Problem during swf load
Hello, All.
We are getting problem while loading our swf in IE6. Loading
swf results flickering in IE 6. And we have not observed the same
in IE7/IE8. We tried to change the internet options etc to overcome
the problem. We are still facing the issue. Could some body point
out what could be the issue...
Thanks a lot in advance,
Prasanna.
Hi,
Can you please explain what this flickering is?
Similar Messages
-
Problem during hierarchy load from ECC 6.0 to BW
Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM -
SAP R/3 4.7 EX 2 SR1 - IDES (Unicode), Problem during DB load
Dear Experts,
Details of the system:
Solaris 10, Oracle 9.2.0.7.
R/3 Enterprise 4.7 X 2 SR1 - IDES (Unicode)
Please help me in solving this problem. I have received this error during DB load Phase 25/37. Errors are related to code page conversion failed.
Message from SAPCLUST.log:
myCluster (3.5.Imp): 1329: inconsistent field count detected.
myCluster (3.5.Imp): 1332: nametab says field count (TDESCR) is 305.
myCluster (3.5.Imp): 1335: alternate nametab says field count (TDESCR) is 311.
myCluster (3.5.Imp): 1130: unable to retrieve nametab info for logic table BSEG .
myCluster (3.5.Imp): 7305: unable to retrieve nametab info for logic table BSEG .
myCluster (3.5.Imp): 2090: failed to convert cluster data of cluster item.
myCluster: RFBLG *800**0001**0100000000**1995*
myCluster (3.5.Imp): 319: error during conversion of cluster item.
myCluster (3.5.Imp): 322: affected physical table is RFBLG.
(CNV) ERROR: code page conversion failed
rc = 2
^M
.--============--
.^M
| RSCP - Error |^M
| Error from: Codepage handling (RSCP) |^M
| code: 64 RSCPECALL Illegal mixture of procedure calls. |^M
| Table UMGSETTING of no interest in Unicode system |^M
| module: rscpexcc no: 12 line: 673 T100: TS007 |^M
| TSL01: CQ3 p3: UMGSETTING p4: & |^M
|----
|^M
| Some OS information, which may or may not belong to this error: |^M
| errno 17 File exists |^M
`----
'^M
(DB) INFO: disconnected from DB
Message from SAPPOOL.log:
failed to read short nametab of table T2200 (rc=32)conversion failed for row 5836 of table T184L VARKEY = \343\2
40\260\343\200\260\343\200\260\343\200\261\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342
\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\342\200\240\3
42\200\240
(CNV) ERROR: code page conversion failed
rc = 2
^M
.--============--
.^M
| RSCP - Error |^M
| Error from: Codepage handling (RSCP) |^M
| code: 64 RSCPECALL Illegal mixture of procedure calls. |^M
| Table UMGSETTING of no interest in Unicode system |^M
| module: rscpexcc no: 12 line: 673 T100: TS007 |^M
| TSL01: CQ3 p3: UMGSETTING p4: & |^M
|----
|^M
| Some OS information, which may or may not belong to this error: |^M
| errno 17 File exists |^M
`----
'^M
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job finished with 1 error(s)
/sapmnt/S01/exe/R3load: END OF LOG: 20071123101328
Thanks for your attention
Rgds,
FaustoThis process can't be done in Unicode. Has to be done in Non-UC.
-
When i try to run the mxml individually, It run correctly. As soon as i include it in another mxml using SWFLoader , the components stop working properly. It reflects the data sometime while sometime it doesnt. If i press browser refresh button , the components starts working
again.
here is the code snippet for the mxml where i load another swf file using swf loader.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:views="com.views.*" viewSourceURL="srcview/index.html" styleName="AppBack" height="100%" width="100%" initialize="init()" layout="vertical">
<mx:Style source="assets/css/Main.css" />
<mx:TabNavigator id="tn" height="100%" width="100%" top="-1" right="0" left="0" paddingTop="0" >
<mx:Canvas label="Home" paddingTop="0" paddingLeft="0" paddingRight="0" paddingBottom="0">
<mx:SWFLoader id="loader0" source="AddDeleteAccess.swf" height="100%" width="100%" x="0" y="-15"/>
</mx:Canvas>
</mx:TabNavigator>
</mx:Application>
The Home.swf contains a conbo box and a datagrid.
