Problem Connecting to J2ee engine for EP6.o

Hello Gurus,
Help needed..I tried my best in searching several OSS notes but none helped me.
We installed EP6.0 on HPUX 11.1/Oracle 9.2.04
I upgrades J2ee Engine to patchlevel 17.
WHen trying to apply SP2 using SDM, it is erroring out : unable to connect to J2ee with Administrator!!
I launched j2ee admin console and trying to connect(port 50104), user: Administrator, Password none, but in vain.The folowing error is coming:
javax.naming.NamingException:Connection lost
ID003814: !UNSOLICITED! JNDI Exception in getInitialContext of initialCOntextFactoryImpl [Root exception is com.inqmy.services.rmi_p4.P4IOException:Connect
I am able to connect to j2ee engine using telnet to 50108 port with user: Administrator withoout any password.
When I do lsc..it is listing dispatcher (port 50110) and Server (port 50120).
I started the portal (system # 01) and the element joined ...(Element 628068834 joined)
But when I try to connect to the portal using explorer
(http:/myserver:80100 or http:/myserver:80100/irj) , I am getting the following error:
Dispatcher running, but no server connected!
Earlier to applying J2ee ENgine patch 17, I was able to connect to the portal.
Please help me understand what is going on with our EP installation and any experiences/guidance to bring life to EP6.0
thank in advance.
paparaju buddhavarap

Paparaju -
1. How are you starting the portal (i.e. go scripts or unixdaemon)?
2. Is the R/3 startup service set to Manual?
If it is not, I'd recommend setting to manual and shutting down all portal processes before restarting.
Regards,
Kyle

Similar Messages

Does IC WebClient require a J2EE engine for any of its component

Does IC WebClient requires a J2EE engine for any of its component? What's the need to install j2ee engine on CRM server?
I would appreciate if anybody could give a good answer or any kind of documentation on it.

Prakash,
The answer is yes in terms of the J2EE enginge being required. It primarily handles your multichannel access and broadcast messaging for the call center. If you don't install it, then your IC webclient will not work correctly. We are not using the "telphony" features of the call center, but still installed the java piece so that the standard functionality would work correctly.
Good luck,
Stephen

Where i find trail version of j2ee engine for client machine.

Hi,
I am new bee in sap netweaver . Now i have ecc 5.0 at my office. I need to make WebDyn pro application at my client side. For testing purpose i need to create java environment for running my dynpro applications. So please can any one tell me where i find trail version of j2ee engine for client machine.
Please explain it and provide me paths where i download environment.
Regards,
Gurprit Bhatia

"(also, my profile says that I'm running OS X 10.4.6, but I'm not really sure, that's just what one of the disks has written on it that came with my used and very cheap machine "
Click on the blue Apple icon at the top left of your screen and choose About this Mac. That will tell you what your OS version is and what amount of RAM you have. The "More Info" button in the pop-up screen will give you the Apple System Profiler application and that will give you whole bunches of information on the drive space used etc.
David

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

Can no longer connect to j2ee engine

I recently posted about an XI 3.0 Demo problem that was fixed by changing the icm/host_name_full parameter in the instance profile to a FQDN (thanks again for the help Alwin!). However, without being able to actually determine why, as we didnt change anything else, we lost connection to the j2ee engine, as we cannot connect to the Integration Builder, nor the SLD, etc. Now when we browse to http://server_name:50000/rep/start/index.jsp we get a server not found error and cannot determine what has changed to cause ths problem. Any suggestions?
Thanks, Eric

Eric,
As you are saying you can't access the J2ee engine. Have you tried to access http://servername:50000
Do you get the opening page then. If not, I suppose your j2ee stack isn't started.
Are the necessary parameters for starting it still there in the instance profile:
rdisp/j2ee_start
exe/j2ee
rdisp/j2ee_start_control
If so, restart the system, and search for the logs of the J2ee. There must be a failure in there.
Best regards,
Alwin

