PowerShell cmdlets not available

I have tried to run get-netipaddress but I get the message "The term 'get-netipaddress' is not recognized as the name of a cmdlet". Why is this not available on my machine. I am running powershell version 4.
I ran this command and it says number 2 for the version. I did install version powershell version 4.
$PSVersionTable.psversion
Major Minor Build Revision
2       0        -1     -1

I just needed .NET framework 4.5 and then I was able to upgrade to Powershell 4.0. Thank you for your help.
Gotcha, I wish the WMF4 installer would just automatically pull down .Net 4.5 if it detects that you don't already have it installed.
Glad I could help.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Similar Messages

  • FSRM Powershell Cmdlets not working in Azure on Server 2012

    I am attempting to use the FSRM Powershell cmdlets on a 2012 server to configure auto quotas.  However I guess I am doing something wrong.
    Even though there are built-in templates and I have added the one I want manually and have created an auto quota from it, they do not appear to the cmdlets and the cmdlets keep throwing CimException when I try to use them to create templates and auto quotas.
    For example get-fsrmquotatemplate returns nothing and new-fsrmquotatemplate -name mydemo -size 10MB resulst in 
    new-fsrmquotatemplate : Not found
    At line:1 char:6
    + $res=new-fsrmquotatemplate mydemo -size 10MB
    +      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (MSFT_FSRMQuotaTemplate:Root/Microsoft/...RMQuotaTemplate) [New-fsrmQuot
       aTemplate], CimException
        + FullyQualifiedErrorId : HRESULT 0x80041002,New-FsrmQuotaTemplate
    Is there something I am supposed to do first to set the system up?

    Hi,
    From the result it seems that the FSRM templates cannot be found. So please check if both FSRM and Windows PowerShell 3.0 are installed in Features.
    Specifically you can test to remove and reinstall FSRM to see if issue will be fixed.
    If you have any feedback on our support, please send to [email protected]

  • FailoverCluster powershell cmdlets not running through Orchestartor

    Hello
    I have a simple powershell script :
    import-module failoverclusters
    get-cluster "clusterName"
    The above script runs perfectly fine when I run it on powershell cmd. But when I add the same script to an activity in Orcehstrator, it fails giving this error : The term 'Get-Cluster' is not recognized as the name of a cmdlet, function, script file, or
    operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    In fact none of the failover cluster commands work through Orchestrator activity.
    Please help me with this.
    Thanks
    Avanti
    Get-Cluster "VLCMUAT2SQL.parttest.extranettest.microsoft.com"

    Yes, and in Orchestrator, by default, it's version 2. In your PS console, try this:
    powershell
    -version 2
    And run your cmdlet. Tell me if the command works in command with PS version 2.
    Edit: I tried in my environment, and this is the error:
    PS C:\Windows\system32> powershell.exe -version 2
    Windows PowerShell
    Copyright (C) 2009 Microsoft Corporation. All rights reserved.
    PS C:\Windows\system32> Get-Cluster
    Get-Cluster : The term 'Get-Cluster' is not recognized as the name of a cmdlet, function, script file, or operable prog
    ram. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:12
    + Get-Cluster <<<<
    + CategoryInfo : ObjectNotFound: (Get-Cluster:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Windows\system32>
    Try this with your Orchestrator, it should works:
    $result = PowerShell {Import-Module FailoverClusters
    Get-Cluster -Name ClusterName}
    $result

  • Do OM powershell cmdlets exist on MS??

    Do OM powershell cmdlet can execute on Management Server.
    I want to run some Cmdlets on agent managed computer.
    I have a rule which get the list of discoveries for my management pack and based on their enable value (true/false), some tasks are processed.
    Now if i install the management pack on agent managed computer, the rule is failing. Is there a way through which we can run OM powershell cmdlets on a agent managed computer.
    Thanks,
    Mukul

    Hi,
    Hope the below article be helpful for you:
    SCOM 2012 – Install SCOM PowerShell Modules Without SCOM Console Installation
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    After we successfully installing the module on agent, use get-module
    command to get all available module, and use get-command -module "modulename" to get all commands that can be used in the specific module.
    Regards,
    Yan Li
    Regards, Yan Li

  • Hyper-V Powershell cmdlets 2008 R2

    I just want Hyper-V cmdlets to work on 2008 R2..
    googled, and googled, and have been all over the place, reading different stuff, attempting different solutions..
    Have read that its not possible, have read required CodePlex packages.. Or install PowerShell 4..
    Can someone reply with a proper step by step on how to accomplish this? Maybe specify different ways based on what version of PowerShell a server is on?
    Links read...
    move
    hyper-v powershell module from 2012 to 2008 r2
    Using
    Hyper-V CMDlets in Server 2008 R2?
    http://www.experts-exchange.com/Programming/Languages/Scripting/Powershell/Q_28203322.html
    http://kickthatcomputer.wordpress.com/2013/04/02/hyper-v-powershell-command-are-missing/
    http://windowsitpro.com/hyper-v/manage-hyperv-powershell

    Hi Zewwy,
    Based on my research, the
    Hyper-v module in powershell can be available since windows server 2012, and is not backward compatible.
    However, you can find good script function resource:
    CodePlex PowerShell Management Library for
    Hyper-V page to manage the hyper-v on windows server 2008 r2, for more detailed information, please refer to this article:
    Virtualization: Create Hyper-V Virtual Machines with Windows PowerShell
    I hope this helps.

