Poor Video performance when using ver 9.0.2 of Jdeveloper

I am using the 9.0.2 version of JDeveloper under Linux Suse 8.0. Does anyone know why when I use this product ubder this operating system the screens either do not refresh quickley or completely? I am using a 16MB video card.

I tried this test:
drop table foo;
create table foo (numeric number, text varchar2(2000));
begin
  for i in 1 .. 100000 loop
    insert into foo values (i, 'the cat sat on the mat');
  end loop;
end;
create index fooindex on foo(text) indextype is ctxsys.context
filter by numeric
EXEC dbms_workload_repository.create_snapshot;
begin
  for i in 1 .. 100000 loop
    delete from foo where numeric = i;
  end loop;
end;
commit;
EXEC dbms_workload_repository.create_snapshot;
@?/rdbms/admin/awrrpt.sqlIn the AWR report, I can see 100,000 inserts into CTXSYS.DRV$DELETE2 and 100,000 deletes from CTXSYS.DRV$SDATA_UPDATE2. On my desktop PC these take 4.06 seconds and 2.85 seconds of CPU time respectively, compared to 5.43 seconds for the delete from the $K table. Elapsed times are almost identical to CPU times.
That doesn't seem unreasonable to me - 70 microseconds per row updated. I added "alter system flush shared pool" before starting the delete but it made very little difference. If your figures are much worse than this then perhaps we should look further into it.

Similar Messages

  • Poor query performance when using date range

    Hello,
    We have the following ABAP code:
    select sptag werks vkorg vtweg spart kunnr matnr periv volum_01 voleh
          into table tab_aux
          from s911
          where vkorg in c_vkorg
            and werks in c_werks
            and sptag in c_sptag
            and matnr in c_matnr
    that is translated to the following Oracle query:
    SELECT
    "SPTAG" , "WERKS" , "VKORG" , "VTWEG" , "SPART" , "KUNNR" , "MATNR" , "PERIV" , "VOLUM_01" ,"VOLEH" FROM SAPR3."S911" WHERE "MANDT" = '003' AND "VKORG" = 'D004' AND "SPTAG" BETWEEN 20101201 AND 20101231 AND "MATNR" BETWEEN 000000000100000000 AND 000000000999999999;
    Because the field SPTAG is not enclosed by apostropher, the oracle query has a very bad performance. Below the execution plans and its costs, with and without the apostrophes. Please help me understanding why I am getting this behaviour.
    ##WITH APOSTROPHES
    SQL> EXPLAIN PLAN FOR
      2  SELECT
      3  "SPTAG" , "WERKS" , "VKORG" , "VTWEG" , "SPART" , "KUNNR" , "MATNR" , "PERIV" , "VOLUM_01" ,"VOLEH" FROM SAPR3."S911" WHERE "MANDT" = '003' AND "VKORG" = 'D004' AND "SPTAG" BETWEEN '20101201' AND '20101231' AND "MATNR" BETWEEN '000000000100000000' AND '000000000999999999';
    Explained.
    SQL> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
    PLAN_TABLE_OUTPUT
    Id
    Operation
    Name
    Rows
    Bytes
    Cost (%CPU)
    0
    SELECT STATEMENT
    932
    62444
    150   (1)
    1
    TABLE ACCESS BY INDEX ROWID
    S911
    932
    62444
    149   (0)
    2
    INDEX RANGE SCAN
    S911~VAC
    55M
    5   (0)
    Predicate Information (identified by operation id):
    PLAN_TABLE_OUTPUT
       1 - filter("VKORG"='D004' AND "SPTAG">='20101201' AND
                  "SPTAG"<='20101231')
       2 - access("MANDT"='003' AND "MATNR">='000000000100000000' AND
                  "MATNR"<='000000000999999999')
    ##WITHOUT APOSTROPHES
    SQL> EXPLAIN PLAN FOR
      2  SELECT
      3  "SPTAG" , "WERKS" , "VKORG" , "VTWEG" , "SPART" , "KUNNR" , "MATNR" , "PERIV" , "VOLUM_01" ,"VOLEH" FROM SAPR3."S911" WHERE "MANDT" = '003' AND "VKORG" = 'D004' AND "SPTAG" BETWEEN 20101201 AND 20101231 AND "MATNR" BETWEEN '000000000100000000' AND '000000000999999999';
    SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
    Explained.
    SQL>
    PLAN_TABLE_OUTPUT
    Id
    Operation
    Name
    Rows
    Bytes
    Cost (%CPU)
    0
    SELECT STATEMENT
    2334
    152K
    150   (1)
    1
    TABLE ACCESS BY INDEX ROWID
    S911
    2334
    152K
    149   (0)
    2
    INDEX RANGE SCAN
    S911~VAC
    55M
    5   (0)
    Predicate Information (identified by operation id):
    PLAN_TABLE_OUTPUT
       1 - filter("VKORG"='D004' AND TO_NUMBER("SPTAG")>=20101201 AND
                  TO_NUMBER("SPTAG")<=20101231)
       2 - access("MANDT"='003' AND "MATNR">='000000000100000000' AND
                  "MATNR"<='000000000999999999')
    Best Regards,
    Daniel G.