Problem in starting J2EE engine in Developer Workplace SR2 Preview

Hi.
Happy New Year all.
I installed SAPNW2004s Developer Workplace SR2 Preview.
Installation is successful and J2EE engine starts properly.
I am getting problem in starting the J2EE server when I restart the system.
Following is the trace i got.
Any help in this regard would be great.
Regards,
Jani.
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice thread started, listening on port 50013
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
SIRI\janaki is stopping R/3 System at 2007/01/01 13:36:22
(3336) Parent Shutdown at 2007/01/01 13:36:22
(3336) Cannot terminate child processes.
SIRI\janaki is starting R/3 System at 2007/01/01 13:36:22
SAP-R/3-Startup Program
Starting at 2007/01/01 13:36:22
Startup Profile: "E:\usr\sap\J2E\SYS\profile\START_JC00_siri"
Starting Programs
(4032) Execute: E:\usr\sap\J2E\SYS\exe\uc\NTI386\sapcpe.EXE pf=E:\usr\sap\J2E\SYS\profile\J2E_JC00_siri list:E:\usr\sap\J2E\SYS\exe\uc\NTI386/j2eeinst.lst
(4044) Execute: E:\usr\sap\J2E\SYS\exe\uc\NTI386\sapcpe.EXE pf=E:\usr\sap\J2E\SYS\profile\J2E_JC00_siri list:E:\usr\sap\J2E\SYS\exe\uc\NTI386/igsexe.lst
(4060) Execute: E:\usr\sap\J2E\SYS\exe\uc\NTI386\strdbsj2ee.cmd J2E j2ee
(1772) CreateProcess: E:\usr\sap\J2E\JC00\exe\jcontrol.EXE pf=E:\usr\sap\J2E\SYS\profile\J2E_JC00_siri

Hi Siddhesh.
Also I got the following exception in jvm_bootstrap file.
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0052253].
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://siri/J2E [Restart required].
     at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:188)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
     ... 14 more
[Bootstrap module]> Problem occurred while performing synchronization.
Waiting for your reply.
Thank you in advance.
Regards,
Jani.

What J2EE engine for SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Ed

Hi experts,
I am installing SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition. For that
1.what J2EE engine sholud be installed?
2.where is it available?
3.give Installation procedure for this.
They have given it as trial version will it expire soon.
Regards,
karthik.

hi karthi,
This Section provides information on how to prepare the standard installation of the SAP System.
The below mentioned steps are to be done before going for a installation.
1.     Check the Resolution of the Screen - Screen resolution to be set to 1024 X 768.
2.     Check for Screen Saver Settings - Screensaver to be set to OFF
3.     Check for Installed OS and Service Pack.
4.     Check for all the Hardware related details Installation of drivers
5.      Check for Data Throughput for Network Adaptors.
Right Click the Local Area Connection -> Select Properties -> Select File & Printer Sharing for Microsoft Networks and click on Properties -> Click radio button for Maximize throughput for Network Connection
go to SAP market place web site u got more information about this
Regards,
P.Manivannan.

Cannot connect to j2ee engine from NDS

Not sure if this is the right forum to post this.
When I set the J2EE parameters from my NDS(Windows->Prferences->j2EE engiine),I get the following error message:
"Exception: The message server did not respond within 60 sec.Please check if the message server is running and if the socket connection has been established.Nested Exception : null"
I am able to ping the server and telnet to the port(3602)where the j2ee engine is running.But the NDS does not seem to be able to connect it.
Can anybody help?
regards,
Bhupesh

Hi bhupesh
under message server port give the host name or ip address of j2ee engine host
and under port give the scs instance number
(i.e for scs 01 give 3601)
regards,
kaushal

How to install local J2EE Engine for NTW4 Dev Studio ?