  • How to send digitally sign S/MIME messages with Powershell cmdlet Send-MailMessage?

    Hello,
    using AD Windows PKI I assigned a certificate EKU (1.3.6.1.5.5.7.3.4) to sign emails and get this with
    autoenrollment also to my CERT Store PS
    CERT:\CurrentUser\UserDS\ or the certificate could found via MMC / certificates in the store structur under "Active Directory User Object".
    Signed messages (red icon) to send as S/MIME message using Outlook 2010 is not a problem.
    Using PowerShell cmdlet Send-MailMessage to be sent company notification for a new passwordpolicy some days before pwd expired?! I use the cmdlet already successfully to filling HTML bodies with variables and send to individuals accounts.
    Reduced simplified PS code:
    $SMTPBodyHtmlTemplate = Get-Content "C:\PS\Template\HTMLBody.html" | Out-String
    Function SendEmailNotification # /* SEND E-MAIL Notification to User */#
    [string] $SMTPServer = "mail.domain.local"
    $CurrentUser = "$env:username"
    [string]$SMTPFrom = (Get-ADUser $CurrentUser -properties mail).mail
    [string[]] $SMTPTo = $($Obj.EmailAddress)
    [string]$SMTPSubject = "Notification!"
    [String]$SMTPBodyHtml = $SMTPBodyHtmlTemplate.Replace("UserDisplayname","$($UserDisplayname)")
    Send-MailMessage -From $SMTPFrom -To $SMTPTo -Subject $SMTPSubject -BodyAsHtml $SMTPBodyHtml -dno OnFailure -SmtpServer $SMTPServer -encoding ([System.Text.Encoding]::UTF8) -ErrorAction Continue
    How can I use the PSDrive own CERT and using PowerShell cmdlet Send-MailMessage
    to send a signed message, without development experience?
    Thanks in advance for cooperation.
    Manfred Schüler

    Hi,
    could create with an other colleague a DLL file (with this informations) for successfully sending sign messages from PS-Script. 
    Function SendEmailNotification # /* SEND SIGN E-MAIL */#
    $SMTPBodyHtmlTemplate = Get-Content "C:\PS\Template\HTML.html" | Out-String
    [System.Reflection.Assembly]::LoadFile("C:\PS\Assembly\Cpi.Net.SecureMail.dll") | Out-Null
    [string]$strSmtpServer = "smtp.domain.local"
    [string]$strSmtpPort = "25"
    [string]$strFrom = (Get-ADUser $CurrentUser -properties mail).mail
    [string]$strFromAlias = (Get-ADUser $CurrentUser -properties DisplayName).DisplayName
    [string]$strTo = $UserEmailAddress
    [string]$strToAlias = $UserEmailDisplayName
    [String]$strSubject = "Subject as you like"
    [string]$strBody = $SMTPBodyHtmlTemplate.Replace("UserDisplayname","$($UserDisplayname)")
    $objMail = New-Object Cpi.Net.SecureMail.SecureMailMessage
    $objFrom = New-Object Cpi.Net.SecureMail.SecureMailAddress($strFrom,$strFromAlias,$objCert,$objCert)
    $objTo = New-Object Cpi.Net.SecureMail.SecureMailAddress($strTo,$strToAlias)
    $objMail.From = $objFrom
    $objMail.to.Add($objTo)
    $objMail.Subject = $strSubject
    $objMail.Body = $strBody
    $objMail.IsBodyHtml = $TRUE
    $objMail.IsSigned = $TRUE
    $objMail.IsEncrypted = $FALSE
    $objSMTPClient = New-Object System.Net.Mail.SmtpClient($strSmtpServer,$strSmtpPort)
    $objSMTPClient.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
    $objSMTPClient.send($objMail)
    Maybe Microsoft can implement this in future versions of the cmdlets Send-MailMessage ;-)
    Manfred Schüler

  • It is there an alternative to the Test-SystemHealth powershell cmdlet for Exchange 2013?

