Problem in displaying selection screen of a abap-hr report

Hi,
I have developed a abap-hr report in ver..6.2.I have used logical data base PNP for it.It was working fine.
But when i migrate it into ver.4.6, I can see no selection screen for the report.
How to get the selection-screen?
Please help me through.
Thanks in advance,
Raj.
Edited by: raj b on Feb 20, 2008 8:00 AM

Hi Raj,
Please check whether you have assigned any report category for the PNP selection screen in the version 6.2.
The report category might not exist in the 4.6 version and that might be the reason the selection screen is not appearing.
Cheers,
Aditya

Similar Messages

Problem with the selection screen in submit program

Hi Friends,
i am facing the problem wih the selection screen in submit program. in my Module pool program i am using the submit program statement, When i execute the program , The module program display the submit program selections creen.
I have implemented the code same as below.
submit ztest with tknum =p_tknum and return.
Can you pleaes help me how to avoid the submit program selection screen.
Thanks,
Charan

Hi Charan,
You have to give the selection screen values when you submit a job.
Press F1 on submit and you will see more details.
Here is an example from ABAP Documentation.
Program accessed
REPORT report1.
DATA text(10) TYPE c.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
     DATA: text(10)   TYPE c,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Jovito.

Problem in AT selection screen validation

Hi,
I am having problem in AT SELECTION SCREEN Validation.
I have 2 radiobutton and 6 parameter. if i click first radio button all the 6 radiobutton should enable and take the user input, that is working fine for me.
if i click second radiobutton , out of 6 , 3 parameter should disable and remaining 3 should enable. thats also working fine.
My problem is program has written the validation for this 3 parameter in the AT SELECTION SCREEN.
For first radioutton all the validation working fine, for second validation as soon as i press the radiobutton it will display error message. Based on 2 parameter user is filling value for 3 rd parameter.
I want the same validation to be done for second radio button after user pressing enter.
PARAMETER: p_single RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND f1,
           p_multi RADIOBUTTON GROUP rad1.
PARAMETERS: s_pwwrk LIKE plaf-pwwrk.
PARAMETERS: p_lgort LIKE plaf-lgort.
PARAMETERS: p_kostl LIKE cobl-kostl.
here is my code:
AT SELECTION SCREEN.
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
    MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
    SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
    SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
    IF p_budat0(4) NE marv-lfgja OR p_budat4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
        IF p_budat0(4) NE marv-vmgja OR p_budat4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                            'is closed.
                                        Please try again.'.
        ENDIF.
      ELSE.
        MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                          'is closed.
                                      Please try again.'.
      ENDIF.
    ENDIF.
ENDIF.

For your Case ,
If i understand clearly,You can do the validation when you want on AT SELECTION SCREEN ON WP_FIELD.
If you say your validation to be done only for Selection of Second Radio Button, then..
AT SELECTION SCREEN.
if p_multi eq 'X'. "<- Make Validation to be done only if user select Second Button
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat+0(4) NE marv-lfgja OR p_budat+4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat+0(4) NE marv-vmgja OR p_budat+4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.
endif.

Want to have own selection screen in HR-ABAP report using LDB

Hi experts,
        I am working on HR-ABAP report using LDB pnp and infotypes..But, here we get the built in selection criterion..but I want my own selection screen to be displayed..whats the solution for this??? Is it possible to create my own selection screen instead of default one..and how???
Please help me..its very urgent..

