Powerview report initial loading time from Sharepoint bottle neck for almost 5 seconds

I would like to ask:
Beside the SQL Server CU10 patch update and sharepoint component update, is there some work around we can do to booze the initial load of 5 second performance bottle neck for Powerview connection?
e.g. run some schedule job to keep connection with power view service?

Hi Johnny,
If we render a Power View report that uses a PowerPivot workbook as its data source, slow performance might occur while the report is rendered. To work around this issue, we can refer to the following methods:
Reduce the complexity and number of sheets within the PowerPivot workbook.
Limit the number of Excel sheets and the complexity of what is located on them.
Limit the number of items on the Power View report.
Besides, I recommend you refer to the following article to troubleshoot Power View report performance issue:
http://blogs.msdn.com/b/psssql/archive/2013/07/29/tracking-down-power-view-performance-problems.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Reduce Flex application initial loading time

Comparing to HTML, Flex's initial load time is very long. How
to reduce the initial loading time to the level that is
comparable to HTML's loading time for the page content? Any
best practice or rules to follow?

Ok, OK! What's the specs?
How long is the load time? Please don't say "very long".
Let's see the spec. Oh, and can you give me a load time for the
mythologocal HTML page in question, just so I can compare?
I gotta tell ya, I sometimes take a nap when I'm loading half
the ASP pages I stumble across nowadays.
Here's a page from the Los Angeles times--html--- coming in @
6-7 seconds.
http://latimesblogs.latimes.com/lanow/2009/02/los-angeles-pay.html
Another example: from CNN.com, coming in at about 10-11
seconds. Unbelievable.
http://www.cnn.com/video/#/video/showbiz/2009/02/03/wynter.simpson.scientology.cnn
I've got a 350Kb Flex app using RSLs which loads in about 5
seconds. I'm kicking @ss compared to a lot of professional web
sites out there. Think that's too slow? Compared to what???

Java SP's - Initial Load Time!

FYI, We are running Oracle 8.1.7 on HP/UX 11.0 using Java Stored Procedures.
The Java stored procedures work fine (sub-second performance) after being loaded into memory, but the initial load time can be anywhere from 2 to 3 seconds. When you have 30+ Java stored procedures, the initial startup causes table locking and contention that will cause our app to crash.
Rewriting these Java SP's in PL/SQL shows that PL/SQL is immune to this initial load time (to a much lesser degree). Besides rewriting my application to read all of the Java SP's into memory before app startup, is there anything I can do on the Oracle server side to improve (or eliminate) load times for Java Stored Procedures?
Thanks!

Hi Sonja,
maybe you can help me:
I want to map a portal role (     pcd:portal_content/every_user/general/eu_role) to a user. So I use the SAP Provisioning Framework with the Job "SetJavaRole&GroupForUser". But I get following exception:
putNextEntry failed storingSPML.SAPUSER.3010
Exception from Add operation:com.sap.idm.ic.ToPassException: No such objectclass defined
Exception from Modify operation:com.sap.idm.ic.ToPassException: SPML exception: Could not update
user The given id "$FUNCTION.sap_getSPMLRoles(2371!!NEW_UME!!pcd:portal_content/every_user
/general/eu_role)"is not a unique id of a role!
In the "destination" tab of the job I entered the following values:
     SPMLID             SPML.SAPUSER.%MSKEYVALUE%
     assignedroles     $FUNCTION.sap_getSPMLRoles(%MSKEY%!!%$rep.$NAME%!!pcd:portal_content/every_user/general/eu_role)
I have no idea what's wrong in here...
Maybe you or someone else can help me...?!

How to make report with access 2010 from SharePoint Discussion lists 2013

HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
Santhiya

Hi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to export a PowerView report to Power Point in SharePoint Online? If it cannot be done,what is the alternative?

How to export a PowerView report to Power Point in SharePoint Online? If it cannot be done,what is the alternative?