The combo box stops working sometime and after the browser refresh is click it starts working.
if required i can also paste the code of the file which is being loaded.scale your loader so it fits the way you want. ie, if your loaded swf is 800x600 (with nothing on the back-stage) and you're loading into a 350x375 swf, after loading is complete, use:
loader.width *= 350/800;
loader.height *= 375/600; -
Problems targeting swf loaded with loadClip()
Hi everyone,
I'm having a really weird problem that I hope someone will be able to help me with. I'm using Actionscript 2.0.
Basically, I have a main .swf, into which I am loading another .swf using loadClip(), on the click of a button. It loads into an empty movie clip on the timeline of the main .swf called container_mc. So far so good, this works.
The problem comes when I am trying to control a movie clip that lives on the timeline of the external .swf. This clip has the instance name test_mc, and I'm trying to control it using the reference _level0.container_mc.test_mc. I have also tried just plain old container_mc.test_mc.
Neither of these work, though when I apply a trace to test_mc with Actionscript on the timeline of the external swf (test_mc.onRelease = function () { trace(this); }), it returns the path _level0.container_mc.test_mc (when clicked on after being loaded into the main movie, obviously).
Can anybody give me any ideas as to what is going wrong here? I've attached a couple of files demonstrating the problem I'm having.
Cheers for any assistance!Thanks for confirming that I'm not crazy or stupid in thinking that's what the reference should be (honestly, I was starting to imagine that I must be one of the two), however I definitely only have one each of container_mc and test_mc. I've just tested this by changing the instance names (one at a time) - if there was a duplicate instance with the same name, the code would presumably still work, which it doesn't.
Thanks for the suggestion, though. -
Facing problem while unloading the SWF file in SWF Loader
Facing problem with SWF Loader.
Background:
I've 4 SWF files (demo1.swf, demo1_skin.swf, demo2.swf and demo2_skin.swf).
These swf files are created throgh Adobe Captivate.
Playing demo1_skin, will play the demo1.swf with the controls at the button such as "Play", "Pause", "Stop", "Forward", "Backward" and Seekbar.
Playing demo2_skin, will play the demo2.swf with the controls at the button such as "Play", "Pause", "Stop", "Forward", "Backward" and Seekbar.
Scenario:
1. Clicked on the video1 leaf of the tree. Video1.swf is getting played.
I am able to click on the seek bar to take the video pointer to the desired position. I can drag the seek bar forward and backward also.
2. Clicked on the video2 leaf of the tree. Video2.swf is getting played.
I am not able to click on the seek bar to take the video pointer to the desired position. Also, I am not able to drag the pointer on the seek bar either forward or backward also.
Play, Pause, Stop, Forward, Backward buttons on the skin works properly.
3. If I again, click on the video1 leaf, point 1 observation is found.
4. clicking agian, on video2 leaf, point 2 observation found.
Please suggest.
I tried with Loader also. But, nothing fruitful. Same result, as I am getting from SWF Loader.
Please find the below used code.
