Preverify error when netbean 4.0 build classes that import device lib

ERROR: native methods should not appear
Error preverifying class com.sprintpcs.media.Clip

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Similar Messages

  • Error when calling method INIT in class cl_hrxss_rem for salary statements

    after configuring the our hrform to work with the new ess system in ecc 6.0 we configured the hrfor decision tree to $cedt$ and pointed the form variant to the edtin feature.
    Now we are getting a class error.
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:374)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
         at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
         at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:591)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:822)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Thanks

    Hi,
    Maintain the EDTIN feature
    &CEDT$
    And UR problem solve

  • I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

    I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
    Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
    PLEASE HELP

    Ok this problem is fixed.
    Info for anyone else who faces this problem.
    Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
    11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
          Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
    After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
    Halligrimur, thank you for your help. It did lead to me solving the problem.

  • I get an error that says that LR5 encounterd a preview cach error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

    I get an error that says that LR5 encountered a preview cache error when trying to start LR5 and that it will try to fix it the next time it starts. What can I do to fix this error?

    Go to the folder with you Lightroom Catalog (usually in Pictures) and delete the folder ending in .lrpreviews
    This contains the previews for the files Lightroom has linked to. They will need to be rebuilt which can be done while working or selecting an amount you want to rebuild and accessing the rebuild command in the Library Dropdown menu...

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Error when starting DPS App Builder - Application not found

    WTF folks.
    This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
    Well, I do an update, both tools (Folio Builder and Producer Tools).
    Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
    "An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
    German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
    Any Solutions? Where to get the mysterious "App-Builder Application?"
    edit: refresh is now only possible inside the folio it seems.

    App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.

  • ARXAGMW.rdf throws BUILD_INVOICE_SELECT error when opening in Reports Builder 10.1.2.0.2

    Has anyone run across this error? "The source size of the program unit BUILD_INVOICE_SELECT is 91159 characters.  This exceeds the recommended maximum source size of 90000 characters on this platform."  I'm just opening the standard report in Reports Builder...no customizations thus far.  Wondering if this is related to the Report Builder version I'm on or not.

    Hi
    Thanks for the response. The document is good for issues with jsp reports. I am not even able to save this one as jsp till now. Not sure if there is some other way to do it.
    This is what I did:
    1. Create an excel template with 2 worksheets.
    2. Save as xml.
    3. Try to open with reports builder.
    Thats when I get the error.
    Not sure if my version problem or I am missing out on some step.
    Thx!

  • Error when i want to build a component with eclipse

    hi, i need to build a component for a software who is based on a ESB.
    It's based on webservice.
    I've made the skelleton with Fiorano software and my webservice should take something in input and put it in output .. it's only a test.
    But when I want to build it, Eclipse give me this Error.
    BUILD FAILED
    Target `module.deploy' does not exist in this project. It is used from target `deploy'.
    My XML is like this :
    <target name="deploy" depends="module.deploy">
    <service-export
    destfile="export.zip"
    servicefile="etc/ServiceDescriptor.xml"
    resourcesfile="etc/resources.properties"
    executionClass="com.fiorano.bc.bcgateway.ESBComponent"
    cpsClass="com.fiorano.bc.bcgateway.ps.ESBComponentPropertySheet"
    cpsMandatory="true">
    <fileset dir="${deploy.dir}">
    <include name="${jar.path}"/>
    </fileset>
                   <fileset dir="${deploy.dir}/${component.deploy.dir}/File_Cutter/${component.version}">
    <include name="fesb-ra.xml"/>
                        <include name="ra.xml"/>
    </fileset>
    </service-export>
    </target>
    I think than is just a setup probleme from eclips but I don't know where...
    An Id�e ?
    Thanks, Fabrice

    it would appear this person had a similar problem. maybe related?
    http://www.junlu.com/msg/42820.html
    good luck

  • Error when trying to run an application that worked when built with 8.6

    I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6.  Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009.  The error has to do with the Mean.vi.  It claims it cannot find it.  The error I get reads as follows:
    An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'.  LabVIEW load error code 3: Could not load front panel.  I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code.  Please respond as soon as possible as this will quickly start to impact my testing schedule.  Thank You.
    Solved!
    Go to Solution.

    Hi!
    The same problem ???
    I discussed it with my local NI technical support team. The application works without any problems now.
    Basic rule: when creating an installer be sure that option "Run Time Engine xxxx"  in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
    Best regards.
    Attachments:
    ADDINST.png ‏13 KB

  • Runtime error when trying to use "Discover" button to import externally managed dimensions in developer studio.

    Hi all,
    I get the following error when using "Discover" to import dimensions in endeca develoepr studio
    This application has requested the Runtime to terminate it in an unusual way.
    Has anyone else encountered this issue?

    Hi,
    Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
    Then, find "oamconsole" in the Deployments listed (on the right).
    Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
    Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
    Jim

  • Error when doing new download.  Says "Apple Mobile Device Service" failed to start.  I cannot get past this.  HELP!

