Presentation variables in report

Hi all,
I wold like to show representation variables in report and then dashboard
It runs fine in answer but it failed in dashboard
@{pvar_promptChannel}{'Agency'}
Unresolved column: "Agency"
what is wrong?
THnak you.

Hi MuRam,
I tried @{pvar_promptChannel}{Agency}, it shows the same error Unresolved column: "Agency" in both analysis and dashboard
for @{pvar_promptChannel}{'Agency'}, actually, it works very well in analysis, but failed in dashboard.

Similar Messages

Formatting date of Presentation Variable in Report title

Hi
I have the following presentation variable, @{PR_WE_DATE}{Week End Date}, in a report title. However the date format shown in the title is different from the format in the prompt.
In the report title the date format is YYYY-MM-DD however I want to display it as DD_MM_YYYY
Can anyone let me know if it possible to format the date format for a presentation variable?
Regards
A

I've tried this and all this output to the title is 2009-12-03[DD_MM_YYYY]
Any other suggestions? Maybe I can change it when I set the variable in the prompt, did try {variable}[DD_MM_YYYY], in the prompt but it didn't work

Using presentation variables in report columns

Hi.
I need to create a report column evaluating the difference in days between a field containing a date and a presentation variable.
My field is defined as:
TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", @{DataAnalisiScaduto})
Where DataAnalisiScaduto is a presentation variable passed to the report and it's generated on a date field.
Executing the report I get an error and looking at the session manager in the generated query I can see:
TRUNC( (31 / nullif( 12, 0)) / nullif( 2010, 0) ) - TRUNC( T4292.DATA )
Why ? How can I do ?
Thanks,
Andrea

Erro again ...
the value passed is 03/02/2011 (picked from the calendar) and the default suggested is 2010-01-10
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 03/02/2011 from 03/02/2011 does not match the specified format. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Data Incasso"."Data Incasso", "Data Scadenza"."Data Scadenza Fattura", "Dettagli Pagamento"."Cd Fattura", "Dettagli Pagamento"."Cd Tipo Riga Pag", CASE WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') <= 0 THEN ''Fino 0 gg'' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') > 0 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') <= 30 THEN ''Fino 30 gg'' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') > 30 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') <= 60 THEN ''Fino 60 gg'' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') > 60 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date ''03/02/2011'') <= 90 THEN ''Fino 90 gg'' ELSE ''Oltre 90 gg'' END, Misure.Dovuto, Misure.Pagato, Misure.Scoperto FROM "Vendita - Pagamenti"')}
SQL Issued: SELECT "Data Incasso"."Data Incasso", "Data Scadenza"."Data Scadenza Fattura", "Dettagli Pagamento"."Cd Fattura", "Dettagli Pagamento"."Cd Tipo Riga Pag", CASE WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') <= 0 THEN 'Fino 0 gg' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') > 0 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') <= 30 THEN 'Fino 30 gg' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') > 30 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') <= 60 THEN 'Fino 60 gg' WHEN TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') > 60 And TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", date '03/02/2011') <= 90 THEN 'Fino 90 gg' ELSE 'Oltre 90 gg' END, Misure.Dovuto, Misure.Pagato, Misure.Scoperto FROM "Vendita - Pagamenti"

How can i display the presentation variable in my reports

Was facing a problem to display the Presentation variable on my report, however i managed to display it on answers, but when i try to display it on my Publisher report it doesnt shows any data.
I use to Select the Values From my prompt, and it shows the Reflection of Presentation Variable on my Answers Report. but i cannot see the Reflection of data on my Publisher Report Please any One Can help me with this.

