Powerpivot chart derived from Powerpivot table/field list

Hi
Is there a way to create a Powerpivot chart where it values are derived from a Powerpivot table?
When I am in Powerpivot, there are options to create charts, tables and both charts and tables together.
However, the chart has a separate field list than the table. Is there a way to make the chart and the table from one field list?
Paul

Hey Paul,
afaik there is no possibility. The field list cannot be configured like slicers to have an effect on this or that pivot-table / pivot-chart.
Nevertheless I don't want to disappoint you :)
You could build one pivot-table and duplicate these values to some hidden sheet on which you build on your chart. If you then change the attribute on the rows the chart should adapt (but right now I'm not sure. Imagine you change the product subcategory
(5 items) with the product (1000 items). How does the chart react?)
Does this work (for you)? :)
Kind regards
Please mark helpful posts and answers! :)

Similar Messages

  • Powerpivot pivottable - I can't add or drag a "value field" from the pivottable field list into the "values" section.

    I built a pivottable using Powerpivot.
    Initially, I can add or drag any data field I want to columns, Rows or the Values area inside the field list (those 4 squares). However, as times goes by...suddenly... I just no longer can add or drag a "value field" from the pivottable field list into the
    "values" section. 
    Does anybody know how to fix this problem ?

    Hi Bin Long,
    I tried what you suggested.
    I believe that there is a glitch in the Powerpivot field list (where you find the 4 squares for columns, rows, values, filter)
    When I initially create a pivottable with powerpivot, everything works fine when I am adding field list items to the the columns, rows, values sections, filters.
    However.....IF I close the powerpivot field list or if I save and close the excel file...then I cannot add more items to the "values" section.
    I can comment about one thing that seems different in my powerpivot field list. When I can no longer add items to the "values" section, I realized that in the TOP section of the field list I see in bold letters a summary of the items that are SUM ∑ in the "values"
    section.
    Does anybody know how to fix this ?
    Thanks.

  • Power Pivot Slicer options not showing in the Pivot Table Field list

    Excel 2013. In all the tutorials I watch when you create a Pivot Table using Power Pivot there are Slicer options in the
    Pivot Table Fields list.  Slicer Horizontal, Slicer Vertical These do not show for me.   I see Filters, Value, Row, Column only.   Is there a setting I need to turn on?   When I click on PowerPivot
    at the top, the first icon on the bar is Manage Data model, not Powerpivot as I have seen on some of the youtube tutorials.   Thank you in advance.

    Thank you for trying but it's not what I am after.  I understand how to use Slicers with pivot tables.   My question relates to Pivot Tables created using PowerPivot.   Directly under the Pivot Fields list on the right is a section where
    you choose what you want to pivot  i.e  Filters, Values, Rows, Columns.   These are standard with any pivot table.  When I watch videos on PowerPivot there are 2 additional options in the section.  Slicer Vertical, Slicers Horizontal.
     The video comments  they only show in when creating a pivot table using PowerPivot.  These 2 options are not there for me.  I don't know why. It maybe the version of office I am using which is Microsoft Office Plus 2013. I'd like them
    included.  Appreciate you taking the time to help.  

  • How to get data from COSP table, field HRKFT as the key to data from PM?

    Dear ladies and gentlemen!
    I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
    The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
    All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
    What should I do in this case?
    Thank you very much in advance!

    From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
    Of course, it's not a very good solution, but for now I know no other way to solve this problem.
    Maybe someone knows better ways? In this case I will be very grateful for any help!
    Moderator: You'd better post it on BI forums

  • From which table field could we find the 'material type' of delivery items.

    Hi,
    Please kindly advise from which table field could we find the 'material type' for one delivery items??
    Thank you.

    Hi,
    You cant get the material type directly from delivery item. Pls make a joint between LIPS and MARA tables to get the same.
    In LIPS, get the material numbers of the delivery document.
    Give them in MARA to get their material types

  • How to get metadata option list values derived from a table/view using SOAP

    I am writing an ASP.NET application that replicates some of the features of the SCS search interface. I have looked at the GET_DOC_METADATA_INFO service and its SOAP output. It has a few missing pieces of information, like the option list values for a field if that fields values are derived from a separate table/view. Some of the fields I am dealing with also make use of Dynamic Control Lists (DCL). Is there a way to get the DCL info using SOAP? I did notice that the dOptionListKey element contains the name of the view from which the option list values will be derived. However, I cannot find a service that takes the view name as a parameter to return the option list values. I have looked in the services reference manual, but I have not had any luck finding what I am looking for.
    TIA
    - Tyson
    Message was edited by: Add the word 'get' to the subject.
    Tyson

