Predictive Analysis error message "[Sybase][ODBC Drivers][Sybase IQ]Syntax error near ',' on line 1

Hello,
I have a custom R component with a function that reads data from a hard configured file.
No database operations but I get this ODBC error that, I suppose, originates from PA talking to the IQ server it runs.
How can I find more about what PA tries to do, especially can I get a trace of the SQL it tries to execute?
Best regards,
Andreas

Hi Andreas,
You could start by looking at the logfiles that SAP PA produces.
From your Windows Explorer go to the directory: %temp%\sapvi\logs
Here you will find the logfiles that PA creates - as an example:
If this information is not covering your requirements turn to the SAP PA manuel on page 11, section 5.4 configuring logs where it is described how to do a custom tracing.
Good luck.
Best regards,
Kurt Holst

Similar Messages

[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.

Hi,
I am getting following error message ,
[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
When run this code.
<%@ page import= "java.sql.*"%>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
Statement st = con.createStatement();
st.executeUpdate("update tscipshift set 11-Aug-08='M' where TechN='Elamparuthi'");
%>
tscipshift=table ,column=11-Aug-08 are all exist.
I dont know why I am getting error mesage.
Any idea why?

Shahbaz2008 wrote:
you haven't set your user name and password hereI don't believe that's necessary with Access. Then again, it's not an enterprise database.
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
change it to this
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","+username+","+password+");
here pass your username and password...
In Oracle default user name and password is
username = scott
password = tigerSo who uses that? Only an eejit would leave that account open.
So the statement would be
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","scott","tiger");
or In Mirosoft Access there is no user name and password so the statement will be Like I said - unnecessary, and not the reason the OP is having problems.
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","","");>
Besides this change your table name 11-Aug-08 to anything that is not start with number or any special symbols.
for example aug112008 is good or aug is too good.No, it's still not good if you understand ANYTHING about relational databases and normalization.
I think it would work.I think you're just as stup!d as the OP.
%

Database Connection Error 42000:[Microsoft][ODBC driver for oracle] Syntax

Hi,
This is Sathish, I am trying to create a report and retrieve data through stored procedure using ODBC Connection. When connecting to the Stored Procedure it is showing Database Connection Error 42000:[Microsoft][ODBC driver for oracle] Syntax error or access violation' Error.
CRXI R2, Oracle 9i.
What do i do to solve this issue.
Regards,
Sathish

Hi Satish
It could be an issue with the driver.
You can try with the OLEDB n Oracle native connection to test if the issue persists.
Also you can refer to the [Troubleshooting Database Connectivity for Crystal Reports|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d05b3bb7-0f28-2c10-4ea3-84dbdc4e414e&overridelayout=true]
Hope this helps!!
Regards
Sourashree

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

"java ODBC Microsoft Access Driver Syntax error (missing operator) in query

Hi I am new to java and I am getting this error message when using java to access and insert data into an MS Access database.
"java ODBC Microsoft Access Driver Syntax error (missing operator) in query expression"
The commands are
String insertCommand = "INSERT into MetricOutput(A1,A,DRR,DeRR,RE,WDRR,WDeRR,WRE,ARF,SRF,HRF,WARF,WSRF,WHRF,SDC,WSDC,MAR,WMAR,H1,H11,H2,H21,cluster) "+
"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";

"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";After looking at your post in the editor, I see what your real query looks like. You realize that ",+array[i])" is part of the query, right? And not actually looking at your Java array?

Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit"

Error message on start up "Lightroom encountered an error when reading from its preview cache and needs to quit" I uninstalled and downloaded it again and still get the same error. At this rate I won't have any chance to use the 30 day trial period as it simply isn't working. I have see suggestions elsewhere to delete a particular file, but I don't have it. Any ideas?

