PPt's not loading from Content Library

One of my co-workers is having an issue with PPT's not loading into her meeting room from the Content Library. Once pulled into the meeting room, the doc looks like it is loading, however it stays in that mode and never loads. Any thoughts or ideas why this may be happening. Thanks!

First I uploaded the ppt into my content library. Tried to open it in my meeting room and it would not open. Next I converted it into a pptx and had the same results. From the content library and from using the url in a browser I cannot open the document. If this is a permission issue, how do I know the permission settings and how to I change the settings if needed.
Also there is no animation in the ppt, however there is some graphic that I don't belive should have any thing to do with the issue.
Thank you for you help.
Lynn

Similar Messages

Question about scrolling and Movie Clips Loaded from the Library

I hope I am posting this in the right forum.
Ok, I'm using actionscript 2.0, and I am trying to make a scrolling image gallery. I have a movie clip with three layers. the first contains a movie clip used as a scroll bar. The second is a mask used to hide the overflow content, and the third contains movie clip thumbnails. when I click one of the thumbnails, it loads a symbol containing a larger version of the picture over top of the thumbnails on the same layer. My problem is, the large image is added at the very top of the movie clip, even when it is scrolled out of sight. I want it to appear in sight, so the user doesn't have to scroll all the way back up to the top to see it. This is annoying and confusing. Is there a way to do this?
Here is the code I used to create the scroll effect (there is actually a whole lot more to the code but it is very long, so I am not adding it now. I will if it is needed though)
(Oh, and there is no text involved in this. I just got this code off a tutorial and I haven't changed the variable names yet)
    var scrollUpper:Number = 58;
    var scrollLower:Number = 309;
    var textLower:Number = 60;
    var textUpper:Number = -179;
    var scrollRange:Number = scrollLower - scrollUpper;
    var textRange:Number = textLower - textUpper;
    var startY:Number = imagesHolder_mc.thumbs_mc._y;
    function scroll(){
       var moved:Number = imagesHolder_mc.scroller_mc._y - scrollUpper;
       var pctMoved:Number = moved/scrollRange;
       var textMove:Number = pctMoved*textRange;
       imagesHolder_mc.thumbs_mc._y = textLower - textMove;
    imagesHolder_mc.scroller_mc.onPress = function(){
       this.startDrag(false,this._x,scrollUpper,this._x,scrollLower);
       this.onMouseMove = scroll;
    imagesHolder_mc.scroller_mc.onRelease = scroller_mc.onReleaseOutside = function(){
       this.stopDrag();
       this.onMouseMove = null}

Thanks for your reply. I'll try to explain it better. I have a long, vertically scrolling movie clip. This movie clip contains lots of thumbnails. When I click a thumbnail, the full sized image is loaded from the library and displayed within the same movie clip. when I click the full size movie clip, it disappears again, and I can click another thumbnail to display another full size image. So I'm not just adding more and more stuff to the gallery if that's what you were thinking. I'm just clicking thumbnails to display the full size image so I can look at it, closing it, and moving on.
But the full sized image is fixed at the very top of the scrolling movie clip, so if I click a thumbnail at the very bottom, I have to scroll all the way back up to the top to see the full size image. I just want the full size image to appear on screen no matter how far down I have scrolled to click a thumbnail.
I made my basic gallery useing this tutorial:
http://flashexplained.com/actionscript/making-the-ultimate-dynamic-image-gallery-in-flash- 8/
if you want to take a look at that, to get an idea of what I'm talking about.
Now I'm just trying to add some scrolling functionality, which wasn't included, but I don't really understand actionscript well enough to do this easily on my own.
Sorry for the long reply. I hope this is clearer.