    Volker,
    Answering your question, regarding the explain from ST05. As a quick work around I created an index (S911~Z9), but still I'd like to solve this issue without this extra index, as primary index would work ok, as long as date was correctly sent to oracle as string and not as number.
    SELECT                                                                         
      "SPTAG" , "WERKS" , "VKORG" , "VTWEG" , "SPART" , "KUNNR" , "MATNR" ,        
      "PERIV" , "VOLUM_01" , "VOLEH"                                               
    FROM                                                                           
      "S911"                                                                       
    WHERE                                                                          
      "MANDT" = :A0 AND "VKORG" = :A1 AND "SPTAG" BETWEEN :A2 AND :A3 AND "MATNR"  
      BETWEEN :A4 AND :A5                                                          
    A0(CH,3)  = 003              
    A1(CH,4)  = D004             
    A2(NU,8)  = 20101201  (NU means number correct?)       
    A3(NU,8)  = 20101231         
    A4(CH,18) = 000000000100000000
    A5(CH,18) = 000000000999999999
    SELECT STATEMENT ( Estimated Costs = 10 , Estimated #Rows = 6 )                                                              
        5  3 FILTER                                               
             Filter Predicates                                                                               
    5  2 TABLE ACCESS BY INDEX ROWID S911                 
                 ( Estim. Costs = 10 , Estim. #Rows = 6 )         
                 Estim. CPU-Costs = 247.566 Estim. IO-Costs = 10                                                                               
    1 INDEX RANGE SCAN S911~Z9                     
                     ( Estim. Costs = 7 , Estim. #Rows = 20 )     
                     Search Columns: 4                            
                     Estim. CPU-Costs = 223.202 Estim. IO-Costs = 7
                     Access Predicates Filter Predicates          
    The table originally includes the following indexes:
    ###S911~0
    MANDT
    SSOUR
    VRSIO
    SPMON
    SPTAG
    SPWOC
    SPBUP
    VKORG
    VTWEG
    SPART
    VKBUR
    VKGRP
    KONDA
    KUNNR
    WERKS
    MATNR
    ###S911~VAC
    MANDT
    MATNR
    Number of entries: 61.303.517
    DISTINCT VKORG: 65
    DISTINCT SPTAG: 3107
    DISTINCT MATNR: 2939

  • Poor performance when using kde desktop effect

    Hey,
    I'm having trouble when using kde effet (system settings -> desktop -> desktop effects).
    I have a dual core E5200 3 ghz, 2 GB memory pc8500 and an HD4850 using fglrx driver, but I got incredible bad performance when using desktop effect and watching video, I can barely watch a 800x600 video in full screen mode without having bad performance, X getting up to 40% cpu usage.
    Its really like my graphic card isnt handling the rendering stuff but 3D acceleration is working, I can play 3D game without problem so far (as long as the deskstop effect arent enabled cause the cpu have like a hard time handling both for recent game)
    So I guess its some trouble with 2D acceleration or something like that, I read that some people had such issue, but I didnt figure a way to fix it.
    Here is my xorg.conf, in case something is wrong with it :
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "extmod"
    Load "dbe"
    Load "record"
    Load "glx"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    VendorName "ATI Technologies Inc"
    BoardName "RV770 [Radeon HD 4850]"
    BusID "PCI:8:0:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:8:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Thank you for any help.

