connecting web parts.
I try to reproduce the issue, however, everything works well.
Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
Create a custom list named List B, add a lookup column named B.A(List A: A.A).
Create a page and then insert the two list view web parts.
Edit page, select List B->Connections->Get Filtered Values From List A.
Then I can filter the List B.
I recommend to create another caculated column and get filter value form it to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
When I press the spacebar, the plus + sign appears. Ideas?
Hi,
I had the same problem this morning, following a cleaning of my Mac wired keyboard (I unplugged it to clean it and then reconnected to my MacBook Pro). After looking at System Prefs and finding nothing, I simply disconnected the keyboard USB and reconnected. No more + sign! Hope it helps you or someone else! -
Plus sign after entering information in PDF Form
Good morning!
I have a PDF form that I made. I'm relatively new at this. Actually this is my first form and my boss is now wanting me to turn more of our forms into fillable PDF's. Which is fine. It was easy to figure out but now I am running into a problem where a plus sign is poping up after entering information. She wants me to fix it but seeing as I am playing around making these it's a bit above my head. Do you know how to get rid of these plus signs? Do you know why this is happening? It only seems to be doing it in these fields as well.
Thanks for the help! It's greatly appreciated.The "+" is used to indicate an text overflow condition or there is more formatted text than can be displayed. One gets rid of this by either making the font size smaller or the size of the text field larger.
Acrobat does not have a dynamic field type or a field that reflows to match the entered text. LiveCycle has this type of form and PDF format but mobile devices cannot yet process LiveCycle created forms. -
DAX Dynamic Banding | Calculated Member based on Calculated Field
Good morning,
I've created a Power Pivot model that measures the blood glucose levels of clinical patients at specific times of the day. The requirement is that this metric, let's call it GlucoseLevel, is always averaged as it wouldn't make sense to sum up the values.
To meet this first requirement, I set the "Summarize By" property of the GlucoseLevel column to "Average".
The second requirement is to band the GlucoseLevel values so that groups of people can be measured by this band rather than by the individual measure values. I created a banding table in Excel and then imported it into the Power Pivot model. The banding table
has three columns (BandName, MinValue and MaxValue) and has the following values:
VERYLOW: Min Value = 0; Max Value = 3.99
OK: Min Value = 4; Max Value = 6.99
WARNING: Min Value = 7; Max Value = 10.99CRITICAL: Min Value = 11; Max Value = 30.00
It is at this point where I face my challenge. I have a GlucoseLevel measure and I have a banding table. Great. The challenge is: How do I create a calculated, dynamic
member that will look at my GlucoseLevel measure (at whatever level), do a lookup to my banding table, and then return the "BandName" column from the Banding table at that specific level? So to clarify what I mean by level: I want to be able
to view the bandings at Year level, or a Month level, or even at a week level. Then depending on what level I am at, my measure should have a Band associated to it.
I've tried to solve this issue in a couple of ways:
Attempt 1
Create a calculated column in my fact table that contains a nested IF statement to manually band my GlucoseLevel values. This works fine if I view my data at the lowest level of granularity, however
it does not work if I start looking at my data at the day, week, month etc. levels
Attempt 2
1.) Create a calculated field (not a calculated column) that averages my GlucoseLevel measure. This is cool because it will average my measure at whatever level I am viewing it at. Let's call
this field Bob...
2.) Band my measure Bob by creating another calculated field (called PatientBand). This field uses my banding table (described earlier) in conjunction with my calculated field Bob. This works perfectly, except for one big flaw: Excel sees this banding field
as a measure, and not as something that I can use as a column / row...
So my question is: Can I trick Excel into viewing my PatientBand calculated field as an attribute, and not as a measure? And if not, how do I get around this challenge? Here is the DAX formula that I used to create my second calculated field "PatientBand":
PatientBand:=CALCULATE(
VALUES (Bandings[BandName]);
FILTER (
Bandings;
Test[Bob] >= Bandings[MinValue]
&& Test[Bob] <= Bandings[MaxValue]
Thanks!So there are 2 ways that I can think of for doing that.
