PrePositioning Scroll to a specific Row in ALV Grid

I have an object of type cl_gui_alv_grid which is about to display, let's say, 200 rows.
I want it to come up pre-scrolled down to say row 80 - any ideas ?
I still want 200 rows available.
Any ideas (via a public method) ?
Is there an option that can be passed through set_table_for_first_display() ?
...Mike

Hi,
try SET_SCROLL_INFO* methods of CL_GUI_ALV_GRID.
Regards,
Przemysław

Similar Messages

Set specific rows in ALV grid ready for input

Hi everyone,
I have a question about how to set specific rows in ALV grid ready for input.
I know that I can make some columns ready for input before the ALV displayed,but I have no idea how to make specific rows displayed in the ALV ready for input.

Hello Aaron
For editable columns we can use the fieldcatalog (LVC_S_FCAT-EDIT = 'X') but for rows you need to define editability on cell level.
The required steps are documented in sample report BCALV_EDIT_02. Below I point out a few crucial points:
*§1.Extend your output table for a field, e.g., CELLTAB, that holds
*   information about the edit status of each cell for the
*   corresponding row (the table type is SORTED!).
DATA: BEGIN OF gt_outtab occurs 0. "with header line
        include structure sflight.
DATA: celltab type LVC_T_STYL.
DATA: END OF gt_outtab.
*§3.Provide the fieldname of the celltab field by using field
*   STYLEFNAME of the layout structure.
   gs_layout-stylefname = 'CELLTAB'.
   CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab[].
Note: in the sample report only field SEATSMAX is editable. In your case you need
to fill CELLTAB for all fields in a row.
*§2.After selecting data, set edit status for each row in a loop
*   according to field SEATSMAX.
LOOP AT gt_outtab.
    l_index = sy-tabix.
    refresh lt_celltab.
    if gt_outtab-seatsmax ge 300.
        perform fill_celltab using 'RW'
                             changing lt_celltab.
    else.
        perform fill_celltab using 'RO'
                             changing lt_celltab.
    endif.
*§2c.Copy your celltab to the celltab of the current row of gt_outtab.
    INSERT LINES OF lt_celltab INTO TABLE gt_outtab-celltab.
    MODIFY gt_outtab INDEX l_index.
ENDLOOP.
ENDFORM.                               " SELECT_DATA_AND_INIT_STYLE
NOTE: LVC_T_STYL is a SORTED table type. Thus, take care that you are using the
INSERT ... INTO TABLE statement and not APPEND (because then nothing is appended
to the CELLTAB itab).
IF p_mode EQ 'RW'.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
*    to status "editable".
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
ELSE. "p_mode eq 'RO'
*§2b.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_DISABLED to set a cell
*    to status "non-editable".
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
ENDIF.
ls_celltab-fieldname = 'SEATSMAX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT ls_celltab INTO TABLE pt_celltab.
Regards
Uwe

Color a specific row in ALV GRID display when user clicks on that row

hi
i have the entire code ready of how to check the line selected by the user and also to color that line but after settings those parameters
for to refresh the GRID so that the row apppears coloured .plz reply soon.... points will be awarded.....
wat i have done is
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 i_callback_program = i_repid
 i_callback_user_command = 'USER_COMMAND'
 is_layout = it_layout
 it_fieldcat = int_fieldcat
TABLES
 t_outtab = int
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
to display the GRID then when user clicks on any row this module gets called
 FORM user_command USING r_ucomm TYPE sy-ucomm
 rs_selfield TYPE slis_selfield.
 READ TABLE int INDEX rs_selfield-tabindex.
 int-rowcolor = 'C410'.
 MODIFY int INDEX rs_selfield-tabindex TRANSPORTING rowcolor.
 it_layout-info_fieldname = 'ROWCOLOR'.
then again i call 'REUSE_ALV_GRID_DISPLAY'
to display the GRID with the user selected line colored . the problem with this is when u go back from this screen u go to the previously displayed grid ....... whihc i dont want .....
 ENDFORM. "user_command