Hi Tanay,
I am not aware of a control you can put in PowerPoint, however, you can insert a web browser control and reference a page in SPO (or maybe even directly the path to the workbook, didn't try that).
if you are using PowerPoint 2013 take a look
here
GALROY

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara

Does re-running a MDM Initial Load restart from the first record?

Is there a way to restart an Initial load? I was running a new initial materials load in my ECC system for MDM (MDM_CLNT_EXTR) which was running a very long time (5 days). The background job hit a bad piece of data and crashed.
My question is: when I re-run my initial load job, will it start over from the first record, or will it pick up from the last material/IDOC and resume processing? I would prefer not to re-process all 1.7M materials since the job was very near the end before it crashed.
Thanks,
Denis

Hello,
There are two modes which are available in Client Extractor, Initial and Delta.
If you select Initial it will start from the first record, that you mention in the selection Criteria.
In Delta mode, any new records created will be sent to MDM.
For your issue, in the initial mode, select the Material Number from and to, which have not been updated in MDM.
This is will ensure, that only the records that have not been sent.
Regards,
Abhishek

Slow initial load time - URGENT

I created some business component forms in jdeveloper 3.2.3. For some reason, it takes 15 seconds to load any of the forms for the first time (afterwards, it only takes 2 seconds). I get the same timings regardless of the number of rowsets I use.
It takes 15 secs for a screen with 1 rowset and for a screen with 5 rowsets. It also is slow running in jdeveloper and in production.
That is unacceptable for my end users (they are ready to reject the project because of it).
If I remove the jbInit call from the program, the load time goes down to 5 secs (which would probably be acceptable), but then I lose the navigation.
Is there any way to speed up the initial load?
TIA.

If this is a wizard generated form, was there any modification made ?. The jbInit
code by default sets up the InfoProducer objects. The ApplicationModule is then
created and queries executed when the publisSession method is called on the SessionInfo
object. This publishSession by default happens after the jbInit code. I would imagine
the publishSession method to take more time in comparision to jbInit code which
typically instantiates the UI elements and creates your form. Is there any other
setup that happens in jbinit ?.
If I remove the jbInit call from the program, the load time goes down to 5 secs
(which would probably be acceptable), but then I lose the navigation. Could you provide more info., on what you mean by navigation ?. Is is the setup of
the navigation bar and menu you are referring to ?.
HTH,
Sathish

Long Image Loading Times From LR to CS6?

Hello Folks,
I seem to be experiencing very long image loading times when loading an image into CS6 from LR4.
When I right click an image in LR4 and select edit-in CS6, CS6 immediately starts up, and loads. But after CS6 is fully up on my screen, I get
a spinning ball first, then spinning white/grey circles, until my selected image appears within CS6.
I am operatinng with an iMac 27 2.8G with 8G of memory and using SL 10.6.8 I have about 300G of free space on my HDD.
Any ideas or suggestion or settings in CS6 I might need to look at would be appreciated.
I never experienced this issue as I recall in CS5.
Jim

Curt,
Thanks, yes I do have the latest version of Snow Leopard, which is 10.6,8 and it is updated with all of the latest updates in drivers.
Jim

Intermittently slow load times from iTunes, while Netflix

TV shows from iTunes sometimes take a long time to load, while content from Netflix & Hulu seem fine. Why does iTunes sometimen indicate that it may take over an hour to load a 45min TV show?

