PM Order User EXIT IWO10007 : permits in Order
Dear Experts,
I want to know, the significance of this exit IWO10007. My requirement is to derive the permit in PM order based on certain condition which is not being catered by using CSEVPERMIT structure . How this exit can be used for the same..
For Example:
Case -1: Change in Planned Cost after Release the order- A permit to be derive and it shoud restrict the goods movement against the order/reservation.
Case- 2 : in a specific material is used in component and it is returned or issued then a permit is to be derived and it must be issued befor TECO the pm order.
further more : How to send a mail when a permit is issued for pm order.
If any one having any idea about it kindy guide me in this regard.
in Continuation of above requirement, Can we append CSEVPERMIT Structure as per our required fields.
Edited by: RAJ VERMA on Nov 17, 2011 11:49 AM
Hi,
To check the purchasing group on the component lines use exit CNEX0026. This is called whenever a component is created or changed.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics
Similar Messages
-
User exit: save PM order
Dear all,
I'm looking for an user exit that will be actived during order save. However, it seems most exits just for check, I can not change any data.
The requirement is: if user save certain order, then field function area 'CAUFVD-FUNC_AREA' is filled automatically. This fiels in the order header.
Thanks,
BenHi,
Orders
User Exits BBPK0001
Description Exit for determining the external procurement profile
User Exits CNEX0013
Description Default item category for component assignment
User Exits CNEX0026
Description Customer enhancement for general inspection of material
User Exits CNEX0027
Description Customer enhancement: Plant, storage loc. finding for comp.
User Exits CNEX0037
Description Check new component
User Exits COCCA002
Description Customer Functions for Organizational Authorization Checks (SETTLEMENT)
User Exits COI20001
Description Changing of person found
User Exits COI20002
Description Alternative procurement of HR availability data
User Exits COOM0001
Description Customer Functions for Overhead Percentages
User Exits COOPA_01
Description Customer check modules for internal orders
User Exits COOPA002
Description Customer function for master data maintenance - internal orders
User Exits COOPA003
Description User-Defined Fields in the Order Master
User Exits COOPA004
Description Customer function: Print order master data
User Exits COPCP005 (see: 1, )
Description Material Costing: User exit for material valuation (strategy U)
User Exits CY190001
Description Capacity Planning: Change order operation
User Exits COZF0001
Description Change purchase req. for externally processed operation
User Exits COZF0002
Description Change purchase req. for externally procured component
User Exits CYPP0001
Description Change sequence criteria and sequencing
User Exits ICSV0001
Description Display of geographic location data
User Exits ICSV0002
Description Automatic task determination for service notifications
User Exits ICSV0003
Description Partner selection
User Exits ICSV0004
Description Check PM object and display object information
User Exits ICSV0005
Description Determining reason for rejection - resource-related billing
User Exits ICSV0008
Description Validation of additional partner types
User Exits IWMI0001
Description User exits for SM/PM IDOCs
User Exits IWO10001
Description Create a PM sub-order
User Exits IWO10002
Description Customer check for order release
User Exits IWO10004
Description Customer check for order completion
User Exits IWO10005
Description Customer specific determination of profit centre
User Exits IWO10006
Description FCode exclusion through customer enhancement
User Exits IWO10007
Description Customer enhancement - permits in the order
User Exits IWO10008
Description Customer enhancement: Determination of tax jurisdiction code
User Exits IWO10009
Description Customer Check for 'Save' Event
User Exits IWO10010
Description Customer enhancement for determining WBS element
User Exits IWO10011
Description Customer enhancement for component selection
User Exits IWO10012
Description Priority handling on central header
User Exits IWO10015
Description F4 Help for user fields on operation
