PO report: Problem in printing the last page

Hi all,
In my PO report, i need to print a table specifying 'continued' in every page and a table containing total amount in the last page for one PO. By using 'start@last-page-first:body' , i am getting the solution. But i also need to print 'Terms & Conditions' ( it is one page) in the last page after one PO. This is when i tried for one PO only. If i get the solution i need to try for multiple POs.
And this terms & condition page should not count under total number of pages.
Bit Urjent, can any one please help me
Thanks in advance,
Suresh

Use following code to print terms and condition on last page of evey po
<?for-each@section:G_HEADERS?>
All header fields
<?for-each:G_LINES?>
All Line Fields
<?end for-each?> --Line End
Give Section Break <Next Page>
<?start@last-page:body?><?end body?>
PO Total Will Come here
Give Section Break <Next Page>
Terms and Condition will come here
<?end for-each?> --Header End                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

    My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document.  I need to keep printing a blank page or any other page to get my previous documents completely printed.  Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010.  I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that.  Any help would be greatly appreciated!!

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Can I print the last page of a PDF document using command line?

    Hi
    I am in a situation in which I constantly have to deal with multiple PDF documents and I need to print the last page in each of these, and ONLY the last page. The total number of pages will vary for each file, so the page number for the last page will also vary.
    I would really prefer to not do this manually, by opening up each file in the visible Adobe Reader window and then print.
    Question:
    Is there a way with Adobe Reader (maybe with the help of some other Adobe product) to print only the last page of a PDF document using some kind of command line without opening up the PDF file in the visible Adobe Reader window?
    I'm using Windows.
    Thanks in advance,
    Regards,
    Emil

    Thank you for taking the time to reply.
    I tried both ways and neither works.  It gives me a prompt box that I have to click "next" for every page but after going thru all pages, nothing is sent to the printer.
    Also, all directions I've read indicate it will print to the default printer.  If my default printer is on a network, will that cause problems....
    and...
    should I be getting a prompt box on every page?  I thought all this would happen behind the scenes and not force me to interact with every page.
    dc

  • Photosmart C6380 only prints the last page in documents

    My printer only prints the last page of multi page documents. To choose more than one page in a page interval in the print menu does not help, but it is possible to print all pages in a document if I only print one page at a time which takes forever for longer documents. I use Windows 7 64 bits and it used to work until the end of 2011. If I uninstall drivers and reinstall, it sometimes work for a short while and then the problem comes back. All my drivers are updated and I run the printer on wifi.

    Just to add some information: I do not get any error messages, blinking lamps or anything like that. I've got the same problem independent of file-format as it seems. I have tried word-files, pdf-files and to print from the web browser Explorer.

  • I don't want to print the last page of a smartform when there is no content

    I don't want to print the last page of a smartform when there is no content. Kindly help

    If the last page is printed, there are two possibilities
    -1- The MAIN WINDOW is only in this page
    -2- The page is explicitly printed from another page (new-page)
    -3- There is date but its only space or skip line.
    So in your form
    -1- Redefine the logic of your form
    -2- Check that, there are some data to be printed before calling the NEW-PAGE
    -3- Do skip or write space lines before printing an actual line and not after
    Regards

  • Print range does not print the last page in the range.

    Adobe Reader for New IPAD - The print range function does not print the last page in the range. For example, if you enter a print range of 2-18, pages 2-17 print and page 18 does not print.  Also, if you enter a print range of 9-9, page 8 prints and page 9 does not print.

    I have the Epson 4540 printer. I don't know for sure if it connects via AirPrint.  I didn't do any thing to set up Air Print.  The printer is attached directly to my network router and it shows up IPad apps.  I have not printed docs from other apps, but I will give it try and let you know.
    Christopher J. Bilcz
    [email protected]

  • LaserJet P2055dn is not printing the last page

    Hello! Our LaserJet P2055dn prints all pages in a multipage document but not the last one. When a new document is sent to the printer, it first prints the final page of the previous document, then the new document (again without the last page). If a one page document is printed, it works without a problem.
    Anyone know how to solve this?