Hi,
chk this out:
Create Report Categories
In this step, you define the report categories and determine the layout
   of the standard selection screen for these report categories. You can
   create report categories for programs or queries that are based on the
   PNP or PNPCE logical databases.
The definition of report categories is divided into two sections:
o   In the Change Report Category view, you define general attributes
       such as sort order, input fields for date, and so on.
o   In the Change Selection Criteria view, you define which selection
       fields of the logical database should be avaliable on the selection
       screen.
Example
You want to set up your system so that your employees can only start
   evaluation reports for Payroll if they use a payroll area. Within a
   payroll area, you should be able to select according to personnel
   number. Additional selection criteria should not be possible and you
   should not be allowed to enter a sort sequence.
Standard settings
The standard system already contains report categories. You can find the
attributes of the report categories in the table.
Note the following five report categories in particular:
o   Report category ' ' is the SAP default report category for
    programs that are based on the PNP logical database.
o   Report category PNPCE is the SAP default category for programs that
    are based on the PNPCE logical database.
o   Report category '00000000' is the customer-specific default category
    for programs that are based on the PNP logical database.
o   Report category '0PNPCE' is the customer-specific default category
    for programs that are based on the PNPCE logical database.
o   Report category __X2001 is the default category for Queries that
    are based on an InfoSet of the PNP LDB.
o   Report category QUEPNPCE is the default category for queries that
    are based on an InfoSet of the PNPCE LDB.
The default report categories are used when a report is called if
    the report has not been assigned a report category.
Parameters and Options for Report Categories of the LDB PNP and PNPCE
Parameters and Options in Screen Area General Data
   If you activate this parameter, you can only enter data on the data
   selection period if you use reports that have been assigned. The
   same date entries are then used for the person selection as for the
   date selection.
o   Matchcode allowed
   If you activate this parameter, you have use of a Matchcode
   pushbutton (search help) if you use reports that have been assigned.
   This pushbutton enables you to perform the person selection.
o   Sort allowed
   If you activate this parameter, you have use of a Sort pushbutton if
   you use report that have been assigned. This pushbutton enables you
   to define a sort order before you execute the report.
o   Organizational structure allowed
   If you activate this parameter, you have use of an Org.Structure
   pushbutton if you use reports that have been assigned. This
   pushbutton enables you to perform the person selection.
   Note:
   For more information about these options, see the online
   documentation under this path:
   SAP Library -> Human Resources -> Reporting in Human Resources
   Management -> Standard HR Reports -> Report Selection Screen in
   Human Resources Management.
Parameters and Options in Screen Areas Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o   Options for data selection period and person selection period (key
    date and so on)
    Here you define which options for date and person selection are
    available for reports that have been assigned.
o   Options for payroll area/period/year
    Here you define which options for selection using payroll
    area/period/year are available for reports that have been assigned.
Parameters and Options in Screen Area Selection View
o   Type/Name
    This parameter enables you to use selection views to define report
    categories. You use the selection view selected here to determine
    which fields are available in the Dynamic Selectionsy.
Note:
    You create selection views for the PNP and PNPCE logical databases
    in the Object Navigator (SE80):
    1. Start the Object Navigator (SE80)
    2. Choose Workbench -> Edit Object.
    3. Choose the More... tab page and the Selection view on this tab
    page.
    4. Choose Create.
    5. In the Create Selection View dialog box, choose the For any
    tables option.
    6. In the Name of view field, enter a name for your selection view.
    7. In the Tables dialog box, enter the name of the table from which
    you want to use fields.
    Note:
    When you enter the table name, observe the naming convention in
    Personnel Administration:
    Infotype number: nnnn -> table name: PAnnnn
    8. Choose Continue.
    9. In the Functional groups area, define functional groups by
    assigning a name and a number.
