Problem in copy routine while creating the follow up to Servcie Request
Hi,
I am creating Lead as follow up from Service Request. I have partner functiona called Reporter in Service Request. Now what ever the value is there in Reporter I need to copy it into Contact Person of Lead. However, I am not seeing any method to update the contact person in COPY ROUTINE BADI.
Can you please help me.
Thanks,
Sandeep
hello, in the COPY ROUTINE BADI, you don't need the method special for partner. You can set the parnter of new document by CRMD_ORDER_MAINTAIN.
In the function, you only need the new document guid handle, and the partner guid which you want to set in the document, and partner type.
Similar Messages
-
Terminated by user problem in incomming idoc while creating the sales ord
This is a file to idoc issue.
Idoc basic type: ORDERS03
When an SO is created by an incoming idoc, problem comes with status u201Cterminated by useru201D with 51 status.
When we tried to post this issue in BD87 t.code the document posts with out any issue.
We are not able to create this issue in Quality box as well,
Experts let us know if you have ever faced such problem in user system."Terminated by user" means what it says. Someone has physically interrupted processing of the IDoc. That's all there is to it.
-
We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
State: [1] Stable
Last error: No error
Writer name: 'MSDEWriter'
Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
State: [1] Stable
Last error: No error
Writer name: 'Event Log Writer'
Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
State: [1] Stable
Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting. -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
Problem while creating the Partner Address in CRM
Hi,
We are facing one problem while creating the new address for the Business Partner.
When ever customer wants to change the address : we are following one process : where we are
using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the
corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
contains the old address number.
Because of this , we are getting lots of complaints regarding this.
Can you please help on this ASAP.
Thanks & Regards
Pradeep.Try BAPI_BUPA_ADDRESS_CHANGE for address change followed by BAPI_TRANSACTION_COMMIT . It works.
-
Problem while creating the ARE1
Hi All,
As per the client requirement, have to generate the ARE1 for the export sales process,
In this process while creating the ARE1 (J1IA101) the BED, ECESS, SHECESS values are not displaying inthe screen, if i save without values also the Bond in not updating
*Note: I can able to see only the ECESS% in the ARE1 Screen
Process followed now:
Sales Order
Delivery
Invoice(JEX)
Excise Invoice(J1IIN)
Bond creation
ARE1 Creation
guys, could you plz help me out in the above issues and plz let me know if any other process isthere to create the ARE1
Otherwise plz confirm that is there any NOTE(PATCH) is require to update in SAP
THANKS & REGARDS
Rajasekhar*ISSUE has been resolved. Found the solution from the Forum,,,, Thanks to all who provided the below
Solution as per the forum below:
Plz do few changes and then your ARE-1 and ARE -3 both will work fine. Also the Report bond summary for ARE-1 will get updated
Applied this note J_1I7_USEREXIT_DUTY_IN_EXPORT
In case of ARE 3 Changes for ARE-3
In fn module 'J_1IEX_DEFAULT_EXCISE_DUTY'
before the call fn given below this update has initial in it convert it to 'Y'
IF l_update_cond EQ 'Y'.
*} REPLACE
CALL FUNCTION 'J_1I6_DETERMINE_EXCISE_RATE'
EXPORTING
Go to SE 37
and input
FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
""Local interface:
*" IMPORTING
*" REFERENCE(YVBRK) TYPE VBRK
*" EXPORTING
*" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
*If you do not want the excise duty to be calculated for a particular
*transaction then you need to mark the flag supress_calculation as 'X'
*This flag when left blank will trigger calculation of ED during j1ii
*When it is marked, the ED copied from billing will be left as it is
*{ INSERT VDQK903541 1
SUPPRESS_CALCULATION = 'X'.
*} INSERT
ENDFUNCTION.
Thanks & Regards -
Problems with FL Studio: "Error while creating the ASIO driver."
I'm trying to use ASIO with FL Studio with my SB Live 24-Bit USB sound card. However, whenever I select "Creative ASIO USB" as my output device, I get the message "Insufficient USB Bandwidth. This device will reset to its default ASIO settings.", followed by "Error while creating the ASIO driver."