    Hello
    The Powershell cmdlet Test-SystemHealth, that was available on Exchange 2010, is no longer available on Exchange 2013.
    Test-SystemHealth cmdlet gathered data about the Microsoft Exchange system and analyzed the data according to best practices.
    Are there any alternatives to this for Exchange 2013?
    Thanks!

    Haven't really played with it too much, but check out Get-ServerHealth
    http://technet.microsoft.com/en-us/library/jj218703(v=exchg.150).aspx
    Looks to have replaced Test-SystemHealth.

  • RDS Depolyment Automation (RD-CB Not available when in PS-Session?)

    Hi all again, 
    I seem to be stuck again this is all server 2012 R2. I am attempting to fully automate a RDS deployment utilizing PowerShell, I however have ran into two problems... one being that when I am in a PS-Session on the connection broker is says that the RD Connection
    broker isn't available? Again this is while I am actually remotely connected using Enter-PSSession.
    [RD-CD FQDN]: PS C:\Users\XXX.XXX\Documents> get-rdserver -ConnectionBroker [RD-CD FQDN]
    get-rdserver : The RD Connection Broker server is not available. Verify that you can connect to the RD Connection Broker server.
    While this might not necessarily be a problem, whenever I attempt to run a Get-RDCertificate or similar command (trying to set the deployment certificates here) I am told that no deployment exists! And to me at least, what I find bizarre is that if I RDP
    to that same connection broker and look at the Remote Desktop Services tab, everything checks out and looks fine.
    [RD-CD FQDN]: PS C:\Users\XXX.XXX\Documents> Get-RDCertificate
    Get-RDCertificate : A Remote Desktop Services deployment does not exist on [RD-CD FQDN]
    So my question is - Have I missed something in the configuration of this RDS deployment? Or is this just not possible?

    Not having much luck attempted to create a new deployment to see if I had messed something up 
    $myPwd= 
    $username= 
    $password = ConvertTo-SecureString $myPwd -AsPlainText -Force  
    $cred= New-Object System.Management.Automation.PSCredential ($username, $password)
    $SessionOptions = New-PSSessionOption –SkipCACheck –SkipCNCheck –SkipRevocationCheck 
    Enter-PSSession -ComputerName "[FQDN of CONNECTION Broker]"  -Credential $cred -UseSSL -SessionOption $SessionOptions
    [FQDN of Connection Broker]: PS C:\Users\XXXX\Documents>
    New-RDSessionDeployment -ConnectionBroker "[FQDN of CONNECTION Broker]" -WebAccessServer $rdsWA -SessionHost $rdsSH
    New-RDSessionDeployment : Validation failed for the "RD Connection Broker" parameter. 
    [FQDN of Connection Broker]     Unable to connect to the server by using Windows PowerShell remoting. Verify that you can connect to the server.
     I Don't understand at all how that is possible? How is the connection broker that I am connected to via Enter-PSSession telling me that I can't connect to it via PS-Session???? haha.  Also If I run the New-RDSessionDeployment on that connection
    broker without invoke-command or ps-session It runs without any problems.
    Well I've found that if you're in the same domain you can use CredSSP to work around the issue so far... but I am still unable to seem to get this to work remotely on an Azure VM.

  • How to supply an end point to powershell cmdlet Rename-Blob

    [cross posted from http://stackoverflow.com/questions/21352295/azure-storage-cmdlet-rename-blob-wants-an-endpoint]
    I'm attempting to rename a blog to all lower case:
    Rename-Blob -BlobUrl "https://ttseast.blob.core.windows.net/images/Add.png" -NewName "https://ttseast.blob.core.windows.net/images/add.png"
    I've verified the blog URI by plugging it into a browser - however, attempting to execute the command tosses:
    Rename-Blob : Blob URI does not correspond to storage account end point. A Blob URI must contain blob storage end point.
    The arguments for Rename-Blob don't reference anything 'endpoint' - I've loaded the subscription so I should be authenticated and not forced to include AccountName/Key.
    How to I determine (or set) the required end point?
    thx

    If I'm not mistaken, I believe you're using Cerebrata Azure Management Cmdlets as Windows Azure PowerShell Cmdlets do not have a Rename-Blob Cmdlet (Cerebrata has it).
    To use Rename-Blob cmdlet, please try the following:
    Rename-Blob -BlobUrl "https://ttseast.blob.core.windows.net/images/Add.png" -NewName "https://ttseast.blob.core.windows.net/images/add.png" -AccountName "ttseast" -AccountKey "<your accountkey>"
    Thanks to Jaydonli for the alternate approach - turns out that while I thought I was using the native MS cmlets, in fact, I was using 3rd party CLI from Redgate. As per Gaurav Mantri at http://stackoverflow.com/questions/21352295/azure-storage-cmdlet-rename-blob-wants-an-endpoint