IOS devices not loading shared media library to the end

I am having this problem for some time by now - but it did not appear shortly after any iOS update! Now what is the trouble?
I am using my iPad 3 and my iPhone 5 (newest iOS on both) alongside an Apple TV 3, a Mac mini Server and a MacBook Pro (newest OS X). The Server hosts my media library, private sharing activated by using my Apple ID. Sometimes (not always) I am sharing my library with the same Apple ID on My MacBook Pro to my home network, too. Both Macs can see and use the other Mac's shared library without any troubles - so this works. The Apple TV 3 also can connect to both libraries (though I am using the Server's much more often than the MacBook Pro's).
Neither on my iPad nor on my iPhone I can get the home shared media library loaded in complete by using the apps
"Music" and "Video".
The small loading circle symbol just stops after about 50 % and then nothing happens furthermore no matter how long I am waiting:
The only thing I can do afterwards is to force quit "Music" and / or "Videos" app, restart those and trying again, still leaving me the already described 50 % and nothing else.
What is strange about that:
"Remote" app to Apple TV and my Macs and "AirPlay" to the Apple TV just work fine. "Remote" app connects to my Apple TV and my Macs without any troubles. But "Videos" and "Music" can not load the shared library to complete. It does not matter to which Mac I am connecting (to be more exact: to which shared library). All iOS devices "see" the shared libraries, seem to connect to them at the beginning but just to refuse to load more than 50 % - and doing anything else afterwards. To make it even more strange both iOS devices were able to load everything to the end some time ago. I am not sure if there was an iOS update available in between anymore, but there definetly was an iTunes update in between!
So what I already tried (not in that order described here):
Stopping and restarting home sharing on my Macs using the initial Apple ID account.
Stopping and restarting home sharing on both Macs using another Apple ID account (and adapting the iOS devices info accordingly).
Using different Apple ID accounts on both Macs at the same time for home sharing.
Logged off and re-logged back into iTunes Store Account on my Macs and iOS devices.
Re-configured my sharing on my iOS devices using those two already mentioned accounts.
Re-initialization of the complete iTunes libray on my Mac mini Server (moving the .xml to the desktop, deleting the .itl from the iTunes folder, re-importing the .xml).
I think I have done some other steps in between, too but none of them fixes that problem. Please note: I am not using an Apple AirPort Extreme but my service provider's Modem / Router combination. I do not think the problem is located in that Modem / Router / Network connection as it once worked without any troubles. Maybe I will try to connect my AirPort Extreme to that Modem somewhat later to see if this fixes the problem.
Any help is highly appreciated!
J

Looks like I found a solution on my own...
After renaming my iTunes Mediatheque in the iTunes preferences window on my iTunes server hosted by a Mac mini all mi iOS devices were able to load my mediatheque in complete again. It took some time to get all the covers but no title is left over.
I found this solution by "accident" when I noticed too many devices used more or less the same name on my network.
Strange.

Error Code: -17004, Could not load DLL or library

Hi All,
I am getting the following error message:
Error loading step 'x' of sequence 'MainSequence' in file 'y'. Could not load DLL or external library C:\bin\driver.dll
Error Code: -17004, Could not load DLL or library.
Source 'TSAPI"
My main DLL is one written in C in LabWindows. This DLL calls a second DLL that was written in Visual C++
I am using TestStand 2010 SP1 as well as CVI/LabWindows 2010. I have WinXP Professioanl SP3.
This same sequence, DLL1, and DLL2 have worked together in previous versions of TestStand!!!! All I did was upgrade to Developer Suite 2011.......??????
I have reviewed all the posts regarding this problem and have so far done the following:
1. Verified Both DLL1 and DLL2 reside in the same directory
2. Copied DLL2 into C:\Windows\system32
3. Used Dependency Walker to verify that there are no other missing DLL's
4. Unistalled Explorer 8 and installed Explorer 7 because of somthing I saw in depends and something I read while researching this problem.
5. Verified the Search Directories in TestStand
I am wits end, as I cannot determine what the problem is and any suggestions would be welcome
Solved!
Go to Solution.

So I did come up with a solution to this problem, but I don't understand why it solves the issue. Hopefully some of you can provide some insight.
So all my sequences were experiencing the problem described, and all sequences basically call the same dll's over and over.
I have a dll that I use as my "main" dll. All my sequences use this dll and I continually add more functions as our company designes new products, etc. This dll uses functions that are from my CommDll. The CommDll was written in C++, and it is also used in several other dll's that my sequence call's as I use it for all serial/telnet requirements.
So my test sequences for example calls the following dll's usually in this particular order ---
DbDriver - This dll handles all the database functioanality for our products, and calls libMysql.dll
PwrController.dll - this dll controls a pwrcontroller for all power on/power off, reboot, etc of our product. This dll calls the CommDll.
CompanyDll - This is the "main" dll that hadles all the cli commands and other test functions that our product requires. This also calls CommDll.
When the sequence calls are done in the order above, it does not work.. However, if I switch the sequence file to call the CompanyDll before the PwrController.dll everything works fine. Is there an order of operations here????
I also found that when I compiled my PwrController.dll with CVI 2010, it gave me an error could not load PwrController.dll no matter what order the seqence calls were, leading me to believe that I am missing something when building this particular dll. As soon as I copy the original, developed and compiled in 2006, everything works again.
Thanks,
greggj

