Problem in opening XLF file

Hi,
I had created a dashboad. I am now not able to open the file. Gives an error "Crystal xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of crystal reports". Then gives an error "Problem Accessing Excel: Exiting" and then it throws me out.
I have tried
1. giving 'Full control' to 'everyone' for MS Office.
2. Re-installing Xcelsius
Still it doesn't work.
Note: Other XLF files opens without any problem.
Can anyone suggest solution for this problem?
Thanks & Regards,
RashmiG

Rashmi,
It seems the problem lies with the fact that you are trying to open the xlf created on a higher version product in a lower one. Please check this.
... or there are two instances of excel open in the background, one of which can be killed through the Task Manager.
Otherwise, you can call the support guys and they can check for any other incompatibilities.
Best Luck!!!

Similar Messages

Problem in opening the file

I have a file I have problems in opening the file
The file exists in this link
http://www.multiupload.com/ZOQT6RW8PK
When I open the file shows the following messages
I used All Adobe Reader versions, But no avail
I need a quick solution
Waiting for your reply

You may contact the support of the creator of this plugin.

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

Problems by opening SIM File

Hello,
I have problems to opening SIM Files.
The message that the SAP Tutor Tool display is :
"This tutorial cannot be run by this version of SAP Tutor. To run the tutorial you must licence SAP Tutor"
I can open SIM File direct from SAP, but not self created SIM Files.
Are there anything that I have to heed ?

Hi
you can reach the new par.file
http://<server>:<port no>/irj/servlet/prt/portal/prtroot/<parfile name>.<componentname>
parfile name --> without .par ext.
http://xxx:11111/irj/servlet/prt/portal/prtroot/xxx.yyy

Problem in opening Xcelsius file

Hi,
I had created a dashboard. I am now not able to open the file. Gives an error "Crystal xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of crystal reports". Then gives an error "Problem Accessing Excel: Exiting" and then it throws me out.
I have tried
1. giving 'Full control' to 'everyone' for MS Office.
2. Re-installing Xcelsius
Still it doesn't work.
Note: Other XLF files opens properly.
Can anyone suggest solution for this problem?
Thanks & Regards,
RashmiG

Hi Ingo,
The xCelsius I have is a free trial version which comes from the SAP site. My current version of xcelsius is 5.0.0.99 and Build Number is 12,1,0,247.
As of now I have not installed any SP and/or fixes.
Hope this helps.
Regards,
RashmiG

Problem in opening excel file in different window

hi
i want to open excel file in different window it open in same window properly on the bases of condition but when i try to open in different with window.open( )
it give error that file has already used or path not exist OR requisted site either unavailable
how can i rectified

Hi.
I am too facing the same problem. I am using Jakarta Poi to display my resultset in an excel sheet directly(and not into a jsp)
The browser opens a window showing Open Save Cancel. If i click and save the excel sheet and then open, it opens. But clicking on Open directly doesnt open the excel sheet. Rather it gives the same error
The file name or path name does not exist.
The file you are trying to open is being used by another progrtam . close the document in other program and try again
The name of the work book your tring to save is the same as name of another document that is readonly .try saving workbook with different name
Can somebody please help me fix this problem, since its an urgent requirement. Mail me at [email protected]
Thanks
Hitesh

Problem with opening a file in its application using Runtime

Dear experts,
excuse me for my ignorance, but I am facing a problem and I would really
appreciate some help. I am working on a java program in which I want the user
to have the ability to save the contents of a JTable into a file of his preference (the file could be of any type i.e xls, txt, doc...) and then open this file in its
default application (i.e the txt file through notepad, the xls file through excel etc..).
Everything works fine with the code below, if the filePath does not contain blank spaces. I did some search on the forun and the web, and also tried to
find a solution through the great link
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html but I still
cannot solve the problem. Below I quote the part of the code (actually the actionPerformed dunction of the equivallent button) which is responsible for the opening of the file.
    excelButton.addActionListener(new ActionListener()
       public void actionPerformed(ActionEvent e)
         //saveFileName is the File that I want to open
         String filePath = "\""+saveFileName.toString()+"\"";
         System.out.println(""+filePath);
         try
          String cmd="cmd.exe /C start "+filePath;
          String cmd="cmd.exe /C start C:\\Documents and Settings\\test.xls";
          Process p = Runtime.getRuntime().exec(cmd);
         }catch(IOException ec){}
     });Thank you in advance for your help!
Sincerely yours,
JIM