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.
    Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

  • I select "reverse" and printer still prints from page 1; how do I print the last page first, etc

    I select "reverse" so the printer will start printing on the last page and end on the first and it still prints from page 1 leaving me to cplace all the pages in order manually.  How do I do this.  My last HP had no problems;  I have a 6100
    This question was solved.
    View Solution.

    Please try this:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, click Printing Preferences.
    Select the Advanced tab.
    Set the Pages Order as Front to Back.
    Additioanlly, verify the same setting apply for the used program as customized preferences may kept for a specific program:
    Open the File you would like to print, the click File > Print.
    Click Preferences and verify the page order set as Front to Back.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem with a text in the last page of XML Publisher Template

    Oracle Applications : 11.5.10.2
    Oracle BI Publisher Template Builder for Word 10.1.3.4 Build 129
    Hi,
    I have a problem with XML Templates, I need that a text (*Este documento no confiere origen, señala únicamente país de manufactura.) is always at the bottom of a table and it has to be in every page, the problem is in the last page where the text is showed twice.
    <?start:body?>
    LINEA EN
    FACTURA
    DESCRIPCIÓN
    CANTIDAD
    NO. DE SERIE
    PAIS DE MANUFACTURA*
    F LINE_NUMBER
    ITEM_DESCRIPTION
    CF_PRIMARY_QTY
    CF_SERIAL_NUMBER
    CF_PAIS_DE_ORIGEN
    E
    *Este documento no confiere origen, señala únicamente país de manufactura.<?end body?>
    *Este documento no confiere origen, señala únicamente país de manufactura.
    Is there a way in order not to print the text twice in the last page?.
    Regards,
    Sergio.

    Whatever the problem, it's likely due to how those paragraphs
    were formatted in Word. The RH conversion usually only reflects
    what was done there.
    Are you comfortable inspecting the underlying HTML code (the
    RH TrueCode tab)? I think you'd find some type of SPAN tag or STYLE
    attribute that is determining an absolute paragraph width.
    Otherwise, you could try this experiment:
    1. Strip the base Word doc to a moderate size, but which
    includes at least one of these non-wrapping paragraphs.
    2. Select All and press Ctrl+spacebar (this removes all
    formatting from the selected text).
    3. Import that Word doc to RH and see how it looks now.
    Good luck,
    Leon

  • Can i get summary column value of one group appears at the last page once

    Hi,
    I am having one group G_Item.I need the summary column(CS_Total_quantity->source as :cp_quantity) value as Total quantity value of the report andprint it on the last page.How can i get that value?Please advise me.Urgent......Waiting for reply.
    Thank You

    try this...
    put a summery column outside the quey.
    & take sum of "CS_Total_quantity".
    set its reset at property to "report". & print object on "last page".
    hope this 'll work for u.
    Capri...

  • How can I print a label on the last page of the report in the margin

    I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
    1. Create a dummy query, like
    select 1 dummy
    from dual
    2. Create a package spec:
    PACKAGE pkg_globals IS
    totalPages number(3);
    END;
    2. Create a repeating frame and field for this dummy at the end of the report layout.
    3. Create a format trigger for this frame:
    function R_1FormatTrigger return boolean is
    begin
    SRW.GET_PAGE_NUM(pkg_globals.totalPages);
    return (FALSE);
    end;
    4. Create a format trigger for your margin field:
    function F_1FormatTrigger return boolean is
    pagenum number;
    begin
    srw.get_page_num(pagenum);
    if pagenum = pkg_globals.totalPages then
    return (TRUE);
    else
    return (false);
    end if;
    end;

    user8655468 wrote:
    I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
    set the frame print object on: Last page
    Hope this works..