Removing '' does not work it given the following error
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <@>: Syntax error [nQSError: 26012] . (HY000)"
and by adding space you mean that I use it as '@{ BbranchCode}'?
What I am doing at the moment is
1. Write the given query in oracle BI Answers.
2. Made a dashboard prompt in Answers.
3. Made a report in dashboard using the Answers report and the dashboard prompt.
Up till this step it works perfectly fine and the data displayed in manipulated on the basis of the values selected in the prompt.
4. Now what I want is to display this report in Dashboards using oracle BI publisher. For that I use the template builder provided for microsoft word.
5. I login to that add-on, open the answers report where I can see the field in the rowset. I select that field and save the template.
6. I open the oracle BI publisher and make a new reprt with data model of the answer's report and Layout of the one I just created.
7. I open the dashboard and put in the BI publisher report in the same page in which the asnwers report and the prompt was.
8. Upon changing the values of the prompt the report in the answers is still getting manipulated but I am not able to see its reflection of the BI publisher report.
The thing is that I am currently using this presentation variable to manipulate my reports in dashbords using dashboard prompts. The report is built in oracle BI Answers and it is working perfectly fine with it. Now when I use the template builder for Microsoft Word and open the template with the answers's report of this query I see the field in the row set but when I display the template in the dason the bases of this presentation variable the report in the oracle BI Answers is getting updated when I change values but when I use the template builder for microsoft word the the field is being shown in the row set.

Use of Presentation Variables in Navigated Report Title

Hi All,
It's regarding the presentation variable in report title. I have value interaction to another report based on Prompted values. But when we click on the value it will go to another report page and giving the results, but the title view is not changing as per the requested value. The title should change dynamically, but it is showing the P.Variables in place of prompted value.
Below are the ways i have used the P.Variables:
@{brand1} at @{customer}, @{sensitivity}% Sensitivity
@{brand1}{'Prod'} at @{customer}{'CVS'}, @{sensitivity}{'15'}% Sensitivity -----(default values here)
Version : OBIEE 11.1.1.5.0
Could you provide me the solution for this issue.
Thanks in Advance,

Hi,
You can use the presentation variable when you are passing the value from the prompt and filtering after
clicking on the 'GO' or 'APPLY' button. So that assigns one value and is passed in the report in the
page used.
What you need to do is you need to have the 'is prompted' for the column used in the title
or you can make the column is equal to @{pres_var}.
But still if you dont use the columns in the report and you dont want to filter the report with the title columns
then you can use narrative view with all the columns used in the title and have 'is prompted' and make its formatting similar to title view and save as a separate report
And place the narrative view above the report
Regards,
MuRam

How to pass the values to stored proc using presentation variable in OBIEE

Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There are 6 reports say ‘A’,’B’,’C’,’D’,’E’,’F’ in the same subject area.
The reports are being configured with prompts using either the repository/presentation variables.
One of the reports say ‘A’ has been configured to pass the values using presentation variables from the prompt in Advanced Tab of the report request to the stored procedure defined in the Execute Before Query section of the connection pool.
After running another report ‘B’ in the same subject area, upon visiting the report ‘A’ view display error is being seen ( Please have a look below screen shot for your reference) .
Speculate the issue is around presentation variables of report ‘A’ getting initialized even before running the report.
Appreciate your earliest advise as this is a prod issue.

Hi Prasad,
I got your note, you should not use Session variable syntax to call presentation variable.
you should use like @{AIC_PROJ_PLAT_SEQ_NO}
One more thing: first test the variable AIC_PROJ_PLAT_SEQ_NO value then try to pass to SP.
Hope this helps

Presentation Variable issue in OBIEE 11g

Hi,
I have 2 reports, report 1 and report 2
When i drill down on report 1 column 'Number of id's' will open the details report of Id's report 2
I am using a Presentation variable in report 2 filters (detail report) which is generated in Main report dasnbord prompt.
They have separate star schema.
Main report(reprot1) using Aggregated table.
Sub report(report2) using detail table.
Problem:
After upgradation from OBIEE 10.1.3.4 to OBIEE 11.1.1.5,(Unix server) The presentation variable value is not getting passed to the detail report. This is working completely fine in OBIEE 10g.
Is there any BUG in OBIEE 11g wrt presentation variable or do we want to change the configuration?
Thanks,
Satheesh

