Printing last page (Purchase order Terms) in SMARTFORMS
Dear SAP Gurus,
Our Purchasing unit would like to print purchase order terms and conditions after the end of Purchase order. Initially I had two pages (First and Next). The following are the steps I followed to print last page with Purcahsing terms.
1. Create Command line at end of Main window in First and Next page and in command line output options select Go to page as Last page.
2. Under last page, I have a secondary window which prints a text. (this is a long text and cant be printed using secondary window. I need Main window to print the text as it would be continous)
The following are the problems I am facing.
1. By placing command line at end of Main window, data in secondary window after the Main window are not printing.
2. Purchase terms Text placed in the last page under Main window is not printing. Text placed in last page under secondary window is printing but instead of 8 pages of terms text only one page is printing.
How can I handle this.
Thanks in advance.
Thanks
Shanthi
Hi Shanti,
From what I've understood from you post, you may try putting the command in the secondary window (which comes after the MAIN Window) of the first page. In the command give Goto Page ->NEXT.
Hope this helps.
Thanks,
Ranjith
Similar Messages
-
How to print last page in smartforms
Hi,
In my smartform i have 3 pages (FIRST, NEXT & LAST). FIRST contains some header detail and items. NEXT contains rest of items and this page would be repeatable if more item comes. now after NEXT i want to print LAST page. How to achieve this. PLease let me know. I looked into forum but haven't get exact answer so far.
RgdsHello,
According to your scenario you are having 4 orders and each order has to print seperately with the last page .right?
The best soln would be,
1) create another internal table same as the one you have and delete adjacent duplicates using order, so you will have 2 internal table one with 4 orders (it-1)and other with all the items(it-2).
2) In the driver program ,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
control-no_open = 'X'.
control-no_close = 'X'.
output-tdnewid = 'X'.
PERFORM ssf_open.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
ARCHIVE_PARAMETERS =
user_settings = ' '
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJ =
output_options = output
control_parameters = control
IMPORTING
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it-1.
CALL FUNCTION l_fm_name
endloop.
CALL FUNCTION 'SSF_CLOSE'.
2) In the smartform
FIRST -> next page -> NEXT
Beneath the main window -> Table, put Command - Goto new page as LAST.
NEXT -> next page -> NEXT
LAST -> Next page -> Blank
I hope this will work as I have done a similiar dev.
Regards,
Radhakrishnan -
Purchase order layout using Smartform
Hi All,
Can anyone let me know how to create Purchase order layout using smartforms and assigning it to output type.
Is there standard smartform for purchase order?http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.sap-basis-abap.com/sapsf001.htm
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.esnips.com/doc/13b7ae7a-b32c-4b96-b588-881859d4ac99/Template,Table,Loop,Command-in-Smartforms.doc
http://www.esnips.com/doc/97acb00a-e513-4611-91f0-c626f460bfc5/Smart_Form_Overview.pdf
http://www.esnips.com/doc/77a981b9-8fe3-4fbb-8101-67745c1fe60c/SMART-FORMS_shail.ppt
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Try this. A simple sample Smart Form.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SMARTFORMS GENERATION: (calling internal table fields)
 Open a smartform using the tcode smartforms.
 Usually form attributes shows admn data.
 In the form interface declare import/export parameters if any. Else declare the tables in tables tab button.
 In the windows and pages expand and create a table. It automatically generates header, main area and footer for the table.
 In data tab button in the table we usually declare a work area to bring the data from se38. Like: ktab into wa. ( The purpose of declaring the wa is , to get the data of the ktab in to header from the body area of the internal table).
 And in the tablepainter pushbutton in table we can have any no of line types. Depending on the requirement. ( for ex: If we want to devide a row in to 4 columns, we can devide it as 4,4,4,4cm as line type 1, And usually for the footer we dont need no of columns, So, we declare it as one column with 16cm measure with the name line type 2.). We can use these line types in the tables.
 In the header right click>>create>>tableline. It asks for line type. Select one line type which is appropriate.
