Problem Consuming Web Service

Hello,
I have the following code:
REPORT  zprueba6.
DATA: zws           TYPE REF TO zsondaco_consulta_estado_pago.
DATA: lo_system_ex  TYPE REF TO cx_ai_system_fault.
DATA: lo_app_ex     TYPE REF TO cx_ai_application_fault.
DATA: ls_input TYPE zsondaconsulta_estado_pago_se1.
DATA: ls_out   TYPE zsondaconsulta_estado_pago_ser.
START-OF-SELECTION.
  TRY.
      CREATE OBJECT zws.
    CATCH cx_ai_system_fault .
  ENDTRY.
  break josechau.
  TRY.
      CALL METHOD zws->consulta_estado_pago_service_o
        EXPORTING
          input1  = ls_input
        IMPORTING
          output1 = ls_out.
    CATCH cx_ai_system_fault INTO lo_system_ex.
      WRITE: / 'System fault occurred', lo_system_ex->errortext.
    CATCH cx_ai_application_fault INTO lo_app_ex.
      WRITE: / 'Application fault occurred ', lo_app_ex->textid.
    CATCH cx_sy_ref_is_initial.
      WRITE: / 'Object is initial'.
  ENDTRY.
I have created the Proxy Class and I have created a logic port in lpconfig for this proxy class.
When I run this program or any program using any Web Service I receive the following exception:
System fault occurred Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
Any help would be appreciated.
Best Regards

Finally I used another WS.
We suppose it is a problem with the WSDL Schema but we are not sure.
Best Regards

Similar Messages

  • Problem consuming web service created by ABAP via standalone java client

    I'm trying to consume web service created by ABAP in R3 system via standalone java client. I should be getting a string reply after consumed the web service (ZSMS_INBOUND), but so far i received null. I cant find any exception or log to trace the problem. Any help would be appreciated. Is there anything wrong with my client calling the web service?
    public void myMethod{
              // TODO : Implement
              try{
                   Stub stub = (Stub)new ZSMS_INBOUNDServiceImpl().getLogicalPort();
                   stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,"http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-               client=100&wsdl=1.1&mode=sap_wsdl");
                   inboundService = (ZSMS_INBOUND) stub;
                   BAPIRET2 str = inboundService.ZSMS_INBOUND(date, message, modemId, smsId, tel, time);
                   ackDeliveryArray<i> = str.toString();
              }catch (Exception e) {
                   e.printStackTrace();
    Generated following SAP help standalone proxy creation steps.
    ***files fr SEIs
    ZSMS_INBOUND.java   (interface)
    ZSMS_INBOUNDService.java  (interface)
    ZSMS_INBOUNDServiceImpl.java
    ZSMS_INBOUNDSoapBindingStub.java
    ***files fr Proxy classes
    ZSMS_INBOUND.java
    ZSMS_INBOUNDResponse.java
    BAPIRET2.java
    .... many more files
    the wsdl is as below (generated by ABAP):
    <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:n0="http://www.sap.com/webas/630/soap/features/authentication/" xmlns:sap="http://www.sap.com/webas/630/wsdl/features" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <wsdl:types>
    - <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
    - <xsd:simpleType name="char1">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="1" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char10">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="10" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char17">
    + <xsd:restriction base="xsd:string">
      <xsd:maxLength value="17" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char170">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="170" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char20">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="20" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char220">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="220" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char30">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="30" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char32">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="32" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char50">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="50" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="date">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="10" />
      <xsd:pattern value="\d\d\d\d-\d\d-\d\d" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="numeric3">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="3" />
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="numeric6">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="6" />
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="time">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="8" />
      <xsd:pattern value="\d\d:\d\d:\d\d" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:complexType name="BAPIRET2">
    - <xsd:sequence>
      <xsd:element name="TYPE" type="tns:char1" />
      <xsd:element name="ID" type="tns:char20" />
      <xsd:element name="NUMBER" type="tns:numeric3" />
      <xsd:element name="MESSAGE" type="tns:char220" />
      <xsd:element name="LOG_NO" type="tns:char20" />
      <xsd:element name="LOG_MSG_NO" type="tns:numeric6" />
      <xsd:element name="MESSAGE_V1" type="tns:char50" />
      <xsd:element name="MESSAGE_V2" type="tns:char50" />
      <xsd:element name="MESSAGE_V3" type="tns:char50" />
      <xsd:element name="MESSAGE_V4" type="tns:char50" />
      <xsd:element name="PARAMETER" type="tns:char32" />
      <xsd:element name="ROW" type="xsd:int" />
      <xsd:element name="FIELD" type="tns:char30" />
      <xsd:element name="SYSTEM" type="tns:char10" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:element name="ZSMS_INBOUND">
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="DATE" type="tns:date" />
      <xsd:element name="MESSAGE" type="tns:char170" />
      <xsd:element name="MODEMID" type="tns:char10" />
      <xsd:element name="SMSID" type="tns:char17" />
      <xsd:element name="TEL" type="tns:char20" />
      <xsd:element name="TIME" type="tns:time" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
    - <xsd:element name="ZSMS_INBOUNDResponse">
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="RETURN" type="tns:BAPIRET2" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="ZSMS_INBOUND">
      <wsdl:part name="parameters" element="tns:ZSMS_INBOUND" />
      </wsdl:message>
    - <wsdl:message name="ZSMS_INBOUNDResponse">
      <wsdl:part name="parameters" element="tns:ZSMS_INBOUNDResponse" />
      </wsdl:message>
    - <sap:Feature name="design_0" uri="http://www.sap.com/webas/630/soap/features/authentication/">
    - <sap:Property qname="n0:AuthenticationLevel">
      <sap:Option value="n0:None" />
      </sap:Property>
      </sap:Feature>
    - <wsdl:portType name="ZSMS_INBOUND">
      <sap:useFeature feature="tns:design_0" />
    - <wsdl:operation name="ZSMS_INBOUND">
      <wsdl:input message="tns:ZSMS_INBOUND" />
      <wsdl:output message="tns:ZSMS_INBOUNDResponse" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ZSMS_INBOUNDSoapBinding" type="tns:ZSMS_INBOUND">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ZSMS_INBOUND">
      <soap:operation soapAction="" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="ZSMS_INBOUNDService">
    - <wsdl:port name="ZSMS_INBOUNDSoapBinding" binding="tns:ZSMS_INBOUNDSoapBinding">
      <soap:address location="http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-client=100" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>

