Plz chk the query
SELECT T0.[AcctName], T1.[Debit], T2.[U_SLRemark], T3.[RefDate], T3.[Number], T4.[Name], T5.[U_Project] FROM OACT T0 INNER JOIN JDT1 T1 ON T0.AcctCode = T1.Account INNER JOIN VPM4 T2 ON T0.AcctCode = T2.AcctCode INNER JOIN OJDT T3 ON T1.TransId = T3.TransId, [dbo].[@OSLA] T4, [dbo].[@SLT1] T5
in output all the rows are repeating even i used distinct also
plz help
hai,
Just try this,
SELECT T0.AcctCode,T0.AcctName, T1.Debit, T2.U_SLRemark, T3.RefDate, T3.Number, T4.Name, T5.U_Project FROM OACT T0 INNER JOIN JDT1 T1 ON T0.AcctCode = T1.Account INNER JOIN VPM4 T2 ON T0.AcctCode = T2.AcctCode INNER JOIN OJDT T3 ON T1.TransId = T3.TransId, dbo.@OSLA T4, dbo.@SLT1 T5 group by T0.AcctCode
Thanks.
Similar Messages
-
hi
can any one execute the following code n tell me y its not workin...
actually the file is getting downloaded and it opens by excel but not with the pdf.
REPORT z_output_pdf.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA:wa_ekpo TYPE t_ekpo,
p_repid LIKE sy-repid,
it_ekpo TYPE STANDARD TABLE OF t_ekpo.
DATA : lv_repid TYPE sy-repid,
lv_uname TYPE sy-uname.
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i.
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
lv_repid = sy-repid.
lv_uname = sy-uname.
SELECT ebeln matnr
FROM ekpo
INTO TABLE it_ekpo.
LOOP AT it_ekpo INTO wa_ekpo.
WRITE :/ wa_ekpo-ebeln, wa_ekpo-matnr.
ENDLOOP.
DATA: print_parameters TYPE pri_params,
valid_flag(1) TYPE c,
mi_rqident LIKE tsp01-rqident.
DATA: p_linsz TYPE sy-linsz VALUE 132, " Line size
p_paart TYPE sy-paart VALUE 'X_65_132'. " Paper Format
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_parameters = print_parameters
valid = valid_flag
EXCEPTIONS
invalid_print_params = 2
OTHERS = 4.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
print_parameters-linsz = p_linsz.
print_parameters-paart = p_paart.
print_parameters-pdest = 'LOCL'.
*SUBMIT (lv_repid) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS print_parameters
VIA SELECTION-SCREEN
AND RETURN.
*IF sy-subrc <> 0.
WRITE :' error'.
*ENDIF.
*-- Find out what the spool number is that was just created
PERFORM get_spool_number USING lv_repid
lv_uname
CHANGING mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = mi_rqident
no_dialog = space
dst_device = print_parameters-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = it_ekpo.
write :' ============'.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
FORM get_spool_number USING f_repid
f_uname
CHANGING f_rqident.
DATA:
lc_rq2name LIKE tsp01-rq2name.
CONCATENATE f_repid+0(8)
f_uname+0(3)
INTO lc_rq2name SEPARATED BY '_'.
DATA : ls_tsp01 TYPE tsp01,
lt_tsp01 TYPE TABLE OF tsp01.
SELECT * FROM tsp01
INTO TABLE lt_tsp01
WHERE rq2name = lc_rq2name
ORDER BY rqcretime DESCENDING.
LOOP AT lt_tsp01 INTO ls_tsp01.
f_rqident = ls_tsp01-rqident.
EXIT.
ENDLOOP.
SELECT * FROM tsp01 WHERE rq2name = lc_rq2name
ORDER BY rqcretime DESCENDING.
f_rqident = tsp01-rqident.
EXIT.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR f_rqident.
ENDIF.
ENDFORM." get_spool_number
plz chk n tell me where its goin wrong....