User Exits IWO10016
Description Customer enhancement to check operation user fields
User Exits IWO10017
Description Determine external order number by customer logic
User Exits IWO10018
Description User fields on order header
User Exits IWO10020
Description Automatically include task list
User Exits IWO10021
Description Automatic task list transfer when creating order from notification
User Exits IWO10022
Description Determine calendar from user exit
User Exits IWO10023
Description Service order: Change header data for advance shipment document
User Exits IWO10024
Description Service order: Changes to items for advance shipment
User Exits IWO10025
Description Finding responsible cost centre
User Exits IWO10026
Description User check on setting status 'Do not perform'
User Exits IWO10027
Description User exit: Generate user-defined settlement rule
User Exits IWO10029
Description Inclusion of bill of material in PM/SM order
User Exits IWO10030
Description Predefining the fields for the profitability segment
User Exits IWO10031
Description Hide personnel number in PM/SM order
User Exits IWO10033
Description Customer-Specific Authorization Check PM/CS Order
User Exits IWO10034
Description Operation status based on the status of capacity requirements
User Exits IWO20001
Description User exit to pass routing/task list to order
User Exits IWOC0003
Description PM/SM authorization check of ref. object and planner group
User Exits M06B0002
Description Change communication structure for purchase requisition release
User Exits MGA00003
Description Material Master (Industry and Retail): Number Display
User Exits PPCO0001
Description Application development: PP orders
User Exits PPCO0005
Description Storage location/backflushing when order is created
User Exits PPCO0023
Description Checks changes to components
regards,
Venkatesan Anandan -
User exit in ATP Check for sales Order to trigger notification
Hi All
please let me know is there any user exit after ATP check or in ATP check for sales order to trigger a notication mail.
Regards
KishoreHi,
User Exits For Availability Check are given below:-
The user exits named here are planned for projects that are to be carried out in agreement with SAP development as they may only be used in consultation with SAP.
USEREXIT_PLANT_SELECTION in program RV03VFZZ is an exception to this rule (see below).
User exits in program FV45VFZZ
USEREXIT_ADD_FIELD_TO_HEADER
USEREXIT_ADD_FIELD_TO_LINE
User exits in program FV45VFZY
USEREXIT_DELIVERY_GROUPS
USEREXIT_MVERF_INIT
USEREXIT_QUOTA_KEY_VALUE
User exits in program RV03VFZZ
USEREXIT_AVAILABILITY_IN
USEREXIT_AVAILABILITY_OUT
USEREXIT_DARA_REFRESH
USEREXIT_PLANT_SELECTION
This user exit is used to adjust the flow during plant transfer. A list of permitted plants, where this material is created, is determined and checked in the standard R/3 delivery. A dialog box appears where you can select the plants. The user exits allow you to modify the plant table so that plant selection takes place in advance for every flagged selection and a dialog box becomes unnecessary.
regards
Vivek. -
Free Goods Problem and User Exit if needed in Sales Order
Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka MitraHello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks. -
What are the user-exits which will trigger on saving Sales Order
Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
INCLUDE MV45ATZZ. " Data definitions in MV45ATOP
INCLUDE MV45AOZZ. " User-modules PBO
INCLUDE MV45AIZZ. " User-modules PAI
INCLUDE MV45AFZA. " User-forms < 3.0
INCLUDE MV45AFZB. " User-forms
INCLUDE MV45AFZC. " User-forms < 3.0D
INCLUDE MV45AFZD. " User-forms 3.0E
INCLUDE MV45AFZF. " User-forms 3.0F
include mv45afzg. " User-forms 3.1G
INCLUDE MV45AFZH. " User-forms 4.6B
INCLUDE MV45AFZZ. " User-forms
INCLUDE MV45AFZ4. " User-forms 4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max -
IW31 - User Exit / BADI for changing data in Component's Order.
Hi gurus,
I need to update the field WEMPF in the order components during the Order Creation (Tx IW31).
Is there any User Exit or Badi I can use?
Thanks in advance !!At WO10009 User Exit...we can use this FM:
CO_BC_RESBD_OF_ORDER_GET -> Get RESB internal table.
CO_BT_RESB_UPDATE -> Update RESB table.