    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    VendorName "ATI Technologies Inc"
    BoardName "RV770 [Radeon HD 4850]"
    BusID "PCI:8:0:0"
    EndSection
    and
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    I see no reason for those to be there.
    make a backup of your xorg.conf and remove / comment those lines.

  • Poor sound quality when using air play

    How do I fix poor sound quality when using air play with my Denon receiver?

    I am not too sure if this is affected by BT software stack or RF design...
    iPhone 3G with FW 2.x provides Cisco VPN as well as Email support for corporate usage. However, it's weird that business man wouldn't want to use BT headset and talk to people... We are not asking about new feature support, like A2DP, but reliable, stable BT connection ONLY!!
    I've read that lots folks spent a lot of money on purchasing many different BT headsets and tried to get it work with iPhone 3G. I myself tried: Plantronics 510/815/855, Sony HBH-DS970/980, Nokia BH-903. None of them can work fine with my iPhone 3G ever! And iPhone 3G even cause BH-903 and DS-980 hang up after pairing or finishing call!!
    That's why I don't believe it's just a "SPECIAL CASE". How could a product FOR BUSINESS purpose get this kind of basic function problem?
    I hope we will find this issue could be resolved completely with new F/W, like Safari crash problem before. Other than this BT IOT problem, iPhone 3G is really the phone/companion could provide complete solution fulfill my personal and business needs.

  • Is anyone able to explain really poor performance when using 'If Exists'?

    Hello all.  We've recently had a performance spike when using the 'if exists' construct, which is a construct that we use through much of our code.  The problem is, it appears illogical since if can be removed via a tiny modification that does
    not change the core code.
    I can demonstrate  
    This is the (simplified) format of the base original code.  It's purpose is to identify when a column value has changed comparing to a main table and a complex view
    select 1 from MainTable m
    inner join ComplexView v on m.col2 = v.col2
    where m.col3 <> v.col3
    This is doing a table scan, however the table only has 17000 rows while the view only has 7000 rows.  The sql executes in approximately 3 seconds.
    However if we add the 'If Exists' construct around the original query, like such:
    if exists (
    select 1 from MainTable m
    inner join ComplexView v on m.col2 = v.col2
    where m.col3 <> v.col3
    print 1
    The sql now takes over 2 minutes to run.  Note that the core sql is unchanged.  All I have done is wrap it with 'If Exists'
    I can't fathom why the if exists construct is taking so much longer, especially since the code code is unchanged, however more importantly I would like to understand why since we commonly use this type of syntax.
    Any advice would be greatly appreciated

    OK, that's interesting.  Adding the top 1 clause greatly affects the performance (in a bad way).
    The original query (as below) still runs in a few seconds.
    select 1 from MainTable m
    inner join ComplexView v on m.col2 = v.col2
    where m.col3 <> v.col3
    The 'Top 1' query (as below) takes almost 2 minutes however.  It's exactly the same query, but with 'top 1' added to it.
    select top 1 1 from MainTable m
    inner join ComplexView v on m.col2 = v.col2
    where m.col3 <> v.col3
    I suspect that the top 1 is performing a very similar operation to the exists, in that it is 'supposed' to exit as soon as it finds a single row that satisfies it's results.
    It's still not really any closer to making me understand what is causing the issue however.

  • Poor Performance when using Question Pooling

    I'm wondering if anyone else out there is experiencing
    Captivate running very slow when using question pooling. We have
    about 195 questions with some using screenshots in jpeg format.
    By viewing the Windows Task Manager, CP is using anywhere
    between 130 to 160 K worth of memory. What is going on here? It's
    hammering the system pretty hard. It takes a large effort just to
    reposition the screenshot or even move a distractor.
    I'm running this on a 3.20GHz machine with 3GB of RAM.
    Any Captivate Gurus out there care to tackle this one?
    Help.