1) if you are only using MDX clients like Excel or Reporting services you can create a text based measure that returns the banding name. (Note that this sort of approach does not work at the moment with PowerView as it only displays numeric measures). This
would effectively let you show a label next to a reading as opposed to moving the reading under a given banding column.
Banding Name :=
CALCULATE (
VALUES ( Bands[BandName] ),
FILTER (
Bands,
[Average of GlucoseReading] >= Bands[BandMin]
&& [Average of GlucoseReading] <= Bands[BandMax]
&& NOT ( ISBLANK ( [Average of GlucoseReading] ) )
2) This next approach will show the results exactly as you had them in your sample screenshots. It just takes a slight bending of the DAX. I'm using a SUMX here, not because I want to sum anything, but because the "X" version of SUMX basically loops over
every row in the specified table and sums the expression in the second parameter. I have setup the second parameter so that it only returns a single value for the average if it is in the appropriate banding.
Banded Average:=IF (
HASONEVALUE ( Bands[BandName] ),
SUMX(
'Bands',
IF (
NOT ( ISBLANK ( [Average of GlucoseReading] ) )
&& [Average of GlucoseReading] >= MIN ( Bands[BandMin] )
&& [Average of GlucoseReading] <= MIN ( Bands[BandMax] ),
AVERAGE(Readings[GlucoseReading]),
BLANK()
,AVERAGE(Readings[GlucoseReading])
http://darren.gosbell.com - please mark correct answers -
Problem with Math In Calculated Fields
I am calculating a group incident rate for data returned from
a query. The formula is Number of cases multiplied by 200000
divided by number of hours worked. Cases in my report is the
calculated field: calc.CaseSum (the sum of cases for the group)
Hours is calc.SumHours (the sum of hours for the group). The actual
values for these variables (for the first group are 48 and 29427171
respectively. When I create the following calculated field called
rate using the formula: (calc.CaseSum * 200000) / calc.SumHours,
Cold Fusion Generates a Runtime Error:
Invalid ColdFusion expression in report. If the expression is
a string, ensure that it is within quotes. Error: (calc.CaseSum *
200000) / calc.SumHours is not a valid ColdFusion expression.
If I use the constant value "29427171" as the divisor, the
report works albeit only for the first group. Any ideas; is this a
bug, or am I misusing the product?
Addition: I forgot to mention I am using CF8. Also this
formula worked fine as a Report Total before I introduced grouping
and modified the calculated fields to reset on the change of a
group.Sorry, I've been on another project for awhile. This problem
will certainly be a "show stopper" for me if I cannot resolve it.
As I mentioned in my original post, I used a constant in the
formula in lieu of the variable and the calculation worked. This
would suggest that CF does not have a problem with a large number.
In spite of that reasoning, I tried Tony's suggested (thanks
by the way!) with the identical outcome, only difference is the new
formula is displayed in the error message.
Tony, you also suggested that I set the variables using
CFSET... How would I do this within the report writer environment.
I had tried a similar approach: to perform half the calculation
i.e. that within the parenthesis, and assign that value to a
separate "calculated field: and then perform the rest of the
calculation on that variable with the same outcome.
I think that I may be dealing with a CF bug here, I'd like to
find a workaround... I've noticed that CF8 has a new patch, perhaps
after I apply it, I may be able to get this thing to work. I'm on
another project right now so it will be a few days before I can
test this theory, I report the result.