    I'm now able to consume the web service, but with the error as below:
    Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
    Error Message is :com/sap/guid/GUIDGeneratorFactory
    BAPIRET2 mappingInfo:
      TYPE   TYPE   false   false   11
      ID   ID   false   false   11
      NUMBER   NUMBER   false   false   11
      MESSAGE   MESSAGE   false   false   11
      LOG_NO   LOG_NO   false   false   11
      LOG_MSG_NO   LOG_MSG_NO   false   false   11
      MESSAGE_V1   MESSAGE_V1   false   false   11
      MESSAGE_V2   MESSAGE_V2   false   false   11
      MESSAGE_V3   MESSAGE_V3   false   false   11
      MESSAGE_V4   MESSAGE_V4   false   false   11
      PARAMETER   PARAMETER   false   false   11
      ROW   ROW   false   false   11
      FIELD   FIELD   false   false   11
      SYSTEM   SYSTEM   false   false   11
    My java code is :
    public class MyTest {
         public static void main(String[] args){
              try{
                             Stub stub = (Stub)new ZSMS_INBOUNDServiceImpl().getLogicalPort();
                             stub._setProperty(javax.xml.rpc.Stub.ENDPOINT_ADDRESS_PROPERTY,"http://mytest:8080/sap/bc/srt/rfc/sap/ZSMS_INBOUND?sap-client=100");
                             ZSMS_INBOUND inboundService = (ZSMS_INBOUND) stub;
                             BAPIRET2 str = inboundService.ZSMS_INBOUND(param1,param2,param3,param4,param5,param6);
                             System.out.println(str.toString());
                             }catch (Exception e) {
                                  e.printStackTrace();