    MtnBiker1966,
    I have noticed the same problem. I only have 60 slides with
    43 questions and the Question Pool appears to be a big drain on
    performance. Changing the buttons from Continue to Go to next slide
    helped a little, but performance still drags compared to not using
    a question pool. I even tried reducing the number of question
    pools, but that did not affect the performance any. The search
    continues.
    Darin

  • Help with Video Performance Issues using Flash

    Asking on behalf of a customer who has been unable to get any answers so far - are you able to help?
    Background:
    We have a port of our Game Development Kit which allows us to recompile all our games using Crossbridge (http://adobe-flash.github.io/crossbridge/) into SWF without any code modifications.
    Overview:
    Our framework is using OpenGL for rendering and we have successfully ported it along with the audio and video to run in Flash.
    We are experiencing performance issues using Video. We cannot use image sequence as some of the video animations are too long and would increase the download to an unacceptable size.  Assets vary between 256x256 - 1024x1024 videos.

    Here's the rest of the story.  Let me know if you can see any resolution, and I will connect him to the forums.  Thank you.
    Current Video Solution:
    We create an instance of NetConnection, NetStream, and Video according to most samples out there, and invoke draw to rasterize the Video DisplayObject into a BitmapData instance.
    The BitmapData instance has a fixed color component layout which is not compatible with Stage3D texture and is therefore has to be reformatted before uploaded to Stage3D Texture (See Code Listing below).
    Our Problems:
    Performance issues with RGBA conversion (either using copyChannel or manually reformatting is not fast enough) natively in as3; this required for stage3d texture.Copying each channel individual using bitmapdata.Copychannel seems faster, but not significantly faster.
    Cannot detect when video frame has been updated, therefore we may copy pixels that are not needed in enterframe (processpixel).
    Looping video, our current solution uses the NET_STATUS event Buffer empty; Is there a better way to loop videos than checking buffer and seeking to 0.
    Stepping video, loading FLV or MP4 side by side assets from HTTP or embedded does not support stepping? Is there another way?
    ActionScript Code Listing:
    video_nc = new NetConnection();
    video_nc.addEventListener(NetStatusEvent.NET_STATUS , onConnect);
    video_nc.addEventListener(AsyncErrorEvent.ASYNC_ERROR , trace);
    video_nc.connect(null);
    // OnConnect Event:
    this.ns = new NetStream(e.target as NetConnection);
    eventclient = new Object();
    eventclient.onMetaData = onMetaData;
    this.ns.client = eventclient;
    ns.play(flvfile);
    ns.pause();
    //onMetaData event:
    this.width = infoObject.width;
    this.height = infoObject.height;
    this.textureWidth = NextPowerOfTwo(this.width);
    this.textureHeight = NextPowerOfTwo(this.height);
    cliprect = new Rectangle(0, 0, this.width ,this.height);
    cliprect.x = 0;
    cliprect.y = 0;
    cliprect.width = this.textureWidth;
    cliprect.height = this.textureHeight;
    totalFrames = infoObject.duration * infoObject.fps;
    this.hasAlpha = true;
    if(infoObject.videocodecid == 5)
    this.hasAlpha = true;
    this.bitmapData = new BitmapData(this.textureWidth, this.textureHeight, hasAlpha, 0xff000000);
    this.video = new Video(this.width, this.height);
    this.video.attachNetStream(ns);
    this.video.addEventListener(Event.ENTER_FRAME, processPixels);
    // processPixel method:
    BitmapData.draw(video);
    GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
    var fmt:uint = GLAPI.GL_ARGB;
    // converting pixels using copychannel or loop through pixels
    GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
    GLAPI.instance.glTexImage2D(GLAPI.GL_TEXTURE_2D, 0, fmt, this.textureWidth, this.textureHeight, 0,fmt, GLAPI.GL_UNSIGNED_BYTE, 0, convBitmapData.getPixels(cliprect));

