Problem in creating program dynamically using FM 'rss_template_instantiate'
hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.
hi everyone,
i need to create the program dynamically using FM 'RSS_TEMPLATE_INSTANTIATE'.
if we create the program using this function module can we see the generated code.
very urgent!!!!!
thanks in advance.
regards,
bharat.
Similar Messages
-
Problem while creating table dynamically using stored procedure
Hi all
When i try to execute the following lines get insufficient privilege error.
FYI: i m able to create table statically.(i.e without using stored procedure)
CREATE OR REPLACE PROCEDURE pcalling IS
str varchar2(60);
BEGIN
str:='create table t15(tno number,tname varchar2(5))';
execute immediate str;
END;
Thanks in advance
Satyahi
SQL> CREATE OR REPLACE PROCEDURE runddl (ddl_in in VARCHAR2)
2 AUTHID CURRENT_USER
3 IS
4 BEGIN
5 EXECUTE IMMEDIATE ddl_in;
6 END;
7 .
SQL> /
Procedure created.AUTHID CURRENT_USER clause before the IS keyword which runddl executes, it should run under the authority of the invoker, or current user not the authority of the definer.
if you omit it then it will no longer will be run if the creator doesnt have privelege to run this ddl regardless invoker has or not.
i hope you got it
Khurram Siddiqui
[email protected] -
Problem in Creating the Product Using COM_PRODUCT_MAINTAIN_MULT_API
Dear CRMExperts,
I am working in SAP CRM 5.0 version.I want to create the Product Using the Function Module "COM_PRODUCT_MAINTAIN_MULT_API".For this i have gone through the SAP Note 810153.I copied the Report Program from that note and i developed the Report Program.but i am facing some problem.
The structures zinstall_info2_maint_t and zinstall_info2_maintain does not exist in SAP CRM 5.0 Version.So i am getting Short Dump.
If anyone come across the same problem.Please help me to solve this issue.Please help me it is very Urgent.
Thanks & Regards,
Ashok.Hi,
Note 1074357 - Implementing rollback in FM COM_PROD_MATERIAL_MAINTAIN_API
Does this help you?
regards,
Murali -
Problem in creating new field using AET
Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo = is_key-ext_bo
ext_bo_part = is_key-ext_bo_part
extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PMHi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode. -
Problem while creating service PO using bapi_po_create1
hi all,
i am getting error :
In case of account assignment, please enter acc. assignment data for item
what does this mean?
please help,,
thanks,
Siddhartha PrakashHi Sid.
I'm having this same problems on creating PO Service. Did you solve it? How did you do that?
I'm using a PR and the Category is 'Y', and I cant find where is the problem.
The tables that I'm passing to the BAPI_PO_CREATE1 are:
POITEM/ POITEMX
POACCOUNT/ POACCOUNTX
POSERVICES
POSRVACCESSVALUES
Please, if you have any idea, let me know!
Tks a lot!
Renata -
Problem in Creating the Transport using Export option on Portal
Hi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
BabuHi All,
We have problem in creating the Transport Packaage using the Portal EXPORT option. Here are the details:
When I tried to create a New Transport package on the Portal, It opens first page asking for the Package name, ID and suffix. After completing the form, when NEXT or Finish button is clicked, the system goes on forever and does not show the next page at all.
This is kind of Urgent as we were not able to transport the objects to QA system
Your help in this reagrd will be well appriciated.
Thanks and regards,
Babu -
Problem while creating WBS elements using LSMW
Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS -
Problem in Creating a view using infotypes PA0001,PA0002,...
Hi,
Can anybody please help me how to create a Maintainence view using PA0001,PA0002,PA0003,PA0006,PA0032.
I tried to create it using se54.
when i use PA0003 as check table, i am not able to create relations with PA0001,PA0002,PA0032,PA0006.
Thanks in Advance.
Vinay.BRYou can create a view using SE11 as mentioned in the previous answer. Once you created, you can use SE16 to display the content of the view table. However, this does not serve much because you can also see the original table using SE16. Unless you want to generate screen dialog so that the view table can be used in SM30. This method can be done while editing the table in SE11. Click on Utilities->Table maintenance generator. However, this will be considered as a repair (modification to SAP standard) and you need repair key.
