Power BI analysis services connector - the remote server returned an error (403)

Hi all, does any one have any suggestions what to try to identify the configuration problem I have?
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions.
When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)."
I've tested connecting to the database from Excel on a desktop and connect fine.
I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.
The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the
connector configuration. It's also a local admin account. There is no gateway installed on the server.
Any help would be greatly appreciated, thanks, Brian
Brian Searle

Brian-
One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
whoami /upn
Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
If that doesn't work, your best bet is to go to
http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
http://artisconsulting.com/Blogs/GregGalloway

Similar Messages

BizTalk to Web Service - Error - The remote server returned an error: (403) Forbidden.

Hi Everyone,
I am connecting to an external web service from my biztalk application through a dynamic send port.
When my biztalk application is trying to send the request message to the web service through the send port, I am getting the following error :
The remote server returned an error: (403) Forbidden.
The external web service team have provided a certificate and a private key to install in my server.
I have installed the certificate by double click the .pfx file using the private key and have added the certificate in the host ProcessHostx64.
Still i am getting the same error.
Can someone help on this issue ?
Many Thanks,
Anand
S B A

The Private Key should be installed under the user running the BizTalk Server Host. Please confirm that you have done this?
If so, try to make this work in a small .NET test Application before porting it to BizTalk, so that you can confirm that you do have sufficient credentials to call the Service.
Morten la Cour

The remote server returned an error: (403) Forbidden on container.CreateIfNotExistsAsync() method

static class StorageUtils
public static CloudStorageAccount StorageAccount
get
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
I have a web project and I converted it to "MS Azure Cloud Service Project"
I make the Azure project default and run CreateAndConfigureAsync() to create the container. It works fine and creates the images container in Azure storage.
Then I make my web project default and change CloudConfigurationManager.GetSetting to ConfigurationManager.AppSettings in StorageUtils class and run the web app project. Then I get "The remote server returned an error: (403) Forbidden" error whencontainer.CreateIfNotExistsAsync()
line get executed.
What is the reason for this?
async public void CreateAndConfigureAsync()
try
CloudStorageAccount storageAccount = StorageUtils.StorageAccount;
// Create a blob client and retrieve reference to images container
CloudBlobClient blobClient = storageAccount.CreateCloudBlobClient();
CloudBlobContainer container = blobClient.GetContainerReference("images");
// Create the "images" container if it doesn't already exist.
if (await container.CreateIfNotExistsAsync())
// Enable public access on the newly created "images" container
await container.SetPermissionsAsync(
new BlobContainerPermissions
PublicAccess =
BlobContainerPublicAccessType.Blob
catch (Exception ex)
}

Hi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Return The remote server returned an error: (403) Forbidden error for some file types

hi
am using below code to get the byte array
byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
Thanks in Advance

Hi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When using the OData Source I receive error "The remote server returned an error: (403) Forbidden. (System)"

I get this error once I click the "Test Connection" button in the OData Connection manager. I am working against an O365 SharePoint List. I will add that I have this working just fine when running it from my Windows 8 workstation using Visual Studio
2013.
On my Windows 2012 R2 Server, using Visual Studio 2013 is wen I encounter the error so I know I have the connection settings correct. I am going against the same SP list using the same credentials. The only difference is when running on Server
2012 vs. Winodws 8 workstation. I don't know if there are some other security settings that need to be applied.
I will also add that I can access on premise list successfully, I am only having this issue with O365 List.
Any help would be appreciated. Thanks.
Jim

It might be due to the “Microsoft Online Services Authentication” NOT set to true.
See
http://whitepages.unlimitedviz.com/2014/03/using-the-odata-source-connector-with-sharepoint-online-authentication/
Arthur
MyBlog
Twitter

The remote server returned an error: (503) Server Unavailable in search service

Hi
I got this error message: when applying toplogy to search service
I am applying admin component : SPINDEX Server
crawl component-0 to : same index server spindex server
in sharepoint farm has
1 applicationserver
1 index server
1 wfe server
1 db server
I prepared like this try to configure search service on index server
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException: Topology provisioning failed due to an error.Object reference not set to an instance of an object. at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp() at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
in the event viewer I get this error
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adil