  • How to print a label in the last page of the report

    Hi, I have a report af bottom page I trid to put a label, the label is in the margin, but when I change the print condition send me a error, illegal print condition, how can I print this label only in the last page at the botton of the page
    Thanks

    Herbe,
    You can do this using format trigger
    Please see the building reports manual / Tutorial for details
    at http://otn.oracle.com/docs/products/reports/content.html
    Thanks
    The Oracle Reports team

  • How to print based on the logic that it is the last page of the report

    HI
    I want to print something on the last page.For example,I have to print a image(signature) file on the last page.How can I have the logic that it is the last page or any counter or variable to find that it is the last page of the report??
    Thanks in advance.

    Is there an example of this posted somewhere that actually works?
    I have used this exact syntax in everyway, every location possible and it either locks my MSWORD window on preview or throws a Java error.
    I am using the most current BIP template builder v10.1.3.2.1
    Thanks,
    Scott
    Sample files below:
    <?start:body?><?for-each:G_TEST?>
    <?TEST1?> <?TEST2?>
    <?TEST3?>
    THIS SHOULD PRINT ON ALL PAGES
    <?start@last-page:body?> PRINT ONLY ON THE LAST PAGE<?end body?>
    <?end for-each?><?end body?>
    <?xml version="1.0" encoding="WINDOWS-1252"?>
    <TEST>
    <LIST_G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    <G_TEST>
    <TEST1>TEST Data Line Number One</TEST1>
    <TEST2>Test Data Line 2</TEST2>
    <TEST3>33 Test Data Line 3</TEST3>
    </G_TEST>
    </LIST_G_TEST>
    </TEST>

  • How to print text or field (inside a rep fram)on the last page in report 6i

    Hi Everyone,
    I want to print the text on the last page.
    my text is inside a repetating frame.
    as i want to display page no in the filed
    and if it is a last page, display page number appended with Last
    so it will look like
    for 3 pages
    on the first page
    1
    on second page
    2
    and on last page it should display
    3 Last

    You cannot know if you are on the last page or not. See this similar thread: Get value of total pages variable
    Why not put the page number in the margin like this:
    Page 1 of 3
    Page 2 of 3
    Page 3 of 3
    You do that by creating a text field in the margin. Enter this text:
    Page &<PhysicalPageNumber> of &<TotalPhysicalPages>

  • Formatting - How to print a frame on the bottom of  the last page ?

    I have a summary frame for my report. I want to print the summary information at the bottom of the last page of the report. Currently depending on the data, the summary frame prints anywhere on the last page. How do I make sure it prints exactly at the bottom of the last page.
    Thanks in advance.

    Hello,
    I know this is an old post, but I have the same problem. I am unable to access the examples for Note.252881.1 (corrupted file). May I impose on you to send me examples via e-mail? If this is not possible can you point me in a direction where there is "good" documentation on frame manipulations? What I've found on metalink, otn, internet, etc. haven't been too forthcoming.
    Thank you.

Maybe you are looking for

  • How do I share my P1102w printer between a Windows 7 (32-Bit) and a Windows XP (32-Bit) computer

    I added a Windows 7 (32-bit) computer to my home network and installed an x86 printer driver through HP's website. The printer works fine from my Windows 7 computer, but now I am denied access to this printer from my Windows XP (32-bit) computer. Any

  • Help: Itouch not responding

    One of my friends 'borrowed' my IPod Touch. He said he tried to update something on it from his PC and it came unplugged in the middle of it. I have no clue what he was doing or what he was trying to install, and I dont think he knows either. ****, I

  • SMS for FaceTime - Domestic to Domestic iPhone in International Country

    I have read numerous threads that indicate that an SMS is sent when communicating via FaceTime from a US number to an International Number, for both audio only and video sessions to activate the P2P session.  People are surprised when they get billed

  • New to SAP BW

    Hello, I am new to SAW BW and would like to read and learn more. Could any one please provide any documentation for the same! It would be greatly helpful Regards, Sandeep Bhosale

  • Sharp text for the web

    I like to put some (small) text on a simple image to use it on the web, but the text looks blurry. I've tried all the anti-aliasing options, but none of them looks sharp. Pixelfonts do not seem to look any better. Is there any way to make small text