We installed a full Web As 640 ABA+J2EE stack9 , and activated all the JDI components (DTR, CBS, CMS).
NOw we instaleld on local pc the Developer Studio and are trying to begin teh develop of java packages.
We are not able to activate the debug on the remote J2EE ENgine.
According the HelpOnline we should install a local J2EE Engine in order to be able to do debugging.
The problem is taht nowhere is written where to find out this software and how to install.
Anyone has some experience on that ?
Regards
G.
Regards

Hi Gianfranco,
I see. Then, you are right. You need a local J2EE Engine.
There is a guide how to install a Developer Workplace at:
http://service.sap.com/instguidesnw04 -> Installation -> Dev Env -> Inst. Guide - SAP NetWeaver Developer Workplace Stack x
Hope, that will help.
And I guess, the following might be of some help after you complete the installation: http://help.sap.com/saphelp_nw04/helpdata/en/92/fa369fb68e004598f246494665a49e/frameset.htm
Best regards,
Viliana
Message was edited by: Viliana Encheva

Problem Connecting with SAP R3 for creating new model

Hi,
i have a problem with connecting to the SAP R/3 when i want to create a new model with BAPIs.
The error is:
Internal Error has occured.
Plugin name: Web Dynpro Model Editor Services
Method: next Pressed
Message: Internal error - see detail information in exception trace.
Exception: Failed to execute runnable
How do i get to the exception trace, or what could be the problem?
Regards. Stefan

Hi, thanks for your answer.
I changed the things, but now this problem appears.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.941" but required at least version "620.0.1220".)
What can i do with this mistake?

Problems connecting MacBook to SmartNav for audio playback

My daughter is an over the road truck driver. she recently purchased a new Peterbilt with SmartNav. She attempted to cable her MacBook to the AUX port via a 3.5mm mini phone cable, but the audio only plays one channel. She had the shop investigate and they told her that she needed an adapter and pointed her to http://www.kvconnection.com/Default.asp which describes other 3.5mm cables, but doesn't specify which to get.
Are there other options available, such as a USB to USB audio out? Or a specific adapter cable that she should get to connect her MacBook to the SmartNav systerm?

Is the MacBook connected to its AC power adapter? It needs to be for closed clamshell to work.

Trial version of SAP J2EE engine and Development environment for Windows

Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.

Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir

HTTPS server on J2EE Engine

Hi there,
I have to write a little HTTPS server which runs on the J2EE Engine for handling some HTTPS requests.
For this, the server should use a certificate from the J2EE Engine's Key Store. Wiht the following code I try to load the certificate and start the server.
String privKeyView = "service_ssl";
          String privKeyAlias = "ssl-credentials";
        if ((privKeyView != null) && (privKeyAlias != null)) {
        SAPSecurityResources secRes =
            SAPSecurityResources.getInstance();
        KeyStoreManager ksMgr =
            secRes.getKeyStoreManager(PermissionMode.SYSTEM_LEVEL);
        java.security.KeyStore ks = ksMgr.getKeyStore(privKeyView);
        ISsfProfile privKeyProf = ksMgr.getISsfProfile(ks, privKeyAlias, null);
        java.security.PrivateKey privKey = privKeyProf.getPrivateKey();
        KeyManagerFactory kmf =
            KeyManagerFactory.getInstance("SunX509");
        kmf.init(ks, keypassword);
        SSLContext sslcontext = SSLContext.getInstance("SSLv3");
        sslcontext.init(kmf.getKeyManagers(), null, null);
        ServerSocketFactory ssf = sslcontext.getServerSocketFactory();
        SSLServerSocket serversocket =
            (SSLServerSocket) ssf.createServerSocket(10443);
        final String[] enabledCipherSuites = { "SSL_RSA_WITH_RC4_128_MD5" };
        serversocket.setEnabledCipherSuites(enabledCipherSuites);
        Socket client = serversocket.accept();
The problem is, that the accept() fails with an javax.net.ssl.SSLException: No available certificate corresponds to the SSL cipher suites which are enabled.
This seems to make sense, because the Cipher suite isn't bound to that custom port (which is configured at SSL Provider Service of Visual Admin). But on the other hand I cannot add any custom entry in Visual Admin.
Does anybody has expierience in writing an SSL Server on J2EE Engine? Please help. Any hint will be highly appreciated.
Thanks in advance,
Matthias

Hi Eddy,
Sorry just got round to checking on this. The documentation you point to here is what we used as the basis for our setup.
We are attempting to use End-2-End SSL and did modify the SWD profile accordingly. It does not work however. If I connect via SSL directly to the J2EE server it works fine. Also connecting via HTTP thru the SWD works as well.
We are unsure as to whether there is something (parameters, service, etc.) that we have to set up via SMICM and/or RZ10 to enable SSL on the ICM? Or even whether that is necessary.
Ideally what I'd like is if someone can explain step-by-step what needs to be set up in the ABAP stack/message server that would be great.
Thanks
Brian