Message was edited by:
neha guptaHi neha,
i do it in this way:
REPORT ZGRO_ITAB_PDF_SPOOL.
DATA: BEGIN OF ITAB OCCURS 0,
TEXT(72),
END OF ITAB.
Länge der PDF-Datei in Byte
DATA: PDF_FILESIZE TYPE I.
DATA: BIN_FILESIZE TYPE I.
Druckparameter mit Gültigkeit
DATA: PARAMS LIKE PRI_PARAMS,
VALID TYPE C.
Spoolnummer
DATA: SPOOL_NR LIKE TSP01-RQIDENT,
SPOOL_NR_DEL LIKE TSP01_SP0R-RQID_CHAR.
PDF Ausgabetabelle
DATA: BEGIN OF PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF PDF_OUTPUT.
DATA: PROGRAM(128) TYPE C.
DATA: DATEI TYPE STRING VALUE 'D:TESTPDF.PDF'.
DATA: APPL TYPE STRING.
START-OF-SELECTION.
Druckparameter besorgen (hier für LOCA)
Line-size sollte entsprechende der Ausgabe gesetzt werden
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
DESTINATION = 'LOCA'
LINE_SIZE = 080
IMMEDIATELY = ' '
NO_DIALOG = 'X'
IMPORTING
OUT_PARAMETERS = PARAMS
VALID = VALID.
CHECK VALID <> SPACE.
Versorgen der internen Tabelle
READ REPORT 'ZGRO_ITAB_PDF_SPOOL' INTO ITAB.
Ausgabe der internen Tabelle mit den Druckparametern.
NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG NO-TITLE NO-HEADING.
LOOP AT ITAB.
WRITE:/ ITAB.
ENDLOOP.
NEW-PAGE PRINT OFF.
Spoolnummer besorgen
SPOOL_NR = SY-SPONO.
Konvertierung der Ausgabe nach PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = SPOOL_NR
IMPORTING
PDF_BYTECOUNT = PDF_FILESIZE
TABLES
PDF = PDF_OUTPUT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
CHECK SY-SUBRC = 0.
SPOOL_NR_DEL = SPOOL_NR.
Spool wieder löschen
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = SPOOL_NR_DEL.
BIN_FILESIZE = PDF_FILESIZE.
Download der Spools
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
FILENAME = DATEI
FILETYPE = 'BIN'
CHANGING
DATA_TAB = PDF_OUTPUT[].
Programmpfad auf PC für PDF ermitteln
CALL FUNCTION 'SO_PROGNAME_GET_WITH_PATH'
EXPORTING
DOCTYPE = 'PDF'
IMPORTING
PATHNAME = PROGRAM
EXCEPTIONS
PATH_NOT_FOUND = 1
PROGRAM_NOT_FOUND = 2
NO_BATCH = 3
X_ERROR = 4
OTHERS = 5.
PDF ausführen
APPL = PROGRAM.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
PARAMETER = DATEI
APPLICATION = APPL.
Programmende *
Regards, Dieter -
Plz chk the code wats wrong in it
hi
i m having itab with vbeln
and ztable with objnr and ordsent.
where objnr and vbeln are equal
so now when i find objnr EQ vbeln i have to modify the ztable-ordsent = ' '.
i have writen the followin code
LOOP AT lt_ztsd2marc INTO ls_ztsd2marc.
READ TABLE ct_success INTO ls_success WITH KEY ordnr =
ls_ztsd2marc-ordnr.
IF sy-subrc EQ 0.
ls_ztsd2marc-ordsent = ' '.
MODIFY TABLE lt_ztsd2marc FROM ls_ztsd2marc TRANSPORTING ordsent .
MODIFY ztsd2marc FROM TABLE lt_ztsd2marc.
IF sy-subrc EQ 0.
MESSAGE s112(z2).
ENDIF.
ENDIF.
