Problem in picking the same file

Hi guys,
i am picking the file a.txt from FTP server and sending it to the reciever.
now howdo i make sure that the same file is not picked again if by chnace the file exist again by mistake.
please reply guys,
thanks
Sahil

> Hi Sarvesh u r right.
>
> i mean in first attampt "a.txt"; file will be picked up by FTP adapter and will be deleted/archived from source location AND again by mistake if "a.txt"; file comes in source directory then i want to avoide to process the same file again.
>
> is it not possible in xi?
I will not say that it is impossible, because I have a feeling that it can be achieved by using an OS command.
If you see the option under Processing tab in your CC, there you will see "Run OS Command Before Message Processing". So may be you can write a script which will check if the same file is already present in target directory then don't pick the same file from source directory.
At the other hand OS Command theory will fail if the same file was processed but it was deleted from the target directory because in that case script will have no clue to check existance of same file and in that case it will allow the CC to pick the same file again.
Try it and let us know.. (I don't have any experance in writing scripts or using OS command). If you feed difficulties in using OS command then search sdn and for writing an script you can create another thread and ask your question.

Similar Messages

Sender File Adapter picking the same file twice

We are facing a weird issue with File Sender Adapter
We are using PI File Adapter ( NFS ) to read files for a NFS folder and
processing those in PI.Normally it works fine. But for a scenario we
are noticing it sometimes process the same file twice before archiving,
thus duplicating the financial postings.
What we have is :
File Sender Adapter - NFS, Polling interval 60 secs, and Processign
mdoe Archive. File name includes Wildcards - JE_Upload*.txt
what we are noticing is that :
when it picks up a file, it immediately polls again to check for
another file, and sometimes the file is not yet archived so it picks up
and reprocess the same file.
If you see the message below, both belong to the same file, and it
picked up the same file again in 12 secs after processing it the first
time
Successful 02.11.2009 15:01:00 02.11.2009 15:01:01 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Successful 02.11.2009 15:00:49 02.11.2009 15:00:50 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Anyone seen this behavior before?

Hi,
Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
archieve directory.
-Warm Regards,
Gouri

Pick a particular file and keep on target side with the same file name

Hi Guys,
I have got couple of files in a folder. I need to pick only two files, I have setup BPM procedure 2 payloads merge. To keep these merged file with the same source filename.
Source side file Directory
abc_12345_20100408101029.xml (abc_seq number_timestamp.xml)
xxx12345.xml
test.xml
abc_12345_20100408101149.xml
Target Side, How do I keep with the same file name?
abc_12345_20100408111239.xml --- same file name with diffrent timestamp.
One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
Does anybody has got quick idea, any links etc.,
Your quick and positive response will be much appreciates.
Kind Regards
San

Hi,
One more question: How to setup a file adapter to trigger between 2:00am to 5:00 am? in a particular time
For this you can Availability time planning (i.e you can schedule the file adapter to poll for the files with in the time interval i.e 2 -5)...
for generating the file name at target side you need to look for the Dynamic Configuration as you need to change the timestamp for the file..and i am not sure how this works in BPM..
in normal scenarios dynamic configuration will help....
HTH
Rajesh

When opening a filn in illusrtator CC I have memory plroble,. Opening the same file in CS5 does not make problems

When opening a filn in illusrtator CC I have memory plroble,. Opening the same file in CS5 does not make problems.
How can I get in contact with an adobe employee, where I can finally solve my problem with CC (with whom I can send email back and forth or who calls me)... On my PC CC does not work well... I often need to use my old CS5 version.

You have not provided any proper system info, so nobody can even guess.
Mylenium

When I try to open a pages document on my mac book pro it says "The file 'thesis.pages' couldn't be opened." But i can open the same file on my iPad and iPhone without a problem.

When I try to open a pages document on my mac book pro it says "The file 'thesis.pages' couldn't be opened." But i can open the same file on my iPad and iPhone without a problem.

Thanks very much for the instructions. I encountered this problem this morning myself and the recommendation fixed the problem immediately. When things like this happen with iCloud and Pages it makes me wonder if I might be better off using something else, having just recently had to fix the problem that the current Pages can't read documents I created with a much earlier version until they were "upgraded" by an interim version.

Problem with SQL*Loader and different date formats in the same file

DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
System: AIX 5.3.0.0
Hello,
I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
...;2010-12-31;22/11/1932;...
I load this data using the following lines in the control file:
EXECUTIONDATE1 TIMESTAMP NULLIF EXECUTIONDATE1=BLANKS "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
DELDOB TIMESTAMP NULLIF DELDOB=BLANKS "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
The relevant NLS parameters:
NLS_LANGUAGE=FRENCH
NLS_DATE_FORMAT=DD/MM/RR
NLS_DATE_LANGUAGE=FRENCH
If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
How can I get both date values to load correctly?
Thanks!
Sylvain

This is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(

How to read the data file and write into the same file without a temp table

Hi,
I have a requirement as below:
We are running lockbox process for several business, but for a few businesses we have requirement where in we receive a flat file in different format other than how the transmission format is defined.
This is a 10.7 to 11.10 migration. In 10.7 the users are using a custom table into which they are first loading the raw data and writing a pl/sql validation on that and loading it into a new flat file and then running the lockbox process.
But in 11.10 we want to restrict using temp table how can we achieve this.
Can we read the file first and then do validations accordingly and then write to the same file and process the lockbox.
Any inputs are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Hello Gurus,
Let me tell you about my requirement clearly with an example.
Problem:
i am receiving a dat file from bank in below format
105A371273020563007 07030415509174REF3178503 001367423860020015E129045
in this detail 1 record starting from 38th character to next 15 characters is merchant reference number
REF3178503 --- REF denotes it as Sales Order
ACC denotes it as Customer No
INV denotes it as Transaction Number
based on this 15 characters......my validation comes.
If i see REF i need to pick that complete record and then fill that record with the SO details as per my system and then submit the file for lockbox processing.
In 10.7 they created a temporary table into which they are loading the data using a control file....once the data is loaded into the temporary table then they are doing a validation and updating the record exactly as required and then creating one another file and then submitting the file for lockbox processing.
Where as in 11.10 they want to bypass these temporary tables and writing it into a different file.
Can this be handled by writing a pl/sql procedure ??
My findings:
May be i am wrong.......but i think .......if we first get the data into ar_payments_interface_all table and then do the validations and then complete the lockbox process may help.
Any suggestions from Oracle GURUS is highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