  • Poor Video quality when importing from SONY DCR-SR100

    I am brand new to Mac and iMovie and FCE. One of the reasons I switched to Mac was frustration over poor video output from Windows based video editing programs. When importing video from the SR100 into iMovie and then iDVD, the DVD quality is noticeably poorer than when the camera is connected directly to the Plasma TV. I have been reading these forums and loaded MPEG Streamclip and purchased the Quicktime MPEG2 Download, but I still can't get the video output to look as good as the camera. I obviously have some learning to do, but is there any hope of achieving equal quality output from a DVD as straight from the camera? Is there a good source of information/textbook on this topic? The biggest improvement comes from using the "de-interlace" option in MPEG Streamclip, but the overall quality of the video appears washed out and somewhat blotchy compared to the direct camera footage.

    Welcome to the macworld! What imovie does incredibly well is make it easy to create fun and interesting movies. I have used both for several years and only recently with some packages such as adobe premiere elements has the windows world kept up with the mac with respect to ease of use! And even know the packages are still not as easy as imovie. Anyway, with respect to your post and getting the video quality to the best possible output quality using DV material, you are on the right path. The best workflow is to use streamclip and de-interlace prior to editing in imovie. I am not sure if you are doing that yet with your workflow. Yes, its an extra step, but it is well worth it to avoid imovie dropping a field upon export. You can play around with the adjustments to increase contrast, color and et al on the adjustment button. Another option is shooting progressive.
    To set expectations, it is second generation footage the minute its imported. However, you should be still getting very good results. FCE gets footage closer to the original footage since it is a true DV editor and uses both fields, but imovie is still preferred by me because of how easy it is to skim, tag and find the material you want then easily do transitions and ken burns for photo's. Fantastic. The way i look at it....watching footage straight from the camera is the worst quality you can get -- It's like listening to your spouse talk and talk and talk and never get to the point until you forget what that point was....editing gets the footage straight to the point....thats quality!
    Sheryl
    Message was edited by: Sheryl Kingstone

  • Satellite P100 PSPAD: Unable to update BIOS 3.8 and poor video performance

    Hello,
    I have absolute shoddy video performance on my machine as well as the fan on/off issues.
    To add to my frustrations the WinPhlash programme included in BIOS version 3.8 dumps out when trying to flash giving a PHLASHNT.SYS unable to load message with various error codes associated with it (codes 5 and 147 depending on if I run the exe as it is extracted from the ZIP, or run the extracted files independantly).
    I have checked all permissionings on the folder and I definately have full control - but still a generic "check your accounts, if you have no permissions please log in again!" message is displayed.
    any help with my BIOS issue would be apreciated.
    [Edited by: admin on 06-Jul-2007 11:10]

    Hi,
    I have had the same error message on P100 PSPADE and furthermore the laptop was no longer under control, neither by keyboard or by menu impossible to switch off. I have had to unplug and to remove the battery. Then impossible to switch on.
    According to the local ASP the motherboard is KO (??) and the safest way to upgrade the bios was to boot from an USB floppy in DOS mode?
    Sounds strange but be careful.
    Regards

  • Has anyone had issues with poor image quality when using lightroom to process raw images from Canon 7dmk2

    Hi everyone..
    ..I have been having image quality issues when using Lightroom to process raw files from a 7d mk2... They are all soft with poor clarity.....tonight in despair I tried processing them  using  canon's software and they are totally different..."much better"
    anyone else had similar problems....Andy

    I have a 7D2 and have not had what I interpret as poor image quality that has anything to do with the camera.
    Can you post a screenshot of what you’re seeing and what specifically you don’t like?  Maybe there is something you can do differently or at least there may be an explanation for what you’re seeing.
    And if you have a raw image that you wouldn’t mind sharing in a public forum, upload to http://www.dropbox.com/ then post a public share link to it in a reply, here.
    In other words post a screenshot of what you see in LR, another of what you see using DPP, and a link to the raw file you’re processing.