Althought during creation (IW31) when the order numer is temporal ($$$$$$$$$$$1), this FM works great, cause it reads from memory, not from database.
Regards, -
Name of the structure needed for sales order user exit
Hi,
I am planning to write a user exit which will insert the data into my ztable the moment the new sales order is created and is saved.
I have identified FORM USEREXIT_SAVE_DOCUMENT as the necessary user exit. But the problem is that while inserting the data into the ztable I cannot insert the data from vbak as the data will be inserted into this table after the SO is saved.
Thus I need to identify a structure which is used to populate the vbak table so that it simultaneously inserts the data in the ztable as well. Can anyone help me with the name of the structure so that these fields i.e. vbeln, vkorg, vtweg, spart are inserted into my ztable?
Also need to know how to convert the net value i.e. vbak-netwr in Indian Rupees as it gets stored as Dollars ....
Thanks,
Vinod.Hi,
One of the structure being used is RV45A, there are several other str's being used as well for various calculations,
check out program SAPMV45A for the same.
& in order to convert vbak-netwr to rupees use the below statemetnt,
WRITE vbak-netwr TO zvbak-netwr CURRENCY INR.
Regards,
Raghavendra
Message was edited by:
raghavendra ay -
User exit/ badi needed for planned order create/change,collective ATP check
Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PMDear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar -
User exit for sales order-Urgent
How Developed a User Exit, which will be triggered when a Sales Order is changed manually. This user exit will check the requested delivery date and update VBKD-BSARK field.
Pls help me how to do it....
Pts will be rewarded.....Hi,
The following exits trigger during VA01 creation:
EXIT_SAPMV45A_002 and
EXIT_SAPMV45A_003
Check this include MV45AFZZ also.
Regards,
Satish -
User exit for sales order creation VA01.
Hi friends,
While creating Sales order, before saving the document, I need to check the Customer (Sold to pary?) details in KNEX table. KNEX-KUNNR KNEX-TDOCO KNEX-DHRCO. if condition fails, I need to display an error message V1525,
which should contain
1)customer(sold-to -party?KNEX-KUNNR)
2)partner function PARVW (VBPA-PARVW?)
3)country LNDEX KNEX-LNDEX
Functional spec says, 1)V45A0002
2)V45A0003
3)V45S0001
4)V50EPROP User exits can be levaraged.
1)triggers before we enter customer (sold-to-party) in VA01. so may not be used.
remaining i tried, but I am not able to get the proper PARVW, LNDEX from function module parameters / structures like VBAP/VBPA etc.
Please help me the way.
i) the above user exits can be used?if not, help me with user exit name.
ii)if yes, how to fetch PARVW , LNDEX, KUNNR...as all the primary keys must be used in the selection query.
Please help me ASAP.Hi,
Use this enhancement V45A0002.
Reward points if it helps,
Satish -
User Exit or BADI on saving of Sales order cost estimate (CK51N)
Hi,
Can any one share with me what are the User Exit or BADI that gets triggered on saving of Sales order cost estimate (CK51N).
Regards,
BijayHi
Check the link
Need Enhancement Spot or BADI for transaction ck51n
Regards
Sanil -
To populate condition in the sale order or a scenario in the USER Exit
Hi Experts,
I want to write the code in the USER EXIT to add a condition type in the Sale order when the ship-to-party address is changed in the transaction level from the address maintained in the Master data,
So can anyone let me know is there any function module or how will i populate condition type.
I found that the internal table XKOMV contains all the condition types.
Thanks,
Premi saw the answer provided by u, i was pleased to find the answered way, so i writing back to u regarding my requirements.
my requirement.
while creating sale order, before entering the screen 4001 where we enter sold to party and material and order quantity, i need to populate these fields from my exit.
i am able to populate the sold to party field from the exist EXIT_SAPMV45A_002 and
INCLUDE ZXVVAU04 .
in the same fashion i need to populate my material filed.
how do i do it -
USER-EXIT - sales order, credit block
Moderator message: moved to correct forum. In future please use meaningful subject.
my requiremnet is, Delivery for an sales order should be created even if it is a credit block i.e even the credit check is unsuccessful the order should be deliverd when we deliver the order from salesdocument->deliver.
i need a user-exit for this to put this check.
can ne one help me.
regards,
pavan,Hi,
According to Std SAP if in case credit mgmt is activated system will check for credit limit for that customer before delivery.You will be trying to change the std scenario which is not advisable.