 Like same create a row2 in main area using right click. If we select the line type 1, it automatically generates 4 cells. We can create text in each cell as per requirement.
 We can generate general attributes using general attributes tab button in the text. Or in the other way. We can switch on the field list on/off button from the application tool bar. It displays all the attributes in the left down corner of the screen. We can drag and drop the required fields in the general attributes tab button of the text.
 We continue the same procedure for all the texts. The texts should be displayed in the gray color. Then only it can collects the data from the abap editor fields.
 If it wont turns gray, we can check the fields in the editor by changing it to the line editor. The best thing is to drag the fields from the list, rather than declaring like &wa-matnr&
 In the footer also we create a line type and in that table line we create text.
SE38 PROGRAM(method I):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
data: FM_NAME TYPE RS38L_FNAM.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in
S_MATNR.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_MYFIRST_FORM2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IN THE OTHER WAY(method II):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in S_MATNR.
CALL FUNCTION '/1BCDWB/SF00000199'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the method I we are calling the amartform dynamically using the function module 'SSF_FUNCTION_MODULE_NAME'.
Here we are exporting form name and importing fm_name.
So we need to declare the variable fm_name as
data: FM_NAME TYPE RS38L_FNAM.
We can have the type of the fm_name in the function module 'SSF_FUNCTION_MODULE_NAME' (in the export tab button).
Since we are passin the name of the Function module generated by the smart form in to the fm_name variable. We run the function module with the name fm_name, but not the FM generated by the smartform(like /1BCDWB/SF00000199)¬¬¬¬¬¬.
In the method II we directly call the smartform generated function module (i.e, /1BCDWB/SF00000199).
But the method I is recommended. In the method I, The fm_name is a variable we dont put it in the quotes while calling.
In the both methods we declare the internal table using the like option, but not begin of . end of. And in select statement we select *, But not individual fields.
EX2:
SMART FORM NAME: ZGITI_FORM1.
SE38:
REPORT Z_CALL_GIRI_FORM1 .
TABLES: VBRK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
*INITIALIZATION.
*T1 = 'SELECTION-CRIETERIA'.
DATA: BEGIN OF I_INVOICE OCCURS 1.
INCLUDE STRUCTURE ZSTR_INVOICE.
DATA: END OF I_INVOICE.
DATA: VAR1 LIKE VBRP-NETWR.
DATA: BEGIN OF I_ADDRESS OCCURS 1.
INCLUDE STRUCTURE ZSTR_ADDRESS.
DATA: END OF I_ADDRESS.
DATA: BEGIN OF I_ORDER OCCURS 1.
INCLUDE STRUCTURE ZSTR_ORDER.
DATA: END OF I_ORDER.
DATA: BEGIN OF I_ITEM OCCURS 1.
INCLUDE STRUCTURE ZSTR_ITEM.
DATA: END OF I_ITEM.
DATA: BEGIN OF I_VBFA OCCURS 1,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
END OF I_VBFA.
SELECT KUNAG VBELN VKORG VTWEG SPART FROM VBRK INTO TABLE I_INVOICE
WHERE VBELN IN S_VBELN.
IF I_INVOICE[] IS NOT INITIAL.
SELECT KUNNR LAND1 NAME1 NAME2 ORT01 PSTLZ REGIO FROM
KNA1 INTO CORRESPONDING FIELDS OF TABLE I_ADDRESS FOR ALL ENTRIES IN
I_INVOICE WHERE KUNNR = I_INVOICE-KUNAG.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT VBELV VBELN FROM VBFA INTO TABLE I_VBFA FOR ALL ENTRIES IN
I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
IF I_VBFA[] IS NOT INITIAL.
SELECT VBELN BSTNK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE I_ORDER
FOR ALL ENTRIES IN I_VBFA WHERE VBELN = I_VBFA-VBELV.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE I_ITEM FOR ALL
ENTRIES IN I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
LOOP AT I_ITEM.
AT LAST.
SUM.
VAR1 = I_ITEM-NETWR.
ENDAT.
ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000223'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
var = VAR1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
tables
i_vbrk = I_INVOICE
i_vbak = I_ORDER
i_vbrp = I_ITEM
i_kna1 = I_ADDRESS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Purchase order terms and conditions in french
Hi,
i want purchase order terms and conditions in print preview to appear in french.I added that graphic and added conditions also.I maintained material and vendor in french language still it is not displaying terms and conditions in french.How tomake this to appear in french?Is it related to MM config or basis issue.?hi
take help of abaper for this
and if u need print whole po in french then in messages for condition type neu maintain language as french
regards
kunal -
How to print last page in sap script in ladscape format?
Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
PravinHi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam -
Not to print last page in Script
Hi Experts,
I am having a Z-script for tcode F110.
There i don't want to print 'last' Page in the form.
The program which i s calling driver program is a standard sap include RFFORI06 calling
'Last ' page with window 'Summary'.
As its a standard include i can't make any changes in driver program.
Please help.
Thanks in advance for your support.The 'last' page and its window is getting called from a standard sap include as mentioned above.
Even if i will delete 'last' page but as start_form is calling 'last' page it will generate a blank page irrespective
of the page 'last' is deleted.
I have even tried to do so by generating a test program and calling the script.
Kindly advice. -
HP Officejet Pro 8610 All-in-One Printing Preference does not have Print Last Page First option
HP Officejet Pro 8610 All-in-One printer: Printing Preference missing Print Last Page First option. Print lots of multipage documents. Spending enormous amount of time resorting pages.
Prior to this printer? .... grab printed stack - staple - DONE!
Now? Have to resort every document!
Anyone out there have a solution?Reply to mkjohnson42. It doesn't matter what application I'm in. The option is NOT there. Just to confirm, I started from Word 2010, Excel 2010, a web page using Internet Explorer, Foxfire and Chrome. Plus, I did the old stand-by of going to Printers and Devices>Preferences. Under Preferences I have the choice to print on both sides of paper but NO Print Last Page First. I REALLY did check ALL of this before resorting to the Community. So, I really don't understand your question. Sorry.
-
Print priview of Purchase Order
Hello Guru,
Why is that everytime we try to print priview a Purchase order via ME23N (print preview) and ME9F, price in Purchase Order output/print preview is not displayed? why must be the possible reason for this?
Thankshi,
This is because the form which is assigned to PO, may not be have the field defined for the price..
pls check with the ABAPer and make changes in the FORM
Hope it helps..
Regards
PRiyanka.P -
Not able to see Print Preview of Purchase Order.
Dear All ,
I m not able to see the Print preview of Purchase Order , as the P.O is well release , but as i m click on Print Preview , an info displays in task bar , -> " Error in OPEN_FORM for document 4501472103
Message no. ME142
Procedure
Report the error to your system administrator.
I request you to pl help how to fix this problem.
Rgds,
sap11thanx for your support , here i need to know one thing that i had gone to MN06 to display the cond. record , here for the output type i m using in P.O
Given below different key comb. are maintained for same p.o , but as p.o was created then in message tab the first combination of fax was displayed and for this combi when clicking on print preview the message came for " Error in open _form " .
1) P doc type / P. org./ Vendor = Medium = 2 ( fax) / Date / time = 1 , is maintained
2) P Doc. Type / P.org / Pgrp = Medium = 1 / date/ time = 1 is maintained.
3) P Doc. Type / P.org = Medium = 1 / date/ time = 1 is maintained
4)P org. = Medium = 1 / date/ time = 3 is maintained
Here my querry is that as medium = 1 ( print output ) is also maintain then why Other comb, were not triggered , why only Comb. for medium -=2 ( fax ) was trigered , and after that as i changed the medium to 1 , i m able to see print preview , why ?
why i m not able to see p prwe for medium 2 ?
Thanx n rgds,
sap11 -
Restrict print out of Purchase order only for Production system
Hi,
I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
is there any identifier to find the system is production or development.
can anyone tell me how to restrict it,
is there any function module, not based on client system.