    10. Assign fields from the selected tables to the functional groups
    by entering the number of the desired functional group in front of
    each field.
    11. Save your entries.
For more information about adjusting the dynamic selections using
your own selection views, see the online documentation under the
following menu path:
SAP Library -> Human Resources -> Reporting in Human Resources
Management -> HR Standard Reports -> Report Selection Screen in
Human Resources Management -> Enhancing the Selection Screen -
Dynamic Selections.
If you do not want to offer dynamic selections, make the following
settings:
-   LDB PNP: In the Selection view field, enter PNP_NO_FREE_SEL.
-   LDB PNPCE: Leave the Selection view field empty.
Parameters and Options in Screen Area Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o   Available input parameters, date or period entry (today, key date,
   all, and so on), and standard value.
   Using the Standard value option, you define which of the selected
   options is shown.
Parameters and Options in Screen Area CE Selection Fields
o   CE selection fields (external person ID, grouping reason, grouping
   value)
   Using the options in this area, you define whether the external
   person Id, grouping reason, or grouping value are available on the
   selection screen.
   Note:
   These parameters are only relevant for you if you implement
   Concurrent Employment (see also note 517071).
Parameters and Options in Screen Area Selection view
o   Dynamic selections as dialog box
    If this switch is set, you can call the dynamic selections as a
    dialog box.
o   Dynamic selections active
    If this switch is set, the dynamic selections of the logical
    database are active at the start of the report.
Note that the following combinations are possible for the last two
    options mentioned:
Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/inactive
    Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/active
    Dyn.Sel. as dialog box/Dyn.Sel. active: active/inactive
Activities
1. Choose Edit -> New entries.
2. Enter an abbreviation and a long text for the report category.
    The customer name range for report categories is 0-9.
3. Select the For the PNPCE logical database checkbox, if you want to
    create a report category for a program or for queries of the PNPCE
    logical database.
4. In the General Data screen area, choose the desired options.
    If you want to use selection IDs, you must have first created and
    grouped selection Ids. The IMG path to do this is given in the
    parameter description section.
5. In the Data selection period/person selection period or Selection
    period screen area, choose the desired options.
6. In the Selection view screen area, choose the desired options.
7. In the CE selection fields screen area, choose the desired (only
    possible for report categories of the LDB PNPCE).
8. Save your entries.
9. Choose the subactivity Permitted selection criteria.
10. Choose Edit -> New entries.
11. In the Select option field, use the input help to select each field
    that should be available on the selection screen.
12. Select the checkbox in the 1.page column, if you want this selection
    field to be available directly when you call the selection screen.
Further notes
13. If you want to copy entries, you still have to enter the selection
    parameters again in the subsequent screen.
o   If you create the report category '000000000', a selection screen is
    generated according to report category '00000000'for all reports for
    which a report category has not explicitly been assigned.
Assign Report Categories
In this step, you assign a report category to your reports.
Example
You have created your own report, for example ZPCTEST1, and would like
    it to have the selection screen that corresponds to that of the
    evaluation report for Payroll, which is assigned to report category
    '__M00001'.
    Assign report category '__M00001' to the report.
Requirements
You must have defined the Report Categories.
Standard settings
SAP Standard Reports:
In the standard system, reports are assigned a report category. If you
    want to override these assignments, perform the activities described
    here. If you want to assign report categories to standard reports using
    SE38, this represents a modification.
Customer-Specific Reports:
For reports you have developed yourself, you can either assign report
    categories by performing the activities described here or directly in SE38.
Recommendation
Only assign a report category if you have created your own reports or if
the selection screens in the standard system do not meet your
requirements.
Activities
1. Choose Edit -> New entries.
2. Perform the required assignment using the Program name and Report
   category fields.
3. Save your entries.
reward if helpful
regards,
madhumitha

