Populate error message if not selected any of the check box in select scren

hi,
I am working on a bdc program to upload selected fields, I have populated my 10 fields on selection screen. Given one check box for test run. If I have selected test run check box and not selected any of the field check boxes, it has to populate one error message message 'select atleast one field checkbox' and should stay on selection screen itself. I used 'S' and used message leave list-processing, but i need error message 'E' and populate message select on check box and do not go for process.
thanks & regards,
Sekhar.

Hi,
as you don't want to process further and also want to stay on the same screen,then use this at
AT SELECTION-SCREEN.
if p_test_run = 'X' AND.......   " conditions for which msg is to be raised
    MESSAGE Ixxx(xyz).    " *use msg type 'I' Information message*
    LEAVE LIST-PROCESSING.
    LEAVE SCREEN.
endif
regards,
neha
Edited by: Neha Shukla on Mar 6, 2009 11:22 AM

Similar Messages

SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

Hi Experts,
I'm needing help to solve a problem with an SFTP Receiver interface.
Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
Message
could not be forwarded to the JCA adapter. Reason: 2: Moving
/ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
Any help will be welcome!
tks.

Hi Durga and Naveen...
I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
I changed to a directory without the intervention of the legacy application and it worked.
I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
Tks All for help!

I can't start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

When I try to start CS6 I get this error message "Could not initialize Photoshop because the preferences file was invalid (it has been deleted)." What do I do now??

Please refer:
FAQ: How do I reset my preferences?
Regards,
Ashutosh

How can i activate my ipad mini? every time the error message is not going there. and the version has expired.

how can i activate my ipad mini? every time the error message is not going there. and the version has expired.

Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google.

I cannot install the latest version of iTunes on laptop (windows xp). I receive a windows installer error message. Not having any issues installing any other software. Was having no issue syncing w iPhone. Made the mistake of uninstalling prior version.

I cannot install the latest version of iTunes on my laptop (windows xp). I receive a windows installer error. Am not having any problem installing other software or syncing w iPhone. Made the mistake today of uninstalling my older version and not cannot install new. Need new version in order to sync w new iPad.
Any help would be appreciated.

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

Unable to move message, the message could not be moved to the mail box trash

I have an iPhone 4 with the error message 'unable to move message, the message could not be moved to the mailbox trash' with 4 emails, I managed to remove 2 of the messages by marking them as read however with the other 2 i tried this and it just crashed the Mail app any help would be appreciated.

Did you have Hotmail set-up with Android prior? I did, and if you did too, you have the same problem, and this is how to solve it.
From your desktop computer, the Hotmail (or Outlook) website uses the folder "Deleted" for your deleted messages as default. On your iPhone, the deleted folder's name by default is "Trash".
When I had my Hotmail with Android, it created a folder Trash for deleted messages, and it's creation was amongst all my folders. So when you go back and look at Hotmail from your desktop, you will see a folder Trash, in addition to the default Deleted. My Trash folder had all the emails I deleted from my Android.
That said, with the manual folder Trash that was created, when trying to set-up Hotmail now on iPhone, because I already had a folder Trash, it conflicted with the default "Trash" folder it wanted to created, so it didn't create it, being the reason why you can't delete emails, because it doesn't have the defaulted "Trash" folder to go to.
The solution is to delete the folder "Trash" from your desktop, uninstall Hotmail from your iPhone, and re-install, and it worked, the defaulted "Trash" was then created, alongside the "Sent" and "Junk".

Error message - did not match any documents

I am undertaking an IM training program that recommends the use of firefox as the browser. However when I try to login my site using Firefox I receive the following message
Your search - http://acnehometreatmentsandcures.com/wp-login - did not match any documents.
I am able to login using Google so is there a problem with my Firefox installation. Your assistance is appreciated

When I go to the site's home page and use the login link, there is a .php extension on the page:
http://acnehometreatmentsandcures.com/wp-login.php
Does that work for you?

Error Message - Could not be moved to the mailbox "(null)"

The archive button in macmail will not let me archive an email using one of my IMAP accounts, making me think I accidentally deleted an Archive folder during setup. I get the following error message. The message [subject] could not be moved to the mailbox "(null)". The destination mailbox does not exist.
Each of my email accounts have an archive folder, except for my work account (Tecsg) which has a circle icon instead of the Archive box icon.
Any tips on how to fix this?