-
Problem while creating partner link using https URL
Hi,
To create the partnerlink using https URL, I had done the following:
-Imported the self signed certificate into the OraBPELPM_\jdk\jre\lib\security\cacert
-Added following entries in OraBPELPM_1\integration\jdev\jdev\bin\jdev.conf
AddVMOption -Djavax.net.ssl.keyStore=E:\OraBPELPM_1\jdk\jre\lib\security\cacert
AddVMOption -Djavax.net.ssl.keyStorePassword=esbtest123
I am not able to create partner link using URL https://localhost/orabpel/default/ErrorHandlerBPEL/1.0/ErrorHandlerBPEL?wsdl .
Able to create partnerlink using same URL if I replace https with http.
Did I miss any other configuration that needs to done to create partnerlink using https in JDeveloper BPEL Designer.
Thanks,
-VidyaHi,
I too have the same issue. Appriciate if you share some knowledge on this issue.
Thanks
Aravinda -
Problem with creating customer account using TCA Java API
Hi,
I am trying to create customer account using TCA java API. i am getting exception saying PL/SQL numeric error: character to number conversion. but this error raises when calling API method
HzCustAccountV2Pub.createCustAccount.
can any body help me in solving this issue, any clue why this exception raises. i have tested even the code given in TCA API user guide. that code also gets same error.package client;
import java.math.BigDecimal;
import java.sql.Timestamp;
import java.sql.DriverManager;
import java.sql.SQLException;
import oracle.jdbc.driver.OracleConnection;
import oracle.jdbc.driver.OracleCallableStatement;
import oracle.jdbc.driver.OracleTypes;
import oracle.apps.ar.hz.v2api.HzCustAccountV2Pub;
import oracle.apps.ar.hz.v2api.HzPartyV2Pub;
import oracle.apps.ar.hz.v2api.HzCustomerProfileV2Pub;
class CreateCustAccount {
public static void main(String[] args) throws Exception {
HzCustAccountV2Pub.CustAccountRec p_cust_account_rec = new HzCustAccountV2Pub.CustAccountRec();
HzPartyV2Pub.PersonRec p_person_rec = new HzPartyV2Pub.PersonRec();
HzCustomerProfileV2Pub.CustomerProfileRec p_customer_profile_rec = new HzCustomerProfileV2Pub.CustomerProfileRec();
BigDecimal[] x_cust_account_id = new BigDecimal[1];
String[] x_account_number = new String[1];
BigDecimal[] x_party_id = new BigDecimal[1];
String[] x_party_number = new String[1];
BigDecimal[] x_profile_id = new BigDecimal[1];
String[] x_return_status = new String[1];
BigDecimal[] x_msg_count = new BigDecimal[1];
String[] x_msg_data = new String[1];
try
Class.forName ("oracle.jdbc.driver.OracleDriver");
OracleConnection conn = (OracleConnection) DriverManager.getConnection ("jdbc:oracle:thin:@ebiztst.trianz.int:1526:PATCH","apps","apps");
HzCustAccountV2Pub custaccountV2Pub = new HzCustAccountV2Pub();
p_cust_account_rec.account_name = "John Ac";
p_person_rec.person_first_name = "John";
p_person_rec.person_last_name = "Smith";
p_cust_account_rec.created_by_module = "TCA_EXAMPLE";
HzCustAccountV2Pub.createCustAccount(
conn
, "T"
, p_cust_account_rec
, p_person_rec
, p_customer_profile_rec
, "F"
, x_cust_account_id
, x_account_number
, x_party_id
, x_party_number
, x_profile_id
, x_return_status
, x_msg_count
, x_msg_data
System.out.println( "x_return_status = " + x_return_status[0] );
System.out.println( "x_msg_count = " + x_msg_count[0] );
System.out.println( "x_msg_data = " + x_msg_data[0]);
if (x_msg_count[0].intValue() > 1) {
OracleCallableStatement ocs = null;
for (int i=0; i<x_msg_count[0].intValue(); i++) {
ocs = (OracleCallableStatement)conn.prepareCall(
"begin ? := fnd_msg_pub.get( p_encoded => ’F’ ); end;");
ocs.registerOutParameter(1, OracleTypes.VARCHAR);
ocs.execute();
System.out.println((i + 1) + ". " + ocs.getString(1));
conn.close();
} catch (ClassNotFoundException e) {
System.out.println("Driver Not Found: " + e);
} catch (SQLException e) {
System.out.println("SQL Error." + e);
} -
Problem in creating work center using bapi
hai all,
i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
" in table T006 entry is missing " . why it is comming like that.Hi Goutam/Ram,
I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
We are trying to copy Capacities and work center from one plant to other.