Hi,
By using following code,you can set the colors for each row,
Change this based on your requirement.
TABLES VBAK.
TYPE-POOLS SLIS.
Data Declaration
TYPES: BEGIN OF T_VBAK,
 VBELN TYPE VBAK-VBELN,
 ERDAT TYPE VBAK-ERDAT,
 ERNAM TYPE VBAK-ERNAM,
 AUDAT TYPE VBAK-AUDAT,
 VBTYP TYPE VBAK-VBTYP,
 NETWR TYPE VBAK-NETWR,
 VKORG TYPE VBAK-VKORG,
 VKGRP TYPE VBAK-VKGRP,
 LINE_COLOR(4) TYPE C,
 END OF T_VBAK.
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK INITIAL SIZE 0,
 WA_VBAK TYPE T_VBAK.
ALV Data Declaration
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
 GD_REPID TYPE SY-REPID.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BLD_FLDCAT.
PERFORM BLD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
Build Field Catalog for ALV Report
FORM BLD_FLDCAT.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-SELTEXT_M = 'Sales Document'.
FLDCAT-COL_POS = 0.
*FLDCAT-EMPHASIZE = 'C411'.
FLDCAT-OUTPUTLEN = 20.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-SELTEXT_L = 'Record Date created'.
FLDCAT-COL_POS = 1.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-SELTEXT_L = 'Cteated Object Person Name'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-SELTEXT_M = 'Document Date'.
FLDCAT-COL_POS = 3.
FLDCAT-EMPHASIZE = 'C110'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VBTYP'.
FLDCAT-SELTEXT_L = 'SD Document category'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'NETWR'.
FLDCAT-SELTEXT_L = 'Net Value of the SO in Document Currency'.
FLDCAT-COL_POS = 5.
FLDCAT-OUTPUTLEN = 60.
FLDCAT-DO_SUM = 'X'.
FLDCAT-DATATYPE = 'CURR'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKORG'.
FLDCAT-SELTEXT_L = 'Sales Organization'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKGRP'.
FLDCAT-SELTEXT_M = 'Sales Group'.
FLDCAT-COL_POS = 7.
FLDCAT-EMPHASIZE = 'C801'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
ENDFORM.
Build Layout for ALV Grid Report
FORM BLD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
GD_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
GD_LAYOUT-CONFIRMATION_PROMPT = 'X'. This asks the confirmation before leaving the screen.
ENDFORM.
Display report using ALV grid
FORM DISPLAY_ALV_REPORT.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = GD_REPID
 IS_LAYOUT = GD_LAYOUT
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_GRID_TITLE = 'SALES DOCUMENT HEADER'
 IT_FIELDCAT = FLDCAT[]
 I_SAVE = 'X'
TABLES
 T_OUTTAB = IT_VBAK
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Retrieve data from VBAK table and populate itab IT_VBAK
FORM DATA_RETRIEVAL.
DATA LD_COLOR(1) TYPE C.
SELECT VBELN ERDAT ERNAM AUDAT VBTYP NETWR VKORG
UP TO 20 ROWS
FROM VBAK
INTO TABLE IT_VBAK.
LOOP AT IT_VBAK INTO WA_VBAK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBAK-LINE_COLOR.
MODIFY IT_VBAK FROM WA_VBAK.
ENDLOOP.
ENDFORM.
FORM TOP_OF_PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
 W_HEADER TYPE SLIS_LISTHEADER.
W_HEADER-TYP = 'H'.
W_HEADER-INFO = 'WELCOME HEADER LIST'.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'REPORT:'.
W_HEADER-INFO = SY-REPID.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'DATE:'.
CONCATENATE SY-DATUM6(2) ' / ' SY-DATUM4(2) ' / ' SY-DATUM(4) INTO W_HEADER-INFO.
APPEND W_HEADER TO T_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = T_HEADER
ENDFORM.
Reward points,if it is useful.
Thanks,
chandu.

Coloring of a (specific) row in ALV report-How?

Hi Experts,
Am looking to assign a color for a (specific)row in ALV report.......so, pls. let me know How to get it done?
thanq