  • Problem consuming Web Service from ECC 6.0 using dual certificates

    Hi, I am trying to consume a secure web service on ECC 6.0 - so far without much luck.
    When I try to connect to the ws server, it seems there are three certificates in action: a CICS certificate for establishing the SSL connection, a 'root' certificate from the PKI certificate issuer, and a private certificate issued by the above issuer (please forgive me if a have the syntax wrong - certificates are not my primary line of work). So, using Trust Manager (STRUST), I have created a PSE named 'OES' and imported all three certificates into it.
    In SOAMANAGER I have set up the end-point using the WSDL-file and set the following parameters:
    - Authentication Method = X.509 Client Certificate
    - Trustworthiness Method = Holder of Key
    - Issuer = <issuer from the root certificate>
    - Name of Attester = <blank>
    - Validity of SAML Assertion = 180
    - Caching of SAML Assertions = False
    - Attester System Destination = <blank>
    - Name of Attester = <blank>
    - User = SRxxxWS
    - Password = <blank>
    - Client PSE = OES
    When I try to consume the web service, I can see in the log files that the CICS certificat is used for establishing the SSL connection but all I receive back is an HTTP 403 "Client Authentication Error". If I remove the CICS certificate from the PSE, the connection is not made.
    How do I make the client certificate available for the connection? Have I approached the problem from the wrong side? Has anybody experienced something similar? Any help will be highly appreciated.
    Thanks,
    Bo

    Hi,
    I am not Certificate expert either but you can get plenty of help from "Security" forum on SDN. I can help you bit with some related SAP notes and forum answers:
    See following notes :
    1324884 - Analysis of ABAP Web Service SOA Configuration
    1318906 - Trace analysis of SSL problems
    1319507 - Overview: Analysis of ABAP Web Service Configuration
    See this forum discussed about consuming secured ws in webdynbpro:
    Problem in Calling Secure Webservice.
    Articles:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/92914af6-0d01-0010-3081-ded3a41be8f2&overridelayout=true -
    Web Services Security Configuration Guide (discussed IBM and NW WS security but you can find some examples and hints there)
    Regards,
    Gourav

  • Problem  consume Web Service in SAP

    Hi experts,
    I need your help to solve this problem.
    I must consume one Web Service, but my SAP R3, don't  interprets the XML.
    (SE80 - > enterprise services -> create  -> Service Consumer )
    i tried to  put  the URL and  copy to text file , neither worked,
    the Error:
    Exception occurred in communication framework:Error in File Upload:
    rc=1 C:\Users\XPTS853\Desktop\array.xsd
    solution remove this line
    <import namespace="http://schemas.xmlsoap.org/soap/encoding/" schemaLocation="array.xsd";/>
    now give me this error:
    Exception occurred in library handler
    Illegal syntax:     Extension element http://schemas.xmlsoap.org/wsdl/soap/:operation not valid in element operation
    can you help me? suggestions ?
    note: i use complex structures are they the problem?
       <complexType name="operationInD">
                <sequence>
                   <element name="MN" type="string"/>
                   <element name="Nile" type="int"/>
                   <element name="NewMainB" type="float"/>
                   <element name="NCode" type="string"/>
                </sequence>
             </complexType>

    hi thanks,
    my WSDL is valid.. 
    the error is base in interpretation of XSD...  i think..
    Incorrect value: XSD namespace  not available
    thank. the file is great, but is not related with this problem... (i have all supported tag´s)

  • Problem consuming web service with basic authentication

    Hello,
    I've set up a web service with basic authentication. Although I have to log in before being able to open the overview page of the web service in the Web Service Navigator, the response I get after sending a request is:
    Authority check failed
    I get this response in the Web Service Navigator as well as when consuming the web service via standalone proxy classes.
    The following is strange, too: It is not possible to change  authentication in the generated logical port. It is set to "none". I changed it via the XML file where I added the properties "AuthenticationMethod" (value "BasicAuth") and "AuthenticationMechanism" (value "HTTP"). But I got the above response anyway.
    Thanks for your help!
    Regards

    I used basic authentication for my web service.
    I was able to obtain a hardcopy of the logfiles in the meantime. The invocation of the web service is stored there with the following error messages:
    <i>SOAP Runtime: Exception message: Schwerer Prozessierungsfehler macht eine SOAP-Fault-Behandlung erforderlich
    SOAP Runtime: SOAP Fault exception occurred in program CL_SOAP_RUNTIME_SERVER========CP in include CL_SOAP_RU NTIME_SERVER... [the picture is cut here]</i>
    In addition to that I found a thread in SDN that dealt with exactly the same problem:
    Web Service Homepage: Authority check failed
    But I have the same problem like Kimberly Carmack (the last post on the second page). We do not have that role in our system.

