Powerpivot calculation consistently results in #ERROR when using the following syntax =RELATED(Supertab[Profit loss])

Problem has arisen in Powerpivot and I have been religiously following the processes shown on numerous excel forum videos
I cannot see any difference between the syntax I submit and that submitted in the examples, yet I get errors all the time. Have I missed a step somewhere in the set up of PowerPivot. Give me a hint as I am going quietly bananas here.

Hi dfothers,
Assuming that you've correctly defined a relationship between the two tables and that Supertab[Profit loss] is on the 'many' side of the one-to-many relationship (this is the most likely scenario that you'd get an error with the formula you provided) you'll
need to apply an aggregation function to successfully pull the column into the table on the 'one' side of the relationship.
You could do this with the RELATEDTABLE function...
=SUMX(RELATEDTABLE(Supertab), Supertab[Profit loss])
...or with the CALCULATE function...
=CALCULATE(SUM(Supertab[Profit loss]))
If the relationship is in fact a one-to-one then one of the tables will still be on the 'many' side but you could use something similar to the following to return a non-aggregated value:
=CALCULATE(FIRSTNONBLANK(Supertab[Profit loss],1 ))
Regards,
Michael
Please remember to mark a post that answers your question as an answer...If a post doesn't answer your question but you've found it helpful, please remember to vote it as helpful :)
Website: nimblelearn.com, Blog:
nimblelearn.com/blog, Twitter:
@nimblelearn

Similar Messages

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

Distribution Cycle KSV5 Resulting in error when deselected the test run chk

Hi Experts,
Please help me out
iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
First Message:
Balance per segment 9999 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 9999 is not zero.
The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
2nd Message
Balance per segment 1000 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 1000 is not zero.
The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
3rd Message
No update performed due to an error
Message no. GA719
Diagnosis
A serious error occurred during processing.
System Response
Processing is continued as far as possible, but results are not posted.
Procedure
This error is shown in the error list before this error message. Here you can find more information about this particular error.
I would appreciate an early reply........!!!
Thanks & Regards,
Neela

Hi,
Check notes 764652 and 897086; it might be helpful.
Regards,
Eli

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Exec error when using the messagebox

Hi ,
We used the peoplecode function Exec in the application engine. We also used the function Messagebox to show the error message when the exec is error. But the system prompted us
Think-time PeopleCode event (Exec), but a SQL update has occurred in the commit interval.
Anyone has the same experience on this ? Thanks in advance!
The code for example,
Local number &rc = Exec(&command, %Exec_Synchronous + %FilePath_Absolute);
If &rc = 1 Then
MessageBox(0, "", 0, 0, &command);
End-If;

Well if you have any SQL in your Application Engine preceding the Exec function that it will give that error. These are think time function:
Avoid think-time functions in the following PeopleCode events:
SavePreChange.
Workflow.
RowSelect.
SavePostChange.
Any PeopleCode event that executes as a result of a ScrollSelect, ScrollSelectNew, RowScrollSelect, or RowScrollSelectNew function call.
Any PeopleCode event that executes as a result of a Select or SelectNew rowset method.
Violation of this rule can result in application failure.
The following are think-time functions:
Calls to an external DLL.
DoCancel.
DoModal.
DoModalComponent.
Exec (this is think-time only when synchronous).*
File attachment functions.
InsertImage.
Object functions, such as CreateObject, ObjectDoMethod, ObjectSetProperty, and ObjectGetProperty (these are think-time only when the object requires user action).
Prompt.
RemoteCall.
RevalidatePassword.
WinExec (think-time only when synchronous).
WinMessage and MessageBox (depending on the style parameter).
You should process the execute function Asynchronously, because it doesn't require any user intervention (assumption since it's an application engine). %Exec_Synchronous should be set to %Exec_Asynchronous.

