Pro won't turn on

My pro was working then the screen went grey. It's turned off and now won't turn back on. Makes 9 beeping sounds and then after sounds like it's trying to boot up but the screen is black

Try a SMC reset. That might restore functionality.
http://support.apple.com/kb/ht3964
If not, make an appointment at an Apple store genius bar for a free evaluation.
Ciao.

Similar Messages

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

Mac OS X: Gray screen appears during startup

My mac book pro won't turn on, My mac book pro won't turn on

My mac book pro won't turn on, My mac book pro won't turn on

Go step by step and test.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and complete the Snow Leopard installation.

MacBook Pro won't turn on and just beeps. What's wrong?

My Mac book pro won't turn and instead continues to beep three times, pause and repeats itself. What's wrong?

3 beeps is a RAM problem.
you can try resetting the SMC and PRAM and see if it helps
Or reseat the RAM
or run the AHT
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

My MacBook Pro won't turn on although the battery life is showing full

My MacBook Pro won't turn on although my battery life is showing full ,

Go step by step and test.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

My MacBook Pro won't turn on. What keys do I use toed last week.

My MacBook Pro won't turn on. What are the keys to reboot? This happened last week.

http://support.apple.com/kb/HT3964 if you haven't replaced the PRAM battery in the last 4 years.
If you have:
http://support.apple.com/kb/HT1379
Note, the PRAM battery is not the normal replaceable battery for power. It is the equivalent of the PC CMOS battery.

My MacBook Pro won't turn on, what's wrong?

My MacBook Pro won't turn on. What's wrong?

gobetty wrote:
My MacBook Pro won't turn on. What's wrong?
Depends upon what you mean by it not turning on, there are various causes.
Is the power button pressed and nothing happens? Disconnect all other devices, then a SMC and NVRAM reset.
Is there a white screen and nearly nothing? A hosed EFI firmware.
Is there a grey screen and a loading bar that gets stuck? Either a failed firmware update or corrupted drive/OS X.
Is there a grey screen with a spinning wheel? Bad third party or Apple at boot kext file.
Are you loading but not able to log in? Possible corrupt third party software designed to startup upon login.
..Step by Step to fix your Mac

My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

Might be a problem with the adapter.
Help here > Apple Portables: Troubleshooting MagSafe adapters

My macbook pro won't turn on without any reason?

my macbook pro won't turn on without any reason, is there any solution in this case?

You need to hit the "reply" button on post to whom your responding too, it's hard to tell if your responding to me or someone else.
small button on the side of the computer and didn't lightting up( no reponse at all). is their any problems do think with the battery?
Usually if your battery is dead because it wasn't charged you can do the SMC Reset and then check the Magsafe if it's connected and showing the orange light, then let the battery charge up.
Once the battery charges up, the computer will boot normally and then you have to reset the PRAM, time, date etc.
https://support.apple.com/kb/TS1365
Magsafe issues: https://support.apple.com/kb/TS1713 https://support.apple.com/kb/TS4127
*PRAM Reset http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
What's store in PRAM https://support.apple.com/kb/HT1242
Hardware Test
https://support.apple.com/kb/ht1509

I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen goes to blue screen and that is it...HELP

I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen turns blue and that is it. HELP!!

Run through this list of fixes
Step by Step to fix your Mac
You can do this to copy and remove files from the non booting internal
Create a data recovery/undelete external boot drive

My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

Yes if your model MBP has a removable battery. If it does not:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
http://support.apple.com/kb/HT3964

Mac book pro won't turn on black screen and capslock key on

Macbook pro won't turn on - black screen and caps lock light is on

Hi Daleobrien73,
Welcome to Apple Support Communities.
You may find some useful suggestions for troubleshooting your MacBook Pro in these articles:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best,
Jeremy

My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My 1 year old Macbook Pro won't turn on and won't charge - no power light at all. Any suggestions?

My 1 year old Macbook Pro which ran out of warranty this month on the 3rd of June, won't turn on and when I plug in the charger, there is no charging light and it won't turn on. Can someone tell me what I should do? Has it died? It's only new! And I've never dropped it. Will I loose all my data? Help!

Try here > Troubleshooting: My computer won't turn on
And here > Apple Portables: Troubleshooting MagSafe adapters
Try the help from the suggestions above.
Hopefully it's nothing serious and you have a backup you can restore from if necessary.

Macbook Pro won't turn on

Hi, I have a Macbook Pro (not sure the year, maybe 2007 or 2008). It will not turn on. I have tried everything that apple suggests. When I press the button on the bottom on the battery it lights up 5 green circles so am assuming it is fully charged. I have left it charging for 2 days but it still won't turn on. Does anyone have any suggestions? I can't get the cd in to boot it from the disk cos it is completely dead...
also....
* if i cannot get it to boot up, does that mean i have lost all my data? all im really concerned about is my photos, i dont have them backed up any where
* if i take it to a apple shop, how much do they charge to look at it?
thanks
I have pushed the on/off button many times, held it down down different lengths of times, taken the battery out, reset my RAM.
There is no light, normally when it is sleeping it fades in and out, i have nothing! No activity at all when i try restarting, no lights, no sounds, no screen activity, nothing!!

im sorry but isnt the point of a user to user forum to get advice from fellow users before you take it to apple???
that is one of the most unhelpful responses ive seen - well done sig!

Pro won't turn on

Similar Messages

Maybe you are looking for