Cannot start the j2ee engine

hello.
we are facing a problem with the J2EE engine of WAS.
we stopped the server for some reasons and when trying to restart it, the server shows an error after loading the service manager ,in the server and the server is not getting connected.i am pasting the errors below:
"Loading: ServiceManager ...
ID000539: Classload error; Can't load service telnet because referenced service shell not found"
and
"ID000544: Error starting service security. JCO.classInitialize(): Could not load
middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
default_cpc_mode"
Also in the management console of the j2ee engine we are unable to find the database instance in the tree. we checked the view and nothing is hidden.
We will be thankful if anyone can throw some light. Thankyou

Hi,
AFAIK this error occurs when server/services/shell directory is missing. I think you have moved it somewhere or renamed it.
Also check the following link.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/search%21default.jspa%3FforumID%3D45%26threadID%3D55413
Regards
Vijith

Installation error u2013 SAP J2EE Engine, error at step importJavaDump

Dear All,
I have installed NetWeaver Developer Studio but getting problem for SAP J2EE Engine installation
I have given following parameter at the time of installation.'
           RDBMS MaxDB
           'package location' - C:\Program Files\NetWeaverDeveloperStudio\NW_JAVA_700SP14_SR3 \MAXDB76_NW07
           'Copy package To' - c:\sapdb
           UC Kernel nw 7.0 R3
           'package location' - C:\Program Files\NetWeaverDeveloperStudio\NW_JAVA_700SP14_SR3\NW05SR3_KRNL3
          'Copy package To' - Left empty
           Chose option - No SLD destination
My operating system is Window Vista Home Basic. Is vista support SAP J2EE engine?
MaxDB has been installed but how it can be checked whether it has been installed properly?
sapinst.log u2013 Error description
ERROR 2008-06-24 15:57:07.104
CJS-30049 <html> <head> </head> <body> Execution of <font face="Monospaced">JLoad</font> tool 'C:\Program Files\Java\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec AN2,jdbc/pool/AN2,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.properties,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.key -dataDir "C:/Program Files/NetWeaverDeveloperStudio/NW_JAVA_700SP14_SR3/NW05SR3_DEV_WP_1\JAVA_EXPORT\JDMP" -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/jload.java.log' for more information. </body></html>
ERROR 2008-06-24 15:57:07.104
FCO-00011 The step importJavaDump with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
jload.java.log u2013 Error description
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Jun 24, 2008 10:27:05 AM com.sap.inst.jload.Jload main
INFO: Jload -sec AN2,jdbc/pool/AN2,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.properties,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.key -dataDir C:/Program Files/NetWeaverDeveloperStudio/NW_JAVA_700SP14_SR3/NW05SR3_DEV_WP_1\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\IMPORT.XML -log jload.log
Jun 24, 2008 10:27:07 AM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
It would be great help if I can get any clue to solve this?
Thanks & Regards,
Anup Garg

Hi Anup,
If you want to install developer studio then you need not to install J2ee engine for this.
Actaully there are 2 products :
1. Developer studio
2. Developer workplace.
In fact these are not 2 products but if you want to install developer studio with local runtime environment then you need to install developer workplace.
So (J2EE engine + Developer studio)= developer workspace
you can install developer studio on XP, windows 2003 server and NT platform but not sure for VISTA. But it should work on vista with no problem.
but you can install developer workspace only on server platforms because it needs J2EE engine to be installed as a prerequisite.
in your case , you need windows 2003 server instead of vista if you want j2ee engine and developer studio both.
In case you only want to install developer studio, you can install it from developer workplace DVD .
browse to Dev workplace DVD( Example path for version 7.0)
DVD>IDE>IDE70setup
execute this setup. it will only installdeveloper studio.
please award points if above info is helpful.
regards
Saurabh

Problem Connecting to J2ee engine for EP6.o

Similar Messages

Maybe you are looking for