Printing information (date+time) of an order

Hi experts,
Do you know where printing information (date + time) of an order is stored?
Does SAP store also a re-printing information?
Via configuration OIOE, it triggers the printing information in table JCDS , but in case of re-printing, SAP does not seem to store that information.
Any suggestion?
Thanks
P.

Hi,
Several suggestions to find the replied date & time:
1. We can find related emails in Outlook, then find the replied date & time from the related emails:
Right click on the message in the list, Select "Find Related" -> "Messages in This Conversation" from the menu that comes up.
2. View tab -> Conversations -> check "Show as conversations", then we can easily find other emails in the conversation, then find the replied date & time.
Anyway, both methods above are manual and based on your request description, I don't think the whole process can be performed with the build-in feature automatically. However, the whole process may be realized via VBA, if you can accept a VBA method, I suggest
you post the detailed request in Outlook for Developers forum:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=outlookdev
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Printing emails date/time in headings

How do I adjust the header : left, middle, right etc to select date/time that is the same as that of the message on sending msgs.
Cannot find the list of format controls for such when in print preview, print, options (say centre),, custom, format controls etc.
I do NOT want today's date/time only e.g., when the message was sent or received (i.e., local date/time).
The only way I have found so far is to print the message source which can be a bit long.
Using Thunderbird 24.4 under Linux with Mageia v4 distro (all fixpacks etc).

The date offered is the date time printed. You do not get the option to modify which date and time is used. If you feel it is not correct, simply remove it.

Trying to print the date arrays in reverse order....

Hi,
I'm trying to print the dates in the arrays in reverse order using the for loop, but its not working and i think ive got something in the wrong order perhaps the constructor or method. Or do i need to define 'a', because i tried it and i couldn't unless, probably because i was putting the wrong code for it.
Thanks for your help
public class Array
public static void main(String[] args)
          a[0] = new Date(2, " January ", 2005)
          a[1] = new Date(3, " February ", 2005)
          a[2] = new Date(21, " March ", 2005)
          a[3] = new Date(28, " April ", 2005)
                               printDate();
class Date
public int day;
public String month;
public int year;
public Date(int d, String m, int y)
    day = d;
    month = m;
    year = y;
public void printDate()
for (int i = a.length - 1; i >= 0; i--)
              System.out.println(a);

I don't see where this 'a' variable is declared anywhere, so what did you expect it to do? Also, you can't just call Date's printDate method from your Array class like that. You really need to start with the java tutorials or take a course. The forums aren't going to effectively teach you the very basics.

HELP - no date/time and clip order is weird

Hello,
I have a feeling I have seen people with the same problem as I have now but I haven't found a good answer on what to do. First of all, after having capture my clips into Premiere CS3, the date/time of the clips are obviously not in the app - can't find them anywhere so a workaround is to use paper and pen and look at the timestamp of the camera when a shot was taken. Not so good. It is weird that I can't make this date/time marking of clips work - even KISS apps like WMM does this very easily. Anybody?
But last time I run into a tricker problem. After capture I had a greater number of clips, and now I can't sort them in any sensible order. Maybe they were initally sorted chronologically but after having reordered for some other reason the chronological order seems impossible to revert to.
Also the automatic clip naming seem to be of no help:
Untitled Clip 01 01 9
Untitled Clip 01 01 10
Untitled Clip 01 01 11
Untitled Clip 01 01 12
Untitled Clip 01 02 7
Untitled Clip 01 02 8
Untitled Clip 01 02 9
Untitled Clip 01 02 10
Untitled Clip 01 03 4
Untitled Clip 01 02 5
seems to have the cronological order
Untitled Clip 01 01 9
Untitled Clip 01 02 7
Untitled Clip 01 03 4
Untitled Clip 01 01 10
Untitled Clip 01 02 8
Untitled Clip 01 02 5
etc
Anybody who can give me some advice about this. This is very time consuming and annoying...
Thanks
/D

