Preloader in presentation slide for flash 8

Hi
Does anybody know how to or is it even possible to create a
preloader in a presentation file for flash8? I hope some one has
the answer to this as i have tried looking every where.
Thanks

yes it is possible, try a search for preloaders in this
forum.

Similar Messages

How to create volume slider for flash cs 5 using action script 2.0?

how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
stop();
mySoundBtn.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip");
          mySoundC.start(0, 10); //10 represents the number of loops
          gotoAndPlay(2);
This sound plays till 3-4 scene ahead.
Can anyone help me?

Hey thnx Ned.
this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
Below is my slider code for sound.
onClipEvent (load) {
    mySound1 = new Sound();
    mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
    mySound1.onSoundComplete = function() {
    mySound1.start();
    mySound1.start(0.058,999);
onClipEvent (enterFrame) {
    downloaded = mySound1.getBytesLoaded();
    total = mySound1.getBytesTotal();
    if (downloaded != total) {
        _root.dl = "You have to buy this software...";
    } else {
        complete = 1;
        _root.dl = "";
    mySound1.setVolume(ratio * 2);
This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
Below is my button code.
stop();
mySoundBtn4.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip4");
          mySoundC.start(0, 300); //10 represents the number of loops
          gotoAndPlay("play1");
this is on button's frame.not exactly on button.
Button and Slider both are on diffrent scene.
Can you plese help me out?

Overview presentation slides for SAP Netweaver Portal 7.0

Hi,
for a presentation to customers I'am looking for a document ( as ppt or pdf ) or slideshow which gives a good complete overview of all main business and technical aspects of NW Portal plattform on a high level ( Content Integration, SSO, Navigation, Portal Layout, collaboration etc.) including approximately 50 slides.
In the various wiki and article sections I've found only several documents whichs handles special topics like installation or develoment.
If this is not the right forum for this kind of question, please give me a hint where to place this question.
Thanks a lot for your help !
kind regards
Markus

Joerg Markus wrote:Hi Markus,
>
> Hi,
>
> for a presentation to customers I'am looking for a document ( as ppt or pdf ) or slideshow which gives a good complete overview of all main business and technical aspects of NW Portal plattform on a high level ( Content Integration, SSO, Navigation, Portal Layout, collaboration etc.) including approximately 50 slides.
>
I'm not sure if you'll be able to find such a "one-size-fits-all" document. Even if you find one, wouldn't it be copyrighted?
> In the various wiki and article sections I've found only several documents whichs handles special topics like installation or develoment.
>
May I suggest you go through these specific documents to research and create your own presentation for your own customers?
Regards,
Dao

I need XI introduction slides for presentation~Where I can get it?

Dear XI consultant:
I need XI introduction slides for presentation~Where I can get it?
I try to make a XI presentation slides for our customer~
Does SAP provide a formal slides for XI presentation?
It's better there is an case example in it.
Coz I'm a beginner of XI.thanks for your help~
Regards
Jack Lee

Hi Jack
Latest version is PI 7.1
This is overview document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ed3b8c-698c-2a10-fbaf-b1df0c82fc8a
Thanks
Gaurav

Dual Slider Component for Flash

Hi!
I need dual slider for flash. I found for flex but my project
is in Flash.
Dual Slider is something like this
example
Thanks

Interesting! You should be able to make one pretty easily,
what do you need it to control? And does it have to be a Component?
(although this can also be constructed).

Problems using Flash Presentation / Slide with IE

I have created a slideshow using the Flash presentation /
slide component. All images are the same size. When the movie loads
in Firefox, the slide show works fine. However in IE, the first
image is loaded off center. The top left corner of the image is
placed in the center of the screen. All subsequent images load
fine. This is an intermittent problem as it does not happen all the
time.
Has anyone seen this problem and know of a solution.
Thanks in advance.
Jim

Is this Virtual Credit Card Number software a website or a stand alone application? If stand alone, then I would recommend installing the Active X (Internet Explorer) version that you can download here: http://get.adobe.com/flashplayer/otherversions

Oracle content presenter template for a flash banner with onclick property

Hi all,
I m using webcenter portal applicaiton which a banner on my home page.On click of the flash banner, we navigate it to a specific page in my applicaion(i.e on my application resides a page called test, if i click my flash banner it will navigate to that speicific page.
My application connects with oracle content server(ucm) to fetch the content.
Now i tried to fetch the flash banner from Oracle Content server. When i fetch the banner from ucm by cmf:renderproperty using a content presenter template, the flash banner is not navigating to the test page as it did early.
It takes the path from ucm(like http://xxx:16200/cs/public/do...). I tried using af:inlineframe but still getting the same path like http://xxx:16200/cs/public/doc...)
Kindly help me out.
Thanks
S. Muthukumaran

Hi All,
Any update on this?
Thanks

Presenter Slides with Video Buffer forever

We have several Adobe Presenter presentations hosted on Rustici Cloud, and the problem we have is that each slide buffers for a second or two before playing. But the real issue is that slides with mp4 video in the slide, appear to buffer forever.
These courses were originally authored in Presenter 7, and then recently opened and edited in Presenter 8 to make small changes. It appears that once the course was published in Presenter 8, the buffering issues began.
Anyone ever experienced similar and any ideas for how to fix it?