  • Flash video artifacts when using discrete graphics

    So I have a 2011 MacBook Pro with Intel and ATI graphics. When watching flash video (YouTube), I have weird artifacting going on when using just discrete graphics. While using Intel graphics, the video usually plays fine, just a little choppy. I am using gfxCardStatus to switch between them. Is this a flash bug or something else? I've added an image to show what I'm talking about.

    Darrell110 posted in macromedia.dreamweaver
    > problem is I do not want to use another player. I add a
    lot of
    > video for clients and I love how easy it is to do that
    with
    > Dreamweaver.
    I don't see any evidence that you used Dreamweaver to insert
    the
    player. Normally, when you insert Flash with Dreamweaver, it
    inserts
    code I can readily identify. Did you use GoLive?
    The pages you show are consipicuously missing the
    <object> code and
    the JavaScript that DW uses.
    And I don't see any differences in the players. The pages
    both link to
    files named flvplayer.swf (in different folders) with the
    same look and
    the same file size. I am late in this thread, so maybe I
    missed the
    boat.
    Anyway, I don't know if this would make a difference with
    that player,
    but one page uses a relative link to the .flv, while the
    other page
    uses an absolute link, including
    http://. See if changing that one to a
    relative link helps.
    I only watched about a minute from both pages and, although
    872 Kpbs
    for the video track is VERY high, I did not see any glitches.
    (Did you mean to use two slashes in the second link?)
    > Here are samples using the same video file, only
    different
    > PLAYERS:
    http://bobbywarns.com/viewvideo.html
    >
    http://bobbywarns.com//video/viewvideo.html
    Mark A. Boyd
    Keep-On-Learnin' :)

  • U/tube videos open when using Safari but will not open when using Firefox.

    u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

    Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
    Try the following:
    Repair permissions & restart.
    Make sure you have the latest versions of Adobe Flash Player Software
    QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
    Deactivate the "Flash Media" option.

  • Why wont Youtube videos load when using Firefox 3.6.3?

    I've been having issues with youtube when using firefox, the video doesnt load or show up for that matter its just a black screen where the video should be and on the bottom left hand corner of Mozzilla it says "done" I've tried everything, I updated java and flash but nothing seems to work. What can I do? I know I can use other web browsers but I really want to fix this
    == URL of affected sites ==
    www.youtube.com

    There are a few reasons why youtube might be broken:
    * An extension may be causing the problem: try the steps at [[Troubleshooting extensions and themes]]
    * ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
    * Firewall software is blocking some resources on the page: see [[Firewalls]]
    If none of this works, let me know if Flash video from other sites work. Here are a few you can try:
    *[http://www.dailymotion.com/video/x9hvlb_3d-toy-story-3-2010-teaser-trailer_shortfilms]
    *[http://www.hulu.com]
    *[http://www.cuatro.com/el-hormiguero/videos]

  • Acer S7 screen flickers during videos and when using Microsoft Office Screen is white

    Had my Acer S7-392 for about 9 months and it has a problem that i've not been able to resolve. - When on some websites or watching video's (embedded into the website like on Facebook) the picture flickers and is unwatchable. If you scroll so that a little of the video is offscreen the problem stops.- Also when using microsoft office programs the screen just goes white and I can't do anything without closing the programs via task manager. I've made sure I have all the right drivers. Intel sends me to the Acer website for the drivers and I have the most up to date of those. I have phoned microsoft and they say that it is not them and even when remote accessing the machine they cannot see a problem. I'm sure its a graphics problem as other than these two irritating issues the machine works fine. Many thanks in advance for anyones help.

    Hi, I don't own an external monitor. I can take the laptop to work and use one there. If I do that and the same problem happens what does that mean? If the problem is not repeated on the monitor what does that also mean? If I can't use a monitor what else can I do? Thanks. Tom