So this worked for me...
I found the answer here.
Close Mail
Go to /Users/<username>/Library/Mail/V2/MailData/
Edit Accounts.plist
Make a backup of the file just in case
Find the following key-string pair under the account that you are having trouble with:
<key>ArchiveMailboxName</key>
<string></string>
Change the <string> tag value to your desired archive folder name, e.g. Archive
Save the file
Reopen Mail
The Archive folder will now apear with the rest of your archive folders in the navigation area.
You can also add an archive button to the toolbar.

Error Message: Can not generate mask for the LMB peripherals

I've added a bunch of perhipherals to my microblaze project and used the Generate Addresses button. I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl
ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why. Here is the address map it shows:Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr    dlmb
(0000000000-0x00003fff) ilmb_cntlr    ilmb
(0x81800000-0x8180ffff) xps_intc_0    mb_plb
(0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
(0x83400000-0x8340ffff) Generic_SPI    mb_plb
(0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
(0x84000000-0x8400ffff) RS232    mb_plb
(0x84400000-0x8440ffff) mdm_0    mb_plb
(0x8c000000-0x8fffffff) mpmc_0    mb_plb
(0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts? I was unable to find another instance of this error message.

Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit. 0x00800000. I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000. (Basically telling it to match addresses if all address signals above 16KB are zero). I don't know if that is the proper way to do it, but it accepted it. Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask. But the tools appear to like it.

Error message 404 when trying to download the Virtual box Image file from OTN

from the http://www.oracle.com/technetwork/community/developer-day/vbox-jdev-webcenter-410901.html page that
That it says: The following software is installed in this VirtualBox image
And that includes: Oracle Universal Content Management 11g R1 (11.1.1.4.0)
Clicking on the REAVDD-HOL-WC-disk1.vmdk.001 link I got:
We're sorry, the page you requested was not found.
We have recorded this error (404) to help us fix the problem.
You may wish to try again using one of the tools below.
    Back to Previous Page
    Site Map
    Product Index
    Software Download Index
    To search for your page, try our Search function.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

SFTP Receiver channel error :Message could not be forwarded to the JCA adapter.

Hello Guys,
I have different SFTP Receiver channels running in production from long time. Suddenly, they have started giving the same kind of error as below:
Any suggestion where to look for the solution to this issue.
Thank you!
Regards,
Simran

Hi,
Did you try connecting to the SFTP server using filezilla? May be something might have changed on the FTP server.
You can use the xpi inspector to get additional information.

Help! Trying to enable automatic downloads on iTunes and im not able to click the check box!!

So i have the latest itunes, im trying to get iCloud to work.
When i go to store under settings in my iphone 4, automatic downloads are turned on.
When i go to itunes in my macbook, and try to enable automatic downloads, the boxes next to "music, books, apps" are unable to be checked, they appear in a light gray color.
I dont know why this is happening!
Can someone help me please?

Hi carolyn..
I dont think you quite understand my problem at hand..
Basically, automatic downloads are enabled on my iphone.
The PROBLEM is when i go to enable automatic downloads on my macbook, i see the boxes next to books apps and music but it is NOT letting my check those boxes for some reason! It is completly restricted and i am confused to why it is doing that.
Thank yoU!

Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
Ravi

Hi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi.

Log4j:ERROR Message object not configured.

while trying to use the SMTPAppender i got this message:
log4j:ERROR Message object not configured.
any idea?
thank you

It is unfortunte that this tops the Google serach
result for the subject text. It is message like this
that really pollutes all the good information that
are found in the web space. Message like this not
only perpetuates the "anti-social geek, I'm God and
you're not" stereotype, but also alienates the next
generation of aspired developers that this country is
so in need of.Did you register an account just to insult a pretty well-dedicated group of volunteers here? These people offer to help people they don't know with absolutely no benefit to themselves except to further the process of learning. Maybe there' s a warm fuzzy stemming from the fact that the person whose question was answered might have learned something.
If this is the type of asshat developer you would like to foster through the IT world, then you can try to put up with these people. People who are unwilling to communicate their problems do not deserve to have them solved. People who are simply attempting to skate by and be spoonfed through what's left of their mediocre careers can go elsewhere for help.
Thank you for your answer, and I admire that you posted here after you solved your own problem. Just leave out the cheeky, holier-than-thou diatribe next time. Go to Javaranch if you want to chat about Java and have your hand held while you bumble around.

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

Populate error message if not selected any of the check box in select scren

Similar Messages

Maybe you are looking for