Prevent message "The Customer Requires Complete Delivery. Message No.V1293

Hi Friends,
I want to prevent the message "Customer requires cmplete delivery" Message No. V1293 from poping up for complete deliveries. I know that for complete deliveries this message will pop up but is there anyway i can prevent this message from poping up for all unconfirmed items. As it is an inconvinience for the users to click OK for every unconfirmed items and order contains more than 500 line items.
Can anyone please help.
Regards,
Wasim.

HI Wasim,
Just go to SE91 put the Message Class V1 there & in No. field 293 & go for
where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
Now with help of ABAP with just comment on these both the messages (i.e. System will ignore these) afterwards you will not face that message again in your sales order.
Hope this will helps you
Dasaradha

Similar Messages

I get unexpectedly logged out from my mail box and and recieve the following message: "The custom error module does not recognize this error."

I am repeatedly and unexpectedly logged-out from my mail box when working on a document. It frequently happens when I choose Send or Save, but it could happen any time. The file that I worked on disappears completely. Before, the file could be found in the draft box or some other place categorized as Auto Recovery. Now, instead, I get the following message: "The custom error module does not recognize this error." I am working at home, connected to a university server. The same problem appears with both of my computers, which are connected by a router. I have a MacBook Pro and am working with Firefox 6.0.2. I have a wireless broadband connection with Internet. AirPort is connected to Lindstrom and has IP address 192.168.0.198. Router: D-Link Model DIR-635. Modem: ZyXEL Model No. 660H D Triple Play Modem.
Best wishes,
Lars Lindström, Professor
<[email protected]>

Hi Phil,
Generally, when a user sends an incoming request to an Exchange 2010 Client Access server using Outlook Web App and the user’s mailbox is on an Exchange 2010 mailbox in a different Active Directory site,
Exchange 2010 determines whether the Client Access server has the
ExternalURL property set in that Active Directory site. If it is and the cross-site silent redirection has been enabled, the user will be automatically redirected to the specified URL.
Thus, please make sure the External URL property is set properly in your environment. And also
disable the WindowsAuthentication for OWA VD to have a try. If the issue persists, please try the following KB to reset the Outlook Web Access-related virtual directories:
http://support.microsoft.com/kb/941201
Thanks,
Winnie Liang
TechNet Community Support
Sorry for the late reply. Yes, the ExternalURL is set; otherwise, it wouldn't work at all. 98% of the time everything is fine.
My issue described a problem that appears only during session timeouts. I've pretty much verified that this is the case; Exchange 2010 does not appropriately handle the timeouts sometimes when using cross-site redirection.

I am getting a message the something called Completer wants to finish installing. I get this whenever I log in. What the **** is it?

I am getting a message the something called Completer wants to finish installing. I get this whenever I log in. What the **** is it?

It's adware. Click here and follow the instructions, or if they don't cover that specific type of adware, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(119897)

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

Why do I get the message "The installer requires admin priviledges to run" when trying to install from a DVD?

I am trying to install software from a DVD on my Mac Mini, When I click on the installer I get the message "The installer requires admin priviledges to run." I have admin priviledges when I look at the account info in Sytem Preferences. ANyone have an idea what to do about this?

It's a defective installer. If it needs elevated privileges to run, it should prompt for an administrator password. Since the installer is defective, you can assume that whatever it installs -- or would install, if it worked -- is also defective.

I cannot access my voice mails. I can't get to voice mail either through the phone app nor the viooice mail app. When I try I get message the "can not complete call as dialed."t Any ideas?

I cannot access my voice mails. I can't get to voice mail either through the phone app nor the viooice mail app. When I try I get message the "can not complete call as dialed."t Any ideas?

backpack12,
Voicemails are a vital part of having a working phone. We do suggest that you look at the contact and then the number to make sure that it is *86. If you are needing to get your voicemails until then, please dial *86.
RobinD_VZW
Follow us on twitter @VZWSupport

Can I use the customer requirement number as sales order in 'Goods issue MB

Can I use the customer requirement number as sales order in 'Goods issue MB1A'?
Thanks,
Tiger

Why I used the customer requirement in MB1A as the sales order, Update was terminated.
Thanks,
Tiger

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now?