  • Problem at Consume WEB Service in ABAP

    hello!!
    I tell them my problem, is to create a web service from the SE80,  which could be used properly.
    Then there was a change of server, which migrated to the developments and the web service is recreation, but this can not be consumed.
    now I need help, is where do I indicate that the basis so that they can return to consume web services, what services or settings should be activated.
    any suggestion or help are welcome.
    The ECC system is a 5 AS ABAP only.
    from now, I appreciate any help or guidance I can get.

    What is the problem? Are all the services active in SICF for web services and how is the web service being consumed is it through a wsdl file ?

  • Problem when consuming web service on WIndows authentication applcation

    Hi,
    I am having a tough time in consuming web services on a
    Windows authentication IIS server.
    In one of my application I have created web services and
    consuming those web services from my another application.
    If I turned off the Windows authentication everything works
    fine, but If I turned on the Windows authentication web services
    stop working.
    Has anyone encountered such error while working with web
    services on Windows authentication server.
    Attach Code
    Could not perform web service invocation "funGetCustomer".
    Here is the fault returned when invoking the web service
    operation:
    AxisFault
    faultCode: {
    http://xml.apache.org/axis/}HTTP
    faultSubcode:
    faultString: (401)Unauthorized
    faultActor:
    faultNode:
    faultDetail:
    {}:return code: 401
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "
    http://www.w3.org/TR/html4/strict.dtd">
    <HTML><HEAD><TITLE>You are not authorized
    to view this page</TITLE>
    <META HTTP-EQUIV="Content-Type" Content="text/html;
    charset=Windows-1252">
    <STYLE type="text/css">
    BODY { font: 8pt/12pt verdana }
    H1 { font: 13pt/15pt verdana }
    H2 { font: 8pt/12pt verdana }
    A:link { color: red }
    A:visited { color: maroon }
    </STYLE>
    </HEAD><BODY><TABLE width=500 border=0
    cellspacing=10><TR><TD>
    <h1>You are not authorized to view this page</h1>
    You do not have permission to view this directory or page
    using the credentials that you supplied because your Web browser is
    sending a WWW-Authenticate header fi...

    You could try switching the HTTP transport provided in the
    Apache Axis embedded in ColdFusion to "CommonsHTTPSender".
    See this blog post:
    http://tjordahl.blogspot.com/2007/03/apache-axis-and-commons-httpclient.html

  • VC problems with  web services  when are consumed

    Hi everybody
    Inside the portal I am using the Visual Composer tool. I am development models which are consuming web services from XI.
    Once they are consumed, I compiles and deploys, they were works very well, but there are cases
    when the XI server is down, and in this moment I need reusethose web services, stop working and doesn´t appearsin the XI monitoring tool.
    Now, the XI area needs regenerate those web services affected only renamed it, and with this everything
    returns to work.
    Someone knows what happens?
    Thansk
    Ivan

    Hi Bhupesh,
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    503 service unavailable is:
    The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay.
    Try to stop ur server and restart it again,so that the load is minimized.
    Hope it helps,
    Regards,
    Nagarajan.

  • Biztalk 2010 - Consume Web Service with Certificate

    Hi
    I have to consume a java web service with Biztalk that requires authentication via a client certificate. Until now I have not been able to consume any web service where any kind of authentication was needed. Simple web services without authentication are
    no problem. Also using SoapUI works perfectly fine.
    I am generating the XSDs and the port binding with the WCF wizard in VS2010. I've read several comments that it's not possible to consume web services with the WCF-WSHttp adapter when the message format should be SOAP 1.1. Therefore I'm trying with the WCF-BasicHttp
    and WCF-Custom adapters, but I did not suceed in receiving a positive response yet.
    The web service I want to consume uses a client certificate (with a private key) and two root certificates. When I use the BasicHttp adapter I choose either 'Transport' or 'TransportWithMessageCredential' but none of them work. I also have to supply a client
    and a service certificate. I always use the one with the private key for the client but I'm not sure which one I have to use for the service. Is there a possibility that I have to provide both root certificates and if so, how can I achieve this?
    Hope the question makes sense somehow... thanks for any input.
    Error message that I receive currently is that the server needs a client certificate. However I attached it in the send port properties under the tab "Security" => mode "TransportWithMessageCredential".