dp.xml
<?xml version="1.0" encoding="utf-8"?>
<root>
<gallery label="All">
<file label="video1" src="demo1_skin.swf" />
<file label="video2" src="demo2_skin.swf" />
</gallery>
</root>
Sample1.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" verticalAlign="middle" backgroundColor="white">
<mx:Script>
<![CDATA[
import mx.events.ListEvent;
private function tree_itemClick(event:ListEvent):void {
var t:Tree = event.currentTarget as Tree;
var dataObj:Object = event.itemRenderer.data;
swfLoader.load(null);
if (dataObj.hasOwnProperty("@src")) {
swfLoader.load(dataObj.@src);
]]>
</mx:Script>
<mx:XML id="dp" source="dp.xml" />
<mx:HDividedBox width="100%" height="100%">
<mx:Panel width="200" height="100%">
<mx:Tree id="tree" dataProvider="{dp}" labelField="@label"
showRoot="false" width="100%" height="100%" itemClick="tree_itemClick(event);" />
</mx:Panel>
<mx:Panel id="panel" width="100%" height="100%" backgroundColor="white">
<mx:SWFLoader id="swfLoader" width="100%" height="100%" />
</mx:Panel>
</mx:HDividedBox>
</mx:Application>
log in the console
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\Sample3.swf - 951,034 bytes after decompression
Clicked on the video1 leaf of the tree
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1_skin.swf - 31,309 bytes after decompression
this.getSWFVersion() = 7
contentSWFFullPath = file://C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf - 323,414 bytes after decompression
incrementWait = 1
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
decrementWait = 0
Clicked on the video2 leaf of the tree
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2_skin.swf - 31,311 bytes after decompression
[Unload SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf
this.getSWFVersion() = 7
contentSWFFullPath = file://C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2.swf
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2.swf - 477,273 bytes after decompression
incrementWait = 1
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
decrementWait = 0
Clicked on the video1 leaf of the tree (Again)
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1_skin.swf - 31,309 bytes after decompression
[Unload SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2.swf
this.getSWFVersion() = 7
contentSWFFullPath = file://C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf - 323,414 bytes after decompression
[Unload SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2_skin.swf
incrementWait = 1
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
decrementWait = 0
Clicked on the video2 leaf of the tree (Again)
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2_skin.swf - 31,311 bytes after decompression
[Unload SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1.swf
this.getSWFVersion() = 7
contentSWFFullPath = file://C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2.swf
[SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo2.swf - 477,273 bytes after decompression
incrementWait = 1
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
onLoad m_movie = null
decrementWait = 0
[Unload SWF] C:\Java_Flex_Practice\FlexPractice\Sample\bin-debug\demo1_skin.swfTry calling unloadAndStop() before loading a new swf.
http://livedocs.adobe.com/flex/3/langref/mx/controls/SWFLoader.html#unloadAndStop()
http://livedocs.adobe.com/flex/3/langref/flash/display/Loader.html#unloadAndStop()
Note that unLoadAndStop()is FP10 only. -
Critical performance problem upon bulk load of groups
All (including product development),
I think there are missing indexes in wwsec_flat$ and wwsec_sys_priv$. Anyway, I'd like assistance on fixing the critical performance problems I see, properly. Read on...
During and after bulk load of a few (about 500) users and groups from an external database, it becomes evident that there's a performance problem somewhere. Many of the calls to wwsec_api.addGroupToList took several minutes to finish. Afterwards the machine went 100% CPU just from logging in with the portal30 user (which happens to be group owner for all the groups).
Running SQL trace points in the directions of the following SQL statement:
SELECT ID,PARENT_ID,NAME,TITLE_ID,TITLEIMAGE_ID,ROLLOVERIMAGE_ID,
DESCRIPTION_ID,LAYOUT_ID,STYLE_ID,PAGE_TYPE,CREATED_BY,CREATED_ON,
LAST_MODIFIED_BY,LAST_MODIFIED_ON,PUBLISHED_ON,HAS_BANNER,HAS_FOOTER,
EXPOSURE,SHOW_CHILDREN,IS_PUBLIC,INHERIT_PRIV,IS_READY,EXECUTE_MODE,
CACHE_MODE,CACHE_EXPIRES,TEMPLATE FROM
WWPOB_PAGE$ WHERE ID = :b1
I checked the existing indexes, and see that the following ones are missing (I'm about to test with these, but have not yet done so):
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_FLAT_IX_GROUP_ID"
ON "PORTAL30"."WWSEC_FLAT$"("GROUP_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 160K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_FLAT_IX_PERSON_ID"
ON "PORTAL30"."WWSEC_FLAT$"("PERSON_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 160K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
CREATE UNIQUE INDEX "PORTAL30"."WWSEC_SYS_PRIV_IX_PATCH1"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OWNER", "GRANTEE_GROUP_ID",
"GRANTEE_TYPE", "OWNER", "NAME", "OBJECT_TYPE_NAME")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 80K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING
Note that when I deleted the newly inserted groups, the CPU consumption immediately went down from 100% to some 2-3%.