Should this fail, and no one can come up with a workaround, I
will report this to Adobe. -
Running total of calculated field in pivot
VERSION: ORACLE 11
TABLE:
create table chart_detail (
DIS NUMBER,
BLD_MO VARCHAR2(7),
BLD NUMBER(10),
RPLC NUMBER(10));DATA:
insert into chart_detail values (60,'2011-03',0,2);
insert into chart_detail values (150,'2011-04',10572,0);
insert into chart_detail values (120,'2011-04',26449,5);
insert into chart_detail values (30,'2011-04',0,1);
insert into chart_detail values (60,'2011-04',0,7);
insert into chart_detail values (90,'2011-04',0,9);
insert into chart_detail values (120,'2011-05',5714,0);
insert into chart_detail values (90,'2011-05',24557,1);
insert into chart_detail values (60,'2011-05',0,4);
insert into chart_detail values (30,'2011-05',0,0);
COMMIT;EXPECTED RESULTS:
2011-04 2011-05
DIS RPLC BLD TBLD IPTV RPLC BLD TBLD IPTV
30 1 0 37021 0.03 0 0 30271 0.00
60 7 0 37021 0.22 4 0 30271 0.13
90 9 0 37021 0.46 1 24557 30271 0.17
120 5 26449 37021 0.59 0 5714 5714 0.17
150 0 10572 10572 0.59 0
180 0 0
TOTAL 22 37021 5 30271 PROBLEM: I need to have a running total of IPTV like in the above example. I can get the IPTV for each DIS/bld_mo but I don't know how to get the running total of it. In the script below I just used an example where I tried summing the IPTV like was done for build. I know it can't be done that way because IPTV is a calculated field in the query but if I substitute "APR_IPTV" with the formula for IPTV I get an error that window functions aren't allowed here. I do not know a way around this. I commented out the bad piece of code.
PROBLEM SCRIPT:
WITH pivot_results AS
SELECT dis
, NVL (apr11_rep, 0) AS apr11_rep
, NVL (apr11_bld, 0) AS apr11_bld
, NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tbld
, DECODE(NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(apr11_rep, 0)*1000/ NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS apr11_iptv
, NVL ( SUM (apr11_iptv)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tiptv
, NVL (may11_rep, 0) AS may11_rep
, NVL (may11_bld, 0) AS may11_bld
, NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS may11_tbld
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_iptv
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_tiptv
FROM chart_detail
PIVOT ( MAX (rplc) AS rep
, MAX (bld) AS bld
FOR bld_mo IN ( '2011-04' AS apr11
, '2011-05' AS may11
SELECT CASE
WHEN GROUPING (dis) = 0
THEN TO_CHAR (dis)
ELSE 'Total'
END AS dis
, SUM (apr11_rep) AS apr11_rep
, SUM (apr11_bld) AS apr11_bld
, SUM (apr11_tbld) AS apr11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (apr11_iptv)
END AS apr11_iptv
, SUM (apr11_tiptv) AS apr11_tiptv
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (apr11_tpiptv)
END AS apr11_tiptv
, SUM (may11_rep) AS may11_rep
, SUM (may11_bld) AS may11_bld
, SUM (may11_tbld) AS may11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN SUM (may11_iptv)
END AS may11_iptv
FROM pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Thank you,Hi,
So you know how to compute iptv for an individual row; the problem now is that you want to get a running total of iptv; is that it?
The problem there is that computing iptv requires an analytic function, and analytic functions can't be nested. To get the results of nesting f (g (x)), where f and g are analytic funtions, you have to compute g in a sub-query, and then use the results as the argument to f in a super-query.