    Adapter: WCF-Custom
    Binding: customBinding
    Cannot send pictures (yet).
    <configuration>
    <enterpriseLibrary.ConfigurationSource selectedSource="ESB File Configuration Source" />
    <system.serviceModel>
    <client>
    <endpoint address="...." behaviorConfiguration="EndpointBehavior" binding="customBinding" bindingConfiguration="ReceiptBinding" contract="BizTalk" name="WebServicePort" />
    </client>
    <behaviors>
    <endpointBehaviors>
    <behavior name="EndpointBehavior">
    <clientCredentials>
    <clientCertificate findValue="..." x509FindType="FindByThumbprint" />
    <serviceCertificate>
    <defaultCertificate findValue="..." storeLocation="LocalMachine" storeName="AuthRoot" x509FindType="FindByThumbprint" />
    </serviceCertificate>
    </clientCredentials>
    </behavior>
    </endpointBehaviors>
    <serviceBehaviors>
    <behavior name="ServiceBehavior" />
    </serviceBehaviors>
    </behaviors>
    <bindings>
    <customBinding>
    <clear />
    <binding name="ReceiptBinding">
    <textMessageEncoding messageVersion="Soap11" />
    <security authenticationMode="MutualCertificate" />
    <httpsTransport proxyAuthenticationScheme="Basic" requireClientCertificate="true" />
    </binding>
    </customBinding>
    </bindings>
    </system.serviceModel>
    </configuration>

  • Consuming Web Services in SSIS Script Task

    Hello
    Sorry for my English, I' ll try to explain my problem.
    I am new to SSIS. Using this article http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/01/28/consuming-web-services-in-ssis-script-task.aspx I have tried to consume web service.
    1. I have created proxy class using VS Command Prompt
    2. A have added proxy class to Script Task
    3. But when I  want to create the instance of the proxy class, it can be accessed from the ScriptMain.cs. 
    I will be very pleased for the help!

    perhaps you missed this step:
    --> Modify the code and add Credentials before calling the web method:
    Public
    SubMain()
    Dim
    ws As NewService1
    ws.Credentials =
    New System.Net.NetworkCredential("user name",
    "password",
    "domain name")
    MsgBox("Square
    of 2 = "& ws.Square(2))
    Dts.TaskResult = Dts.Results.Success
    End
    Sub
    Arthur
    MyBlog
    Twitter

  • UCCX - Consuming Web Services

    Hi All,
    I am looking for some advice in regards to consuming web services via UCCX scripting. In the past i have been doing so successfully in our environment by using document steps and Xpath expressions for both SOAP and REST web services that were configured to allow an HTTP GET request (tomcat running on apache server to expose public methods written in Java).
    Our company is in the midst of a Microsoft Dynamics 2012 (r2)  implementation and I have the task of establishing communication with AX in order to pass information back and forth. Our consultants with dynamics have setup a test web service using AIF, but it seems that these services require authentication. Currently the test web service is using NTLM authentication and exposed via SOAP. Apparently it is not possible to use HTTP GET for these web services.
    This means i had to write java code in Set steps to communicate with the SOAP services. I was able to successfully do this for some of our own web services using SOAP. however i am having problems with the AX test web service due to the authentication. (Thanks to Gergely Szabo, as i used some of his code found here: https://supportforums.cisco.com/document/97736/uccx-8x-really-simple-soap-client-no-custom-jar )
    I am hoping someone has some experience with having consumed AIF web services via Java or at least Java written within a UCCX script. Or if someone has been able to implement authentication and can provide some details for how that works? I don't even know if i can authenticate via NTLM from UCCX scripts due to it being a windows authentication protocol and not linux based.
    Any thoughts or ideas would be appreciated!
    Thanks,
    Kevin.