This behaviour has been observed on a Sun Solaris system, but I think it's the same on NT (I have observed it during the bulk load on my NT laptop, but so far have not had the time to test further.).
Also note: In the call to addGroupToList, I set owner to true for all groups.
Also note: During loading of the groups, I logged a few errors, all of the same type ("PORTAL30.WWSEC_API", line 2075), as follows:
Error: Problem calling addGroupToList for child group'Marketing' (8030), list 'NO_OSL_Usenet'(8017). Reason: java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "PORTAL30.WWSEC_API", line 2075
Please help. If you like, I may supply the tables and the java program that I use. It's fully reproducable.
Thanks,
Erik Hagen (you may call me on +47 90631013)
nullYES!
I have now tested with insertion of the missing indexes. It seems the call to addGroupToList takes just as long time as before, but the result is much better: WITH THE INDEXES DEFINED, THERE IS NO LONGER A PERFORMANCE PROBLEM!! The index definitions that I used are listed below (I added these to the ones that are there in Portal 3.0.8, but I guess some of those could have been deleted).
About the info at http://technet.oracle.com:89/ubb/Forum70/HTML/000894.html: Yes! Thanks! Very interesting, and I guess you found the cause for the error messages and maybe also for the performance problem during bulk load (I'll look into it as soon as possible anbd report what I find.).
Note: I have made a pretty foolproof and automated installation script (or actually, it's part of my Java program), that will let anybody interested recreate the problem. Mail your interest to [email protected].
============================================
CREATE INDEX "PORTAL30"."LDAP_WWSEC_PERS_IX1"
ON "PORTAL30"."WWSEC_PERSON$"("MANAGER")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_IX2
ON PORTAL30.WWSEC_PERSON$('ORGANIZATION')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_PK
ON PORTAL30.WWSEC_PERSON$('ID')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWSEC_PERS_UK
ON PORTAL30.WWSEC_PERSON$('USER_NAME')
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 32K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_UK
ON PORTAL30.WWSEC_FLAT$("GROUP_ID", "PERSON_ID",
"SPONSORING_MEMBER_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_PK
ON PORTAL30.WWSEC_FLAT$("ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX5
ON PORTAL30.WWSEC_FLAT$("GROUP_ID", "PERSON_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX4
ON PORTAL30.WWSEC_FLAT$("SPONSORING_MEMBER_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX3
ON PORTAL30.WWSEC_FLAT$("GROUP_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX PORTAL30.LDAP_WWWSEC_FLAT_IX2
ON PORTAL30.WWSEC_FLAT$("PERSON_ID")
TABLESPACE PORTAL PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 256K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 0 FREELISTS 1);
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX1"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("GRANTEE_GROUP_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX2"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("GRANTEE_USER_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_IX3"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OBJECT_TYPE_NAME", "NAME")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_PK"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 56K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
CREATE INDEX "PORTAL30"."LDAP_WWSEC_SYSP_UK"
ON "PORTAL30"."WWSEC_SYS_PRIV$"("OBJECT_TYPE_NAME",
"NAME", "OWNER", "GRANTEE_TYPE", "GRANTEE_GROUP_ID",
"GRANTEE_USER_ID")
TABLESPACE "PORTAL" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 32K NEXT 88K MINEXTENTS 1 MAXEXTENTS 4096
PCTINCREASE 1 FREELISTS 1)
LOGGING;
==================================
Thanks,
Erik Hagen
null -
Problem with external swf loading
this is the code I'm using that works
onClipEvent(load){
this.loadMovie ("2.swf", "b");}
Text
and when I use another swf to load, it won't work anymore.
Any help would be apreciatedyou can't decrease the total time it takes for you external swfs to load. you can start those swfs loading in the background (while on frame 1, for example) but you need to be careful to preload only 1 swf at a time and not restart its download if it's already been started.