You need to trash the preview cache. It’s in the main catalog folder.
Delete the folder with the ending Previews.lrdata
The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
N.B. do not touch files ending .lrcat

[Microsoft][ODBC Microsoft Access Driver] Syntax error

I am new to Java. I have tried to write a simple program insert table in Access2002. However, I got the following error,
ERROR: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement
My code is as follows,
import java.lang.*;
import java.sql.*;
import java.util.*;
import java.text.*;
public class dateconv3 {
public static void main (String[] args) {
//Setting up the JDBC-ODBC bridge connection
String DRIVER_NAME = "sun.jdbc.odbc.JdbcOdbcDriver";
String CONNECTION_URL = "jdbc:odbc:book1";
// The JDBC Connection Object
Connection con = null;
// The JDBC PreparedStatement object
PreparedStatement ps = null;
boolean rc = false;
try { // try under for loop
// Get an connection
Class.forName(DRIVER_NAME).newInstance();
con = DriverManager.getConnection(CONNECTION_URL);
SimpleDateFormat formatter = new SimpleDateFormat ("yyyy/mm/dd");
java.util.Date currentTime_1 = new java.util.Date();
String dateString = formatter.format(currentTime_1);
ParsePosition pos = new ParsePosition(0);
java.util.Date currentTime_2 = formatter.parse(dateString, pos);
java.sql.Date dCurDate=new java.sql.Date(currentTime_2.getTime());
System.out.println(dCurDate);
String userid = "1";
String booktitle = "Java Servlet Programming";
int amount = 202;
String sqltxt="INSERT INTO TRANSLOG ( userid, booktitle, date, amount ) VALUES (?,?,?,?)";
// Create a statement object that we can execute queries with
ps = con.prepareStatement(sqltxt);
ps.setString(1, userid);
ps.setString(2, booktitle);
System.out.println(currentTime_2);
java.sql.Date sqlDate = new java.sql.Date(currentTime_2.getTime());
System.out.println(sqlDate);
ps.setDate(3, sqlDate);
ps.setInt(4, amount);
System.out.println("INSERT into translog table");
// Execute the statement
ps.execute();
rc = true;
} catch (Exception ex) {
// Sent the error
System.out.println("ex.getMessage() print: " + ex.getMessage());
} finally {
try {
if (ps != null) {
ps.close();
if (con != null) {
// Put the connection back into the pool
con.close();
} catch (Exception ex) {
// Ignore any error here
The Access has been set to the date format yyyy/mm/dd and I got the following result.
java dateconv3
2001-01-04
Thu Jan 04 00:56:00 CST 2001
2001-01-04
INSERT into translog table
ex.getMessage() print: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement
Please advise. I got frustrated with such a silly question. Anybody can help me to resolve it.
Patrick

INSERT INTO TRANSLOG ( userid, booktitle, date, amount ) VALUES (?,?,?,?)I don't have Access on my computer at home here, but it is quite possible that "date" is a reserved word in Access's version of SQL. If you can change the column name, I'd recommend you do that. Otherwise try changing your SQL code to this:
INSERT INTO TRANSLOG ( userid, booktitle, [date], amount ) VALUES (?,?,?,?)
But be warned that this [trick] doesn't work with other databases.

I have started to get this error message: 5.1.3 bad address syntax in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice?

I have started to get this error message: "5.1.3 bad address syntax" in my email account. I am using Outlook 2011. It does not appear to be affecting sending or receiving email. I have no idea what it means or how to resolve the issue. Any advice? My email account is through Optimum online and I am using Airpost Express.
P.S. The error sound "bong" is driving us nuts!

Please post on the Office for Mac product forums that Microsoft hosts. It's their product and they can best troubleshoot the issue.

Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.

Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works.

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition

I am creating a program in Java which has a Database reference application.The Database I am using is MS Access.But whenever I am trying to run the program from DOS Prompt(ie executing the program:java <program name>) I am unable to connenct to the database.The compiling of the program doesn't show any error(ie javac <program name>) The following error is displayed at the DOS Prompt:
"[Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition."
Pls give me a detailed help report.If it is a Machine side problem do help me to solve it.Mine is a Compaq Presario Machine,OS:Windows 98,Database:MS Access(Office XP)
I request you to help me in this matter.Pls email ur responses to:
[email protected]
[email protected]

hi there
did u configure ur ODBC setting if no then try these steps
================== ODBC Settings ========================
step 1 : go to control panel
step 2 : ODBC Data Sources
step 3 : click UserDSN Tab
step 4 : click ADD Button , Select Microsoft Access Driver , Finish
step 5 : Give Datasource Name as "DATABASE_NAMEXXX" , no double quotes
step 6 : use Select and select Database_NAME.mdb from <INSTALL DIRECTORY>\DATABASE_NAME.mdb
click ok , ok finish
<INSTALL DIRECTORY> is where yr database is
=========================================================
then in yr program
URL for yr database
"jdbc:odbc:DATABASE_NAMEXXX" // as name in step 5
and Driver is
"sun.jdbc.odbc.JdbcOdbcDriver"
if u done all these steps then check yr spelling of table and tabel field in yr program
hope this works for u
regards
Satinderjit