ENDLOOP.
its updating it in work area but the changes are not gettin reflected in the internal table and not even in my ztable ztsd2marc.
plz tell me wat is wrong in this code?hi..
jus try the code below.. it'll def give the solution to ur question.
i've jus modified little of ur code that u posted.
LOOP AT lt_ztsd2marc INTO ls_ztsd2marc.
READ TABLE ct_success INTO ls_success WITH KEY ordnr =
ls_ztsd2marc-ordnr.
IF sy-subrc EQ 0.
ls_ztsd2marc-ordsent = ' '.
MODIFY TABLE lt_ztsd2marc FROM ls_ztsd2marc TRANSPORTING ordsent
where ordnr = ls_ztsd2marc-ordnr .
**MODIFY ztsd2marc FROM TABLE lt_ztsd2marc.
update ztsd2marc set ordsent = it_ztsd2marc-orsent
where ordnr = it_ztsd2marc-ordnr.
IF sy-subrc EQ 0.
MESSAGE s112(z2).
ENDIF.
ENDIF.
ENDLOOP.
all the best -
==================================
PERFORM get_spool_number USING sy-repid
sy-uname
CHANGING mi_rqident.
=====================================
FORM get_spool_number USING f_repid
f_uname
CHANGING f_rqident.
DATA:
lc_rq2name LIKE tsp01-rq2name.
CONCATENATE f_repid+0(8)
f_uname+0(3)
INTO lc_rq2name SEPARATED BY '_'.
SELECT rqident FROM tsp01 WHERE rq2name = lc_rq2name
ORDER BY rqcretime DESCENDING.
f_rqident = tsp01-rqident.
EXIT.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR f_rqident.
ENDIF.
ENDFORM." get_spool_number
Field list without INTO clause is not allowed . allowed. . allowed. .
is the error i m getting when i activate it..
what is the error in select query....Hi,
try this
==================================
PERFORM get_spool_number USING sy-repid
sy-uname
CHANGING mi_rqident.
=====================================
FORM get_spool_number USING f_repid
f_uname
CHANGING f_rqident.
DATA: lc_rq2name LIKE tsp01-rq2name.
CONCATENATE f_repid+0(8) f_uname+0(3)
INTO lc_rq2name SEPARATED BY '_'.
SELECT rqident INTO tsp01-rqident FROM tsp01
WHERE rq2name = lc_rq2name
ORDER BY rqcretime DESCENDING.
f_rqident = tsp01-rqident.
EXIT.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR f_rqident.
ENDIF.
ENDFORM." get_spool_number
Make sure that u have declared teh TABLES: tsp01.
Hope thsi solves ur problem.
Reward points and close the thread if ur problem got solved. -
Plz help in optimizing the query
I have a query which is written to cater to the scenario that the entered start and end date do not overlap with the start and end date already present in the database records. Can someone help in optimizing this query. all inclusion and exclusion scenario's have to be taken care of.
the query is as follows:
SELECT COUNT(*) FROM CLAS WHERE TRIM(UPPER(CLAS_CDE)) =UPPER('timecheck') AND TRIM(UPPER(CLAS_TYPE_CDE))=UPPER('TEST_3')
AND TRIM(UPPER(LANG_CDE))=UPPER('en')
AND (
(END_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR
(START_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR (
(START_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
AND
(END_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR(('09/13/2007' BETWEEN TO_CHAR(START_DT,'MM/DD/YYYY') AND TO_CHAR(END_DT,'MM/DD/YYYY'))
AND ('09/15/2007' BETWEEN TO_CHAR(START_DT,'MM/DD/YYYY') AND TO_CHAR(END_DT,'MM/DD/YYYY'))
);I format your code in different way:
SELECT COUNT(*)
FROM CLAS
WHERE TRIM(UPPER(CLAS_CDE)) = UPPER('timecheck')
AND TRIM(UPPER(CLAS_TYPE_CDE))=UPPER('TEST_3')
AND TRIM(UPPER(LANG_CDE))=UPPER('en')
AND (
(END_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR
(START_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR (
(START_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
AND
(END_DT BETWEEN TO_DATE('09/13/2007','MM/DD/YYYY') AND TO_DATE('09/15/2007','MM/DD/YYYY'))
OR (
('09/13/2007' BETWEEN TO_CHAR(START_DT,'MM/DD/YYYY') AND TO_CHAR(END_DT,'MM/DD/YYYY'))
AND
('09/15/2007' BETWEEN TO_CHAR(START_DT,'MM/DD/YYYY') AND TO_CHAR(END_DT,'MM/DD/YYYY'))
);First thought that cross my mind it to check if changing this:
UPPER('timecheck') to simple:
'TIMECHECK' and do the same with other expressions with UPPER function.