Dear BillBlalock ,
thank you for answer!! You are very kind and helpful!! I would like to inform everybody that I have finally find another way of soilving my problem and I announce it to the forum in case somebody else encounters the same problem. Well, I soved the nproblem by using the following code:
    excelButton.addActionListener(new ActionListener()
       public void actionPerformed(ActionEvent e)
         String filePath = "\""+saveFileName.toString()+"\"";
         System.out.println(""+filePath);
         try
           String cmd="explorer "+filePath;
           Process p = Runtime.getRuntime().exec(cmd);
         }catch(IOException ec){}
     });I hope it can be useful to somebody!! By this code, I can make a button (in my case the excelButton) to open any file in its default application. Keep up the great work you are doing guys!!

Problem with opening doc. files in pages '09

Hello, can anybody help me, ever since i installed " snow leopard" v10.6.2, pages '09 doesn't open doc. files ( word ) anymore.
Even documents produced in pages en ""saved as" a word document can't be opened again.
Keep receiving pop up whit message " can not be opened"
Yves
Message was edited by: deschutter

You need to manually install the 10.6.2 "Combo" version, there were problems with just using the regular update.
See:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=153&mforum=iworktips ntrick
Peter

Problem with opening PDF files in Google Chrome browser

We have a web page displaying links to dynamically generated PDF files located on the internal repository. This files are not just text PDF files but PDF forms created using XFA technology. This means that they must be opened and filled only in Adobe Reader and not in Foxit Reader or browser's built-in PDF viewer.
Now, the problem is that a Google Chrome browser opens any PDF file using its own PDF viewer. And I want to force this browser to open PDF files in Adobe Reader.
How can I achieve this without disabling 'Chrome PDF Viewer' plugin since I can't do this for all users of our web site?
Any help or advice would be greatly appreciated.
P.S. We use LiveCycle ES3.

Each user would have to set each browser individually.
Note: I don't think it's possible to set the default PDF viewer with code for every user who visits the site.
See the following link to enable Adobe Reader as the default PDF viewer in different browsers:
http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
Note: Not all PDF viewer browser plug-ins support PDF submissions, and most 3rd party viewers may not support forms created with LiveCycle or forms with Extended Reader Rights enabled.

Problem in Opening Excel file

Hi......
I've written a logic for sending mail through FM SO_DOCUMENT_SEND_API1 every thing works fine a get a attachment of the excel file with all the data but when i open the file i get a pop message saying Worksheet setting problem.....and the file does'nt gets open........i'm just wondering what might be the problem.......it was working on well yesterday and now i get this....strange......what might be going wrong........Let me know and correct answers would be surely awarded.........
I use to get a same message for other program's excel file and it still opens the file......but this current excel file seems to be not opening.......