Hi,
Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
You can give it a try by doing the same and see if it works for you.
Thanks

Presentation variable data format

Hi All,
We are using date as presentation variable and using that presentation variable in reports column formula's, but in prompt date format is showing MM-DD-YYYY, but in report it is taking as YYYY-MM-DD because of this data format difference it is giving error on dashboard but working fine in report results. If we change the format of date as char and giving user input filter it is working fine but users want the prompt value as it is. So how can we change presentation variable format in column edit formula?
Tanks in advance.

Try to look into that prompt column to see why you are getting different date format.
If it is not correct as per you application then I would suggest to correct it using column->Data Format and then Save.
I would suggest to convert the filter to SQL format to handle it, you may get it after Filter... button add date and then use Advanced button. using SQL you have options to do it.
Thanks
Edited by: Srini VEERAVALLI on Apr 12, 2013 7:47 AM
What is Print Date?!! Is that available column in Subject Area? If you dont know why its like that investigate.
Edited by: Srini VEERAVALLI on Apr 12, 2013 8:10 AM

Issue in using presentation variable as filter condition in the reports

Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveen

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Report in new page does not know of session and presentation variables

I have a question about GOURL.
I am using GOURL as a column function in one report (report A), so that when i click on that column it takes me to another report(report B) that open in new popup window.
the first report (A) also uses some session and presentation variables, which is also used by Report B as filters. I am curious that if I add these filters which are using variables to report B, why can't report B get the value of these, (it just errors out ) because it didn't found any value to those variables in the filter.
Becuase I am ending up with passing all these variables in GOURL and setting them as 'isprompted'.
Does this report (B) knows nothing else than what it finds in GOURL?
thanks

In a nutshell, if u use gourl then its parameters will be only using in navigated report. This is functionality

Filtering with presentation variable in my report

Hi experts,
I'm using Essbase with Obiee 11g.
I have entity dimension like this:
Gen1, Entity
Gen2, Entity
Gen3, Entity...
Each Gen is a hierarchy.
I have a prompt in my dashboard that is a number: 1, 2, 3... with presentation variable = num
When prompt was number 3 I need to filter with Gen2, Entity.. if is number 2 with gen1, entity.. Always -1
In my report I can general filter like this: Gen@{num}, Entity and I see report OK, My requeriment is @{num}*-1* like: Gen@{num}, Entity but I have an error...
Can I do this??
Thanks!!!

You need to get the number using substring, substract it and then concat to the string "Entity"."Gen
There is another way for the same, Based on the value from prompt can validate the column to show in the report.
Try this scenario:
I've a prompt Time.Week
in the report I've picked two columns,
Column1: Time.Week--> set to isprompt
Column2: with exp
CASE WHEN Time.Week = '2012 Week01' THEN Time."Month Name" ELSE Time."Month" END
I've used existing columns to mimic your scenario
Edited by: svee on Jul 2, 2012 9:52 AM

Can I pass parameters from a dashboard via a dashboard prompt and presentation variable to publisher report based on a data model with select statements in OBIEE 11g ?

I have a publisher 11g (v 11.1.1.7) report with a single parameter. The report is based on a data model not a subject area. I created a dashboard put a dashboard prompt and link to the report in separate section on the same page. The dashboard prompt sets a presentation variable named the same as the parameter in the report.
The problem was when I created the dashboard prompt, it forced me to select a subject area which I did (though did not want to) and then I created both a column and variable prompts. But clicking on the
report link completely ignored the value that I thought would be passed in the presentation variable to the report.
Side note : My report uses a pdf template for its layout where I have mapped the columns names from my data model to the form fields on the pdf form. I noticed that if I create a publisher report based on a subject area, then I do not have the choice to choose a PDF as a template type for my layout. (I only see BI Publisher Template as a choice).
I see some documentation online that suggest it could be done in 10g.
Thanks
M. Jamal

