Print out of control chart

how can i take the print out of the control chart and also the necessary data like Cp Cpk values.
My exact requiremnt is, i want X-bar chart, R chart, all statistical values and also the results recorded of that characteristics on 1 page.
How is it possible?
Message was edited by:
        sandip raut
Message was edited by:
        sandip raut
Message was edited by:
        sandip raut

Hi,
you can use the t.code for OPK8-DEFINE PRINT CONTROL
(SPRO> PRODUCTION> SHOP FLOOR CONTROL --> INTEGRATION --> DEFINE PRINT CONTROL.
This is your mentioned requirement matched. pls check with this t.codeOPK8.
Regards,
Mohan R

Similar Messages

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

Print out of Gantt Chart

While using the menubar path Project> Print> All/Gantt Chart in the Project Planning Board screen of a Project, the print preview showing the display area only. The table area is showing without the text and data. Please tell me what type of settings to be done for this problem.

Hi Mohanty,
Plz check.
Project planning boardu2026u2026..projectu2026..printu2026..All/Gantt.
Here if u are not able to see the valuesu2026.Text.
Clicku2026.Page setupu2026.optionsu2026.see the columns have u given zerou2026u2026make it as 20.
I hope it will solve.
Regards
Chandra

How can I print out the graph I need only, without the controls and indicators?

I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

Hi Fenny,
you should use the report generation functions to create a report containing your graph image and print it.
Take a look at the Sample Test Report.vi you find in the report examples of LV.
Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
Let me know if you need more help,
Alberto

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

How do I save and re-use a fillable form once I have created it? It is a form i will use for multiple medcial clients I see, then print out and put in paper chart, and then do it again for another patient. - I just got Acrobat XI

I've created a fillable form from a Word document, but how do I save and re-use a a fillable form once I have created it? It is a form I will use for multiple medical patients, printing out the filled in form to put in paper chart (no need to save filled out form), and then fill blank form again for another patient? - I just got acrobat X

Thanks!
That should also save the blank form for future re-use, right.?
Can I also file the blank form in the file system, and then retrieve it as a blank form when I have a next patient need for it?
Thanks
Michael

Print out a page with a all controls

Hello
Is it possible to print out all the controls on a page.
I meam all together with one function?
Thanks
Phil1

I assume you're asking how do you print an MFC dialog with all of its controls. Is that correct? If so, try adding a method to your dialog class with this code:
CPrintDialog printDlg(FALSE);
if (printDlg.DoModal() != IDOK)
return;
DOCINFO documentInfo;
::ZeroMemory(&documentInfo, sizeof(documentInfo));
documentInfo.cbSize = sizeof(documentInfo);
documentInfo.lpszDocName = _T("Dialog Document");
HDC hdcPrinter = printDlg.GetPrinterDC();
CDC printerDC;
printerDC.Attach(hdcPrinter);
printerDC.StartDoc(&documentInfo);
printerDC.StartPage();
HDC hdcScreen = ::GetDC(NULL);
CDC screenDC;
screenDC.Attach(hdcScreen);
long screenPpiX = ::GetDeviceCaps(hdcScreen, LOGPIXELSX)
long screenPpiY = ::GetDeviceCaps(hdcScreen, LOGPIXELSY);
long printerPpiX = ::GetDeviceCaps(hdcPrinter, LOGPIXELSX);
long printerPpiY = ::GetDeviceCaps(hdcPrinter, LOGPIXELSY);
long xRatio = printerPpiX / screenPpiX;
long yRatio = printerPpiY / screenPpiY;
CRect windowRect;
GetWindowRect(&windowRect);
CRect targetRect = windowRect;
targetRect.right = targetRect.left + (targetRect.Width() * xRatio);
targetRect.bottom = targetRect.top + (targetRect.Height() * yRatio);
targetRect.OffsetRect(
-targetRect.left + (targetRect.left * xRatio),
-targetRect.top + (targetRect.top * yRatio)
CDC* dialogDC = GetDC();
printerDC.StretchBlt(
0,
0,
targetRect.Width(),
targetRect.Height(),
dialogDC,
0,
0,
windowRect.Width(),
windowRect.Height(),
SRCCOPY
ReleaseDC(dialogDC);
screenDC.Detach();
p
rinterDC.EndPage();
printerDC.EndDoc();
printerDC.Detach();
This isn't perfect, but hopefully it can get you started.
- Elton

How to control print-out in GI Slip based on storage location

Hi Experts,
Presently my smartform - GI Slip is giving print out for each line item. But the requirement is: no. of print out will depend on no. of storage location, independent of line item. Since GI Slip is a collective slip hence its showing same details for each line item. The print out are first taken from MB1A and then MB90 is for reprocessing.
How can I control the no. of printouts based on storage location
Please help me in this issue...
Thanks in Advance...
Pinki.

You have to modify your driver program,
Ex: Loop at < internal table>
AT NEW <storage location>
<New-page>
End at.
End loop.
The above syntax will help you to close the issue.
Rgds,
SR

Parental Controls, Print out Log

Hello,
I do various mac tech support/advice for several elementary school teachers.
One has asked it I can print out the website use log in the 10.5 Parental Controls for one of her student's accounts. I was wondering if there is a good way print it, short of using the apache2 log files in the Console.
I hope I'm just not missing something obvious.
Thank you
Message was edited by: Jeremy Dorn

I understand all of that. But in my case, it's my kids' accounts. They don't do any "important sfuff" that would be lost if they were force logged out. All they do is use a web browser to play flash-based online games and watch YouTube videos. They often just let their time run out instead of logging out, and their broswers then continue to use up to 90% of CPU and continue to use enormous amounts of internet bandwidth "displaying" the Flash crud, which slows down everything for everyone else who uses the computer.
Firing up Activity Monitor and force logging them out gets tiring. A way to have their accounts force logged out at the end of their time, instead of just being bumped to the login window, would be a godsend.