  • RDS PowerShell CMDLETS Issues

    I am working on some deployment scripts that will automatically add a Session Host to a new or existing collection at deployment. I am experiencing some inconsistency when it comes to the PowerShell CMDLETS for RDS. 
    For instance: The CMDLET Get-RDSessionCollection works on some servers and not on other servers...using the same command syntax. 
    The command I am trying to use as an example is: Get-RDSessionCollection -CollectionName "CollectionName" -ConnectionBroker "HA FQDN DNS name" I can never
    get any of the RDS CMDLETS to work when I use the HA FQDN name of the connection brokers. If I use the server FQDN of the active connection broker...it works most of the time (have notice it not working on a few servers). 
    When trying to troubleshoot why the HA name doesn't work, when doing a packet capture...I don't even see DNS queries go out to try resolve the HA FQDN name I put in...I see DNS queries go
    out for the server FQDN though. 
    Has anyone else experienced any issues with the CMDLETS? I am running Powershell as Administrator as well. 

    Hi,
    You can check the below article might useful in your case.
    Extending Remote Desktop Services using PowerShell
    http://blogs.technet.com/b/ptsblog/archive/2011/12/09/extending-remote-desktop-services-using-powershell.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Installing TFS PowerShell Cmdlets

    I cannot get the TFS PowerShell Cmdlets installed. During the install, I am not prompted to install them. And, in fact, the Typical Install text states it will not install them. After installing, then going in to modify, I do not see PowerShell Cmdlets in the
    list of features.
    I am on TFS 2013 Update 4 and PowerShell 4.0. How do I install these Cmdlets on the TFS server?

    Hi Dgjohnson,
    Thanks for your reply.
    Please download TFS 2013 Power Tools from here:https://visualstudiogallery.msdn.microsoft.com/f017b10c-02b4-4d6d-9845-58a06545627f.
    And share the custom installation features list screenshot here. 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Powershell cmdlets to access Azure Storage Analytics

    Hi,
    Are there PowerShell cmdlets to access Azure Storage Analytics data (Capacity Metrics)?
    -Vatsalya
    Vatsalya - MSFT The views and opinions expressed herein are those of the author and do not necessarily reflect the views of Microsoft.

    Hi Vatsalya,
    You could refer to this code sample about blob analytics metrics (https://gist.github.com/RichardSlater/4753866/raw/91a2bf45fb24dff4f770a1384c3e6578ecbd20d5/Get-CapacityMetrics.ps1
    ) about "StorageAnalyticsMetrics". In this sample, you didn't need to specify the container name.
    Please try it.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Powershell Module not present

    Hi,
    I have WinPE boot image and added support for Powershell (all required packages).
    Now in WinPE, I cant access the NetAdapter module (infact its not available in winpe).
    The version on PS is 4.0 , any thoughts?
    N.A.Malik

    Hi Malik,
    you sure should be able to get that result:
    (Get-WmiObject win32_NetworkAdapter -Filter "NetConnectionID = 'ethernet'" -Property MACAddress).MACAddress
    (Get-WmiObject win32_NetworkAdapter -Filter "NetConnectionID = 'wi-fi'" -Property MACAddress).MACAddress
    Cheers,
    Fred
    There's no place like 127.0.0.1
    Didn't worked in WinPE. So that's means I cant get WiFi MAC address when booted to WinPE. Can we get WiFi MAC in winpe?
    N.A.Malik

  • Is set-csclientpolicy not available for Lync Online (Office 365) ?

    Is set-csclientpolicy not available as a cmdlet to administer Lync Online?  we need to set the DisableCalendarPresence setting for our organization.

    If it's helpful, here's a listing of Lync Online cmdlets:
    http://technet.microsoft.com/en-us/library/jj994021.aspx
    As Richard noted, it's a very small subset of Lync 2013 on premises commands and set-csclientpolicy isn't one of the ones listed.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Powershell cmdlet to manage msol users

    I am looking for the powershell cmdlet that will export to a csv file, a list of msol users who do not have an Office365 Pro Plus licence. Note: All users have Standard Office licences, so the -unlicensedOnly flag would not work.

    Example Code
    #PS Version 4.0 +
    (get-msoluser -UserPrincipalName '[email protected]').licenses.servicestatus.Where({$_.ServicePlan.ServiceName -eq 'OFFICESUBSCRIPTION' -and $_.ProvisioningStatus -eq 'Success'})
    #PS Version 3.0
    (get-msoluser -UserPrincipalName '[email protected]').licenses.servicestatus | ? ({$_.ServicePlan.ServiceName -eq 'OFFICESUBSCRIPTION' -and $_.ProvisioningStatus -eq 'Success'})
    Regards Chen V [MCTS SharePoint 2010]

Maybe you are looking for