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

Problem in displaying selected page items in the title in Graph

Hi There;
I have a problem in displaying selected value of named page item in the graphs.
Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet title and value of selected page item "Location" in my example.
But when I use the same (&WorksheetName &Location) in the title of graph or Axis of the graph, it would show up only the name of the worksheet but not the value of page item "Location", instead it would print "&Location"
Any idea why it is not able to reference the select page item in Discoverer graph? I am using Oracle BI Discoverer 10.1.2.1.
Thanks in Advance,
Regards,
Nidhi Jethoo

Hi Michael;
Thanks a lot. It might not have been considered necessary but you do require, e.g in my case I am plotting Average value of a Parameter and it does make sense in including the name/value of Parameter(surface water temp/bottom watter temp) as an Axis instead of just a constant Parameter or say Average Parameter. So that user can plot the variation of different parameters by changing the page items and when user changes the value of parameter and export the graph he/she has the parameter name(actual value) in the graph.
But I can include all the parameters (&Parameters) or all the page items(using &PageItems) in graph then why not individual page-item and individual parameter.
I would log a SR and see what they say.
Thanks again,
Nidhi

Displaying selection screen as pop-up from dialog box

Hi,
      I have a screen which is of dialog-box type. This dialog screen shows an ALV and has a button in the ALV toolbar. On pressing this button, a pop-up screen is to be displayed. This pop-up screen is designed as a selection-screen. Is it possible to display this selection screen as a pop-up from a dialog box screen?
Regards,
Suhas

Hi Suhas,
Its possible to display selection screen as pop-up from dialog box.....Check the code below...copy paste and execute...
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE text-001.
PARAMETER p.
SELECTION-SCREEN END   OF SCREEN 123.
CALL SELECTION-SCREEN 123 STARTING AT 20 5
                            ENDING AT 80 15.
The below code might help u to add a button in alvgrid's toolbar......
*       CLASS lcl_event_handler DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
    DATA: wa_toolbar   TYPE stb_button,
          calc         TYPE REF   TO cl_gui_frontend_services.
    METHODS : toolbar_handle FOR EVENT toolbar      OF cl_gui_alv_grid
                                    IMPORTING e_object
                                              e_interactive,
              ucomm_handle   FOR EVENT user_command OF cl_gui_alv_grid
                                    IMPORTING e_ucomm.
ENDCLASS.                    "lcl_event_handler DEFINITION
*       CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD toolbar_handle.
    MOVE   3 TO wa_toolbar-butn_type.
    APPEND wa_toolbar   TO e_object->mt_toolbar.
    MOVE : 0            TO wa_toolbar-butn_type,
           'CALC'       TO wa_toolbar-function,
           '@0M@'       TO wa_toolbar-icon,
           'Calculator' TO wa_toolbar-quickinfo.
    APPEND wa_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "toolbar_handle
METHOD ucomm_handle.
    IF e_ucomm = 'CALC'.   " When button added in toolbar is clicked
      IF calc IS INITIAL.
        CREATE OBJECT calc.
      ENDIF.
      CALL METHOD cl_gui_frontend_services=>execute
   EXPORTING
     application            = 'CALC'.
    ENDIF.
ENDMETHOD. "ucomm_handle
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
DATA : container    TYPE REF   TO cl_gui_custom_container,
       grid         TYPE REF   TO cl_gui_alv_grid,
       event        TYPE REF   TO lcl_event_handler,
       it_display   TYPE TABLE OF mara,
       wa_display   TYPE mara.
START-OF-SELECTION.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'BASIC'.
PERFORM build_it_display.
PERFORM create_objects.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN 'EXIT'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN 'CANC'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form build_it_display
*       text
* --> p1        text
* <-- p2        text
FORM build_it_display .
SELECT * FROM mara UP TO 15 ROWS INTO TABLE it_display.
ENDFORM.                    " build_it_display
*&      Form create_objects
*       text
* --> p1        text
* <-- p2        text
FORM create_objects .
IF container IS INITIAL.
    CREATE OBJECT container
    EXPORTING
      container_name     = 'CUSTOM'.
    CREATE OBJECT event.
    CREATE OBJECT grid
      EXPORTING
        i_parent         = container.
    SET HANDLER event->toolbar_handle FOR grid.
    SET HANDLER event->ucomm_handle   FOR grid.
    CALL METHOD grid->set_table_for_first_display
      EXPORTING
        i_structure_name = 'MARA'
      CHANGING
        it_outtab        = it_display.
ENDIF.
ENDFORM.                    " create_objects
Cheers,
Jose.

Is there any option to display selection screen text in bold or big font?

Hi all,
Is there any option to display selection screen text in bold letters or with increase font size?
Thanks n Regards

Hi,
Just give atry in this way..
open the same program ans selection-screen screen no will be 1000 in se51 screen painter,
go to properties of the texts u want to change then go to display tab and check the checkbox bright.
it may or may not work but this will work in module pool .
just give a try...
Regards,
Suresh.

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

FM to display Selection screen on report output??

Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.

Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!!