Out put control for invoice printing

Hi Friends,
Iam Facing one problem realted to Out put control..
I created one smart form for Invoice. Its working fine. But before giving the invoice print we have to create Exise . So without Exise Number no output should come..
So if Exise number is initial.. it should not trigger the output type...
for this one.. How can i restrict?Can i restrct in smart form driver program..
if possible .. can i write any routine..in routine what i have to include..
please help me..
if possible ..please send me the code..
Thanks in Advance,
sampath

check table J_1IEXCHDR with ur Invoice number.
in ur driver program u have to put a condition like this .
read table J_1IEXCHDR with invoice .
if sy-subrc ne 0.
print .
endif.
Regards
Peram

When I print out Yahoo! Finance web page, the interactive chart (Flash Player 10) part is printed blank. Internet Explorer can print the same page, no problem. How can I print it correctly?

I cannot print out Flash Player 10's interactive chart in FireFox.
IE can print the same page.
http://finance.yahoo.com/echarts?s=C+Interactive#chart1:symbol=c;range=5y;indicator=volume;charttype=line;crosshair=on;ohlcvalues=0;logscale=on;source=undefined
My boss told me that he doesn't like Microsoft, so I must find a solution.

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

SD Material determination - copy control - print out

Hi Experts,
I'm using material determination for inquiries (AF). In that material determionation it's defined that substitute products will be displayed for selection and the original entered material number will be used for print out.
When I'm creating an offer with reference to that inquiry, I can see the substitute material no. as defined in material determination. But this number is also used for print out, which does't match to the material determanation definition (the original entered material number should have been printed)
The same appears when I'm creating the order with reference to the offer.
Can someone tell me where and why I'm loosing the connection to the material determination?
Thanks
Anja

HI Anja,
check with "substitution reason" in OVRQ
entry coloum and outcome coloum
maintain according to your requirement.
Regards,
Krishna.

How to control the print out

Hai
I create the scrip program I want to get only one print out in each document number. After that I want to restrict that print out that each document number how I should do it. Ex: I got the print out doc no. 00111 at once after that never gives the print out if I click print commandI want to restrict only one print out (I create the Z-table and I want to pass flag when I press print command but I dont knw how to do it if I get the solution for that my problem wil solve)
Regard
nawa

Hi,
try this..
data: v_docno like ztable-docno.
select docno from ztable
                    into v_docno
                    where docno eq <curr doc no> and "u should provide current doc no here
                              printed eq 'X'.                     " suppose 'printed' is the flag field name
if sy-subrc NE 0. "i.e if form is not printed for this doc no, then print form
call function open_form
call function write_form.
call function close_form.
elseif.
message e001(zmsg).   "message: form already printed for this doc no.
endif.
regards,
Ravi

Spc control chart not showing UCL CL or LCL

Hi people,
I have an spc control chart within my app. However for some reason the UCL, CL and LCL aren't showing on my graph.
A brief background:
This is an app for people entering measurement data into several numberboxes the average of which goes onto the graph. These numbers generally vary from 32.0 to 28.0
The UCL is at 30.6 the CL at 30 and LCL 29.4 However none of these values are showing on the graph.
Has anyone used this control and know why I am having a problem here?
Rik
That glass?
Thats glass is neither half full or half empty....
Its twice the size it needs to be
Solved!
Go to Solution.

Hi Henrik,
Thanks for the contribution however this didn't seem to work. It may be worth noting that I am not using a waveform chart and instead am using a "control chart" which is included in the SPC package.
If I could work out how I would include a picture of my current code however print screen seems to have stopped working (odd eh?)
Basically I have an array going into X and another array going into Y
There is a control which is generated by the control chart called control chart lines. I have hooked up my limits to this.
I can find very little documentation on this control and so have hit a bit of a wall
Vielen Dank für Ihre Zeit
Rik
That glass?
Thats glass is neither half full or half empty....
Its twice the size it needs to be

New Ink Cartridge but can not print out/copy any document.

I have HP Printer Deskjet 1050. I've just bought 1 x Original HP Ink Cartridge Colour Black No.61 that can be used as well for my HP Deskjet 1050 (because I could't get No.802 Black Cartridge). I have pulled out the empty one and pushed the new one in until I heard snap sound (I've followed as what is in the instruction poster). Before my old Ink was empty, I was able to print either black or colour. Now, after I've got new one pushed in, I couldn't print nothing, even the alignment page doesn't automatically print out after all cartridges are pushed in and cartridge door was closed. My Black Ink warning light is blinking all the time. I can scan to my computer/laptop but can not print it out or make copy from the printer. This printer is not compatible for my laptop with OS Windows 8.1 (64-bit), but I was able to use my printer for printing thru my laptop by using HP AiO Printer Remote. Please help?

Hi @KroebY,
Welcome to the HP support Forums! I see you have replaced the black cartridge on your HP Deskjet 1010, but it is not registering the new cartridge. You are unable to copy or print, you can make a scan. I notice you said your DJ 1010 was not compatible with the Windows 8.1 Operating system, there are full feature software and drivers available for your printer.
Let's start troubleshooting the print quality issues: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
Does this help, are you now able to print and make a copy? If yes, continue below:
Now, the software:
1. Unplug the USB if using a direct connection.
2. Remove the HP DJ 1010 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the DJ 1010 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your DJ 1010 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-117518-4&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if you are not able to print, and if the installation was successful. I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Print out of control chart

Similar Messages

Maybe you are looking for