Netflix/Hulu adapts to the connection in order to stream instantly. iTunes content is fixed and will start once enough has loaded. The time it takes is dependent on your network.
720P requires minimum 6mbps for instant stream
1080p needs 8mbps
Check speedtest.net to verify
Interference can also play a role, check istumbler or netstumbler to verify
Male sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

Spreadsheet initially loads fine 'from iTunes' but crashes when reopening

I have a spreadsheet on my Mac using Numbers 2.0.5 and I am transferring it to my iPad using iTunes.
When I load it into Numbers 1.3.1 on my iPad, it loads perfectly. The spreadsheet has 62 sheets and all the data is loaded correctly, and I can make changes to it without any problems. Since it loads correctly initially, I don't suppose that it is the complexity of the spreadsheet that is causing the problem.
When I load the spreadsheet in the normal fashion I get "Opening spreadsheet..." then ten seconds later a black screen, and then the iPad goes back to the home page.
Completely rebooting the iPad does not fix the problem.
I had this same problem with the previous version of Numbers on iPad, and I had hoped that an update would fix the problem, but this mornings update to Numbers 1.3.1 has not fixed this problem.
Help please.
Paul

Same thing happens here.
However theglenlivet12 is correct. The files should be in your itunes folder. They may not show on your playlist listing or in your library however.
Go to the directory where your music is stored. Mine was listed under itunes media, under an 'unknown artist' folder. There were 3 copies of some of my voice memos since I tried to get past the 'processing' part 3 times.
I wish there was a 'cure' for the stuck processing part though.
Message was edited by: ChrisJ1982
Message was edited by: ChrisJ1982

Photoshop CC 2014 unusual long initial loading time.

Never had this problem with Photoshop CS6.
OSX Yosemite
Macbook Pro Retina 2013
Just bought CC last night, every time I open Photoshop CC, the app works fine for a few second (before the welcome screen popup) then goes into a 45sec - 1min loading, the mouse pointer changes to the rainbow spinner during the period of time and Photoshop isnt responding to any input. After the loading is done, the welcome screen pops open and everything is fine again...its very strange and frustrating.
This is all happening without opening any image files, just trying to run PS itself.
Any ideas?

As you can see from the crash details, your AMD video card driver is crashing.
You need to update your video card driver from AMD's website (not Microsoft or a system builder).

Adobe locks when loading pdf from sharepoint site

We have sharepoint 2010 in our environment. most of our users have adobe reader x. Some have acrobat standard X as well. I personally have Adobe Reader XI. Some of our users see this issue
Intermittently where when they are on the sharepoint site and they click on a pdf and say open as read only, if the user has adobe reader default to display in browser what happens is sometimes (not always) the page will just be blank and act like it is loading. This can take up to 8 minutes. Also, if the user has it open with the software and selects edit, the document takes just as long. I was wondering why the process of opening pdfs can be so slow sometimes. Any help is appreciated

Hi MrSarcastic,
Does this happen when the end users are trying to view the same pdf simultaneously?

Report runs multiple times (from jsp) - on server

Hi
I have rdf reports deployed on the server and when i run them through the jsp, I see that it goes to rwservlet three times. Can anyone put a light into this as to what might be going on?
Thx!

what's your url?

Load data from R3 to BI for a business content infocube

Hello
How can I create infopackages and DTP to load the data from R3 to BI(PSA) and PSA to Info Cube?
and what are the neccesary infopackages for infocube 0PT_C01?
Thank ypu

Hi
While installing business content for info cube, select grouping as indataflow before.
http://help.sap.com/saphelp_em70/helpdata/en/c2/a5cfa183be443b8184aec085cf9a85/frameset.htm
In the above link you will get all the business content related personal time management.
Please refer the below link for Cube business content instalation.
http://www.google.co.in/url?sa=t&rct=j&q=0pt_c01%20info%20cube%20in%20sap%20bi&source=web&cd=4&ved=0CEUQFjAD&url=http%3A%2F%2Fhelp.sap.com%2Fbp_bw370%2FBBLibrary%2Fdocumentation%2FD13_BB_ConfigGuide_EN_DE.doc&ei=veM0T-yHL8zIrQeIrqG6Dw&usg=AFQjCNHenO_2pi4VeEMXztFpLZUqwRGbpA&sig2=ZMKgnoHQnloljqermoF_GA
Regards,
Venkatesh

Powerview report initial loading time from Sharepoint bottle neck for almost 5 seconds

Similar Messages

Maybe you are looking for