[ODBC Microsoft Access Driver] Syntax error (missing operator)

Aello' - as you can see in my database table their are two
records to delete based on the HISTORY_ID of 1. This was working
just fine when I was using a MS SQL Server database but when I
switched to the MS Access database I get this error now.
Is their a syntax difference?

mikeap wrote:
> Attached code. Clearly their are records to delete, what
am I missing?
>
> Using MS Access database.
>
> [Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft
> Access Driver] Syntax error (missing operator) in query
expression
> 'R_PROJECT_MEDIA WHERE Media_ID IN (1)'.
>
> <cfquery datasource="tbar">
> DELETE R_HISTORY_MEDIA
> WHERE History_ID IN (#FORM.pHistory#)
> </cfquery>
DELETE
FROM R_HISTORY_MEDIA
WHERE History_ID IN (#FORM.pHistory#)
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error

Hi all,
I am able to INSERT and SELECT records from FoxPRo database successfully.
The driver is Sun JDBC-ODBC bridge
The DELETE statement throws no exception.
I've tried to execute PACK after the DELETE call and got following exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.So I tried USE MYTABLE EXCLUSIVE in a Statement before calling PACK and got the exception:
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationI've also tried inserting the USE MYTABLE EXCLUSIVE before calling DELETE but got the same exception above.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)
- Fetch data in background (checked)
I am not able to issue any of the following commands to FoxPro using java
OPEN - To open a table
CLOSE - To close a table
USE - To open a table for uer either in exclusive mode or shared mode
The exception being generated is :
java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]Syntax error or access violationThe help file of the Microsoft Visual Foxpro Driver states that the driver has support for the above commands.I a not able to get the way to issue the above commands to the driver using java.
In setting up the ODBC DSN I saw no "read only" setting.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are no delete permission grants and there is no user database sesssion concept.
I've tried all of the above with DSN mapped to a database(NOT free tables) and setting AUTO-COMMIT OFF and AUTO-COMMIT ON.But in vain. The same exceptions as those stated above persisted.
Environment:
Microsoft Windows XP Professional
JDK version "1.4.2_09"
Microsoft Visual Foxpro 06.00.8167
Microsoft Visual Foxpro Driver 6.01.8629.01
Don't know what else to try.
Can anybody please help me.
Thanks in advance
Archana

java.sql.SQLException: [Microsoft][ODBC Visual FoxPro Driver]File must be opened exclusively.
In the Visual Foxpro table, I saw no READ ONLY settings.And also, there are
no delete permission grants and there is no user database sesssion concept.
The ODBC DSN for MYTABLE is setup as:
- Free Tables (not database)
- Null (checked)
- Deleted (checked)If you're using Visual Foxpro database(.DBC), you should see "Exclusive" option too. You can try check it, but I don't know whether your issue will disappear.

[Microsoft][ODBC driver for Oracle]Syntax error or access violation

Hi,
When I am trying to connect to Oracle 8.1.6 database using Microsoft ODBC driver for Oracle. The connection is established.
But while creating CallableStatement, I am getting error "[Microsoft][ODBC driver for Oracle]Syntax error or access violation".
What I need to do to resolve this problem.
Raj

Hi Satish
It could be an issue with the driver.
You can try with the OLEDB n Oracle native connection to test if the issue persists.
Also you can refer to the [Troubleshooting Database Connectivity for Crystal Reports|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d05b3bb7-0f28-2c10-4ea3-84dbdc4e414e&overridelayout=true]
Hope this helps!!
Regards
Sourashree

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Predictive Analysis error message "[Sybase][ODBC Drivers][Sybase IQ]Syntax error near ',' on line 1

Similar Messages

Maybe you are looking for