Change the SMTP 550 non delivery message

Hi,
I want to change the texte of the non delivery report (SMTP code 550) send by the email appliance.
What is the simple way to do that ?
Moreover, i would like to know how long the applicance will keep the message in queue in case of my internal email server will be out of order ?
Where can i see/change this setting ?
Thanks.

You can set the 550 from the appliance, Mail Policies > Mail Flow Policies > Choose Policy Name. From there, see the DHAP section:
To answer the second part of your question...
By default, mail is queued for 72 hours (259200 seconds) OR 100 retry attempts before it bounces to the original sender.
This setting is configurable from the command line (CLI): type bounceconfig and edit the default settings. Also, you can modify this from the GUI interface by going to "Network > Bounce Profiles" and click on the Default profile.
Also, the queue could fill up if there is too much mail. However, if the system reaches its storage limit, it will soft bounce further attempts by other mail servers to deliver more messages. This ensures that no messages will get lost, as these mail servers will reattempt message delivery as well until the ESA accepts messages again.
Note: If you plan to shut down your internal mail server for maintenance for a longer period (more than a couple hours), best practice is to suspend the incoming listeners on your ESA as well (suspendlisteners). As mentioned before, in this case any connection attempts will be soft bounced, and retried later. This way, you leave the task of storing the messages to the sending mail server, which will prevent the mail queue on your email appliances filling up quickly. No messages will be lost however, once you got your internal mail server back into service, also resume the listeners on your ESA (resume), to allow delivery from remote hosts again.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Message: This customer requires a Purchase Order Number

Hi all
I need some help with above pop-up message.
The pop up appears in trcode VA02 (have no access to VA01 so cannot test it) but where in SPRO is it set up so as to link customer number to message?
Once I type the order number and press enter/return then the message appears.
I do not have access to SPRO or ABAP at this client site so I cannot check program code either.
Thanks
RM

Hi,
Check the message number and id. You will probably find this by clicking on the button with a question mark icon after the pop-up message is displayed.
Once you discover the message number and id, goto se93 give the message id and number in the respective input fields and press the display button.
Select the message and do a where used list on it. You will know in which programs this message is used and what is the condition to trigger this message.
regards,
Advait

How do I private message the customer service rep on here?

I go to the profile for the customer service rep but there is no way to send a private message..

The information is in the Community Announcements space. How To: Direct Message

Error message:The operation cannot complete because of an unknown error. [!IMP]

When I select the image it show these message box, how can i fixed it???

vicky,
You may have a corrupt file, or the list may be relevant.
Corrupt file:
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
The list:
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How PIR's are consumed by the customer requirements even though the sales orders are blocked?

Dear experts,
I am using strategy 40 for material A with Backward/Forward consumption of 60 days backward and 60 days forward.
My PIR is as follows :-
Material Month #1 Month #2 Month #3 Month #4 Month #5 ....
material A 100 100 100 100 100 ....
I created a Sales Order for material A with the quantity of 600 in Day 4 of Month #1.
After MRP run, planned order conversion and production order has been completed.
Month #1, Month #2 and Month #3 PIR's are consumed even though we made the setting in Such a way that the sales orders should just display but not planned . and the sales orders are into the blocked requirements list in the result of /n/afs/MD02.
1)but why it is consuming the PIRS?
2)is there any affect of backward and forward consumption on this?
Thanks in advance.
Regards
Bhargavi Desai

Hi,
Normally it is recommended that, not to delete PIR's one by one or remove quantity from previous periods/ requirement manually. If the PIR's of previous month is not consumed it is normally a feedback to sales people to do a analysis at their end.
In PP point of view, normally a re-organization run is carried out by MD74, MD75 or MD76. The same can be done by scheduling batch job to run on month ends basis w.r.t. period you specify.
Regards,
Narresh

Prevent message "The Customer Requires Complete Delivery. Message No.V1293

Similar Messages

Maybe you are looking for