    Hello,
    What error you are getting? You code seems to be ok. I have tested below code and working fine
    XPathNavigator rTable = MainDataSource.CreateNavigator();
    String ddlSectionSelectedValue = Convert.ToString(rTable.SelectSingleNode("/my:myFields/my:ddlSection", NamespaceManager).Value);
    One think you can check that keep dropdown value display name and id same.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

  • Retrieve short description from the table field

    Hi all.
    I got this system table called TBTCO. Inside the table, there is this field JOBCOUNT. How can i retrieve the short description from the table for this particular field? Any fm can be use?
    thks

    Hi
    u can retrive the short text u want by writing simple query from the table DD03T:DD: Texts for fields (language dependent)  there u can give table name fieldname and language then u can get the short text u want
    plzz reward if i am usefull to u in any way..
    for any further quiries u can contact me on [email protected]

  • Dynamic tables derived from ddic tables

    I'm trying to create an internal table, which contains a lot of components of existing tables, but not all.
    So i tried to get the type description of the existing table, delete the not needed fields and create a new table by RTTS.
    Here is my code:
    REPORT  ZCA_SW_DYNAMIC_TYPES.
    data:
      dref          type ref to data,
      desc_table    type ref to cl_abap_tabledescr,
      desc_struc    type ref to cl_abap_structdescr,
       it_components type abap_component_tab,
       wa_components type abap_componentdescr.
    FIELD-SYMBOLS:
      <it_out>      type STANDARD TABLE.
    START-OF-SELECTION.
        desc_struc ?= cl_abap_typedescr=>describe_by_name( 'T001' ).
        it_components = desc_struc->get_components( ).
        delete it_components WHERE name = 'MANDT'.
        desc_struc = cl_abap_structdescr=>create( it_components ).
        desc_table = cl_abap_tabledescr=>create( desc_struc ).
        create data dref type HANDLE desc_table.
        assign dref->* to <it_out>.
        select *
        from t001
        into CORRESPONDING FIELDS OF TABLE <it_out>.
        write:/ 'Done'.
    This works fine, but now i'm stucked. The reason is that it_components does not contain all compoents by name, T001 has an include and an append, and these are not resolved in the table it_components. If i want to delete the component BUKRS_GLOB i cant do that cause its in an include.
    How can i get it_componets filled so that only elementary compoents are given and resulting includes are resolved?

    Hi
    Try to manage every single field (field by field) in order to create the internal table:
    .PARAMETERS: P_TAB TYPE DDOBJNAME.
    DATA: T_FIELDS TYPE TABLE OF DFIES.
    DATA: _LEN           TYPE I,
          _DEC           TYPE I.
    DATA: LR_VALUE_DESCR  TYPE REF TO CL_ABAP_ELEMDESCR.
    DATA:
      DREF          TYPE REF TO DATA,
      DESC_TABLE    TYPE REF TO CL_ABAP_TABLEDESCR,
      DESC_STRUC    TYPE REF TO CL_ABAP_STRUCTDESCR,
       IT_COMPONENTS TYPE ABAP_COMPONENT_TAB,
       WA_COMPONENTS TYPE ABAP_COMPONENTDESCR.
    FIELD-SYMBOLS:
      <IT_OUT>      TYPE STANDARD TABLE.
    START-OF-SELECTION.
      CALL FUNCTION 'DDIF_FIELDINFO_GET'
        EXPORTING
          TABNAME   = P_TAB
        TABLES
          DFIES_TAB = T_FIELDS.
      LOOP AT T_FIELDS INTO DFIES WHERE FIELDNAME NE 'MANDT'.
        WA_COMPONENTS-NAME = DFIES-FIELDNAME.
        MOVE DFIES-LENG     TO _LEN.
        MOVE DFIES-DECIMALS TO _DEC.
        CASE DFIES-DATATYPE.
          WHEN 'CHAR' OR 'LANG' OR 'CUKY'.
            MOVE CL_ABAP_ELEMDESCR=>GET_C( P_LENGTH = _LEN )
                                                          TO LR_VALUE_DESCR.
          WHEN 'NUMC'.
            MOVE CL_ABAP_ELEMDESCR=>GET_N( P_LENGTH = _LEN )
                                                          TO LR_VALUE_DESCR.
          WHEN 'INT1' OR 'INT2' OR 'INT4'.
            MOVE CL_ABAP_ELEMDESCR=>GET_I( ) TO LR_VALUE_DESCR.
          WHEN 'DATS'.
            MOVE CL_ABAP_ELEMDESCR=>GET_D( ) TO LR_VALUE_DESCR.
          WHEN 'DEC' OR 'CURR'.
            MOVE CL_ABAP_ELEMDESCR=>GET_P( P_LENGTH   = _LEN
                                           P_DECIMALS = _DEC )
                                                          TO LR_VALUE_DESCR.
          WHEN 'TIMS'.
            MOVE  CL_ABAP_ELEMDESCR=>GET_T( ) TO LR_VALUE_DESCR.
          WHEN OTHERS'.
            CONTINUE.
        ENDCASE.
        WA_COMPONENTS-TYPE = LR_VALUE_DESCR.
        INSERT WA_COMPONENTS INTO TABLE IT_COMPONENTS.
      ENDLOOP.
      DESC_STRUC = CL_ABAP_STRUCTDESCR=>CREATE( IT_COMPONENTS ).
      DESC_TABLE = CL_ABAP_TABLEDESCR=>CREATE( DESC_STRUC ).
      CREATE DATA DREF TYPE HANDLE DESC_TABLE.
      ASSIGN DREF->* TO <IT_OUT>.
      SELECT *
      FROM (P_TAB)
      INTO CORRESPONDING FIELDS OF TABLE <IT_OUT>.
      WRITE:/ 'Done'.
    Max