    Hi,
    Thus far I have been unsuccessful in my attempts to communicate with this particular web service. The consults did create another service using Basic HTTP Auth and I was able to consume and use the service using SOAPUI just fine.
    However, my soapResponseString code (small tweak of Gergely's code) is not working. After 2-3 minutes of sitting on that step in the CRS Editor my stacktrace exception is thrown and shows "Connection timed out". This is way past the time for the 5000ms read timeout, so I imagine the initial communication is successful but then eventually times out due to not returning a response?
    I tried to mimic the headers SOAPUI uses from it's HTTP Log, hence the number of urlCon.setRequestProperty lines..
    CODE for Set soapResponseString below:
    // create a ByteArrayOutputStream - this is actually a buffer
    // we are going to use to store the response coming from the SOAP server
    java.io.ByteArrayOutputStream baos = new java.io.ByteArrayOutputStream();
    // this is quite unnecessary: assigning the value of the soapRequest (still holding our XML document)
    // to another variable, named content, type String; but anyway, it's just cleaner
    String content = soapRequest;
    // specify a timeout - 5000 milliseconds - if the web server does not start sending back
    // anything within this timeframe, an exception will be raised
    int readTimeout = 5000;
    try {
    // a new URL, which is the soapServiceEndpoint variable value (http://ip:port/ etc):
         java.net.URL url = new java.net.URL(soapServiceEndpoint);
    // creating a HTTP connection to the above URL:
         java.net.HttpURLConnection urlCon = (java.net.HttpURLConnection) url.openConnection();
    // setting some important header parameters, first of all, content length, this is most likely expected
    // by the SOAP server
         urlCon.setFixedLengthStreamingMode(content.length());
    // setting the timeout:
         urlCon.setReadTimeout(readTimeout);
    // we tell Java we will do input (in other words, we will read):
         urlCon.setDoInput (true);
    // we tell Java we will do output (in other words, we will send):
         urlCon.setDoOutput (true);
    // we tell Java not to cache:
         urlCon.setUseCaches (false);
    // we are using HTTP POST
         urlCon.setRequestMethod("POST");
    // finally, we set the Content-Type header,
    // this way we are telling the SOAP server we are sending an XML, using the UTF-8 charset
         urlCon.setRequestProperty("Content-Type","text/xml;charset=UTF-8");
    // here we are sending our Basic Auth - authStringEnc is a base64 encoded user:pass credential that's initialized in a previous step
      urlCon.setRequestProperty("Authorization","Basic " + authStringEnc);
    //set some other header information for the request required by the AIF Web Service 
      urlCon.setRequestProperty("SOAPAction","http://tempuri.org/myService/getSiteId");
      urlCon.setRequestProperty("Host", "myServer.myDomain.com:8080");
      urlCon.setRequestProperty("Connection","Keep-Alive");
      urlCon.setRequestProperty("User-Agent","Java/1.6.0_29");
      urlCon.setRequestProperty("Accept-Encoding","gzip,deflate");
    // opening an OutputStream (this is a one-way channel towards the SOAP server:
         java.io.DataOutputStream output = new java.io.DataOutputStream(urlCon.getOutputStream());
    // we write the contents of the content variable (= soapRequest = XML document):
         output.writeBytes(content);
    // telling Java to flush "speed up!" and then close the stream:
         output.flush();
         output.close();
    // now getting the InputStream (getting a one way channel coming from the SOAP server):
         java.io.DataInputStream input = new java.io.DataInputStream(urlCon.getInputStream());
    // buffered read from the InputStream, buffer size 4Kilobytes (= 4096 bytes):
    // and the buffer is always written to the other buffer, named baos, that we specified
    // on the first line of this block of code
         int bufSize = 4096; // buffer size, bytes
         byte[] bytesRead = new byte[bufSize];
         int bytesReadLength = 0;
         while(( bytesReadLength = input.read( bytesRead )) > 0 ) {
             baos.write(bytesRead,0,bytesReadLength);
         } //while block ends here
    // closing the InputStream:
         input.close();
    // closing the baos buffer
         baos.close();
    } catch (Exception e) {
    // again, if an error occurs, let's just send the stack trace to stdout (stdout.log)
    // and then return null or can we can return e.getMessage() to see the exception caught inside the script
        e.printStackTrace();
     return e.getMessage();
        //return null;
    } // try..catch block ends here
    // construct a new String, and return that to the CRS script:
    return new String(baos.toByteArray());
    } // closure ends here