However,
Try user exit MV45AFZZ & in that
FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Also check other exits related to delivery & credit mgmt from
SPRO->Sales & Distr-> System Modifications->User Exits
and check out the documentation part next to each exit in that category.
Regards,
Amit -
User exit for Dlvy Block at header for sales order for Companycode & materl
Hi all,
I have a requirement. I need to apply a Delivery Block for all sales orders which fall
In a particualr company code "999" and if they have any configurable material in the item level.
When a Sales Order is generated, during the process of generation, I should
Write a loigc such that, if the sales orders fall in a particlar company code
Say for '999' and if they have a configurable material at item level,
I have to trigger an ABAP Proxy that goes and fetches a Yes/No value from an
External system. Based on this Flag value I h ave to then apply a delivery block for
The order at header level.
So I assume, I should put a logic in some user exit that gets triggered before order is saved.
And in that user exit I have to check if the Company Code of that order is '999' and if it has
Configurable product or not. If it satisfies the 2 conditions, I should, trigger this ABAP Proxy and
Based on the true/False value I have to set Delivery Block or do not set delivery block for the order
At header level.
So I think first I should figure out following things.
1) user exit ..where I should put the code to check conditions and to apply delivery block.
2) write a proxy and trigger that proxy in this user exit.
Coming to first part, which user exit should I use to set delivery block for the order
At header level. And how will I check for company code and config product?
Which variables of the SAP stnd pgm store Company Code and Config product values so that
I can check those variables for that values?
Please suggest and help me with this.
Any help will be highly appreciated.
Regards,
Sam1)go to the main program sapmv45a
include MV45AFZZ ->userexit_move_field_to_vbak
depending on ur conditions ...
keep a break-point in the form userexit_move_field_to_vbak ,and if it stops there Check for vbak-lifsk .
Write a condition to set the deliveryblock that is vbak-lifsk = 'xx'.
2)then regarding your second point ...what is the middle ware used to interact with legacy system
let me know -
User exit for sales order - schedule lines
Hi all,
I have requirement in SO, that user has not to change the scheduled lines date and quantity in va01, va02.
I could find FV45EFZ1 as the include program for this and the value of CH_SUBRC should set to > 0.
But i put break point here and the control wont come to the line. Anyone can help me to find the correct user exit ?
Thanks and regards
Jijohii
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
put a break point int he user exit and check.
hope , this will solve ur problem.
Regards,
sabarinathan.L
Maybe you are looking for
-
Error while releasing to accounting
while i am releasing a billing document to accounting folllowing error is occuring Incorrect doc.no.: 6000002. Select document number between 0090000000 and 0099999999 Message no. F5151 Diagnosis The document number you specified, "&v1", is not in th
-
Should I use Process/Mapper or Pure Java Code for XI Adapter?
Hi Friends, I'm developing a XI Adapter which including sending http request and also data transform, I prefer to implement all the functions by Java Code. But In NetWeaver XI Server, I find there are tools for creating process and mappers, they also
-
We are kind of struggling with the good old "out of memory" issue of JVM while running our app on oracle 9i j2ee container (Solaris 2.6). I do not see much discussion about this particular problem in this forum. We are playing with heap allocation, g
-
Hi there Anyone know how to increase the font size of text/e-mail messages to make them easier to read for those with less than perfect vision? When I adjust the font size in settings it only seems to adjust certain screen views, not font size in tex
-
How can I change mouse shortcuts (or mouse controlling)?
I want to control navigation with the help of mouse only, like in Opera. Where can I customize it?