  • Tiny Font in PowerPivot Field List

    PowerPivot looks like a powerful tool for my users but I can't introduce it to them with such a tiny font in the pivot table field list. I'm using Windows 7, 1920x1200 screen resolution, Excel 2010 (EN-US), and PowerPivot 10.50.1747.0. Raising the magnification
    on the document does not affect the field list. 
    Thanks in advance for your help.
    Cindy Winegarden

    The PowerPivot Field List follows Excel font. So while a smaller smaller font is used by default you can increase the size without having to change
    the system font size by modifying the Excel font (File | Options | General | Font) .
    Julie

  • To find a field value from a table

    i want to get some field value from a data dictionary table.
    for eg Tragr from Mara. in Fields list it shows the field is in Mara table. but in content screen it does not showing the field at all. Actually of 220 fields of mara table only 99 fields are shown. how to view all the fields of a particular field. is there any setting is there.

    Hi Deva,
    When we execute any table by default SAP will display only few columns.(90 i guess) If we want to view all the columns of the table then do like this after executing the table i.e in ur table output.
    Menupath->Settings->User parameters->choose radiobotton
    Grid display Here u can see all the fields.
    If u don't want to see all the fields then do like this.
    Settings->listformat->Choosefields->Deselectall->Select what
    ever fields u want using the search button in bottom and press enter. It will display only selected fields.
    Some times we will come up with strange situations.
    EG: In the field list some field will be there. But if u select that field from that table in select query it will give u syntax error saying field xxx does't exist in table yyy. This field is nothing but text table field. If u want to select this field then u have to select it from the text table. U can find the text table exist for some table or not in
    Menupath->goto->text table. (In this case makt is text table for mara)
    Just check below code for ur reference.
    DATA: wa_mara TYPE  mara.
    SELECT SINGLE * INTO wa_mara FROM MARA .
    Here if u go to mara table u have field MAKTX But above select will not return the field maktx even we are refering wa_mara to data base table mara. We have to explicitly select it from MAKT.
    Hope this clarified all ur doubts.
    Thanks,
    Vinod.

  • How to check which Table & Field is populating Data source

    Hi,
    My requirment is to check from which Table and Which field the data is extracted in the data source
    Data Source : 0MAT_PLANT_ATTR
    Field in Data Source :  MINBE
    Now i want to check from where (Table/Field) in R/3 is populating the Field MINBE in Data source 0MAT_PLANT_ATTR
    How can i do that

    Hi,
    Since you have the extract structure and the extractor, you can try Extractor Checker RSA3.Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Hope this helps.
    Thanks,
    JituK

  • Default value from another table - sql query

    I'm trying to make the default value of a text item as the result from an sql or pl/sql statement. I keep getting errors when I try to use a pl/sql statement to do this. Has anyone else done this?