Plz send if you any documentation or code. Also send work order creating code.
Thanks in Advance. -
Problem with creating an dynamic internal table with only one field.
Hi,
i create an internal table like this:
FIELD-SYMBOLS: <GT_ITAB> TYPE TABLE,
<GS_ITAB>,
<FS>.
DATA: GT_DATA TYPE REF TO DATA.
DATA: GS_DATA TYPE REF TO DATA.
DATA: TABNAME LIKE DD03L-TABNAME.
DATA: FIELDNAME LIKE DD03L-FIELDNAME.
DATA: TBFDNAM TYPE TBFDNAM VALUE 'LFA1-NAME1'.
SPLIT TBFDNAM AT '-' INTO TABNAME FIELDNAME.
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
ASSIGN GT_DATA->* TO <GT_ITAB>.
CREATE DATA GS_DATA LIKE LINE OF <GT_ITAB>.
ASSIGN GS_DATA->* TO <GS_ITAB>.
SELECT * FROM (TABNAME) INTO CORRESPONDING FIELDS OF TABLE <GT_ITAB>.
BREAK-POINT.
it works OK.
Now i want to create an internal table not like LFA1 but with LFA1-NAME1 Field TBFDNAM.
It's not only LFA1-NAME1 it shell be the value of TBFDNAM.
When i change
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
to
CREATE DATA GT_DATA TYPE TABLE OF ( TBFDNAM).
i get an shortdump.
Any idea?
Regards, DieterHi Dieter,
Your approach is ok, but it will create dynamic table without a structure of NAME1. Only the line type will be suitable (but field name will not exists -> hence the error in the select statement).
In this case you need to create a dynamic table which structure consists of one field named NAME1.
This code is the appropriate one:
" your definitions
DATA: tabname LIKE dd03l-tabname.
DATA: fieldname LIKE dd03l-fieldname.
DATA: tbfdnam TYPE tbfdnam VALUE 'LFA1-NAME1'.
FIELD-SYMBOLS <gt_itab> TYPE table.
"new ones
DATA: it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA: gt_itab TYPE REF TO data.
" get table and fieldname
SPLIT tbfdnam AT '-' INTO tabname fieldname.
" create dynamic table with structure NAME1 (only one field)
it_fcat-fieldname = fieldname.
it_fcat-tabname = tabname.
APPEND it_fcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat[]
IMPORTING
ep_table = gt_itab
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
CHECK sy-subrc = 0.
" dereference table
ASSIGN gt_itab->* TO <gt_itab>.
" insert data only to NAME1 field
SELECT * FROM (tabname) INTO CORRESPONDING FIELDS OF TABLE <gt_itab>.
I checked, this works fine:)
Regards
Marcin -
Problem in creating 1 image using differnt images
Dear Fellows I want to create an image by using different images in byte array format. Images may be transparent or normal images. I want final result in byte array. I am using the following technique which is working fine but the problem with this technique is that it takes too much time to create an image. This is because I am using MediaTraker. If I delete the code of MediaTracker then program have undeterministic behavior i.e, sometimes it create the final image properly and sometimes nothing is displayed in final image.
I need some help from you. If anyone of you know the technique to draw image using different images without using mediaTracker kindly let me know.