  • Error consuming Web service from an ABAP Program

    Hello guys,
    I'm trying to consume a Web Service that is exposed in the internet. The conecction to the Web Service its via SSL.
    I'm having a problem at the moment I call the web service from my abap program.  But I'm able to test the same web service, from the SE80 tx with out trouble.
    I have identify that there is a difference in the SOAP envelope, that its received in the Web service, when I call it from the test enviorment and when I call it from the program. 
    This is how it is received from the TEST tool (a succesfull call of th WS) :
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
    <soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body>&lt;?xml version="1.0" encoding="ISO-8859-1"?&gt;&lt;Mensaje&gt;&lt;RutEmpresa&gt;&lt;Numero&gt;76555400&lt;/Numero&gt;&lt;Digito&gt;4&lt;/Digito&gt;&lt;/RutEmpresa&gt;&lt;RutUsuario&gt;&lt;Numero&gt;12307972&lt;/Numero&gt;&lt;Digito&gt;8&lt;/Digito&gt;&lt;/RutUsuario&gt;&lt;Convenio&gt;58422&lt;/Convenio&gt;&lt;Pin&gt;aro79728&lt;/Pin&gt;&lt;Archivo&gt;&lt;Tipo&gt;PPR&lt;/Tipo&gt;&lt;Plantilla&gt;2142970592&lt;/Plantilla&gt;&lt;Nombre&gt;cargatest174.txt&lt;/Nombre&gt;&lt;Cuerpo&gt;&lt;![CDATA[G126919727     JORGE CRISTIAN VARGAS ROMERO                                                     0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000   2910200714082008Boletas honorarios|]]&gt;&lt;/Cuerpo&gt;&lt;/Archivo&gt;&lt;Fecha&gt;20080814&lt;/Fecha&gt;&lt;/Mensaje&gt;</body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
    And this is how  it is received when I consume the web service from the ABAP program.
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
    <soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body>&lt;?xml version="1.0" encoding="utf-8" ?&gt;&lt;nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"&gt;&lt;body&gt;&lt;?xml version="1.0" encoding="ISO-8859-1"?&gt;&lt;Mensaje&gt;&lt;RutEmpresa&gt;&lt;Numero&gt;76555400&lt;/Numero&gt;&lt;Digito&gt;4&lt;/Digito&gt;&lt;/RutEmpresa&gt;&lt;RutUsuario&gt;&lt;Numero&gt;12307972&lt;/Numero&gt;&lt;Digito&gt;8&lt;/Digito&gt;&lt;/RutUsuario&gt;&lt;Convenio&gt;58422&lt;/Convenio&gt;&lt;Pin&gt;aro79728&lt;/Pin&gt;&lt;Archivo&gt;&lt;Tipo&gt;PPR&lt;/Tipo&gt;&lt;Plantilla&gt;2142970592&lt;/Plantilla&gt;&lt;Nombre&gt;cargatest174.txt&lt;/Nombre&gt;&lt;Cuerpo&gt;&lt;![CDATA[G126919727 JORGE CRISTIAN VARGAS ROMERO 0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000 2910200714082008Boletas honorarios|]]&gt;&lt;/Cuerpo&gt;&lt;/Archivo&gt;&lt;Fecha&gt;20080814&lt;/Fecha&gt;&lt;/Mensaje&gt;&lt;/body&gt;&lt;/nr1:putXMLDocument&gt;</body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
    As you can see, it is generating a nr1:putXMLDocument tag, that it should not go there.
    Why do you think that this situation is happening? Please guys, this is very important, and need your help.  Thanks in advance.
    Samuel.

    BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
    Calling WebServices from ABAP via HTTPS
    Consuming Web Service from ABAP by Durairaj Athavan Raja
    Search on SDN wiki, and you will find above mentioned links.