    OK, here is what I tried to put in. I have a form and I wanted to add a text field that is derived from another table, such as:
    select question from qa_main where seq=:quest_num
    So, what I want is to have a form where questions on tests are answered, and I want the text of the question to be brought over from the question table. I'm not sure if I'm using the correct syntax, but the ":quest_num" would be a reference to a question number in the answer table that is linked to the sequence number (primary key) in the questions table.
    Of course if there are better ideas, please let me know. :)

  • Reg: Table control list box

    Hi All,
    Can anyone please explain with sample code how to get values from the table control list box and save it the internal table.
    regards,
    karthik

    *& Report  ZTABLEC
    REPORT  ZTABLEC.
    tables : mara.
    data : it like mara occurs 0 with header line.
    data : begin of it1 occurs 0 ,
           matnr like mara-matnr ,
            end of it1 .
    data: OK_CODE  type SY-UCOMM .
    data :STATUS like zaiod3-status .
    controls : t1 type tableview using screen 1000.
    call screen 1000.
    *&      Module  STATUS_1000  OUTPUT
          text
    MODULE STATUS_1000 OUTPUT.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    select * from mara into table it up to 10 rows.
    ENDMODULE.                 " STATUS_1000  OUTPUT
    *&      Module  USER_COMMAND_1000  INPUT
          text
    MODULE USER_COMMAND_1000 INPUT.
    IF SY-UCOMM = 'SAVE'.
    IT-MATNR.
    append it .
    modify MARA from it.
    ENDIF.
    ENDMODULE.                 " USER_COMMAND_1000  INPUT
    *&      Module  create_dropdown_box  INPUT
          text
    MODULE create_dropdown_box INPUT.
    SELECT matnr FROM mara
                      INTO CORRESPONDING FIELDS OF TABLE it1.
             CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
               EXPORTING
               DDIC_STRUCTURE         = ' '
                 RETFIELD               = 'MATNR'
               PVALKEY                = ' '
               DYNPPROG               = ' '
               DYNPNR                 = ' '
               DYNPROFIELD            = ' '
               STEPL                  = 0
               WINDOW_TITLE           =
               VALUE                  = ' '
                VALUE_ORG              = 'S'
               MULTIPLE_CHOICE        = ' '
               DISPLAY                = ' '
               CALLBACK_PROGRAM       = ' '
               CALLBACK_FORM          = ' '
               MARK_TAB               =
             IMPORTING
               USER_RESET             =
               TABLES
                 VALUE_TAB              = IT1
               FIELD_TAB              =
               RETURN_TAB             =
               DYNPFLD_MAPPING        =
              EXCEPTIONS
                PARAMETER_ERROR        = 1
                NO_VALUES_FOUND        = 2
                OTHERS                 = 3
             IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
             ENDIF.
    ENDMODULE.                 " create_dropdown_box  INPUT
    IN PAI & PBO SECTION...
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1000.
    loop at it  with control t1.
    endloop.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_1000.
    loop at it.
    endloop.
    MODULE USER_COMMAND_1000.
      PROCESS ON VALUE-REQUEST.
      FIELD mara-matnr MODULE create_dropdown_box.
    FOR LAYOUT SECTION .......................
    CREATE A TABLE CONTROL SELECT A FIELD OF TABLE CONTROL ON WHICH YOU WANT TO CREATE A LIST BOX
    DOUBLE click on that open a tool box click the drop down list box select the list box .
    save check activate
    regards
    Aniruddh Singh

  • Which table field I can confirm if the PO has done invoice receipt

    Hi,
    From which table field, I can confirm the PO has done invoice receipt. and in case of that with reference a PO, I have done the IR, but it was reversed, which means PO has not done invoice receipt.
    For this case, I don't want to read table EKBE to retrieve the invoice number, the read table RBKP to judge if there is a reverse IR for it.
    If there any status table field which indicate if the PO has done invoice receipt.
    Many thanks,
    Aries

    Hi Raj,
    For invoice receipt and credit memo, EKBE-BEWTP is all set with 'Q', so if there is reversed invoice. Also you can retrieve data from EKBE. But actually the PO also needs a invoice receipt. So it can not meets the requirement.
    Regards,
    Aries

Maybe you are looking for