-
Problem During Installation of ECC 6 on Windows 2003
<b><b>Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
</b></b> <b></b>run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich -
Loading and Unloading of swf files in SWF Loader
Hi all,
I have a doubt reg. SWF Loader.
I have created two mxml files A & B.
A. local.mxml
B. SwfSample.mxml
i have two labels and a button in A file and i have set values to those labels and have a method to handle the click event of the button. In B file i have loaded this A file and accessed the labels and methods using SystemManager Component and changed the values of the A file's label and accessed data from A file to B file.
Here comes the problem,
I have two buttons named LoadAgain and Unload
When i click the Unload button, the SWF Loader unloads its content by the method i handled for the Unload button, after that i have clicked on the LoadAgain button to load the same content of A's mxml to the SWF Loader, it loads succesfully,but i was not able to access its Label or Method from the B mxml. Please help me to solve the issue.
local.mxml
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx=http://www.adobe.com/2006/mxml layout="absolute">
<mx:Script>
<![CDATA[
Bindable]
public var varOne:String = "This is a public variable";
public function setVarOne(newText:String):void
varOne = newText;
]]>
</mx:Script>
<mx:Label id="lblOne" text="I am here" x="28" y="88"/>
<mx:Label text="{varOne}" x="166" y="88"/>
<mx:Button label="Nested Button" click="setVarOne('Nested Button Pressed');" x="28" y="114"/>
SwfSample.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx=http://www.adobe.com/2006/mxml layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.managers.SystemManager;
import mx.controls.Label;
Bindable]
public var loadedSM:SystemManager;
private function initNestedAppProps():void
loadedSM = SystemManager(myLoader.content);
public function updateLabel():void
lbl.text = loadedSM.application[
"lblOne"].text;
public function updateNestedLabels():void
loadedSM.application[
"lblOne"].text = "I was just updated" ;
loadedSM.application[
"varOne"] = "I was just updated";
public function updateNestedVarOne():void
local(loadedSM.application).setVarOne(
"Updated varOne");
public function unload():void
myLoader.content.loaderInfo.loader.unload();
public function loadAgain():void
myLoader.load(
"../bin-debug/local.swf");
]]>
</mx:Script>
<mx:Label id="lbl" x="72" y="47"/>
<mx:SWFLoader id="myLoader" width="438" source="../bin-debug/local.swf" creationComplete="initNestedAppProps();" y="73" height="238" x="72" alpha="1.0"/>
<mx:Button label="Update Label Control in Outer Application" click="updateLabel();" x="72" y="319"/>
<mx:Button label="Update Nested Controls" click="updateNestedLabels();" x="72" y="349"/>
<mx:Button label="Update Nested varOne" click="updateNestedVarOne();" x="72" y="379"/>
<mx:Button label="Unload" click="unload();" x="72" y="409"/>
<mx:Button label="Load Again" click="loadAgain();" x="72" y="439"/>
</mx:Application>
Thanks & regards,
Sathish.KcreationComplete only fires once when the SWFLoader is created. Therefore you never reset your variables to point to the new sub-app. On a slow network, creationComplete may fire before the sub-app loads. It is best to use the COMPLETE event.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
An error has occurred during SWF generation.
Hello
We are receiving the error message "An error has occurred during SWF generation. Please contact the file creator or your system administrator" while trying to publish a dashboard to the BO server. But we haven't been able to assure the client what's causing the problem.
Here is some background about the dashboard and the error:
- It does not contain any unsupported formulas.
- It contains about 3,000 rows distributed on different tabs.
The error appears to happen randomly. I have succesfully exported the swf file locally (on my computer) a couple of times. Using the preview button also works sometimes, but when we try tu publish we get the error. We also have other dashboards, and publishing them works fine with them.
I think this might be a resources issue, the computer from which we are trying to publish has 2GB in RAM, and although it doesn't seem to be consuming all memory when trying to publish, it looks pretty close to do so.
I've succesfully deployed the swf file on locally on an other computer that has 8GB in RAM, but it is not in domain, so I cannot publish from there, and due to company's policy we cannot copy the swf files directly to the server.