Ok,
I just tried that and it still doesn't pass anything to the prompt.
I changed the prompt to an edit field and I made the following weblink but when i click the link from an account it doesn't put anything in the prompt and all data for all accounts is shown.
This is the URL maybe I messed something up...
https://secure-ausomx###.crmondemand.com/OnDemand/user/Dashboard?OMTHD=ShowDashboard&OMTGT=ReportIFrame&SelDashboardFrm.Dashboard Type=%2fshared%2fCompany_########_Shared_Folder%2f_portal%2f360+Report&Option=rfd&Action=Navigate&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Name%%%
thanks

Presentation Variable - Display 'All Values' in Report Title

If I create a Dashboard Prompt and then set it equal to a Presentation Variable, I then display this Presentation variable in the report title. For the Dashboard Prompt I allow them the 'All Values' choice, in fact, this is the default.
The issue is displaying this in the Report Title, when it is 'All Value' nothing is display in the title, when they select a value such as 'Region D' then it works and this value will dispaly.
I looked at the documentation and it says you can use a default value, however, setting up that still does not work. It still is blank.
Has anyone seen this issue or know of a workaround? I'd like to have something like 'All Vales' display or is there a condition I could write to set this.
Thanks

Hi Guys,
I have did the following in order to achieve your requirement:
As usual, create a request with a column prompted and a dashboard prompt containing that column and set the Presentation Variable (ex: varDept)... bla bla..
Placed them on the Dashboard to generate your issue, discussed...
Now, what I have did is:
1. Created one more Request with the column used on Prompt and specified the Formula to it as:
CASE WHEN '@{Dept}'||'A'='A' THEN 'All Departments' ELSE '@{Dept}' END
Note: Take 2 same columns (and hide one) because we are using above formula which does not contains the Column from any table.
2. Created Narrative View and referenced the above Column.. @2 (in my case).. and specify 1 in 'Rows to Display' field. Do the formatting as required viz., specifying Font size, family....
3. Place this request in between the Prompt and First Request..
Now, you can able to see 'All Departments' if 'All Choices' is selected.
Hope this idea will helps you guys..
Regards,
-Vency

How to pass Presentation Variable Value from Main Report to Detail Report

Hello,
I've 2 reports that is attached to each other. In my main report i've several report prompts and i am using i"s prompted" on my detail report to attach them.
But 2 of my report prompts are presentation variables(Names : FIRST, SECOND). Both are in date format. I've a filter in my main report like;
"ASSIGNMENTS_F"."EFFECTIVE_START_DATE" BETWEEN @{FIRST} AND {SECOND}
It works fine when i run the main report. But when i click on the numbers, i see that i can not filter my detail report with the chosen values for 2 presentation variables. It just shows all the dates.
I've tried adding both presentation variables in both reports as columns and adding 'is prompted' filter to them. But did not work either.
I just cant pass the written values for presentation variable prompts to detail report..
Please help :)

Hi,
What you can try is refer the filte condition in the main report to the detailed report with the option--> Filter based on another request.
Or you try creating another intermediate report which will refer the main report filters and pass the filters to the detailed report.
Hope this helps.
Regards
MuRam

Presentation Variables in the report column

Hi Experts,
I have one requirement like when a Dealer log-in in the Monthly report there is one date prompt[format 1995/01] now i have to create one new column that column as to filter the data based on date selected by the Dealer in the prompt
and the filter should be like this
case when
*date={selected date from prompt by the user}*
then
*{monthly sales of that particular Dealer}*
result of this column i have to use in the other column.
how i have to implement this logic can we do this by using presentation variables please let me know the syntax.
Thanks in Advance,

Write the case statement as below.
case when
date=@{Pv_Date}{1995}
then
{monthly sales of that particular Dealer}
Pv_Date is the presentation variable name.
Thanks

Presentation variables in report

Similar Messages

Maybe you are looking for