I've tried unplugging all other USB devices, switching USB ports, using a PCMIA USB 2.0 card, using Monster USB cables; all to no avail. It seems to me that there is plenty of USB bandwidth available but ASIO simply refuses to work.
Here are my laptop's specs (it's ancient but still good enough to run FL Studio):
P4 3.40GHz HT
1024MB PC3200 DDR RAM
SB Live 24-Bit USB sound card
128MB ATI Mobility Radeon 9700
Any suggestions?So I guess no one could help me then?
It's OK, though, because I figured out the problem on my own. I had to change the "Device Control" settings in the Control Panel from 16 to 24-bit. Don't know why this would affect USB bandwidth, but whatever. -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
Problem While creating the related entity DocFlowSet
Hi,
i am trying to create a Business Transaction and attach it to the another transaction.
I am creating the Transaction T1 using the factory methods and I am facing issues while creating the related entity DocFlowSet to attach T1 as a follow on document to T0.
i am using the model DocFlowSingle and passing the parameters like.
ObjKeyA GUID of T0
OBJTYPEA
OBJKEYB GUID of newly created transaction T1
OBJTYPEB
RELKING
RELATEDGUID: GUID of T1
RELATIONID GUID: creating a new 22 character GUID and then assigning it
But still I am not able to create the related entity. Can any one please help me in resolving this.
Thanks,
Ravi GResolved by self
-
I am a little perplexed. The Time Machine does seem to be backing up my data but I continually get the following message displayed on my screen 'Unable to complete backup. An error occurred while creating the backup folder.' I am using a WD My Passport for Mac portable hard disk drive.
Hi Peter,
http://pondini.org/TM/C10.html -
How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine
Please carefully read and also book mark:
Time Machine Troubleshooting
Time Machine FAQs -
I have had a problem since 5th March with Time Machine on my iMac. I have had no problem since I got the computer in October backing up to an iomega HD but now I keep getting a message that "Time Machine could not complete the backup. An error occurred while creating the backup folder". Anyone know how to correct this?
I had the same "Error creating the backup folder" error - many times over.
I went into the Disk Utility, selected the Backup Disk and ran Verify. It checked out OK. But if not, could have run Repair.
Then did a complete shutdown and restart of the iMac and then tried "Backup Now" from the Time Machine icon's menu - it worked fine. -
Have problems creating the following SAPUI5 table
Have problems creating the following SAPUI5 table. Please see attached screenshot.
What have you tried so far?
can sure your code?
thanks
-D -
Getting the following error while creating the model for webdynpro app.
Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalithhi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris -
Time machine is having trouble. This is the error message... Unable to complete backup. An error occurred while creating the backup folder.
Ideas?Reboot the TC.. if that is not enough reboot the whole network.. from off, restart in order.. modem.. TC.. clients 2min gap.
Maybe you are looking for
-
My Time capsule did a backup yesterday in the morning without any problem. All of a sudden, it disconnected from the wireles system last night and the little indicator lamp turned off. It still makes a noice, as if a disc was turning inside. The Time
-
Data Disappears from Line Chart in Preview Mode
Help! Line chart data present in design mode, but disappears when in preview mode. I have a dashboard that I update monthly. Simple line charts. Now, the line chart data is visible while in the design view, but does not show up when in the preview
-
Displaying dynamic variable text in WEBi
Hi I would like to populate data to my dashboard using a Webi report. My datasource is BI query. In this query I have two dynamic variable values where the user needs to enter the starting period & ending period If the user enter starting period as
-
PrP_CS4 Unable to Import MP4
I have just got the GoPro HD and I am trying to import the files but they keep not iporting correctly. They either Import with a weird green screen(not proportionate to any screen res), Import as audio file, Try to import then freezes while importing
-
IMovie/iPhoto download on new mac
I recently bought brand new iMacs. I can't seem to download the iMovie/iPhoto. I can see that it's listed under Top Free section in the app store, but when I try to get it, it says Buy $14.99. I was under the impression this is free for new machines?