Hi,
Better use 'SO_OBJECT_SEND' FM .
Sample code:
Declaration
DATA:    lwa_hd_change TYPE sood1,
           lt_objcont    TYPE STANDARD TABLE OF soli,
           lwa_objcont   TYPE soli,
           lt_receivers TYPE STANDARD TABLE OF soos1,
           lwa_receivers TYPE soos1 ,
           lt_att_cont   TYPE STANDARD TABLE OF soli,
           lwa_att_cont TYPE soli,
           lt_packing    TYPE STANDARD TABLE OF soxpl,
           lwa_packing   TYPE soxpl,
           lf_sent       TYPE sonv-flag,
           lf_size       TYPE i.
CONSTANTS: lc_obj(11) TYPE c VALUE 'BOMSouthco',
             lc_desc(20) TYPE c VALUE 'BOM Download',
             lc_lang(1) TYPE c VALUE 'E',
             lc_raw(3)   TYPE c VALUE 'RAW',
             lc_net(1)   TYPE c VALUE 'U',
             lc_mail(4) TYPE c VALUE 'MAIL',
             lc_xls(3)   TYPE c VALUE 'XLS',
             lc_ext(3)   TYPE c VALUE 'EXT'.
Passing values to the strutures used in SO_OBJECT_SEND function module
lwa_hd_change-objla      = lc_lang.
lwa_hd_change-objnam     = lc_obj.
lwa_hd_change-objdes     = lc_desc.
lwa_hd_change-objlen     = 255.
lwa_objcont-line = text-t29.
APPEND lwa_objcont TO lt_objcont.
CLEAR lwa_objcont.
lwa_receivers-recextnam = text-t31.
lwa_receivers-recesc     = lc_net.
lwa_receivers-sndart     = lc_mail.
lwa_receivers-sndex      = 'X'.
lwa_receivers-sndpri     = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
lwa_receivers-recextnam = text-t30.
lwa_receivers-recesc     = lc_net.
lwa_receivers-sndart     = lc_mail.
lwa_receivers-sndex      = 'X'.
lwa_receivers-sndpri     = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
Passing values for the attachment file
LOOP AT gt_output INTO gwa_output.
    CONCATENATE gf_lf gwa_output-matnr gf_etb gwa_output-idnrk gf_etb
                gwa_output-type   gf_etb gwa_output-menge   gf_etb
                gwa_output-meins gf_etb gwa_output-comp    gf_etb
      INTO lwa_att_cont-line.
    APPEND lwa_att_cont TO lt_att_cont.
    CLEAR lwa_att_cont.
ENDLOOP.
CHECK lt_att_cont IS NOT INITIAL.
DESCRIBE TABLE lt_att_cont LINES lf_size.
lwa_packing-transf_bin = ' '.
lwa_packing-head_start = 1.
lwa_packing-head_num   = 0.
lwa_packing-body_start = 1.
lwa_packing-body_num   = lf_size.
lwa_packing-file_ext   = lc_xls.
lwa_packing-objlen     = lf_size * 255.
lwa_packing-objtp      = lc_ext.
lwa_packing-objdes     = lc_desc.
lwa_packing-objnam     = lc_obj.
APPEND lwa_packing TO lt_packing.
CLEAR lwa_packing.
CHECK gf_error IS NOT INITIAL. "Check if unix file is written
FM to send email to the intended recipients
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      object_hd_change           = lwa_hd_change
      object_type                = lc_raw
    IMPORTING
      sent_to_all                = lf_sent
    TABLES
      objcont                    = lt_objcont
      receivers                  = lt_receivers
      packing_list               = lt_packing
      att_cont                   = lt_att_cont
    EXCEPTIONS
      active_user_not_exist      = 1
      communication_failure      = 2
      component_not_available    = 3
      folder_not_exist           = 4
      folder_no_authorization    = 5
      forwarder_not_exist        = 6
      note_not_exist             = 7
      object_not_exist           = 8
      object_not_sent            = 9
      object_no_authorization    = 10
      object_type_not_exist      = 11
      operation_no_authorization = 12
      owner_not_exist            = 13
      parameter_error            = 14
      substitute_not_active      = 15
      substitute_not_defined     = 16
      system_failure             = 17
      too_much_receivers         = 18
      user_not_exist             = 19
      originator_not_exist       = 20
      x_error                    = 21
      OTHERS                     = 22.
IF sy-subrc = 0.
    MESSAGE s004 WITH text-t34.
ENDIF.
COMMIT WORK.
Reward if helpful.
Regards,
Ramya

Problem when Opening a file in the Function Moudle

Hi,
I was encountered a Problem , when i am opening a file from the function Module,
But when i tried the same code in the ABAP Editor it was working fine.
Is there any Difference from ABAP Editor & Function Module Editor
(ex : Un-Code Etc ) ...
Let me know if your have any conserns. Thanks In Advance.
Regards
Nag