  • Problem while testing a BAPI Web Servicei face this problem in web service

    i face this problem in web service bapi when i am carrying out the submit test... so can anyone help me???
    HTTP/1.1 500 Internal Server Error
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 803
    sap-srt_id: 20080610/144609/v1.00_final_6.40/DD36B8E7DE44B5F19BA900145E6770F3
    server: SAP Web Application Server (1.0;700)
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Client</faultcode><faultstring xml:lang="en">Deserialisation failed</faultstring><detail><n0:SimpleTransformationFault xmlns:n0="http://www.sap.com/transformation-templates"><MainName>/1BCDWB/WSS0080610064309718000</MainName><ProgName>/1BCDWB/WSS0080610064309718000</ProgName><Line>128 </Line><Valid>X</Valid><ReferenceFault><DescriptionText>Error accessing the ref. node 'EMPLOYEENUMBER'</DescriptionText><RefName>EMPLOYEENUMBER</RefName></ReferenceFault><Caller><Class>CL_SRG_RFC_PROXY_CONTEXT</Class><Method>IF_SXML_PART~DECODE</Method><Positions>1 </Positions></Caller></n0:SimpleTransformationFault></detail></soap-env:Fault></soap-env:Body></soap-env:Envelope>

    Hi,
    since I did not find that BAPI in my system: what is the exact name?
    Did you test the BAPI directly in ABAP, i.e. function builder SE37, successfully?
    Currently it looks to me as if you did not provide sufficient business data.
    Did you specify the employee number before executing the call?

  • How to consume Web Service in ABAP WebDynpro

    Hi
    I want to know the entire details about how to consume Web Service in WebDynpro application.
    regards
    Piyush

    hI piyush,
    Have a look at this Blog by Thomas Jung.
    /people/thomas.jung/blog/2007/12/17/consuming-services-with-abap
    on consuming webservies thru webdynpro ABAP
    Cheers
    Mary

  • Best practice for consuming web services

    Hi
    we are consuming web service in orchestration by "Add Generated Item".By using this option it creates 1 orch,1xsd file and some bindings.
    we have different projects for schemas,maps and orchestration under our solution in visual studio.
    Now i need to know that what will be the best practice for consuming web service in orchestration i mean in which project should i use "add generated item" (in orchstration project or in schemas project) coz it generates both 1 orch and 1
    schema.
    thanks

    From a service orientation perspective you should abstract the service artifacts from the other artifacts. Otherwise it will be very difficult to update the service interface without affecting the other artifacts. For example you don't want to have to redeply
    your entire application if only one field changes in the service you consume.
    So I typically generate the items, remove the unnecessary stuff, and put them in a separate project.
    Depending on the control you have over the services you want to consume, it would even be better to create another layer of abstraction. By that I mean create your own interface (schema) and map that one to the one the service exposes. This basically
    is only necessary if you consume external services that are beyond your control. By abstracting the interface it exposes, you limit the impact of changes of that interface on the rest of your system. All changes are abstracted behind your own interface.
    If you consume internal services, you can probably control the way the interface is defined. In a service oriented world all internal services expose a well known interface, based on the domain objects you have within your organisation.
    Jean-Paul Smit | Didago IT Consultancy
    Blog |
    Twitter | LinkedIn
    MCTS BizTalk 2006/2010 + Certified SOA Architect
    Please indicate "Mark as Answer" if this post has answered the question.

Maybe you are looking for

  • Error while deploying a mapping in owb 11.2

    Hi, I am using OWB 11.2 and when i try to deploy a mapping i get the following error. Is it some permission issue. Please let me know if anyone has faced similar issue. Its very urgent. ORA-06550: line 1, column 7: PLS-00201: identifier 'DBMS_LOB' mu

  • Will I be able to use my current Photoshop CC on a new computer when I upgrade?

    I am looking into using Photoshop CC ($9.99/mo). I need a new program right now on my current laptop. I plan to upgrade my laptop at the end of the year. Will I be able to use the same Photoshop account?

  • Purchased an app on wifi but finished downloading it on pc,cant sync it

    I just purchased angry birds on ipad but i was not able to finish downloading it in a wifi zone. So i went home to finish downloading it on my pc. I finished downloading it but I cant seem to sync it on my ipad. And the icon where I was downloading a

  • Partial page print

    only partial page is printing and only in green. have cleaned and downloaded latest driver.

  • How does Motion Handle PSD Layered Files?

    I've done an extensive search on the Discussions looking for an answer to my problem without luck. I have a layered file created in Illustrator CS. I exported the file to Photoshop so that I could retain the layers. The file opens and looks normal in