Here's how to apply that to your situation:
WITH pivot_results AS
SELECT dis
-- April, 2011
, NVL (apr11_rep, 0) AS apr11_rep
, NVL (apr11_bld, 0) AS apr11_bld
, NVL ( SUM (apr11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS apr11_tbld
, NVL ( 1000 * apr11_rep
/ NULLIF ( SUM (apr11_bld) OVER (ORDER BY dis DESC)
, 0
, 0
) AS apr11_iptv
-- May, 2011
, NVL (may11_rep, 0) AS may11_rep
, NVL (may11_bld, 0) AS may11_bld
, NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0
) AS may11_tbld
, NVL ( 1000 * may11_rep
/ NULLIF ( SUM (may11_bld) OVER (ORDER BY dis DESC)
, 0
, 0
) AS may11_iptv
FROM chart_detail
PIVOT ( MAX (rplc) AS rep
, MAX (bld) AS bld
FOR bld_mo IN ( '2011-04' AS apr11
, '2011-05' AS may11
SELECT CASE
WHEN GROUPING (dis) = 0
THEN TO_CHAR (dis)
ELSE 'Total'
END AS dis
-- April 2011
, SUM (apr11_rep) AS apr11_rep
, SUM (apr11_bld) AS apr11_bld
, SUM (apr11_tbld) AS apr11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN ROUND ( SUM (SUM (apr11_iptv))
OVER (ORDER BY dis)
, 2
END AS apr11_iptv
-- May 2011
, SUM (may11_rep) AS may11_rep
, SUM (may11_bld) AS may11_bld
, SUM (may11_tbld) AS may11_tbld
, CASE
WHEN GROUPING (dis) = 0
THEN ROUND ( SUM (SUM (may11_iptv))
OVER (ORDER BY dis)
, 2
END AS may11_iptv
FROM pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Output:
APR11 APR11 APR11 APR11 MAY11 MAY11 MAY11 MAY11
DIS _REP _BLD _TBLD _IPTV _REP _BLD _TBLD _IPTV
30 1 0 37021 .03 0 0 30271 .00
60 7 0 37021 .22 4 0 30271 .13
90 9 0 37021 .46 1 24557 30271 .17
120 5 26449 37021 .59 0 5714 5714 .17
150 0 10572 10572 .59 0 0 0 .17
Total 22 37021 158656 5 30271 96527As you can see, this is not quite what you wanted on the row where dis='150'. You asked for NULLS in the may11_rep, may11_bld and may11_iptv columns. You can get those results if you need them; just explain the rules that govern whether to display the values and when to display NULL.
The way you posted the sample data and results, and the quantity of sample data were all excellent; it really helped me find a solution. Thanks.
It would have also helped it you had explained how iptv is computed. Basically, iptv = 1000 * rep / tbld, right?
It looks like most of this code:
, DECODE(NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
OVER (ORDER BY dis DESC)
, 0),2
)) AS may11_iptvwas a way of avoiding divide by 0 errors; it would have been helpful if you had explained that. -
When output SSRS report to Excel, Plus sign was moved to the far left pane in Excel. How to fix it?
Hi there:
I've created a SSRS report and looks good inside Report Manager, See below . plus "+" is in the right place and
if I click it, it will expand.
However, when I output results into excel, it becomes this, notice those plus sign "+" have been shifted to the far left and they are
not line up with each month either... Is there any way to fix in the excel so that users could see exactly what they see in the Report Manger?
Thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hi cat_ca,
Microsoft Excel has limitations with how it manages hidden and displayed report items when they are exported. When we export a report to Microsoft Excel format, groups, rows, and columns that contain report items that can be toggled are rendered as Excel
outlines. Excel creates outlines that expand and collapse rows and columns across the entire row or column which can cause the collapse of report items that are not intended to be collapsed. This is by design. For more information about this, please see Show
and Hide section in the link below:
http://msdn.microsoft.com/en-IN/library/dd255234.aspx#ReportItemsExcel
The following similar thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/06303610-5f6b-4c90-80a6-628552a3d36c/ssrs-2008-table-with-line-grouping-excel-export-problem-with-toggle-item?forum=sqlreportingservices
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
How to restrict access to portal when LDAP is used ?
Hello, We implemented an XSS portal using Active Directory as user source. However we are facing a worry : all declared users in LDAP are allowed to connect to portal, even they are not declared within our ECC6 backend. I have been told that in an no
-
Get and Put options are greyed out in DW CS4
I am a fairly green Dreamweaver user, and recently (finally) upgraded from MX4 to CS4. I am trying to get a file from my local c:drive and both the get and put functions are greyed out. Any idea how to enable these functions? I do not have the fil
-
Kernel error plzz help me to resolve this. Its my damm new laptop. Its been a week.
-
Best Method For Connection - JDev Team Help
Hi, We are using a couple of different methods for obtaining a connection and pooling. I'm wondering what is the best method, though...if there is a preferred approach? One approach is getting the ApplicationModuleRef from the request. We then releas
-
Return line and format bold in text Objetc
In CrystalReports how to insert return line in text Objetc and how to apply format bold to some word inside a paragraph. ¿Exist some internal command of Crystal that he indicates that from a position within the paragraph he is applied format bold?