Hi,
In the FM'S u might have declared the import,export,tables parameters.So u have to use these parameters in the source code editor of FM.If u don't use any of these parameters and try to use any other parameters which also not declared in the FM source code,then u will get the error.pz check the parameters u r using in the FM....
Regards,
Nagaraj

Problem on opening pdf file in IE inline (through streaming method)

Hello
          I had a problem opening pdf file at IE through streaming. I create a page
          that have a hyperlink to open the new window and talk to a serlvet. When
          clicked, this serlvet will stream a pdf file from the file server to serlvet
          output stream. And the pdf file will be displayed within the browser.
          The problem comes that I can see the Acrobat Reader trailer screen display
          but the brower show nothing. I click refresh button to that serlvet to
          reload then it come up the content.
          Is anyone have the same trouble on this and any solution will be
          appreciated.
          Rondy Lee
          State Street Australia Ltd.


Hello Rondy,
          You vae set mime type to application/pdf, which is good. But IE doesn't care
          of it !
          And I think your URL is too long because and I'm sure it leads to a buffer
          overflow (as they say at MS in their bug report).
          So as a workaround, you can rename your servlet mapping from Ecd/Download to
          Ecd/Download.pdf if you can, or make the URL length much more smaller.
          Try to go to MS site to find what is the precise bug#. I can't remember what
          it its number.
          I hope you'll find a solution.
          Dom
          "Rondy Lee" <[email protected]> a écrit dans le message news:
          [email protected]...
          > Thanks Dom, I will try to find it out
          >
          > This is the sample URL I used on local host:
          >
          http://ausyd1-wdev-01:7001/Datalightning/Ecd/Download?EcdId=20&Type=I&OpenMo
          > de=O&OutputType=PDF
          >
          > Also, I set content-deposition to "inline" to enforce IE to open the pdf
          > file. Content Type is application/pdf
          >
          > I hope this can tell more information.
          >
          > Rondy.
          >
          > State Street Australia Ltd.
          >
          > "Dominique Jean-Prost" <[email protected]> wrote in message
          > news:[email protected]...
          > > Hello Rondy.
          > >
          > > I already had problems using servlet streaming a pdf file to IE.
          > > What is the exact URL of your servlet ? IE has a bug : it does not care
          of
          > > the mime content you set up (I guess you made it). It only cares of the
          > > extension of the file it ties to read. In your case, I guess there is no
          > > extension because you're using a servlet. To look for the extension, it
          > > search the last dot in the URL, and it may have a problem it the URL is
          > too
          > > long (buffer overflow...).
          > > So you can map your servlet to an url which has a dot in its name, and
          > make
          > > the URL length smaller.
          > > I can't remember the IE bug #id but, it is official at MS.
          > > I hope this will help you.
          > >
          > > dom
          > >
          > > "Rondy Lee" <[email protected]> a écrit dans le message news:
          > > [email protected]...
          > > > Hello
          > > >
          > > > I had a problem opening pdf file at IE through streaming. I create a
          > page
          > > > that have a hyperlink to open the new window and talk to a serlvet.
          When
          > > > clicked, this serlvet will stream a pdf file from the file server to
          > > serlvet
          > > > output stream. And the pdf file will be displayed within the browser.
          > > >
          > > > The problem comes that I can see the Acrobat Reader trailer screen
          > display
          > > > but the brower show nothing. I click refresh button to that serlvet to
          > > > reload then it come up the content.
          > > >
          > > > Is anyone have the same trouble on this and any solution will be
          > > > appreciated.
          > > >
          > > > Rondy Lee
          > > >
          > > > State Street Australia Ltd.
          > > >
          > > >
          > > >
          > > >
          > > >
          > >
          > >
          >
          >

