Problem in printing the amount in one line in script

Hi friends,
iam facing a problem in scripts
1st line: fifteen lakh thirty th
2nd line : ousand three hundred
instead i need in this way
1st line: fifteen lakh thirty thousand
2nd line : three hundred
ie if the line is not suffienct and if its breaking the word, it should not do that.
it should not break the word it should print in next line.
I dnt want the text in one line..
I want to split when the there is a space before 35 chars in first line
How can i do that.
Regards
Priyanka
Edited by: priyanka jain on Feb 19, 2009 11:10 AM

Hi,
try giving the offset for the line.
refer to this link:
[Offset|http://help.sap.com/saphelp_47x200/HELPDATA/EN/d2/cb3d07455611d189710000e8322d00]/frameset.htm
regards
sarves

Similar Messages

Print the amount in text number in one document

Hi, I have one report in Crystal Report 10 , and i try to convert the amout to show me in text numbers,
this application is to print one check and I need to print the amount in numbers in Text.
I use this formula in my system but for some reason the text Pesos or Dolares this print tow times in my check and this is incorrect.
my question and help is how or what command I need to use in order to only print one time the Label PESOS or DOLARES accordign to the correct curransy.
i use this formula in my system
If strCmp( LTrim({VPHDFT.PRNDES}) , "PESOS" ,1) = 0 Then
UpperCase(towords(fix({VPHDFT.pchkamt}),00)) & " PESOS CON "
& right(totext({VPHDFT.pchkamt}),2) & "/100 M.N "

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Problem with printing the sub totals

Hi,
I am having a problem with smart forms in printing the line items of invoice.
I need to print the sub total of each page and need to display the sub total in the footer, with the caption 'Balance C f/w'. It works fine in some cases.
In some cases, the sub total is getting printed wrongly, because its adding the amount of the next page's first line item also. I checked the form page by printing SFSY-PAGE along with the line item's text. It's observed that, the vlaue of SFSY-PAGE for the first line item's displayed in the second page is '1'. Due to this, the amount for this line item also is getting calculated with the sub total of the previous page.
Could you please suggest a solution for this problem?
Thanks & Regards,
John

Hi,
In smartforms, in the general attributes of the FIRST page the Mode for the page counter should be 'Initialize counter' and for the NEXT page it should be 'Increase counter'.
Please check this in your smartform.
Regards,
Ram

How to print the message in 2 lines?

How to print the message in 2 lines?
Here i am having it like this... MESSAGE i000(zm) WITH lv_uname.
here I want to print lv_uname in 2 lines because it lengthy one.
Thanks,
Sridhar.

No man, itas not comming..I am using the below logic to print my message:
CONCATENATE text-I01 lv_printdate1 text-I02 INTO lv_printname
SEPARATED BY space.
MESSAGE i002(zm) WITH lv_printname.
its printing in a single line...

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

Problem in Printing the ALV list

Hi,
I have one problem with printing the ALV list. While printing the ALV list(thro Print Icon on application Tool bar) ,Fist page of my print out contains some other inforamtion.
inforamtions included two tables
first table contains Sort Criteria, Ascdg, Descnd, Subtotal columns.
And second table contains Data statistics , number of
columns.
But from Second page onwards , my alv list printed correctly .
How can i avoid the First page inforamtion and
what is the Reason of coming like this?
Thanks,
Neptune.M

I assume you are using function module Reuse_alv_grid_display or reuse_alv_list_display for ALV.
If this is the case, there is a parameter called IS_PRINT that you need to supply while calling the function module.
you can for exapmle declare
data:
printstruc type SLIS_PRINT_ALV.
printstruc-NO_PRINT_LISTINFOS = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_PRINT = printstruc
There are many other flags in is_print structures that you can use to manipulate the printing.
Cheers!

I have a Problem in print the long description data through EDI.

I have a Problem in print the long description data through EDI:Actually we want to print the long description data through EDI, but it not handling our huge long description data. Here is the example of that>We can print the first two lines into EDI output, but it is failing to print the below text:
EPSON, TM-U590 Series: Reliable 88 column slip printer. Operator friendly dot matrix impact printing. Ideal for hotel, bank, restaurant and many more applications . Includes: Printer, Black ribbon & a Connect-It Interface. Power Supply & interface cable sold separately. All printers are RoHS compliant & have a standard 1 year depot warranty. 
 -------------------------------------Failing to print this lines------------------------------------------------------------------
COLORS: Epson Cool White (ECW) Only Click links below for helpful Information <table border="0" bordercolor="" style="" width="100%" cellpadding="5" cellspacing="5"><tr><td><CENTER><A HREF="www.sample.com"f.2605" target="_blank">Spec Sheet</a></CENTER></td><td><CENTER><A HREF="www.sample.com"f.2606" target="_blank">MSRP Price List</a></CENTER></td><TD><CENTER><A HREF="www.sample.com"f.2868" target="_blank">Product Information Guide</a></CENTER></TD></TR><TR><td>Warranty Information</td></tr><Tr><td><CENTER><A HREF="www.sample.com"f.2554" target="_blank">Depot Warranty</a></CENTER></td><td><CENTER><A HREF="www.sample.com"f.2555" target="_blank">Spare In the Air Warranty</a></CENTER></td><td></td></tr></table> 
Please provide some useful thoughts on this EDI issue.
Thanks
Ameer

Try using the FM:
ENQUE_READ2
Passing the follwing values:
GNAME --> VBAK (Sales Order header table)
GARG --> The lock argument
 (This will be a combination of client number anb Sales Order No.
 Eg: '3001210000054' where the first three digit i,e 300 is the client No
 and 1210000054 is the sales order no.)
Regards,
Firoz.