    Went to install new iTunes download.  Now get an error when trying to do this.  I uninstalled iTunes completely and now is see "apple mobile device service" failed to start.  I now cannot get iTunes back on my PC.  HELP!!

    For those who updated iTunes and displaying the error "Windows error 193 or similar," a way to still use the iTunes download the 11.1.3.8 version of iTunes and install. Before installing something must be done:
    * Step 1 - Uninstall the following programs:
    1) Apple Software Update
    2) Bonjour
    3) iTunes.
    Step 2 - Install version iTunes 11.1.3.8
    If it shows the error "iTunes Library.itl" the solution is simple. Only delete the file in the C: \ Users \ Name \ Music \ iTunes called iTunes Library.itl.
    Note: When you open the older version will ask if you want to update. Do not upgrade because it will give the same error in the update.
    It is the hint. Could not say it is a solution, but a way to take advantage of the program for a while and wait for an Apple solution. Sincerely Ricardo.
    Download version iTunes 11.1.3.8 >>> version x64 (windows 64 bits) https://mega.co.nz/#!QklXGJLA!w58yHjvgYZfFy_rnGCUu4Nh6If-m4AE8OQpi2Xw5RwQ

  • BPEL build error when invoke an extrenal Web Service that returns an Array

    Hello,
    I built with JDeveloper a web service that returns an Array of Java Bean classes and I try to invoke this web service from a BPEL process. The wsdl file is automatically generated by the JDev. When I built the BPEl project I obtained the following error:
    [bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAP-ENC:Array'. It was detected that 'SOAP-ENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAP-ENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'.
    [bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAPENC:Array'. It was detected that 'SOAPENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/Top300FactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAPENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/Top300FactoryWS?WSDL'.
    [bpelc] [Error] :-1:-1: src-resolve.4.2: Error resolving component 'SOAP-ENC:Array'. It was detected that 'SOAP-ENC:Array' is in namespace 'http://schemas.xmlsoap.org/soap/encoding/', but components from this namespace are not referenceable from schema document 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'. If this is the incorrect namespace, perhaps the prefix of 'SOAP-ENC:Array' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'http://malangiu-ro:8988/cde-Project-context-root/CdeFactoryWS?WSDL'.
    Any hint? Thanks in advance!
    Regards,
    Marinel

    Hi,
    BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
    The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
    In general though, I would highly recommend this best practice:
    1) Start by define the WSDL contract first
    2) Then generate the server side skeleton to implement it
    3) Use BPEL as the client to this contract.
    By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
    2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
    Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
    Edwin

  • Error when connecting to form builder

    When I try to connect to form builder ,I get this error message ,
    ORA-12154:TNS: could not resolve service name
    What is it?

    Try connecting through SQLPLUS first and check if the connection is going through fine. Check if the service name your are trying to connect with is defined in the TNSNAMES.ORA file. If it is not present create the service name. Also mention the versions of Oracle DB and the Forms.

  • Error when open Oracle Report Builder 10g (Windows 7 Ultimate 32-bit)

    Hi all,
    I installed Oracle Developer 10g on windows 7 ultimate 32bit.
    Form builder running well, but the report got problem when i opened.
    This is the error message:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: rwbuilder.exe
    Application Version: 10.1.2.0
    Application Timestamp: 42ea43b7
    Fault Module Name: ROS.dll
    Fault Module Version: 10.1.2.0
    Fault Module Timestamp: 42c3b2b7
    Exception Code: c0000005
    Exception Offset: 0000afaa
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Can anyone help?
    Regards,
    eRie

    Hello,
    For installing Developer suite 10gR2 on windows 7 there are some special installation steps.
    Please make sure that i hava followed them as described in the metalink note:
    Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) (Doc ID 1292919.1)
    Also be aware of the following issue:
    Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 (Doc ID 1306651.1)
    Regards,
    Alex

  • Suffering an complie error when trying to compile java class in EBS11i

    Hi,
    When I trying to compile java classes with which imported the HttpServletResponse class, will get the follow error message:
    package javax.servlet does not exist
    cannot resolve symbol
    symbol : class HttpServletResponse
    It seems the javax.servlet package is not included in the classpath. But I checked the $CLASSPATH, it seems no problem.
    echo $CLASSPATH
    /u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/applvis/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/applvis/viscomn/java/appsborg2.zip:/u02/applvis/visora/8.0.6/forms60/java:/u02/applvis/viscomn/java
    Does anyone know the reason?
    environment: ebs 11i
    Thanks&Regards,
    Xiaofeng

    resolved this issue.
    1. Edit $APPL_TOP/admin/adovars.env file -
    Add the following jar files to the AF_CLASSPATH line -
    Full path of /...../iAS/Apache/Jsdk/lib/jsdk.jar
    Full path of /...../iAS/Apache/Jserv/libexec/ApacheJServ.jar
    2. Bounce the concurrent manager in order to have the changes take effect.

Maybe you are looking for