  • Optimizing EtherCAT Performance when using Scan Engine

    Hello everyone,
    This week I have been researching and learning about the limitations of the LabVIEW's Scan Engine. Our system is an EtherCAT (cRIO 9074) with two slaves (NI 9144). We have four 9235s, two 9237s and two 9239 modules per chassis. That means we have a total of 144 channels. I have read that a conservative estimation for each scan is 10 usec. This means with our set up, assuming we only scan it would take 1.44 msec which would yield roughly a rate of 694 Hz. I know that when using a shared variable, the biggest bottle neck is transmitting the data. For instance, if you scan at 100 Hz, it'll be difficult to transmit that quickly, so it's best to send packets of scans (which you can see in my code).
    With all of that said, I'm having difficulties scanning any faster than 125 Hz without railing out my CPU. I can record at 125 Hz at 96% of the CPU usage but if I go down to 100 Hz, I'm at 80%. I noticed that the biggest factor of performance comes when I change my top loop's, the scan loop, period. Scanning every period is much much more demanding than every other. I have also adjusted the scan period on the EtherCAT's preferences and I have the same performance issues. I have also tried varying the transmission frequency(bottom loop), and this doesn't affect the performance at all.
    Basically, I have a few questions:
    1. What frequency can I reasonably expect to obtain from the EtherCAT system using the Scan Engine with 144 channels?
    2. What percent of the CPU should be used when running a program (just because it can do 100%, I know you shouldn't go for the max. Is 80% appropriate? Is 90% too high?)
    3.Could you look through my code and see if I have any huge issues? Does my transmission loop need to be a timed structure? I know that it's not as important to transmit as it is to scan, so if the queue doesn't get sent, it's not a big deal. This is my first time dealing with a real time system, so I wouldn't be surprised if that was the case.
    I have looked through almost every guide I could find on using the scan engine and programming the cRIO (that's how I learned the importance of synchronizing the timing to the scan engine and other useful facts) and haven't really found a definitive answer. I would appreciate any help on this subject.
    P.S. I attached my scan/transmit loop, the host program and the VI where I get all of the shared variables (I use the same one three times to prevent 144 shared variables from being on the screen at the same time).
    Thanks,
    Seth
    Attachments:
    target - multi rate - variables - fileIO.vi ‏61 KB
    Get Strain Values.vi ‏24 KB
    Chasis 1 (Master).vi ‏85 KB

    Hi,
    It looks like you are using a 9074 chassis and two 9144 chassis, all three full with Modules and you are trying to read all the IO channels in one scan?
    First of all, if you set your scan engine speed for the controller (9074), then you have to synchronize your Timed Loop to the Scan Engine and not to use a different timebase as you do in your scan VI.
    Second the best performance can be achieved with I/O variables, not shared variables and you should make sure to  not allocate memory in your timed Loop.  memory will be allocated if an input of a variable is not connected, like the error cluster for example or if you create Arrays from scratch as you do in your scan VI.
    If you resolve all these Issues you can time the code inside your Loop to see how long it really takes and adjust your scan time accordingly.  The 9074 does not have that much power so you should not expect us timing. 500 Hz is probably a good estimate for the max. Performance for 144 channels and depending on how much time the additional microstrain calculation takes.
    The ECAT driver brings examples which show how to program these kinds of Apps. Another way of avoiding the variables would be the programmatic approach using the variable API.
    DirkW

Maybe you are looking for

  • Challenge: How to create an BMP Java Bean from a DBF Database??

    Hello guys.... This is my challenge and looking for some aim: I was asked to create an application that must read from an existing DBF Database of products (That is already used by an administrative system) an build a Price List in Real Time. The pro

  • Category in synchronous send in BPM

    Hi all,            I am doing a BPM and in that I need to make asynchronous send.I have used a synchronous Abstract interface for that but In container I cant understand what i need to specify in category as I am not finding the synchronous msg in ab

  • How do i change my "welcome" name

    How do I change my "welcome" name

  • X takes away a lot of cpu time!

    Today I installed Arch on my Fujitsu Siemens Amilo Pa2510 and i noticed that the cpu fan is allways on. The reason seems to be the X-Server which takes away almost 50%. Its a Athlon 64 X2 System with an Ati Mobile X1200 This is my Xorg.conf: # Auto-g

  • More then 1 class

    Hello all, i'm having a problem running another class, one class compills all fine but the main class does not compill keeps coming with errors like this: cannot resolve symobol symbol : class Random1 Location class TestRandom Random r = New Random1(