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

IPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Counters not loading from saved PerfMon html settings file in IE

The Settings html file is hosted on our internal trusted web server, the perfmon interface loads but no counters load.
If I right click and go properties there are no counters configured. If I add a counter that works, but upon reloading the page the counters do not load from the HTML source file.
I check the source of the HTML, and the counters are there, but aren't loading.

if you open the file from a local drive it does work, but I cant get it to work from a network folder.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

Apps not loading from cloud

My son just got a new iPhone 4S some of his apps are not loading from his cloud storage.

That is not the way to get Apps, they can only be downloaded from the App store.
Apps from a DVD will not be related to your iTunes account and therefore will not be transferred to your iPad.
The only way to install Apps on to an iPad is to download them from the iTunes Store.

TS3991 why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Photos Not Loading After Transferring Library

I have recently transferred my Aperture 3 Library from my old 2006 iMac to my new 2011 iMac. The folders and albums appear the same as they did on my old iMac and the number of photos in each of the folders and albums appear as a popup when I run my cursor over the each of the folders and albums, but the actual photos have not loaded into the majority of my folders and albums. The photos load when I open some of my albums (with "Loading" appearing in the bottom left corner), but not for most albums ("Processing" appears in the bottom left corner with no activity in the Browser). I initially thought that the smaller JPEG files were loading and larger RAW files were not, but this does not seem to be the case. Any ideas why I cannot see the photos even though they are apparently in the albums? Any recommendations on how to load the photos into my folders and albums?

Is it just some of the images? Are the images from different cameras? Is there a reprocess option at the top of the Adjustments tab in your Inspector? Are there blank spots where the photos should be? Are any filters applied in the search field?
Just some of the things to check. If you post a screenshot it may give us some more to go on as well.

Plug-in not loading the correct library

Hello,
I am writing a plug-in for a program and I am using eclipse as an ide. My plug-in uses other .jar files as extra libraries and 1 of those libraries is also used by the program I am writing the plug-in for. The difference is that I am using a newer version of that library. When I run the plug-in inside eclipse I have no problem what so ever, but when I create a .jar file (using the fatJar plug-in for eclipse (http://fjep.sourceforge.net/) )of my plug-in with all the libraries (.jar files) inside of that jar file I get a java.lang.NoClassDefFoundError. Because I only get an error with that class I thought the plug-in was loading the wrong library (I think it was loading the library of the main program and not the library I have added to the jar file.)To do some testing i set the classpath in the manifest to point to where my main jar file is, but that didn�t work. Does anyone know how to resolve this problem ?

It appears to be unsupported - but I don't know why. Generally when this happens it's because the person who coded it was rather sloppy with the code somewhere. Generally you can get away with some shortcuts (apparently...) when writing VST's, but there are a few apps that are absolute sticklers for obeying the rules to the letter - and Audition is notoriously one of them. So if some from the site work, and others don't, then perhaps asking the creator of them might get you somewhere...

Bookmarks will not load from dropdown menu

Hi,
i copied a lot of bookmarks over from safari to add to my existing bookmarks in firefox. The import seemed to work fine at first but soon i found that the drop down menus for my bookmarks toolbar would not load. Sometimes some and not all will load, sometimes not at all. If I open a sidebar, I can see that all my bookmarks still exist. Some have picture icons next to them, some have a blank white page icon. The ones with the blank page icons don't load from the sidebar.
I'm not the most technical and it took me hours to arrange my bookmarks. Any fix for this without having to start from scratch would be really helpful.
thanks!
Henry.

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

PPt's not loading from Content Library

Similar Messages

Maybe you are looking for