Thanx in advance
KesavHi Kesavarathinam Vaidyalingam ,
yes, I also use thomas' suggestion using
t000-cccategory = 'P'.
to determine productive client.
Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to t000-cccategory = 'T'.
Regards,
Clemens -
Hi All,
I need to find Out last date purchase Order,
I have got PO Net price in colums and in Rows vendor and Document date.we have variable for Doc date to enter the date intervals ( expl 01.01.2005 to 01.02.2005). this report give the vendor with doc dates with in this month.But we to find out last documnet date of PO to that vendor.
Kind regards.
Harry
Edited by: harry power on Feb 7, 2008 3:48 PMHi Florian,
Thanks for your reply.
I want to get in the report ,last date order to the vendor ,
Could you more clear about condition and How to assign to date
Regards.
harry -
How to find print preview for purchase order like what we find in va03
hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank uHi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji -
Runtime error in print preview of Purchase Order
Hi,
I am facing a problem regarding the Print Preview of Purchase Order. This is happening after applying the patch no SAP_APPL Level 15.
The error is "<b>Z_ME_PO_FOR_PRINTING IS NOT FOUND IN THE FUNCTION GROUP ZMEDRUCK"</b> which is the copy of MEDRUCK.
How to solve the problem please guide.
Please Reply Soon
Thank you
Sankhajeet.
Message was edited by:
Sankhajeet BhowmickHi
You have customized your layout and print programs.
Suggest you to sit with your ABAP programmer and they are the best ones to go through this problem.
Your print program is looking for a function module which is missing
Best regards
Ramki -
What is the standard print prg for Purchase Order
Hi,
I am working on forms, what is the standard print program for purchase order.
Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
Regards,
claraHere are the default entries in the configuration
NEU Purchase order 1 SAPFM06P ENTRY_NEU MEDRUCK
NEU Purchase order 2 SAPFM06P ENTRY_NEU MEDRUCK
NEU Purchase order 6 RSNASTED EDI_PROCESSING
NEU Purchase order A RSNASTED ALE_PROCESSING
Regards,f
Ravi
Note : Please mark the helpful answers -
When I'm printing a document 9 Word or Excel) the last page is printed for 3/4, I'm missing the last part.
Anyone heard of this problem?
bvd.
LouisTHANKS GEO<br /><br />/* Print Last Page */<br />/* This sequence prints the last page of<br /> each document selected to the default printer.<br />* / this.print<br />({<br /> bUI: false,<br /> nStart: this.numPages - 1,<br /> bSilent: true<br />});<br /><br />THIS SCRIPT WORKS.<br /><br />TP<br /><br /><br /><[email protected]> wrote in message <br />news:[email protected]..<br />> Have you tried what was suggested in your other post:<br />><br />> thomaspinto, "Printing Last Pages" #, 2 May 2008 8:55 am <br />> </webx?14@@.59b52596>
Maybe you are looking for
-
Loading some records into Custom-R/3 table manually
Hai I created one custom R/3 table. One of my friend load some records into that cutom table manaully. I want to load some more records manually. So how can i load some records into the custom R/3 Table manully . Please let me know i ll assing the po
-
Created JSP BC4J application using JDeveloper 3.2.3. One of the functions is to interpret the tilde and overcaret keyboard characters as Greek Math Symbols when using the insert and edit JSP pages, then saving them to the 8i database. The problem I a
-
Masking is not working in Breeze
I am importing a swf into a ppt using the Breeze insert Flash. Once converted, the masking around the swf/flash file is not showing up. I have a mask around my animation in order to hide any items I don't want to show. In presentation mode with Power
-
Jpgs converting to large white squares
I have Adobe 6.0. I only use it to create simple PDFs, and don't need a lot of bells and whistles, so I haven't had the need to update it. Hoping I can explain the problem clearly! To create an ebook, I have my designer send me a JPG of the cover des
-
I'm trying to add my old airport extreme gen one to my wireless time capsule (7.6.4) network. The mac book pro sees the old airport but, won't access it with the current airport utility. What version of software do I need? Will it load on Maverick