Problem in opening ".pps" file from jsp

My ".pps" file is on server i want to open this file on client side in microsoft office or inside IE.
But right now all other types of file are opening except ".pps".
small part of that code is
<%
for(int i=0;i<count1;i++) {
%>
<tr align="center">
<td align="left"><a href="<%= filepath[i %">"><font color="black" size="1" face="Verdana"><%= title[i] %></font></a></td>
<td align="left"><font color="black" size="1" face="Verdana"><%= filepath[i] %></font></td>
<td align="left"><font color="black" size="1" face="Verdana"><%= type[i] %></font></td>
</tr>
<%
} %>
i am retrieving the path of the file in "filepath" variable.
Anybody plz help me regarding this. Or any different solution.</a>

I am using plane link to open the file. No streaming is used.OK, then it's certainly a client-side problem. The client simply doesn't recognize the file type and/or it has no application associated with the filetype. No need to worry about it at the server side.
And i don't know how to set accociation on client side. Windows explorer � Tools � Map options � File types.

Problems in Opening Any File in IE 5.5?

The problem is that if you run on IE, what you will see is that when the user clicks on an Excel/Word/any file to open it. The excel file opens directly in the browser. This 'emulation' of excel... in the
browser does not work. In other words, it seems to me that, in Netscape, by default, it uses an "External Viewer" to open files according to the following code (namely, files can be opened completely in a separate window!). The very same code in IE 5.5, however, uses an "Internal Viewer" to open the files (namely, only open inside a frame, not in a separate window. So half way only!). How to fix the code slightly to make it work equally well in IE 5.5?
Thanks millions! The code is attached here.
Helena
function drawFolder(leftSide)
if (browserVersion == 2) {
if (!doc.yPos)
doc.yPos=8
doc.write("<layer id='folder" + this.id + "' top=" + doc.yPos + " visibility=hiden>")
doc.write("<table ")
if (browserVersion == 1)
doc.write(" id='folder" + this.id + "' style='position:block;' ")
doc.write(" border=0 cellspacing=0 cellpadding=0>")
doc.write("<tr><td>")
doc.write(leftSide)
this.outputLink()
doc.write("<img name='folderIcon" + this.id + "' ")
doc.write("src='" + this.iconSrc+"' border=0></a>")
doc.write("</td><td valign=middle nowrap>")
if (USETEXTLINKS)
this.outputLink()
doc.write(this.desc + "</a>")
else
doc.write(this.desc)
doc.write("</td>")
doc.write("</table>")
if (browserVersion == 2) {
doc.write("</layer>")
if (browserVersion == 1) {
this.navObj = doc.all["folder"+this.id]
this.iconImg = doc.all["folderIcon"+this.id]
this.nodeImg = doc.all["nodeIcon"+this.id]
} else if (browserVersion == 2) {
this.navObj = doc.layers["folder"+this.id]
this.iconImg = this.navObj.document.images["folderIcon"+this.id]
this.nodeImg = this.navObj.document.images["nodeIcon"+this.id]
doc.yPos=doc.yPos+this.navObj.clip.height
function outputFolderLink()
if (this.hreference)
doc.write("<a href='" + this.hreference + "' TARGET=\"main\" ")
if (browserVersion > 0)
doc.write("onClick='javascript:clickOnFolder("+this.id+")'")
doc.write(">")
else
doc.write("<a>")
// doc.write("<a href='javascript:clickOnFolder("+this.id+")'>")
}