Sorting by media start assumes all on the same tape and only one tape per bin. Might not be the case always, especially if you want to match up shots from several cameras using datacode. That's why I use Scenalyzer to put date/time in the filename.
Adobe didn't mention displaying datacode in their spec, so it shouldn't really be too much of a surprise to find it isn't included.
Since I don't use PPro's capture, I don't know the subtleties of the results of opting to split capture files into scenes. Does that give any hints in filename or logging etc?
If you want extra datacode facilities in CS5 (gossip says CS4 is beyond the new feature stage), then best submit a request via
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Use files based on a date/time stamp in order

I have a PL/SQL procedure that is using BFILE to pick-up and read a file. The file will have the same starting characters for every file followed by a date/time stamp: AAAA_09232009
I need my procedure to use the file with the oldest date first and then rename the file after the procedure has run through it. Can anyone assist me in this? Below is the beginning of the procedure --Thanx in Advance:
create or replace PROCEDURE XML_READ_FILE
as
v_bfile BFILE := BFILENAME('XML_DIR', 'AAAA_09232009.xml');
v_clob CLOB;
BEGIN
DBMS_LOB.createtemporary(v_clob, TRUE);
DBMS_LOB.OPEN(v_bfile, DBMS_LOB.lob_readonly);
DBMS_LOB.loadfromfile(v_clob, v_bfile, DBMS_LOB.lobmaxsize);

See if this helps:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584

How can I print the DATE in the Header/Footer but NOT the TIME?

I know how use page set-up to change the headers and footers. Firefox doesn't give me the choice of printing just the DATE rather than the DATE/TIME. I tried Custom Date and it printed "Date", and not the date. I tried &Date and it print the Date & Time.
Is there a way to print just the date?
Sign me
Midnight Printer

You want to print them on their own? Can't be done. WIth the photo? Install this
http://www.iborderfx.com/iborderfx/

Printing current date and time on each page

I'm often printing several versions of a document (e.g. a paper in progress). To keep track of the printouts I would like to print the date and time of printing onto each page, regardless of which application I'm using (although it would be okay if it works for PDF files only, if it happens automatically). I have seen Windows printer drivers including this feature, but haven't found any settings here (e.g., Canon iR3225) nor any hidden-CUPS-feature-I-could-activate-in-the-config-file.
Any ideas? Some sort of preprocessing I could inject into cups?

I agree with Greg. I had a quick look through the cups settings and could not see what you want. The closest thing would be a cover page, which you can also do via the standard print dialog.
And checking the iR32xx series printer driver on Windows 7, there is no feature to print the date/time within the driver. So as Greg has mentioned your reference to Windows having this feature must be via an application rather than a driver setting.

Printing Date & Time

Is there any way to print the Date & Time all items printed no matter what the application is?
Or is there a third party program that would let me do this?
Thanks in advance

What's the easiest way to print the current date and
time (as a string)?System.out.println( new java.util.Date() );

Time Machine - Date & Time format problem

I'm sorry if this has been mentioned elsewhere, but I was unable to find it. Following a change I made to the Date & Time prefs in order for the complete date to show in the menu bar I am now unable to determine the time a backup was made or anything else for that matter.
I made the modification via the International Preferences - Formats pane, but this did not display as I wanted and I have since gone back to how it was originally or so I thought! Now all the time stamps are showing as a five or six digit number. Does anyone know have to change this back!
thanks
littlebad

littlebad wrote:
I'm sorry if this has been mentioned elsewhere, but I was unable to find it. Following a change I made to the Date & Time prefs in order for the complete date to show in the menu bar I am now unable to determine the time a backup was made or anything else for that matter.
I made the modification via the International Preferences - Formats pane, but this did not display as I wanted and I have since gone back to how it was originally or so I thought! Now all the time stamps are showing as a five or six digit number. Does anyone know have to change this back!
Hi, and welcome to the forums.
Do you mean in the TM Interface +(Enter Time Machine)?+
If so, try turning TM off, selecting the "none" drive, quitting System Preferences, then going back and re-selecting the drive.
If that doesn't work, try a "full reset:"
Turn TM Off, de-select the drive, note any exclusions in Options, quit System Preferences.
Delete the file /Library/Preferences/com.apple.TimeMachine.plist (in your top-level Library folder, not your home folder).
Re-select your drive (and re-enter any exclusions).
Do a +Back Up Now+ or wait for the next scheduled backup.