TABLES:LFA1.
SELECT-OPTIONS:LIFNR FOR LFA1-LIFNR.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
REGIO LIKE LFA1-REGIO,
SORTL LIKE LFA1-SORTL,
CFIELD(4) TYPE C,
END OF ITAB.
data:col(4).
data:num value '1'.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE LIFNR
IN LIFNR.
LOOP AT ITAB.
concatenate 'C' num '10' into col .
ITAB-CFIELD = col.
num = num + 1.
if num = '8'.
num = '1'.
endif.
MODIFY ITAB.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:EVE TYPE SLIS_T_EVENT WITH HEADER LINE.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-WINDOW_TITLEBAR = 'VENDORS DETAILS SCREEN'.
LAYOUT-EDIT = 'X'.
LAYOUT-info_fieldname = 'CFIELD'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
this is for coloring cols
REPORT ZBHCOLOR_COLS.
TABLES:LFA1.
SELECT-OPTIONS:C_LIFNR FOR LFA1-LIFNR. " FOR GRID ONLY
PARAMETERS:LIST RADIOBUTTON GROUP ALV DEFAULT 'X',
GRID RADIOBUTTON GROUP ALV.
DATA:BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
LAND1 LIKE LFA1-LAND1,
ORT01 LIKE LFA1-ORT01,
SORTL LIKE LFA1-SORTL,
REGIO LIKE LFA1-REGIO,
COL TYPE LVC_T_SCOL,
END OF ITAB.
DATA:COLR TYPE LVC_S_SCOL.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB.
LOOP AT ITAB.
IF ITAB-LIFNR IN C_LIFNR.
COLR-FNAME = 'NAME1'.
COLR-COLOR-COL = '5'.
COLR-COLOR-INT = '1'.
COLR-COLOR-INV = '0'.
COLR-NOKEYCOL = 'X'.
APPEND COLR TO ITAB-COL.
COLR-FNAME = 'LIFNR'.
APPEND COLR TO ITAB-COL.
MODIFY ITAB.
ENDIF.
ENDLOOP.
TYPE-POOLS:SLIS.
DATA:FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA:LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-ZEBRA = 'X'.
layout-coltab_fieldname = 'COL'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = SY-REPID
CHANGING
CT_FIELDCAT = FCAT.
IF LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ELSEIF GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
TABLES
T_OUTTAB = ITAB.
ENDIF.
Reward points if useful.

Possible to have vertical scroll bar for a cell in ALV Grid (using methods)

Hi All,
I have a field with length 100 characters on a ALV Grid (using methods)..User doesn't want to scroll all the 100 characters horizontally to see the whole text rather he wants to have a vertical scroll bar for the cell so that he can scroll vertically.
Is it possible to have split the cell text into lines and have a vertical scroll bar for a cell in ALV Grid?
Regards
Jaker.

Thanks for the suggestion Balu.I tried this , but while scrolling,headers also getting scrolled.
Becoz of this , if i scroll down to the last row,headers are getting hidden.
Headers should always be static.only the data should scroll.
Since h:datatable is being rendered as one table , i can div tag for this table alone.
If i have seperate datatable for headers alone i can do this .But i should not use two datatables.

Deactivate the double click/ hot spot for a particular row in alv grid.

Hello,
 As per a certain condition how to deactivate the double click/ hot spot for a particular row in alv grid.
Regards,
Saroj

where u define layout there is a field hotspot.like
data: var.
if con is true
var = 'X'. (show hotspot)
else.
var = ' '. (deactive hotspot)
elseif ws_fieldcat-fieldname = 'DMBTR'
 AND ws_fieldcat-tabname = 'T_MTAB'.
 ws_fieldcat-do_sum = C_X.
 ws_fieldcat-hotsopts = var.
 MODIFY Wt_fieldcat FROM ws_fieldcat
 TRANSPORTING DO_SUM.
It is helpful for u. if any problen send me ur coding i will change it.
Regards
Manish Kumar