Peter D. -
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr -
Error when using "inlist operator" in the query filter of Webi 3.1
Hi,
We are currently in the process of migrating Deski to webi (BOXI 3.1).
The problem is, Deski is using the "inlist" operator which is working fine but after migrating to webi the inlist operator in the query filter is throwing the below error,
*Error Message :*
A database error occured. The database error text is: ORA-00907: missing right parenthesis. (WIS 10901)
Appreciate your assistance on this.
Thanks !
Regards,
PerialtKarthik ,
Yes I am seeing an additional paranthesis in Webi SQL query.
For example plz consider the product table below,
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN ( @Prompt('4) Name:','C','Product\Name-M',multi,free) )
As a work around in Custom SQL, If I remove the paranthesis the below query is running fine in webi
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN @Prompt('4) Name:','C','Product\Name-M',multi,free)
But I want a permanent solution. -
While executing the query in the web template I am facing below issue
Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
AlokHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
While running the query how much time it will taken, I want to see the time
Hi Folks
I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
Plz let me know the answer.......Hi Ravi,
The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
Good luck -
Error while executing the query in RSRT
Hi to all,
I am executing the query in client development system in RSRT.
Error coming (Query could not open Genun id is invalid)
I shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
ERROR displaying in the query output... urgetn
hi experts,
For the amount keyfigures in the query output it displaying ERROR after the amount like ex- 2000 ERROR.
plz let me know how to rectify this..
regards
vadlamudihi,
i have created only two keyfigures EMP_BASIC and EMP_HRA. and in the transformations i have mapped with 0DOC_CURRCY.
but in the report its showing ERROR only after the amount. plz tell me exactly with what field i need to map???
regards
vadlamudi -
Customer Exit not called upon in the Query...
Dear Guys,
I am working on the "Slow Moving Item(MC46)" report in BW.We need "No.of Days Not consumed" in the Input selection screen in the BW Query.We tried creating a Formula variable upon "Calday" with Data type "Numeric" and then a Customer Exit is called to the Subtract the "No. of days not consumed" from "Today's date(System Date)" and gives the result as "Earlier date" .
(Eg: Today's Date : 04-04-08
No. of Days Consumed : 30
ZSlow_Mov_Date : 03-03-08).
But for some reason the Customer exit is not called upon when we execute the Query (RSRT-->Execute + Debug option)..Can someone take time to throw some light on this,plz?
Manythanks
ArunHello Arun,
In the User Exit Code, please check at what I_STEP value the variable exit is called.
See this link for more info about I_STEP
[Dependencies for Variables of Type Customer Exit |http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm]
Thanks
[Chandran|http://chandranonline.blogspot.com/] -
How to change the query ?