How to print date & time stamp on photos?

How to print date & time stamp on photos?

Three methods:
File>process multiple files>labels. Be sure to uncheck "same as source", or the originals will be overwritten. It is best to work on duplicate files, esp. while learning.
Use the horizontal or vertical type tool to add the information manually to each picture file
If the same information is to be applied to several pictures, e.g. a copyright notice, use of a brush made in PSE is very efficient

Add Curent Date & Time to PDF when Printed

This is my first post so please excuse any ignorance.
Basically we are in the process of creating electronic copies of SOP’s and putting them on our file server for all staff to access. Due to regulations, when these SOP’s are printed they would need to have the current date and time in which the SOP was printed, ideally like a watermark faded diagonally across the page but even if it was something on the bottom or top this would also do the trick.
It should read "Only Valid on Date of Printing - <Current Date><Current Time>
Could somebody please tell me if something like this is possible by incorporating JavaScript into the PDF.
Any assistance I would be grateful.
Thanks.
Keith.

GKaiseril
Thank you so much, I got it and it worked perfect courtesy of "hardDriver2". For anybody else who is looking to do this see below.
// Description: This script adds a text field to the left side of all
// pages. It also sets a doc level JavaScript that executes when the
// document is printed and fills the field with date.
// Add field to each page of form
var inch = 72;
for (var p = 0; p < this.numPages; p++) {
    // create rectangle quads for field
    var aRect = this.getPageBox( {nPage: p} );
    aRect[0] = 0.0;
    aRect[1] = 0.0;
    aRect[2] = 26.0;
    aRect[3] = 792;
    // now construct text field to fill with date information
    var f = this.addField("PrintField", "text", p, aRect )
    f.delay = true;
    f.textSize = 16;
    f.textFont = font.HelvB;
    f.textColor = color.black;
    f.alignment = "center";
    f.readonly = true;
    f.print = true;
    f.hidden = true;
    f.delay = false;
for (var p = 0; p < this.numPages; p++) {
    // rotate the text
    var f = this.getField("PrintField." + p)
    f.rotation = 90;
// Adds a doc level script to populate text field when doc prints from
// Acrobat or the free Adobe Reader. Note: the '\r' character represents a
// carriage return.
var myWillPrintScript = 'var f = this.getField("PrintField"); \r' + 'f.hidden = false; \r' + 'var d = new Date(); \r' + 'var year = d.getYear()+1900; \r' + 'f.value = "THIS DOCUMENT ONLY EFFECTIVE ON " + (d.getMonth()+1) + "/" + d.getDate() + "/" + year; \r'
var myDidPrintScript = 'var f = this.getField("PrintField"); \r'
                           + 'f.value = ""; \r'
                           + 'f.hidden = true; \r'
// Now set the scripts to execute on the Will/Did Print events.
this.setAction("WillPrint", myWillPrintScript);
this.setAction("DidPrint", myDidPrintScript);

Each time I print, a data page of the print job is printed out.

Each time I print a data page of the print job is printed out. How can I Disable as it is a waste of paper?

Hello john42gd,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
OS X Mavericks: Change or update printer software
http://support.apple.com/kb/PH13761
Have a nice day,
Mario

CDHDR date/time fields vs. changenr field - what's the proper order ?