Error when using the expression operator

Hi All
When i'm using the following expression in the expression editor i'm getting an error message "expression is not properly formed, error expression cannot be validated". But when i use the same expression in TOAD i'm getting the result. Can any one please help me where i'm going wrong?
SUBSTR (INGRP1.site_id_nbr, 1, 11)
|| DECODE (SUBSTR (INGRP1.site_id_nbr, -1, 1),
1, '1',
2, '1',
3, '3',
4, '3'
Thanks

This may be a bug in the expression validation, decode is valid in an expression operator always when Set Based code generation only is used (you may get errors if row based is used), if you configure the mapping to set based only code generation mode and default operating mode then try deploying the mapping you should be OK. Otherwise you build an expression that is valid SQL (set based) and PLSQL (row based), the CASE statement will give you this
Cheers
David

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

"Object Required" error when using the script block from the code behind

I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

Content search is it normal to get an error when using the PublishedDateOWSDATE (blog) property

basic use of Content search employed on a single blog
I use the template called 2 lines. First line is for the title, second line I would like to have either the published date or the categories (of the blog). While the latter is more complicated, I thought the date was fairly simple.
I have placed PublishedDateOWSDATE and when I saved, I got the error message
Object does not support property or method 'indexof' (corerender: {path}item-twolines.js)
What am I doing wrong?

Hi suxxxann,
Let's verify the followings:
Whether you used a custom display templete for the Content Search web part.
Whether you mapped the managed property to the associated crawled property.
I did a test, however, I couldnot reproduce your issue. My steps are:
Create a column in a library, and upload some documents into it.
Do a crawl for my content source, then create a managed property called "Test" and map it to the related crawled property.
Create a page, insert a Content Search web part.
Edit the Content Search Web Part. Expand the Display Templates section, Item: Two lines.
Expand Property Mappings, Line 1: Title, Line 2: Test.
Click OK, and save the page
In my testing, everything worked well. Please try to do as my above steps, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Getting error when using the option "Open Shared Calendar"

Hello Everyone,
I have created four calendars for our office all of them for booking meeting rooms.
Three of the four work just fine but the fourth is being a pain.
I'm running Exchange 2010 and all our clients are running Outlook 2007. I have re-created
the meeting room a couple of times just to make sure I hadn't missed anything.
When I, or another staff memeber tries to use the "Open a Shared Calendar"
withing Outlook 2007 in Calendar view, we get the below error.
Cannot display the folder. Microsoft Exchange is not available. Either there are
network problems or the Exchanges computer is down for maintenance.
Any ideas why I'm getting this error?
Thanks,
Sean

Hi Sean,
Could you please check the conference room type,whether it is an Auto Accept or Delegate Type.
checking the conference room type :
Get-CalendarProcessing conference room| fl *policy*
you may get the below results:
>Get-CalendarProcessing conferenceroom name| fl *policy*
RequestOutOfPolicy : {}
AllRequestOutOfPolicy : False
BookInPolicy : {}
AllBookInPolicy : True
RequestInPolicy : {}
AllRequestInPolicy : True
If "AllBookInPolicy : True" it mean it is an Auto Accept type and if "AllBookInPolicy : False" then it is Delegate type conference room.
If it is an Auto accept type then you should have Editor access on the concern room calendar to manage it and the same time if the room is an Delegate type you suppose to have Delegate access over the room.
To check whether you have permissions to access the room calendar.
>Get-MailboxFolderPermission -Identity conferenceroom name:\calendar
RunspaceId : b36c1c40-34df-49de-a978-792c216c211e
FolderName : Calendar
User : Default
AccessRights : {LimitedDetails}
Identity : Default
IsValid : True
RunspaceId : b36c1c40-34df-49de-a978-792c216c211e
FolderName : Calendar
User : Anonymous
AccessRights : {None}
Identity : Anonymous
IsValid : True
RunspaceId : b36c1c40-34df-49de-a978-792c216c211e
FolderName : Calendar
User : skumar(s)
AccessRights : {Editor}
IsValid : True

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

Error when using the variable System::ErrorDescription

HI All,
When I try to use the variable System::ErrorDescription I get the following error:
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
Do I need to declare it or it's a variable that always is available to get exceptions from the execution states?

if this is in a Script Task then:
- add the variable in the Script task property ReadOnlyVariables list
- in the Script Code refer to it as
string ErrorDesc = (string) Dts.Variables["System::ErrorDescription"].Value;
Jan D'Hondt - SQL server BI development