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

Color a row with ALV GRID

Hi my friends,
I have written a small ALV Grid where some rows should be colored, dependend on their status in a table. But it's not working and I can't find out, why it is not working. I've already studied all the topics in this forum, which are related to 'row color alv grid', but I can't find the mistake in my code. Is anyone able to find out what is wrong here?
Thanks a lot for your help!
*& Report /BMC_TST_SHOWLOG
REPORT /BMC_TST_SHOWLOG.
TYPES: BEGIN OF log_table.
TYPES: log_level TYPE /bmc_log_message,
 cr_date TYPE /bmc_cr_date,
 message TYPE /bmc_log_message,
 linecolor(4) TYPE c.
TYPES: END OF log_table.
DATA: lt_log TYPE TABLE OF log_table with HEADER LINE,
 lt_log2 TYPE TABLE OF log_table with HEADER LINE,
 lt_log_list TYPE TABLE OF log_table,
 lt_line LIKE LINE OF lt_log_list,
 container_r TYPE REF TO cl_gui_custom_container,
 grid_r TYPE REF TO cl_gui_alv_grid,
 gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_LOG',
 fieldcat_r TYPE lvc_t_fcat,
 layout_r TYPE lvc_s_layo,
 logA TYPE /bmc_log_level,
 logB TYPE /bmc_log_level,
 logC TYPE /bmc_log_level,
 logD TYPE /bmc_log_level,
 logE TYPE /bmc_log_level,
 ls_ct TYPE lvc_s_scol,
 ok_code LIKE sy-ucomm.
*DATA BEGIN OF ls_log_list OCCURS 0.
*DATA: log_level TYPE /bmc_log_message,
* cr_date TYPE /bmc_cr_date,
* message TYPE /bmc_log_message,
* rowcolor(4) TYPE c.
*DATA END OF ls_log_list.
*DATA: lt_log_list TYPE TABLE OF log_table.
PARAMETERS: loglevlA TYPE c AS CHECKBOX,
 loglevlB TYPE c as CHECKBOX,
 loglevlC TYPE c As CHECKBOX,
 loglevlD TYPE c aS CHECKBOX,
 loglevlE TYPE c AS CHECKBOX,
 dateA TYPE /bmc_cr_date OBLIGATORY,
 dateB TYPE /bmc_cr_date.
CALL SCREEN 0200.
MODULE user_command_0200 INPUT.
CASE ok_code.
 WHEN 'BACK'.
 SET SCREEN 0.
 MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
 WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0200 OUTPUT.
SET PF-STATUS 'DYNPRO200'.
SET TITLEBAR 'D0200'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
 container_name = gc_custom_control_name
EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 others = 6.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
*----Creating ALV Grid instance
 CREATE OBJECT grid_r
 EXPORTING
 i_parent = container_r
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 others = 5.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 PERFORM get_log_data.
*----Preparing field catalog.
 PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
 PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
 CALL METHOD grid_r->set_table_for_first_display
 EXPORTING
 is_layout = layout_r
 CHANGING
 it_outtab = lt_log2[]
 it_fieldcatalog = fieldcat_r
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 ELSE.
 CALL METHOD grid_r->refresh_table_display
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
*--Exception handling
 ENDIF.
 ENDIF.
 CALL METHOD grid_r->register_edit_event
 EXPORTING
 i_event_id = cl_gui_alv_grid=>mc_evt_enter.
 CALL METHOD grid_r->register_edit_event
 EXPORTING
 i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
 DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
 i_structure_name = '/BMC_LOG'
CHANGING
 ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc ne 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
 CASE ls_fcat-fieldname.
 WHEN 'UUID'.
 ls_fcat-no_out = 'X'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'LOG_LEVEL'.
 ls_fcat-coltext = 'Meldungsart'.
 ls_fcat-outputlen = '25'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'CR_DATE'.
 ls_fcat-coltext = 'Erstellungsdatum'.
 ls_fcat-outputlen = '20'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'CR_TIME'.
 ls_fcat-no_out = 'X'.
 MODIFY pt_fieldcat FROM ls_fcat.
 WHEN 'MESSAGE'.
 ls_fcat-coltext = 'Nachricht'.
 ls_fcat-outputlen = '50'.
 MODIFY pt_fieldcat FROM ls_fcat.
 ENDCASE.
* CASE ls_fcat-value.
* WHEN '1'.
* ls_fcat-line_color = 'c100'.
* ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Log'.
ps_layout-smalltitle = 'X'.
ps_layout-info_fname = 'linecolor'.
ENDFORM.
FORM get_log_data.
if loglevlA = 'X'.
 logA = '1'.
ENDIF.
if loglevlB = 'X'.
 logB = '2'.
ENDIF.
if loglevlC = 'X'.
 logC = '3'.
ENDIF.
if loglevlD = 'X'.
 logD = '4'.
ENDIF.
if loglevlE = 'X'.
 logE = '5'.
ENDIF.
IF dateB ne 0.
 SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
 OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA and cr_date <= dateB.
ELSE.
 SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
 OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA.
ENDIF.
* and cr_date >= dateA.
 SORT lt_log_list ASCENDING.
 LOOP AT lt_log_list INTO lt_line.
 IF lt_line-log_level = '1'.
 lt_line-log_level = 'Info'.
 lt_line-linecolor = 'C100'.
 ENDIF.
 IF lt_line-log_level = '2'.
 lt_line-log_level = 'Warning'.
 lt_line-linecolor = 'C200'.
 ENDIF.
 IF lt_line-log_level = '3'.
 lt_line-log_level = 'Error'.
 lt_line-linecolor = 'C300'.
 ENDIF.
 IF lt_line-log_level = '4'.
 lt_line-log_level = 'Debug'.
 lt_line-linecolor = 'C400'.
 ENDIF.
 IF lt_line-log_level = '5'.
 lt_line-log_level = 'Trace'.
 lt_line-linecolor = 'C500'.
 ENDIF.
 APPEND lt_line TO lt_log2.
 ENDLOOP.
ENDFORM.
SELECTION-SCREEN BEGIN OF SCREEN 0100 TITLE text-001 AS WINDOW.
SELECTION-SCREEN END OF SCREEN 0100.

> change to this
>
> ps_layout-stylefname = 'LINECOLOR'.
>
> sorry ignore the above line
>
> just debug and check what is happening
>
> Message was edited by:
> Chandrasekhar Jagarlamudi
Hi,
I've changed the line to ps_layout-stylefname = 'LINECOLOR'., but then I'm getting a runtime error 'ASSIGN_TYPE_CONFLICT' in program 'SAPLSLVC in line 2975'...
I don't have any idea what is causing that.

HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID?

HI.
HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID????
GABRY =)

You need to use
data : grid1 type ref to cl_gui_alv_grid.
call method grid1->get_selected_rows
importing
et_index_rows = i_sel_alvrows[].
a®

Changing font size(bold) or color of a particular row in ALV Grid Digplay

Hi Experts ,
I am having a requirment to highlight some particular rows in ALV Grid Display . To achieve this i need to change font size or make it bold or change color of that row .
Please give me some inputs .
Thanks in Advance.
Vijyeta

Hi
Coloring An Entire Row
Coloring a row is a bit (really a bit) more complicated. , you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row.
First you have to declaration of our list data table u201Cgt_listu201D.
DATA BEGIN OF gt_list OCCURS 0 .
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA END OF gt_list .
Adding the field that will contain row color data
As you guess, you should fill the color code to this field. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field u201CINFO_FNAMEu201D of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. u201Ce.g. u2018ROWCOLORu2019
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
Try this link also:
Possible functionalities in ALV
Regards
Neha

Grey out(disable) a row in ALV grid

Hi,
I want to know how to grey out(disable) row wise in ALV grid display.
i..e.. Few rows in ALV grid display shoud be editable and few rows non editable based on certain condition.
How do we do that....Please help.
Thanks in advance.

Hi,
Since fieldcatalog is used to modify coloum and not the row, the fieldcatalog would not solve the problem.
Thankyou.

Default 10 rows in ALV grid

Hi Group,
My requirement is to show 10 default rows in ALV grid (with 4 fields in ALV grid), whenever Create radio button is selected in Selection Screen.
Please could you help me with this.
Thanks and Regards,
Kumar.

Thanks for your reply.
Sorry I forgot to mention earlier.
I have to show default 10 empty rows (editable) whenever the Create radio button is selected on the Sel Screen.
Kindly assist with this regard.
Thanks and Regards,
Kumar.

How to change the color of specific row in ALV tree

Hi,
I m using method set_table_for_first_display of a class CL_GUI_ALV_TREE.
The req is to change the color of specific row. Now can anybody tell me how to change the color of ALV tree. As in ALV tree and in this method 'set_table_for_first_display', there is no parameter IS_Layout.
Pls suggest...

hi
hope this code will help you.
Reward if help.
REPORT zsharad_test1.
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
*Populate field with color attributes
LOOP AT it_ekko INTO wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL

To have a list in a field of a row in ALV Grid

Dear Colleagues,
My question is that in an ALV Grid we have a number of rows.
Now in the row suppose i want one field as a drop down list with definite values is it possible..??
If so is there a function module to do this..??
Thanks and Regards
Varun

That was very helpful, But unfortunately that only allows only a pre defined list to be displayed....
I want a new drop down list for each record..??
Would that be possible..???
Is there any module for that...????

Hotspot click for only some rows in ALV grid for a particular column ?

Hi there,
        In ALV grid, we can make Hotspot enable for all rows in a specified column
by specifying in the fieldcatalog with Hotspot attribute set as true.
But I want to enable Hotspot only for certain rows in the particular column. I tried with MC_STYLE4_LINK , but I didnt got the required result.
So , how could I achieve that in ALV grid.
Points would be rewarded for helpful answers.
Regards,
Anil .

Hi,
You can do it for a column. Please refer to the code snippet below,
DATA : it_fcat TYPE lvc_t_fcat,
         wa_fcat LIKE LINE OF it_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
   EXPORTING
I_BUFFER_ACTIVE              =
     i_structure_name             = 'SMMW_ALERTS_ICON_S'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_BYPASSING_BUFFER           =
I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = it_fcat
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
LOOP AT it_fcat INTO wa_fcat.
IF wa_fcat-fieldname = 'STATUS'.
    wa_fcat-hotspot = 'X'.
    MODIFY it_fcat FROM wa_fcat.
    CLEAR wa_fcat.
ENDIF.
ENDLOOP.
CALL METHOD l_obj_alv_grid->set_table_for_first_display
      EXPORTING
    i_structure_name              = 'SMMW_ALERTS_ICON_S'
   CHANGING
        it_outtab                     = lt_alerts_st
        it_fieldcatalog               = it_fcat.
In the above replace the structure 'SMMW_ALERTS_ICON_S' with your structure and column 'STATUS' with your desired column.
Hope this helps,
Regards,
Vinodh

PrePositioning Scroll to a specific Row in ALV Grid

Similar Messages

Maybe you are looking for