It's like this:
Nothing you do in the HTML or JavaScript in the browser or on the server will change what the browser does with a given file type. Any browser will do one of 3 things, in this order, with any given file:
1) Determine if the browser can display the file itself, such as for HTML files or certain image types. If so, it displays it.
2) Else, determine if there is a registered plug-in to handle that specific file type. If so, load the plug-in and give it the file.
3) Else, ask the user to save the file or select an external application to view the file, or cancel (don't download).
Using blank as a target for links does nothing to change this behavior. All blank targets do is tell the browser to open a new browser window and "open" the link URL in that new browser window, as opposed to opening in the same window. It still goes thru the same 3 steps, regardless.
Later versions of Excel and Word will, in effect, register as plug-ins for IE, but not for Netscape. Because of this, those file types will open in Excel or Word inside the browser window, as a plug-in. This plug-in mode is still the same as the standalone version of the program. Unless there are settings in Excel or Word to unregister this plug-in mode, then there's nothing you can do. But these settings would not be changeable by the web server or web page, the user would have to change it themselves, if they can/want.
The ONLY other option is to rename the file extension (cuz IE often ignores mime-type and uses extension) and use "application/octet-stream" as the mime-type of the file, from the server. The effect is that the browser will ask the user to save it, where they would have to rename it to the right extension.
My recommended solution:
I'm assuming that foremost, you don't want the user to have to leave the page the links are on. This is why you use the _blank target. This will pass the file or link to a new browser window. Beyond that, you have no other control what happens. Are you assuming/enforcing somehow that all users are using IE, and they have Excel or Word installed in the first place? Or that they are newer versions which even have this plug-in capability. There's no true way to enforce what I think you think you want to do.

Problem with opening PDF files from JSF page using SDO

Hi all,
I'm new with JSF and was attempting to read a PDF file from a Database using SDO and JSF. The code below throws an exception when casting from DataObject to Blob. The getLcDoc() method was created by WSAD when I dragged an SDO relational record onto the JSF page. This method returns an DataObject type which I tried casting to a Blob type before using it further. However, an exception is thrown.
Any feedback is appreciated.
Arv
try {
               FacesContext faces = FacesContext.getCurrentInstance();
               HttpServletResponse response =(HttpServletResponse) faces.getExternalContext().getResponse();
               Blob file= (Blob)getLcDoc().get("ATTACH");
               int iLength = (int)(file.length());
               response.setHeader("Content-type", "application/pdf");
               response.setHeader("Content-Disposition", "inline; filename=Attachment");
               response.setHeader("Expires","0");
               response.setHeader("Cache-Control","must-revalidate, post-check=0, pre-check=0");
               response.setHeader("Pragma","public");
               response.setContentLength(iLength);
               ServletOutputStream os = response.getOutputStream();
               InputStream in = null;
               in = file.getBinaryStream();
               byte buff[] = new byte[1024];
               while (true) {
               int i = in.read(buff);
               if (i<0) break;
               os.write(buff,0,i);
               os.flush();
               os.close();
     } catch(Exception ex){
          System.out.println("Error while reading file : " + ex.getMessage());
     }

Hi...I found out that there is actually no need to use a Blob object at all. You can simply call the OutputStreams write() method and pass the DataObject.getBytes() method that returns a byte[] array. The revised code is shown at the end of this posting.
However, a few other teething problems exist:
1. This works well only if I specify the content type in response.setHeader() method. What if my users upload different types of files, is there a way that the browser opens according to the file type without setting the content type?
2. I still have a problem opening PDF files, even if I specify - response.setHeader("Content-type", "application/pdf");
I get the message - The file is damaged and could not be repaired
3. I would also like this to open the attachment in a new window and using target="_blank" doesn't seem to work as seen below:
<h:commandLink
                                             styleClass="commandLink" id="link1" action="#{pc_DocumentDetailsRead.doLink1Action}" target="_blank">
                                             <h:outputText id="text5" styleClass="outputText"
                                                  value="Click Here"></h:outputText>
                                        </h:commandLink>
------------------------Revised code-----------------------------------------
FacesContext faces = FacesContext.getCurrentInstance();
               HttpServletResponse response =(HttpServletResponse) faces.getExternalContext().getResponse();
               response.setHeader("Content-type", "application/msword");
               response.setHeader("Content-Disposition", "inline; filename=Attachment");
               response.setHeader("Expires","0");
               response.setHeader("Cache-Control","must-revalidate, post-check=0, pre-check=0");
               response.setHeader("Pragma","public");
               ServletOutputStream os = response.getOutputStream();
               os.write(getLcDoc().getBytes("ATTACH"));
               os.flush();
               os.close();

Problem in opening XLF file

Similar Messages

Maybe you are looking for