500 internal server error when using the web interface

I've created several tables in Visual Studio, and I'm using a .NET backend for my mobile services.
The table code looks something like this...
using Microsoft.WindowsAzure.Mobile.Service;
namespace AzureService.DataObjects
public class Country : EntityData
public string Name { get; set; }
I then added a scaffolded item to generate the controller for my table, then published.
I then went to my azure service, flipthechipservice.azure-mobile.net, and tried to run the default POST with default data.
I then get back a popup, which looks like the following...
Now what baffles me is I have already created another table, called 'Call', which has exactly the same 'Name' field as the above Country table, yet the Call POSTs work.
I then tried creating another table, with a Name field, and I get the 500 error again.
How can this be possibly happening? Nothing is different, and now I get 500 errors?
This makes no sense.
Thanks

Thank you, I looked at the logs, and this is the error...
System.NotSupportedException: Model compatibility cannot be checked because the database does not contain model metadata. Model compatibility can only be checked for databases created using Code First or Code First Migrations.
at System.Data.Entity.Internal.ModelCompatibilityChecker.CompatibleWithMode
I looked this error up, and tried
this proposed solution on StackOverFlow
I changed the line of code in my WebApiConfig Register() method from...
Database.SetInitializer(new MobileServiceInitializer());
to
Database.SetInitializer<MobileServiceContext>(new DropCreateDatabaseIfModelChanges<MobileServiceContext>());
I also have this in my WebApiConfig...
public class MobileServiceInitializer : DropCreateDatabaseIfModelChanges<MobileServiceContext>
protected override void Seed(MobileServiceContext context)
base.Seed(context);
My understanding is that the database should drop and create if the model changes? So why is this not happening?
I then tried another solution, and changed DropCreateDatabaseIfModelChanges to DropCreateDatabaseAlways. I still get an internal error. Then the logs show this problem...
System.Data.SqlClient.SqlException (0x80131904): Cannot open database "master" requested by the login. The login failed.
Login failed for user 'QEOzFqAnDXLogin_flipthechipservice'.
This session has been assigned a tracing ID of 'a3b12e78-90f2-4db0-a5ca-6895eebd246c'. Provide this tracing ID to customer support when you need assistance.
at System.Data.SqlClient.SqlInternalConnection.OnError
As an additional question, how do I re-generate my local SQL database when debugging on my local PC's web browser? I deleted the database, but can't seem to get it back?
Thanks

Error when using the admin photo mass upload service

I created a who's who iview and then I wanted to dispaly the photos of the asociates in the user details iview. I used the photos upload task provided.
I created the task, then when I run it I get an error (when looking in the log file)
error :
Control 5/5/08 10:53:07 AM AdminPhotoService TaskID=2104533975041, start batch photo upload for: ; Path=H:\photos; Photo Type=JPG; PortalNode=local
Error 5/5/08 10:53:07 AM AdminPhotoService TaskID=2104533975041_Parameter 'directory' is not a directory_
I tried different locations but I'm always getting the same error, Directory is not a directory and the photos are not uploaded.
Please help!!

Here is what I did,
I've put it in KM the photo and called it benelmou.jpg. I'm not using any mapping file because the file name is my ID.
I put in the directory :
accpgdci.apps.mars:50200\irj\go\km\docs\mars\Sales Portal\Sales Associates Photos
and I get in the log file:
Control 5/6/08 11:06:46 AM AdminPhotoService TaskID=2108828942357, start batch photo upload for: ; Path=
accpgdci.apps.mars:50200\irj\go\km\docs\mars\Sales Portal\Sales Associates Photos; Photo Type=jpg; PortalNode=local
Error 5/6/08 11:06:46 AM AdminPhotoService TaskID=2108828942357Parameter 'directory' is not a directory
I tried other names for the directory:
Path=
accpgdci.apps.mars:50200\irj\go\km\docs\mars\Sales Portal\Sales Associates Photos
Path=
accpgdci.apps.mars:50200\irj\go\km\docs\mars\Sales%20Portal\Sales%20Associates%20Photos
Path=
accpgdci.apps.mars:50200/irj/go/km/docs/mars/Sales%20Portal/Sales%20Associates%20Photos
Path=http://accpgdci.apps.mars:50200/irj/go/km/docs/mars/Sales%20Portal/Sales%20Associates%20Photos
And All of them failed, giving the same error Directory is not a directory.

Powerpivot calculation consistently results in #ERROR when using the following syntax =RELATED(Supertab[Profit loss])

Similar Messages

Maybe you are looking for