Two users opened the same file at the same time with file on Win2K Server

I just had a problem with a file that could not be saved. After a little investigation I discovered that two users had the same file open at the same time. This is with both users using InDesign CS2 and saving to a Windows 2000 Server. Any ideas how this even happened? The only thing I can think of is if they both opened the file at the exact same time but even that I doubt. I guess the more likely possibility is that the user on 10.5 (which we have had a lot of problems with, it's hard to tell how many of them are CS3 problems (yes CS3) and how many are Windows 2003 Server problems) had InDesign CS2 flake out and not tell her the file was open. Has anybody else seen this? The other user was using 10.4. Both computers have the most recent updates for the OS and for their various adobe products.

I have videos on mov file and my quick time player does not play them.
The MOV file container is the generic QT file container. Any audio and video data compatible with the computer system used to create the file can be placed in the MOV file container. Unfortunate, other systems cannot play the file unless they too are configured with the same components as those used to create the file. The normal procedure here is to use the Finder "Info" or alternative media play "Inspector" window to determine what codecs were used to create the original file and, if they are available for your Mac, install them on your system for playback use. Also be advised that some "legacy" codecs may require playback in the QT 7 Player for proper QT support.
I opened with other players, there is no sound. Then I opened the same file on my windows 7, it plays perfectly with the sound and everything? What is the problem?
This would indicate these players either access your QT codec component configuration which does not include the required codec or the app has its own built-in codec support which does not include the required audio codec but you Windows 7 media player is configured with the required codec support. This may incidate the use of a really old codecs that may or may not be available/supported on a Mac any longer.

When saving a File OS Is Creating Multiple Folders With The Same File Name

Not sure what I changed but, now when I save a any file (ppt. word, Keynote,Pages e.g.,) to the desktop or any other location the OS will also create multiple file folders with the same file name as the file I'm saving. Inside the folders are what appears to be files locating the saved files. What can I do to fix this problem?
I'm using the 10.7.2 version
MacBook Pro

Misio wrote:
It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.
it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
check the info panels for the files for full names to verify if this is the case.

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

How can i save differnts data in the same file?

Hi all,
i need some help. I'm working on a project for students an th university. We have to devellop a programm for LEDs measurement so that all the measure data must be save in de same file. We have develloped the programm, but we have a big problem to save the measure in the same File.
When we do the first measure , the file must be created and the fisrt data gonna be save in this file that is correct
When wie do the second measure, the third .... measure, the programm ask us to comfirm the file or where we want save our data
We need some help, to know how we can change or devellop this programm so that, for the first measure , the file must be created and the fisrt data gonna be save in this file, the second measure the same file must be chose and from the third and more the measure data must be automatically save in this file without the programm ask to chose or to confirme a file?
I attach a part off this programmm
Thanks
Attachments:
SR830DSP19.vi ‏212 KB

Move the "File Dialog" where you open your new file out of the while loop. Only pass the refnum inside the loop.

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

File Adapter does not process the same file twice

SOA: 11.1.1.4 (non-HA).
I have a file adapter that triggers when a new file gets to a directory; the file is not deleted after the process triggers.
The process is supposed to call other services via a mediator and if any remote fault happens it should rollback automatically and re-trigger with the same file at the next polling interval.
I have literally 3 scenarios:
1). The file gets picked up once, the process fails and the file is never picked up again.
Msg in log: The file : /xx/xx/xx/abc.xml is being ignored as it has already been processed
2). If the mediator only routes to one service after the file gets picked up, it works as expect (that is rollback and restart at the next polling interval). If it has more than one sequential routing rule, I see the same error as above.
3). File does not get picked up EVEN if I "touch" or rename the file.
Msg in Log:
File Adapter ProcessName Poller enqueuing file for processing :/xx/xx/xx/abc.xml
File Adapter ProcessName Ignoring File : abc.xml as it is already enqued for processing.
I have already checked, there is no permission issue.
This is what my .jca file looks like:
<adapter-config name="getFile" adapter="File Adapter" wsdlLocation="getFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.ScalableFileActivationSpec">
<property name="DeleteFile" value="false"/>
<property name="MinimumAge" value="5"/>
<property name="SingleThreadModel" value="true"/>
<property name="PhysicalDirectory" value="/xx/xx"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="20"/>
<property name="IncludeFiles" value=".*"/>
<property name="UseHeaders" value="true"/>
<property name="MaxRaiseSize" value="5"/>
<property name="ListSorter" value="oracle.tip.adapter.file.inbound.listing.TimestampSorterAscending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
Thanks for looking into it in advance.
Any help with the error messages will be appreciated.

You have to use MOVE operation, if there is any remote exception occured, then move the file to someother folder and again move back to the same folder where the file pickup will start.
In that way you will be use the same file picked up next time when the polling happens.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay

HT3678 If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?

Also i have reinstalled the reader9 two times and tried with reader8 also but in both the cases same problem.
it would be gr8 help if someone can help.

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

Problem in picking the same file

Similar Messages

Maybe you are looking for