Prime 2.2 and 2960-X Edit Switchport Config all grayed out

Hi,
I have Prime 2.2 deployed and working well for our 4500X's and 2960-S's however for a pile of 2960X-24PD-L and 48-FPD-L when we go Configure -> Network Devices -> <switch> and select "Switchports" to make changes for example to the access VLAN of the port, everything on the page is grayed out.
The other 2960-S and 4500X's allow us to change, inventory and sync is completing properly - any ideas?
Rob

Hi Afroz appreciate you getting back to me so quickly, already have device pack 2.24 on the instance unfortunately.
Initially the 2960X would not display Switchports under the configuration tab however after a restart of NCS and a full sync, it did (yes I had rebooted post device pack install) however it just shows port information greyed out.
On the 3750X if you edit a gigabit switchport, some ports will show greyed out, others are editable.
It's like its read only which doesn't make sense?
Rob

Similar Messages

File, edit, layer, etc - all grayed out. why??

I'm trying to edit some photos in Photoshop CS5, and suddenly the entire bar across the top has become grayed out. I can't do anything - what happened?

If file and edit are greyed out something went terribly wrong. As that should not happen. Has your licensed expired? If not try resetting the preferences, next uninstall then reinstall next contact Adobe support so they can check their servers and make sure your license is activated and you don't have more than two computers activated.

Anyone know why I can't edit my app screen when I plug in my 3g iphone now? I can edit all the other tabs, but my app tab is all grayed out and I can't add/edit any apps now. Please help?

Just last week, I plugged in my iphone 3g into iTunes and for some reason I can't edit my apps anymore. All the other tabs (music, video, etc.) are all fine, but my apps tab/screen is all grayed out. I can't edit any of my apps now. What's the deal? I can't seem to find anything similar on the support pages, so I'm desperate to find out what the deal is...please help!

Yes, it's checked as it's how I left it when I was able to edit the page before...now the whole tab is just grayed out and I can't check or uncheck anything. Nothing happens. So frustrated...thanks for any help or suggestions. I have multiple devices on my account and this is the only one that this is happening with when I connect to iTunes. Ugh!

"Edit in Soundbooth" is grayed out. Am I out of luck?

Is there any way at all for me to use Soundbooth to edit audio in Captivate 5? I purchased the CS4 suite with Soundbooth separately from Captivate 5 and the button in the audio edit window in Captivate to edit with Soundbooth is grayed out. Am I out of luck?

Hi there
When you right-click the audio clip in the library, isn' the generic "Edit with" an option as shown below?
Click image for larger view
You then browse to whatever editing application you like and edit.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T. When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

If your phone service is disconnected, it's not your number any more.
If you "just got AT&T", how can it be disconnected?

HT4623 Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i do

Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i downgrade back to my default software?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

todaywillbegreat wrote:
''' I have tried everything but restoring my iPad to its orginal condition. What do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Help! Can't edit tags, everything is grayed out.

Hey there.
I've recently got a new laptop and my iTunes library is located on an external hard drive. When I try to edit a single song (via "Get Info") I cannot change anything, everything is grayed out. However, it allows me to change the information when I select multiple songs (strange).
I thought it might be due to "read only" files, but they files are not "read only". It says I have full reading and writing permission, I can edit the tags through WinAmp, but why can't I edit tags through iTunes?
Not all the songs are grayed out though, the songs that I've recently ripped I can edit freely in iTunes.
I'm using the latest iTunes version 7.5 and Windows Vista.

The the music folder on the external drive was created on another computer, it is possible that Vista does not regard it as yours and has not granted write permission.
Here is some help on permissions in Vista:
http://windowshelp.microsoft.com/Windows/en-US/Help/2464a180-e5dc-45d1-a2b8-3c8a 2b571e9d1033.mspx
You need to check that your account has full control rights on your music folder.
ANother possiblity although unlikely, is that your music files have somehow been made read only, you can check this by looking at the properties for a problem file.

Edit in Photoshop option grayed out ?

Hello,
Just upgraded from Lightroom V4.4 to V5. After this upgrade I find that I can no longer select the option "Edit in Photoshop", the option is grayed out and is not selectable.
I have Photoshop CS6 currently installed and don't have plans to upgrade to Photoshop CC (out of my price range).
Anyone know if Lightroom V5 only interfaces with Photoshop CC now?
Thanks!
Bill

I suggest that you try reinstalling either Lightroom or Photoshop, or even both. I have both Photoshop CS6 and Lightroom 5 installed on my computer and Lightroom and Photoshop work together as expected. Lightroom 5 does NOT just interface with Photoshop CC. It will interface with any version that you have installed.