Presenter 8 changed the default setting for controling pre-loading of flash content. In 7 and older, there was no limit on preloading content, unless you set it. In Presenter 8, the default is to disable the pre-loading for Flash content (SWF, FLV, MP4). This is what is likely causing each slide to buffer and the videos to have a long buffer. You can change this setting in Adobe Presenter > Settings > Quality and it will be the option in the image below. Un check it and then republish.

"the activex control for flash player could not be registered" - Solutions Roundup

I recently ran into this problem on my computer:
http://at32.s3.amazonaws.com/flash_install_problems2.jpg
I am a Flash developer (as in I write SWFs, I don't work for Adobe). and when I updated IE to 10.2, "the activex control for flash player could not be registered". Since I am a developer, I also have Firefox and Chrome installed, with Flash running without problems. For a long time now, Internet Explorer has used a different version (ActiveX) to the other browsers, which use plugins. I am a strong supporter of Flash, it's great to develop with and has a very wide feature set which is growing all the time, unlike fixed technologies/standards. However, the weakest part is the install process - I don't understand why their is a Download Manager. Google Chrome does it's best (so far) by managing the install/update process entirely in the background. Anyway, it was in my best interest to try and get to the bottom of this.
For the record, on the problem machine I have Windows 7 with IE8, but I have seen almost identical symptoms with IE9, Windows XP SP3, as well as various iterations of Flash Player (10.0, 10.1, 10.2 and even some final editions of version 9).
First I tried the standard support here:
http://kb2.adobe.com/cps/191/tn_19166.html
Basically, doing the manual uninstall and manual install of the latest version (without using the download manager, or have IE open). This did not work. I also tried the Microsoft "subinacl" program, together with "reset_fp10.bat". This didn't work either. However, you should try all of these things first before progressing further.
A quick note about people who had tried running the following at a command prompt: "secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose"
I didn't do this, because on investigating further it didn't seem to work with Windows 7, only Windows XP, Windows 2000 or Windows 2003 - though there was a few threads where this had fixed the problem for some users.
For my solution, it is recommended you use the manual uninstall / installers, so you should have them downloaded ready to use.
I then heard about problems with permissions in the registry with the key: HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
So I opened regedit.exe (start - run - typed "regedit.exe"), navigated to the key and sure enough, I couldn't open it - permission denied - even though I had an administrator account. If for some reason, you can access this key (and any subkeys), then it's likely the following fix will not resolve the problem.
I then done further diagnosis, by using Process Monitor to try and install Flash Player, and I got the following:
http://at32.s3.amazonaws.com/flash_install_problems.gif
This shows all the access denied errors the Flash Player install was experiencing when trying to write to the registry key. This confirmed that this was the problem. I only stress this because several people said it was unwise to tinker with the registry. Though this is common advice, this is the only known fix for this precise problem at present, since you need to manually adjust the permissions yourself. I don't know who is at fault here - Microsoft or Adobe - but let's just get Flash fixed...
The solution:
Firstly, you may want to backup your registry, or the exact key. I didn't do this so I've provided no instructions on how to, but it is recommended for the paranoid. Also make sure as much software is closed down as possible - browsers, IM software, any junk in your system tray. As way of example, I happened to have "BBC iPlayer" installed and running in the background which uses Adobe AIR and Flash Player, so I exited that too.
1) Open regedit (start - run - type "regedit.exe"). You may need to right click on it and select "Run As Administrator", but I didn't as my account was already administrator.
2) Navigate to the key. HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
Click on it to confirm that you cannot access it (you will get an error) - if their are no problems - this probably isn't the cause of your issues.
3) Right click on it and click Permissions, and ignore any message that may pop up.
4) Under "Group or Usernames" click "Add". Type your account name name, or "Administrators" in the box, then "Check Names" to format it correctly, then Ok.
5) Now on the next screen click the checkbox to enable Full Control (this will also automatically enable "Read" permission too).
6) Click Advanced, then the "Owner" tab at the top. You will see that their is no "Current Owner". This is what we will now fix.
7) Click on your name to change the owner to (I went for Administrators). Also enable the checkbox entitled "Replace Owner on subcontainers and objects". Then click Ok. You will get an error message, which you can try clicking Retry to, but hit Cancel - this is not a problem.
8) Click Ok a couple of times and this part of your registry is now fixed.
9) Now it's a simple case of running the manual Flash uninstall program, then finally the manual Flash installer (for Active X - not the Firefox/Chrome plugin versions). To my surprise, after a couple of days looking into this - I finally had a solution and Flash in IE once more. If you are using Firefox too you may find Flash is no longer installed their (the uninstaller removed it). In this case just install via the Adobe site or try to watch a video on You Tube and you will be prompted or linked to the install.
Hope this provides a good round up of the possible solutions to this problem. Hopefully Microsoft or Adobe can find out what causes this issue in the first place so we don't have to go down this route for much longer. Chrome's implementation of Flash shows how effortlessly things can work!