Early replies will be appreciated
// here is the sample code which i m using for creating image
byte[] backgroundImage= // read 800 X 600 image from disk and convert it in to byte array
byte[] image1 = // read 200 X 200 image from disk and convert it in to byte array
byte[] transparentImage // read 300 X 300 transparent image from disk and convert it in to byte array
Image img=null;
Frame frame =new Frame();
frame.addNotify();
//creating BufferedImage object to store Final image
BufferedImage requiredImage= new BufferedImage(800,600,BufferedImage.SCALE_SMOOTH);
//get Graphics of BufferedImage created above
Graphics2D g=(Graphics2D) requiredImage.getGraphics();
///// begin draw back ground image
img=Toolkit.getDefaultToolkit().createImage(backgroundImage);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw background starting from x=0, y=0 with 800 X 600 dimentions
g.drawImage(img,0,0,800,600,null);
////////// end draw background image
////////// begin draw image1
img=Toolkit.getDefaultToolkit().createImage(image1);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw image1 starting from x=10, y=10 with 200 X 200 dimentions
g.drawImage(img,10,10,200,200,null);
//////////// end draw image1
//////begin transparentImage
img=Toolkit.getDefaultToolkit().createImage(backData);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw transparentImage starting from x=400, y=0 with 300 X 300 dimentions
g.drawImage(img,400,0,300,300,null);
///end draw transparent image
byte []finalResult = //convert requiredImage into byte array;
you can mail me the solution on my email address [email protected]
thanks with best regards
and waiting for someone to reply
kamran zameeris there anyone on this forum to help me??????
regards,
kamran zameer -
Problem While Creating Physical Standby Using RMAN
Hi Guru's
May be this incidence you all face while creating physical standby DB. I try to create Physical standby database Using RMAN Duplicate Command from one server
(pri machine) to Standby Machine.
The steps i followed to create the above are as follows:
Step 1:- Enable Forced Logging
SQL> ALTER DATABASE FORCE LOGGING;
Step 2:- Configure a Standby Redo Log
SQL> ALTER DATABASE ADD STANDBY LOGFILE GROUP 10
2> ('/oracle/dbs/log1c.rdo','/oracle/dbs/log2c.rdo') SIZE 500M;
Step 3:- Set Primary Database Initialization Parameters
SQL> create pfile='?/dbs/pfileorcl.ora' from spfile;
Edit the pfile to add the standby parameters, here shown:
db_unique_name='orcl'
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl,orcldr)'
LOG_ARCHIVE_DEST_2='SERVICE=orcldr LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcldr'
*.fal_server=orcldr
*.fal_client=orcl
*.standby_file_management=auto
Step 4:- Enable Archiving
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE ARCHIVELOG;
SQL> ALTER DATABASE OPEN;
Step 5:- Setup tnsnames for standby database
This should be done on primary database by altering tnsnames.ora or using NetCA command, and create it by the name orcldr
orcldr =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby-svr)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcldr)
Step 6:- Backup database and copy it to standby
This backup script should be run on primary and copied to standby on the same mount point, running this scripts using RMAN, all files under /rman_backup should be copied to /rman_backup on standby server.
$rman target /
RMAN> run
allocate channel c1 type disk;
allocate channel c2 type disk;
backup database format '/rman_backup/%U';
backup archivelog all format '/rman_backup /%U';
backup current controlfile for standby format '/rman_backup/%U';
Step 7:- Standby Database Steps
Installing Oracle Software
This should be same release and patchset with exactly same ORACLE_HOME mount point.
Setting Up listener
Create and start a listener on standby database using NetCA, or creating listener.ora in $ORACLE_HOME/network/admin
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = standby-svr)(PORT = 1521))
Step 8:- Set Standby Database Initialization Parameters
Copying the pfile created in primary database and renames it to initorcldr.ora, and changes these parameters:
db_unique_name='orcldr'
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcldr,orcl)'
LOG_ARCHIVE_DEST_2='SERVICE=orcl LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl'
*.fal_server=orcl
*.fal_client=orcldr
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
Step 9:- Setup tnsnames for primary database
This should be done on standby database by altering tnsnames.ora or using NetCA command, and create it by the name orcl
orcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = primary-svr)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Step 10:- Copy a Password File
A password file must be created on the Primary and copied over to the Standby site. The sys password must be identical on both sites. Copy orapworcl to $ORACLE_HOME/dbs and rename file to orapworcldr
Step 11:- Create mount points for Oracle
Mount point should be created on standby server with the same convention used in primary, this includes the location for controlfiles, redo logs, datafiles, archive log destination and alert logs.