Can't edit RAW in iPhoto - grayed out

My system recently crashed and after installing a new hard drive and reinstalling programs I find that I can no longer edit RAW pictures within iPhoto. I see both the RAW and the jpg thumbnails (I shot in both formats side by side) in iPhoto. When I click on the jpg it allows me to edit. When I click on the RAW it will not allow me to edit. I can click the Edit button but once on the crop, enhance, rotate adjust page all options are grayed out. Prior to the crash I could edit RAW in iPhoto - I want to get back to that. I can edit RAW in an external editor but want to do it in iPhoto. Using a Nikon D90. A secondary issue if you care to comment.... all thumbnails are in place when I reinstalled the program however the jpgs are only place holders. When I click on the thumbnail I get the dread exclamation mark. I have to go hunting for the file in the "Show Package Contents" command. The RAW thumbnails will allow me to explore in an external editor (see above) but I cannot edit in iPhoto. Thanks, Craig

My guess is that the two problems are related.
When I click on the thumbnail I get the dread exclamation mark.
Your Library is corrupted. That's what you need to sort out.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Options in edit global password policy grayed out

I'm trying to edit the global password policy (under users) to "be reset at first user login" but that option and several others are grayed out.

I guess you have uninstalled an older version of PS lately?
Check this Adobe TechNote for solutions (thanks Adobe, for putting it back online).
Beat Gossweiler
Switzerland

All options under File, Edit, Viw, etc. are grayed out. I'm on a Mac. AnyIdea what is causing this or what I can do about it?

I can not access anything under File Edit, View, etc. Everything is grayed out. The items under Help are black, but nothing happens when I click on Firefox Help.
== This happened ==
Not sure how often
== out of the blue.

Try to move (delete) the Firefox plist file.
See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).
You can also try to repair the disk permissions: http://thexlab.com/faqs/repairprocess.html
See also [http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X]
If that didn't help then try a reinstall.
See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Edit original, photoshop file grayed out

I am running CS5.5.
I Just started a new project. I made a title in Photoshop CS5 I imported it into my Premiere project dropped it on the time line and it works. But when I tried to Edit Original the command is grayed out.
Any ideas?
Thanks
Dennis

I have re-phrased my response to make it NOT sound like having the suite is a requirement for the 'Edit in Adobe Photshop' option to appear.
If you have Photoshop stand-alone installed you will still get that option, in most cases. It just needs to be able to see that Photoshop has been installed. However, I've run tests where I had the suite installeld, installed a later version in addition to the newer suite version, and then upon choosing 'Edit in Adobe Photoshop', the file opend in that later standalone version of PrPro because the OS had changed the affilliation to that version upon install.
I know that there are also cases where the affilitation has been inadvertently set away from Photoshop altogether. Knowing that the user has installed the suite (or both standalone prodcuts of the same version) virtually eliminates that possibility. But in this case, the user was just not seeing the menu item.
@ welchphoto... Perfectly understable mistake. I've done that too. I'm just glad it we could solve it quickly for you.

"Photo- Edit In" choices are grayed out

This morning Photoshop 2014 and 2015 were playing nicely together. I came back after dinner and now all choices in the "Photo->Edit In" menu section are grayed out and cannot be selected. I have performed a hard reboot without any change in this problem.
Does anyone have any ideas?
TIA
Bob

Bob,
I hate to ask, but just in case....
You do have an image selected. Right?
If there is nothing selected in the grid the menu choice will be grayed out.

Apple ID required for every purchase, and option to change it is always grayed out.

I just purchased a new iPod after my old one died on me. When I went to download some previously purchased apps, it asked me for my Apple ID with every download. I went to Restrictions, which were still off and saw that "Require Password" was set to "Immediatly" and could not be changed without turning on restrictions. I turned restrictions on to fix it, but while all others could be changed "Require Password" is still grayed out and can't be changed. This is driving me crazy and making the App Store near unusable. How do I change this?

Does it show a Delete Account option at the bottom of Settings > iCloud? What happens if you hit that?

Prime 2.2 and 2960-X Edit Switchport Config all grayed out

Similar Messages

Maybe you are looking for