They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

If you had never saved the file at any time, you have lost your work.
Go to; Apple Menu > Force Quit
Start a new presentation, and from now on, after adding the first object to the slide, save the file.

How to select slides for exporting as QuickTime movie?

Is there a way to select only a range of slides for exporting as a QuickTime movie? I can hide the slides I don't want the movie to contain, then show them after the export, but this is very tedious. Is there a function like the "print range" when printing that will let me do this easier?
(My presentation is 100+ slides, all with animations, which I want to export as a series of short movies of 3-6 slides each.)

Probably easiest to open a new Keynote and drag the thumbnail of the slides you want in the Quicktime to the new presentation.

(presenter 7.0.7) presentations halt for no apparent reason at quiz questions

I have checked the quizzes in my course a thousand times, and I am positive they are set up right (see below for setup). But I still get random crashes at quiz slides while viewing the presentation. Any ideas about what is wrong? Could it have anything to do with hidden slides? Is there some time-out value that I need to set? Is this a problem with lengthy courses (mine is 150 slides)?
There is no video or audio in the slides.
Quiz design: If the answer to quiz A is wrong, the presentation sends you to the slide that precedes quiz A, which is a hidden review slide. You read the review and then advance to the quiz again. If the answer to quiz A is right, you are advanced two slides ahead, to quiz B--this skips you over the (hidden) review slide for quiz B.

Hi Kumar,
It is a halt. As soon as I select an answer on the quiz page, the presentation appears to stop running. I don’t get any acknowledgement response, and I can’t scroll to a previous page. If I click the refresh button in my browser (firefox), the presentation re-launches from slide 1.
thanks, Becky

Support for Flash?

Does anyone know if Quicktime will support playback of Flash (.swf) files again anytime soon? I keep waiting for Flash support to return to Quicktime, but it's been over a year now.
I have a ton of Keynote presentations that are going to become completely obsolete unless support for Flash is reintroduced to Quicktime.
I downgraded my Quicktime Player to 7.2 (as far as I can tell that was the last update that allowed you to enable Flash playback), but I realize this is not a workable solution forever.
Is there another solution other than running 7.2? Are there any third party programs that allow Flash playback within Quicktime? I've looked but haven't discovered any. Am I just missing some obvious solution?

According to this post from the Keynote group, you can turn on flash w/in QT.
Alas I don't see that option — having said that I looked at mime types and legacy encoders and nada, but oddly when I went to check the QT version in the "About Quicktime" (accessed via the *System Preferences*) it cycles thru various codecs and "Macromedia Flash Player" is one of them... guess it doesn't access anymore. :o(
{quote:title=http://discussions.apple.com/thread.jspa?messageID=9070834&#9070834:}{quote}
Quote:
Re: Does Keynote Import Flash SWF Files?
Posted: Feb 27, 2009 8:40 AM in response to: Scot Walker
Reply Email
To have Keynote accept and play Flash files go:
Apple Menu > System Preferences > QuickTime > Advanced > check Enable Flash
Peter
Aluminium iMac 24" 2.8Ghz Mac OS X (10.5.6)

Develop plugin for flash

I want to develop a small plugin for flash. Please guide me how to start.

Hi I too have same problem please see below :
I have developed Java based embedded browser which could be port on Set-Top Box under embedded linux. presently my embedded browser supports all most all internet standard protocols such as Html/Java Script, CSS, XML/XSLT/DOM, HTTP/HTTPS, SSL, CACHE/COOKIE ..Etc. But not multimedia protocols such as Flash Plug-In, Real Player.. etc
Now I am trying to implement Macromedia Flash Plug-in with my java based embedded browser, But not having much idea on Flash plug-in implementation .
Can any body suggest or help How can I embed Macromedia Flash plug-in?
What should I required to do ?
Any open sources or API also greatly appreciate..
Thanks in advace
sincearly
madhu

Preloader in presentation slide for flash 8

Similar Messages

Maybe you are looking for