$ mkdir -p /u01/app/oracle/oradata/orcl/
$ mkdir -p /u01/app/oracle/flash_recovery_area/
$ mkdir -p /u01/app/oracle/admin/orcl/adump
$ mkdir -p /u01/app/oracle/admin/orcl/bdump
$ mkdir -p /u01/app/oracle/admin/orcl/cdump
$ mkdir -p /u01/app/oracle/admin/orcl/udump
Step 12:- Use RMAN to restore backup and setup standby
Connect to RMAN and execute the following command to create standby database, this should be performed on standby server after copying backup and setting tnsnames.
$ export ORACLE_SID=orcldr
$ rman target sys/tiger@orcl auxiliary sys/tiger@orcldr
RMAN> duplicate target database for standby dorecover;
Here i am getting problem as :
While trying to connect to traget database and auxiliary database i notice that when RMAN is connect to both databases it shows
orcl ( DBID xyz)
orcl (not mounted)
Here in my view the second database must be standby database name or auxiiary db name is standby db name which in my case is orcldr
after this issue i am facing the second issues as :
in command
duplicate target database for standby dorecover;
After modifying the command to
RMAN> duplicate target database to "standby";
rman-05520 database name mismatch
Can u please let me know where i am mistakingok for pri:
db_name=orcl
db_unique_name=orcl
for standby:
db_name=orcl
db_unique_name=sbyorcl ( i change orcldr to sbyorcl later)for new testing
but now what i am getting on
Verify connectivity
On Primary Server:
C:\> lsnrctl stop LISTENERI (working fine)
C:\> lsnrctl start LISTENER (working fine)
C:\> tnsping orcl (working fine)
C:\> tnsping sbyorcl (working fine)
C:\> sqlplus sys/xxxxx@orcl (working fine)
C:\> sqlplus sys/xxxxx@sbyorcl (not working fine)
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
On Standby Server:
C:\>lsnrctl stop LISTENER
C:\> lsnrctl start LISTENER
C:\> tnsping orcl
C:\> tnsping sbyorcl
C:\> sqlplus sys/xxxxx@orcl
C:\> sqlplus sys/xxxxx@sbyorcl
My listner file for pri :-
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = ORCL)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.129)(PORT = 1521))
tnsnames.ora file on pri is:
sbyorcl =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.128)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sbyorcl)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.129)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
and listener file on standby :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = orcl)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.128)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
and tnsnames.ora file on standby:
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.128)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
sbyorcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.202.129)(PORT = 1521))
(CONNECT_DATA =
SERVICE_NAME = sbyorcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Kinldy guide me where i am mistaking it's urgent -
Problem while creating logical port using soamanager
Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
KomalPls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful.
Maybe you are looking for
-
Screen flickers while using external display
while using my macbook pro with an external display (my sony LCD TV). the external screen (TV) flickers. it goes black for about a second then comes on. it will happen about 20 minutes into watching TV and happens more often the longer i watch. for e
-
I am looking for a cable or a driver for my 2680s-2 phone. wíndows 7 cannot find any drivers for my phone and no shops have a connecting cable avaible kind regards Niels Andersen Solved! Go to Solution.
-
No mapping for Identity User Name in WS Security X.509 token profile
Hi, I am trying to do interoperability tests with Apache WSS4J and Aqualogic ESB for X509 certificates. I wrote the client and server in the Axis and WSS4J framework. It is worknig fine. When I developed the proxy servcies in Aqualogic ESB with the c
-
How does the LCM rollback feature work in theory?
Hi How does the LCM rollback feature work in theory? Let's say 1. I've Webi report 'x' in QA system 2. I promote a modified version of webi report 'x' from DEV to QA using LCM. So now I've 'x1' in QA. 3. I "rollback" this promotion job in LCM. Which
-
"UNCAUGHT_EXCEPTION" "CX_SDB_ORA_PROGRAM_ERROR
Hi All, I am getting dump "UNCAUGHT_EXCEPTION" "CX_SDB_ORA_PROGRAM_ERROR" while I load data to an ODS object. Can you please help me out. Regards Germán Lopez.