Saving Selection Screens in Webdynpro Abap

Hi ,
Could you please throw some light on how to save the selection screens in Webdynpro Abap ?? Just like variants in normal Abap?
Thanks and Regards
Alok Sharma

HI,
I dont think there is automatic saving of varients in web dynpros just like normal selection-screen.
Just check this link you might get some idea.
Link[Save Varient|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f028c2b9-1730-2d10-71ae-ce300ea00573?quicklink=index&overridelayout=true]
Regards and Best wishes.

Depndng on chkbox, should display selection screen block on selectionscreen

Hi,
Depending upon the chkbox it should display selection screen block on selection screen.
If not checked it should display B3 and If checked it should display Block B2 .
SELECTION-SCREEN BEGIN OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS P_DAT AS CHECKBOX USER-COMMAND FLAG.
SELECTION-SCREEN COMMENT 3(79) text-112.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-109.
PARAMETER:      p_year1   LIKE ce1rh03-gjahr,
                p_perid1 LIKE ce1rh03-perde.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-109.
PARAMETER:      p_year    LIKE ce1rh03-gjahr MODIF ID MO1,
                         p_period LIKE ce1rh03-perde MODIF ID MO1.
SELECTION-SCREEN END OF BLOCK B3.
If P_Dat is checked     .... It should display the Block B2 and
If p_Dat is not checked .... it should display the Block B3
Any suggestions will be appreciated!
Regards,
Kittu

Hello Kittu,
You can try this code:
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS p_dat AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN COMMENT 3(79) text-112.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-109.
PARAMETER:      p_year1   TYPE gjahr MODIF ID mo1,
                p_perid1 TYPE perio MODIF ID mo1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-110.
PARAMETER:      p_year    TYPE gjahr MODIF ID mo2,
                p_period TYPE perio MODIF ID mo2.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_dat = 'X' AND screen-group1 = 'MO2'.
      screen-active = '0'.
    ELSEIF p_dat <> 'X' AND screen-group1 = 'MO1'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Hope this helps.
BR,
Suhas

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

RE: HR ABAP Multiple selection problem on input selection-screen

hi friends,
I AM Facing one problem in HR abap report selection-screen , in my report employee details data getting based on payroll area
of selection-screen. Here iam SELECTION-SCREEN declarations made in program level NOT created REPORT CATEGORY FOR
PNP LDB.
ACTUAL MY PROBLEM IS IF I SELECT SINGLE PAYROLL AREA IN SELECTION-SCREEN IT GETTING DATA PERFECTLY FOR THAT
PAYROLL AREA
EX. ZA - PAYROLL AREA IF I SELECT IN SELECTION SCREEN IT FETCHING THAT PAYROLL AREA DATA PERFECTLY, PROBLEM
IS IF I SELECT MULTIPLE PAYROLL AREAS IN SELECTION-SCREEN PAYROLL AREA FIELD ZA AND ZB PAYROLLS IT FETCHING
ONLY ZA -PAYROLL DATA ONLY IT IS NOT FETCHING DATA FROM ZB PAYROLL AREA.MY REQUIREMENT IS IT SHOULD FETCH
BOTH PAYROLL DATA AND SHOWING .
HERE IAM GIVING MY SELECTION SCREEN DECLARATION SYNTAX.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
                S_ABKRS FOR P0001-ABKRS NO INTERVALS," NO-EXTENSION,     " PAY ROLL AREA
                S_PERSA FOR P0001-WERKS NO INTERVALS," NO-EXTENSION,     " PERS.AREA
SELECTION-SCREEN END OF BLOCK B2 .
PLEASE Any body knows solution for this selection give me reply.
regards,
gopal

If you are using Logical DB PNP why are you coding Selection Fields for ABKRS and WERKS?   Both of these fields are defined in the PNP Selection Screen and if you use those fields then SAP will handle filtering the data.

Display selection screen details in the header of ALV

hi..
can someone please help me on how to display the data in the selection screen in the header in ALV?
i hope someone can help me..thanks very much..

Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100

Problem in displaying selection screen of a abap-hr report

Similar Messages

Maybe you are looking for