I'm looking for help on the error, or for an explanation on what does Xcelsius do when generating the swf, for the tests I've run I would say it is a resources problem but I don't have a way to support this.Hi,
You can try to reduce the size and complexity in excel.
Just export your excel to local machine, open and save it again reimport the same excel.
By doing so your excel file size will get reduced. (To see the difference record the size when exported from xcelsius and after saving xls).
One more suggestion is try to reduce the complex formulas. All i can say is replace the Vlookup formulas with Match and Index.
Reduce if more countif() or Sumif() are used.
Last but not least, try to increase flashs buffer size.
Hope this might help you.
If these things are not going to work......... Last option is to increase your machines RAM.
Regards,
AnjaniKumar C.A. -
Strange Error During Page Load in Debug Mode (only) - Please Help!
Hi All,
Data base version: oracle 11g
Apex version: Apex 4.1.1
Webserver: Apache
Need help with how to troubleshoot a Critical problem. The following error only occurs during page load in "Debug" mode. And, only occurs on a specific page within the application. A web page is served-up containing the following message and the application is blocked from running the page. The browser's (IE 8.0) back button must be clicked to proceed outside of "Debug" mode.
"Error occurred while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Debug log follows:
"S H O W: application="2006" page="6" workspace="" request="" session="500549669426301"
Computation point: Before Header
...Perform computation of item: APP_SERVER, type=FUNCTION_BODY
...Performing function body computation
...Execute Statement: declare function x return varchar2 is begin return owa_util.get_cgi_env('SERVER_NAME'); return null; end; begin wwv_flow.g_computation_result_vc := x; end;
......Result = 156.9.122.214
...Session State: Save "APP_SERVER" - saving same value: "156.9.122.214"
Processes - point: BEFORE_HEADER
...Process "GET_POSITION" - Type: PLSQL
...Execute Statement: begin wwv_flow.g_boolean := :F109_POSITION_ID IS NULL and :APP_PAGE_ID != 101; end;
......Result = FALSE
......Skip because condition or authorization evaluates to FALSE
...Process "Get JARS Sifter Log File Record Count" - Type: PLSQL
...Execute Statement: begin DECLARE vcnt NUMBER := 0; BEGIN d('Get JARS Sifter Log File Record Count'); Select count(*) into vcnt From JARS.JARS_SIFTER_LOG Where moveid = to_number(:P6_MOVEID) and sifter_status IN ('F','J'); :F1000_P6_SIFTER_LOG_COUNT := to_char(vcnt); END; end;
Custom: Get JARS Sifter Log File Record Count
...Process "Set PTM Planned Trip Status" - Type: PLSQL
......Skip because condition or authorization evaluates to FALSE
...compatibility mode - do not set mime type
...compatibility mode - do not set additional http headers
...close http header
...metadata, fetch item type settings
...metadata, fetch items
Show page template header
Rendering form open tag and internal values
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6502
......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 3027 ORA-06512: at "APEX_040100.WWV_FLOW", line 7867
...Show Error on Error Page
......Performing rollback
Rendering form open tag and internal values
...Unhandled Error while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small
...Error Backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 2707 ORA-06512: at "APEX_040100.WWV_FLOW_ERROR", line 185
End Page Rendering"
Thanks!
BernardAll,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard -
I have a windows 7 ultimate pc. It is 64 bit and had Itunes running on it. it said i needed to update itunes. (was at 11.1.62). during the load it reported i needed system admin privliges I am in admin acct. it then could not start the mobile device driver.it reported my c++ for visual was bad. i reloaded the c++ libary.
it still would not load. so i removed itunes and dounloaded a freash copy. same problem. I just use itunes to load my ipads and iphone. but this is driving me to wards a different OS.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi all,
I have installed Net weaver IDE in my system.Now i have started my IDE by clicking on the icon. It was shown me a Browse option to select workspace. I have selected default workspace. But it is giving me an error saying :
Problem during startup and check the .log file in the .metadata directory of ur workspace.
when i open the .log file it is showing the errors.....