I have an application where I need to keep track of all the changes on sales orders. Got it working pretty well, but in production it has the nasty habit of missing some changes ( it runs every 15 minutes and keeps track of the last date/time of an item it picked up ). What's worse is that if I do a full run from scratch, the missing stuff appears.
I think my algolrithim is flawed because of the missing things plus I found two entries who's entries look like the following (all in VERKBELEG) - yes, this is REAL data from my production system:
changenr          udate     utime
0004520883     2/27/2007     19:20:24
0004522894     2/27/2007     19:16:31
Apologies for the formatting - anyways, as you can see - which entry happened first? Is the changenr field the authority on that or is the date/time fields ? I have to think it's changenr because of the following:
1 - changenr is part of the primary key - date and/or time is not
2 - my program is missing changes
What's even wierder is that the above two changes were made by the same person - and I have no idea which one they did first.
bottom line - what determines order of changes ? - field changenr or date/time fields (which are udate and utime respectively). I thought when I designed this the first time that it would been entry #2 above, but now I'm thinking it's entry #1.

Tom;
Thank you very much for the information - I did run transaction SNRO and I see on my dev box that it's buffered ( 10 numbers ). This then leads to my next set of questions:
1 - If you have multiple app servers and it's bufferered, where does it buffer ?
2 - Are the change numbers still in order of the changes ( see #4 below ) ?
3 - When a change number is buffered - does that mean the entire change is buffered or does that mean that only the number is buffered ?
4 - If you have multiple app servers with multiple changes - do the changes appear in the database in order of the change numbers or out of order ? Here's a simple example:
    change 1 - done by app server 1
    change 2 - done by app server 2
    change 3 - done by app server 1
    change 4 - done by app server 1
    change 5 - done by app server 2
At any point, would I see any change number in the database which has a higher change number than one that doesn't yet exist in a commited form in the database ? In order words, if I did the read just right, would I see changes 1,3,4 on one read and then 15 minutes later 1,2,3,4,5 ? The reason I'm asking is because if you want to remember where you last left off, if a change number "appears" later and not in order, tracking the change numbers won't help either.

PURCHASE PROGRAM When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month. Does not this offer? M

PURCHASE PROGRAM
When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.
Does not this offer?
Micke at Raa

Some general information... your Adobe account and your credit card details must match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-verify email https://forums.adobe.com/thread/1446019

Print PDF document with printer's name and date/time of print

Hi,
I'm pretty new to this...
I have a PDF document and when I print it, I want the printer's name and the date/time of print to be showed on the printer's output.
I have several printers (some local and some on network) and don't necessarly use the default one. I would like the name of the printer used, to be printed on the document.
With var h = this.getField("Printer"); h.value = app.printerNames; I'm able to get the list of all printers available but I just need the one used.
For the date/time, using var f = this.getField("Today"); f.value = util.printd("mmm/d/yyyy", new Date()); gives me the date/time of when the document is open, not when the document is printed. (or maybe I'm missing something?)
I guess the date/time issue is not the major one as there is usually not much difference between the time you open the document and the time you print it.
I'm more interested in the printer's name.
I use Acrobat Pro 9 to edit my PDF document.
Can anyone help me please?
Thanks!

This project was left aside for a while... but it's now finished!
Thank you for the answers. It was helpful.
Here is a step-by-step of what I did (using Adobe Acrobat 9.5.1):
Open PDF document in Acrobat
Select Forms -> Add or Edit Fields
Add two text fields: one called "Today" for the date and one called "Printer" for the printer name
Close the form editing
Select Advanced -> Document Processing -> Set Document Actions...
Then select Document Will Print and Edit
Paste the following code:
var f = this.getField("Today"); f.value = util.printd("dd mmm yyyy - HH:MM", new Date());
var pp = this.getPrintParams();
this.getField("Printer").value = pp.printerName;
Save your PDF
Enjoy!
The date and printer name field will be automatically updated when you print the document!

Printing information (date+time) of an order

Similar Messages

Maybe you are looking for