Gurus,
Please clarify this
Select ils.item,(nvl(sum(decode(tdh.loc_type,'S',decode(tdh.tran_code, 1,tdh.units,0),
'W',decode(tdh.tran_code,30,0,31,0,32, tdh.units,33, tdh.units,37,0,38, tdh.units,20,0,1,0))),0))"result"
from tran_data_history tdh, item_loc_soh ils
where tdh.item = ils.item
and ils.item in('100002513','100002484')
and trunc(tdh.TRAN_DATE)
between (*select first_date from (select item,min(trunc(first_received)) first_date From Item_loc_soh*
where item in('100002513','100002484') and first_received is not null
group by item ))
and trunc(sysdate)
group by ils.item
Problem with this query is, the block mentioned in BOLD is returning two rows, and I am writing between and clause .. since the query in bold is returning more than one row, it is throwing error stating that single query returns more than one row .. Requirement is, whatever date which is returned with value 100002513 should be compared with sysdate, and other value 100002484 should be compared with sysdate .. Irrespective of number of items (whether 1 or more than 1) should simultaneously be compared with sysdate
How to change my query
RegardsInner query
Select First_Date From (Select Item, Min(Trunc(First_Received)) First_Date
From Item_Loc_Soh *
Where Item In ('100002513', '100002484')
And First_Received Is Not Null
Group By Item)
this will return 2 rows for each of the item id 2513 and 2484 because you write query for this 2 rows
and select min date
which means
item id 2513 min date
item id 2482 min date
if you want to compare just a date to sysdate then do it directly,
Select Ils.Item,
(Nvl(Sum(Decode(Tdh.Loc_Type,
'S',
Decode(Tdh.Tran_Code, 1, Tdh.Units, 0),
'W',
Decode(Tdh.Tran_Code,
30,
0,
31,
0,
32,
Tdh.Units,
33,
Tdh.Units,
37,
0,
38,
Tdh.Units,
20,
0,
1,
0))),
0)) "result"
From Tran_Data_History Tdh, Item_Loc_Soh Ils
Where Tdh.Item = Ils.Item
And Ils.Item In ('100002513', '100002484')
And Trunc(First_Received) = Sysdate;
however i dont understand importance of Tdh.Tran_Date and which date you exactly want to compare
hope this helps,
if not plz clarify more on the questionsEdited by: Nicloei W on Sep 24, 2008 11:51 PM -
Where to chk the PipeLine process steps in BPM Scenario...
hi experts,
i hav a scenario where i need to send multile file formats to an synchronous R/3 system and from R/3 it needs to be forwarded to the Target system in file format... its a BPM scenario...
i need to CHK the sequence of Steps or Pipeline process to knw where exaclty the message is at each piont of time...
can any one help on this plz...
Thanks and Regards,
Srinivasits possible to do the same using the ALERT Framework also...for the same pls go through the info provided below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Also go through these blogs:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken]
The specified item was not found.
The specified item was not found.
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope it helps you in finding a solution to your problem. -
Including 0fiscvarnt in the query
Hi,
There is no FISCAL YEAR VARIANT in the left panel of the query designer, but still I can see 0fiscvarnt in the filter area of a query, I am creating another query on the same infocube and I am not able to include 0fiscvarnt in the filter area even If I drag and drop 0fiscper..plz help me
Thankshi
0fiscvarnt is compounding 0fiscper. So when you drag n drop 0fiscper by default 0fiscvarnt will also come.
You can drag back 0fiscvarnt if you do not want it.
Maybe you are looking for
-
Please help me sync my iPad as it is not able to sync after a system update. Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,
-
How do i get the file properties of any file in the phone?
i need to get the meta data / properties of files in the phone. in addition, i will need the song title, artist, genre, etc information from video and audio files. can somebody help?
-
Query with the days of a period and the same days of last year
I need a help. We have a sales cube with daily values. We have a query that restricts a month (0CALMONTH) and shows the daily values for this month. No problem, we have only to put 0CALDAY on the line and the value on the columns. But we need also to
-
HT3275 TIme Machine deleting files I deleted from my home drive
This seems like a very basic problem but I cant find an answer and am no longer able to use Apple Support. I am trying to erase files from my very crowded home drive. I bought an external drive and backed up all fikles there. However, now when I d
-
Downloading PS Elements 11?
I am having trouble installing Photoshop Elements 11 from a download. I have tried to download several times using both methods of download, but keep getting the same error message. "A problem occured while extracting the archive. Please try download