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 26, 2006 10:21:30.44
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
... 7 more
Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Program Files\SAP\JDT\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1551)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1495)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
at org.eclipse.swt.graphics.Device.init(Device.java:547)
at org.eclipse.swt.widgets.Display.init(Display.java:1316)
at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
... 8 more
!SESSION Aug 26, 2006 10:32:06.10 -
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide C:\j2sdk1.4.2_12\bin\javaw.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600 -data C:\Documents and Settings\javadev0014\Documents\SAP\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
!ENTRY Startup 1 0 Aug 26, 2006 10:32:06.10
!MESSAGE Sap NetWeaver Developer Studio - Build: 200503040130
Sap Internal Installation
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 26, 2006 10:32:10.885
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
... 7 more
Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Program Files\SAP\JDT\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1551)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1495)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
at org.eclipse.swt.graphics.Device.init(Device.java:547)
at org.eclipse.swt.widgets.Display.init(Display.java:1316)
at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
... 8 more
can anyone guide me in this issue.
Thanks&Regards
KiranHi
Try to change the workspace and open it
See this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/55/434e782e2f294ba490eccbc0e5a6fc/frameset.htm
Kind Regards
Mukesh -
It looks like I may have found a bug in the swf loader. Before I submit this problem I want to make sure there is not something I'm missing in my code. I wrote this class to load a tutorial when the user first launches a sub application in a project I'm working on. This is a simplified version of the class that exemplifies the problem. The same methods I use to launch the swf from within an mxml work just fine, but when I externalize the process in this class, I can hear the tutorial, but I get no visual. Is this a bug or am I missing something?
Here is the tutorial launcher class:
package proj.fuego.utils
import flash.events.Event;
import mx.controls.SWFLoader;
import mx.flash.UIMovieClip;
public class TutPlayerSimple extends UIMovieClip
private var gutLoader:SWFLoader;
public function TutPlayerSimple(fullTutorialPath:String)
gutLoader = new SWFLoader();
gutLoader.addEventListener(Event.COMPLETE, addToStage);
gutLoader.load(fullTutorialPath + ".swf");
//addChild(gutLoader);
private function addToStage(evt:Event):void
addChild(evt.target.content);
This is my mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="1024" minHeight="768" applicationComplete="application1_applicationCompleteHandler(event)">
<mx:Script>
<![CDATA[
import mx.controls.SWFLoader;
import mx.events.FlexEvent;
import proj.fuego.utils.TutPlayerSimple;
private var fullTutorialPath:String = "ll_tut";
private var tutPlayer:TutPlayerSimple;
protected function application1_applicationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
var context:LoaderContext = new LoaderContext();
tutPlayer = new TutPlayerSimple(fullTutorialPath);
//context.checkPolicyFile = true;
//gutLoader.loaderContext = context;
trace("Loading Tut:", fullTutorialPath + ".swf");
addChild(tutPlayer);
]]>
</mx:Script>
</mx:Application>That didn't look right. You'll need to addChild SWFLoader. Not sure what will happen if you just try to add its content. There might also be issues putting Flex components inside a UIMovieCip.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui
Maybe you are looking for
-
How do I set the default text in a bound textbox?
How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked? I have the following code (see below), but for some reason it does work when I put the code in the AddNewItem_Click event; however, it does wor
-
i saw that the APPLE TV product can be used with VIMEO videos. can i still access VIMEO videos to my TV with a reg PC or do i have to have an APPLE?
-
External monitor doesnt register in Mavericks
Hi, I recently upgraded to Mavericks OS, but now my computer wont recognize that my external monitor is plugged in. It just shows a grey screen any solutions? Im using a BenQ monitor with an adapter for my laptop Thanks
-
Kmail / Akonadi Problem, not sending mails
Hello, Today I found my KMail unable to send e-mail, while receiving is fine. On clicking "Send", it just hangs, the e-mail is not going in "Outbox", nothing happens at all, and after a while alert box appears: There were problems trying to queue the
-
hi all, The senario is very simple i have linked my workflow with T-code MM02. any changes made in Material Master will need a approval from few users . once the approval ia done. the approvers name will be sent as email to the requester who made t