Hi
when i set crawl component,administration component to local computer search service working properly
but when i scale out search service application
change above components to diffrent server i get following error
Errors were encountered during the
configuration of the Search Service Application.
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException:
Topology provisioning failed due to an error.Object reference not set to an
instance of an object. at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication()
at
Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
3/23/2014
10:32:20 AM
and in event viewer
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adil

The remote server returned an error: (401) Unauthorized. + Web Service userprofileservice.asmx

Hi Community,
I need you assistance on an issue I'm facing.
The remote server returned an error: (401) Unauthorized.
The remote server returned an error: (401) Unauthorized.)
I'm connecting to a web service (userprofileservice.asmx) to auto populate email address in an Info Path form. It was working fine Friday/Monday. Open the form today and I received error:5566
It's populating in preview but when I open the form in the browser (info path web part) that's when I receive error:5566
I need your help guys please, this is doing my head in.
Cheers Matt

Not sure how you do that?
I'm using SOAP UI to test I can connect to the web service and check the envelope request
details. Before it was giving me 401 error until I granted my account permission to that asmx on the web server.
It's strange because I can connect to the web service by soap UI and see all the information.
I can connect to the web service by using the URL.
Works fine in preview mode.
Was working fine on the production environment until yesterday and now I have error 5566.
All the configuration on the web server is the same.
I'm at a brick wall.. Help

Risport Service: The remote server returned an error: (502) Bad Gateway

Hi All.
I am using the CUCM (System version: 6.1.3.2000-1) Risport function to get device information.
When trying to connect to the service (https://<CUCM_IP>:8443/realtimeservice/services/RisPort) I receive the folowing error:
The remote server returned an error: (502) Bad Gateway
When entering the same URL into the browser on the same application server I get a Security Alert, user prompt and eventually the expected screen. So the service is running, but somhow I can not connect to it using the application.
Does anyone know how to solve this?
Thanks in advance

It is an C#.NET Windows Service.
I have solved "the problem". The service was running with "local system account". That user did not had the right proxy rights to connect to the CUCM service.
So I changed the Windows Service user to the account that I use to login on that machine (with the right proxy rights) and now it is working ;-)
I figured this out because when I logged into that machine, with my account, I could connect to the CUCM service without any problems with my browser.

SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew

Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren

The remote server returned an error: (503) Server Unavailable In SharePoint 2010.

I created a web app with claims based authentication ,
basiclly i follwe this blog
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
but when i login it throws 503 error
Server Error in '/' Application.
The remote server returned an error: (503) Server Unavailable.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (503) Server Unavailable.]
System.Net.HttpWebRequest.GetResponse() +1126
System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +81
[ServerTooBusyException: The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is too busy. ]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +10258154
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +539
Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message) +0
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) +61
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) +36
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo) +26062081
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLogin() +270
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.GetSecurityTokenFromWindowsIdentity(WindowsIdentity windowsIdentity, HttpContext httpContext) +21
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.AuthenticateRequest(Object sender, EventArgs e) +1176
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
any thoughts?
thanks in advance!
Share Knowledge and Spread Love!

Hi ,
I was also facing the same issue on changing my credentials. This effects the ServiceTokenApplicationPool and other pools related to the Web applications
To resolve this follow these :
1. Open IIS Manager , under Connection section you can see the Name of your site collection(as
siteCollectionName(Username))
2. Open SiteCollection , select Application Pools. A new window with your Web application pool names would open.
3. Right click on web app, select Advance Setting... , under Process Model select Identity
4. check for Custom account , click set and enter your Credentials and click
OK
Atlast Refresh the IIS manager.
Thank you.
Under application pools Do select the ServiceTokenApplicationPool also and follow steps 3 and 4

The remote server returned an error: (401) Unauthorized error while using Microsoft.SharePoint.Client.dll

I have access to sharepoint site and I have tested this by manually creating the lists and announcements in the sharepoint site.
now the same thing when I try to do it through the c#.net code it always gives me the following :
"An unhandled exception of type 'System.Net.WebException' occurred in
Microsoft.SharePoint.Client.dll Additional information: The remote server returned an error:
(401) Unauthorized."
My code looks like below:
string userName = "[email protected]";
SecureString password = new SecureString();
foreach (char c in "abc123".ToCharArray()) password.AppendChar(c);
using (var context = new ClientContext("https://sharepoint.partners.extranet.adlabs.com/sites/UniTest"))
context.Credentials = new SharePointOnlineCredentials(userName, password);
context.Load(context.Web, w => w.Title);
context.ExecuteQuery();
Krrishna

Hi Krrishna,
You code is used to access SharePoint Online, if you are use SharePoint 2007, we can use SharePoint web service or custom web service to achieve your requirement.
Lists Web Service
http://msdn.microsoft.com/en-us/library/lists(v=office.12).aspx
Creating a Custom Web Service
http://msdn.microsoft.com/en-us/library/ms464040(v=office.12).aspx
About SharePoint 2007(MOSS 2007), you can also post it to the forum below, you will get more help and confirmed answers there.
https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointdevelopmentlegacy
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

The remote server returned an error

hi Expert,
New error I find now when trying to use dashboard application in B1. It sounds nice to have this new one since there is no info or solution in the SAP files or notes. The error message is the remote server returned an error : (407) proxy authentication required.
What could be the cause of the error ? is it bugs ? Pls adv. Thx
John

Hello
Is the DI Proxy Service is runnig? Can you test the connection from Landscape?
Regards
János

The remote server returned an error :(401) unauthorized in Provider hosted app deployment

Hi,
We are trying to deploy the provider hosted app in server environment . we are getting the "The remote server returned an error :(401) unauthorized" error after deploy the app in server.
stack Trace:
[webException:Te remote server returned an error:(401) UnAuthorized.]
System.Net.HeepWebRequest.GetResponse().
Followed the same MSDN steps , but sill same error. We have attached the certificate and using the same issuer ID in the app web.config.
Verified the IIS setting and still getting the same error when we call the "Clientcontext.ExecuteQuery()" method.
Same code is working fine in my Local dev environment.
If anyone have idea about this issue, please let me know.
Thank you,
Mylsamy

Hi ,Thank you for your response. We have tried all the options and everything is same (Client ID,Issuer ID...etc) and finally figured out the issue.The below link saved my day.http://msdn.microsoft.com/en-us/library/office/dn762439(v=office.15).aspxIn "TokenHelper.cs" GetRealmFromTargetUrl method always return null andWhen we analyze the issue we found some variable name assigned for "Realm" Instead of GUID in SP server.Power shell command to get the Realm in SP server: Get-SPAuthenticationRealmWe have followed below article to generate the new GUID for realm.http://technet.microsoft.com/en-us/library/jj219756(v=office.15).aspx$c =Get-SPServiceContext -Site "http://<websiteurl>"Set-SPAuthenticationRealm -ServiceContext $c -Realm "a686d436-9f16-42db-09b7-cb578e110ccd".
Thankyou,Mylsamy

WCF Error: The remote server returned an error: Not Found

I have a windows phone8 app that utilizes a azure WCF service. I added the Servicereference to my project,when i call the service method it executes fine but getting the following error after executing:
System.ServiceModel.CommunicationException: The remote server returned an error: Not Found
Here's the code where my error's occuring (the error occurs on the 2nd line of code within the method(the line that contains "_result =
public string EndSendMessage(System.IAsyncResult result) {
                object[] _args = new object[0];
                string _result = ((string)(base.EndInvoke("SendMessage", _args, result)));
                return _result;
Any idea why this is happening?
Thanks.

Hi Narendramacha,
It may be have more than one possibility reasons. Did you try the service URL in the phone/emulator Internet Explorer to be sure the url is accessible ? About this error, I found some solutions , please refer to :
1.maxStringContentLength: http://stackoverflow.com/a/5185678
2.FireWall: http://stackoverflow.com/a/15594388
Please try it. Any results, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Power BI analysis services connector - the remote server returned an error (403)

Similar Messages

Maybe you are looking for