Problem with Printing the Billing date...

Hi Experts...
Here im facing the problem in printing the billing date.
The scenario is as follows.
The posting date of Billing is 10.10.2008
The document date of Billing is also 10.10.2008.
At the time of printing the Billing document it is taking another date otherthan 10.10.2008,where it should be 10.10.2008.
What modifications should i do to rectify the problem.
Please advice.
Regards,
Y P.

Prasad,
Ask your ABAPer do debug and find out what date (Table-Field) is used in the Invoice Output program. You will know the reason and if you think that the date being used is incorrect, you can ask your ABAPer to change it to VBRK-FKDAT which is the billing date.
Chandan

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Murray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer).

Writing all the rows in one line but cannot write more than 32767 character

Dear All,
i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
for E.g
Column1 Column2
A B
C D
in the file the output needs to be gone like
A||B||C||D
but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
P_QUERY IN VARCHAR2,
P_SEPARATOR IN VARCHAR2 DEFAULT '',
P_DIR IN VARCHAR2,
P_FILENAME IN VARCHAR2
RETURN NUMBER AUTHID CURRENT_USER
IS
L_OUTPUT UTL_FILE.FILE_TYPE;
L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_COLUMNVALUE VARCHAR2 (4000);
L_STATUS INTEGER;
L_COLCNT NUMBER DEFAULT 0;
L_SEPARATOR VARCHAR2 (10) DEFAULT '';
L_CNT NUMBER DEFAULT 0;
BEGIN
L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
FOR I IN 1 .. 255
LOOP
BEGIN
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
L_COLCNT := I;
EXCEPTION
WHEN OTHERS
THEN
IF (SQLCODE = -1007)
THEN
EXIT;
ELSE
RAISE;
END IF;
END;
END LOOP;
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
LOOP
EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
L_SEPARATOR := '';
FOR I IN 1 .. L_COLCNT
LOOP
DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
L_SEPARATOR := P_SEPARATOR;
UTL_FILE.FFLUSH (L_OUTPUT);
END LOOP;
UTL_FILE.FFLUSH (L_OUTPUT);
L_CNT := L_CNT + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
UTL_FILE.FCLOSE (L_OUTPUT);
RETURN L_CNT;
END CORP_IB_DUMP_FILE;
/

user577300 wrote:
Dear All,
i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
for E.g
Column1 Column2
A B
C D
in the file the output needs to be gone like
A||B||C||D
but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
P_QUERY IN VARCHAR2,
P_SEPARATOR IN VARCHAR2 DEFAULT '',
P_DIR IN VARCHAR2,
P_FILENAME IN VARCHAR2
RETURN NUMBER AUTHID CURRENT_USER
IS
L_OUTPUT UTL_FILE.FILE_TYPE;
L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_COLUMNVALUE VARCHAR2 (4000);
L_STATUS INTEGER;
L_COLCNT NUMBER DEFAULT 0;
L_SEPARATOR VARCHAR2 (10) DEFAULT '';
L_CNT NUMBER DEFAULT 0;
BEGIN
L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
FOR I IN 1 .. 255
LOOP
BEGIN
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
L_COLCNT := I;
EXCEPTION
WHEN OTHERS
THEN
IF (SQLCODE = -1007)
THEN
EXIT;
ELSE
RAISE;
END IF;
END;
END LOOP;
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
LOOP
EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
L_SEPARATOR := '';
FOR I IN 1 .. L_COLCNT
LOOP
DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
L_SEPARATOR := P_SEPARATOR;
UTL_FILE.FFLUSH (L_OUTPUT);
END LOOP;
UTL_FILE.FFLUSH (L_OUTPUT);
L_CNT := L_CNT + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
UTL_FILE.FCLOSE (L_OUTPUT);
RETURN L_CNT;
END CORP_IB_DUMP_FILE;
/Check your logic very carefully. You are using UTL_FILE.PUT() which should not automatically put end-of-line characters i n your file but you are reassigning l_seperator with p_seprator after the first time.
What value are you pasising in as p_seperator?
UTL_FILE.PUT() should allow you to write a string of bytes without newlines as long as its arguments are less than 32K, and you can control when the newlines get written. If your arguments are > 32K can you split them up without writing the newlines until you need to do so? Try something like (untested)
-- UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
 UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE,1,32767));
 UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE),32767*2-1,32767));Edited by: riedelme on Sep 10, 2012 6:11 AM

FB05 - To trnasfer the amounts from one Bank account to another

hi,
My Client is using a Z transaction to transfer the amount from one bank account to another where FB05 is getting triggered.
Because of this a wrong profit center is getting picked up than usual when a specific assignment and text is used. I tried to use the same assignment in development sytem manually but worng profit center didnot get posted as expected. I also checked the 3KEH for the specific GL account but the PC linked there is different from the one which is getting picked up.
Any pointers towards this would be of great help. Thanks a lot in advance.
Regards,
S.Sumana

solved by myself

Problem in printing the selected labels value in smartform-SD_PACKING.....

Dear all,
Iam trying to print the packing list using smarforms,
T.Code - VL74 - After providing the input for the selection screen,
eg. output_type - 0001.
 outbound.deliv - 80000834.
In the "OUTPUT FROM HANDLING UNITS" screen, im getting the list of labels available for that selection.
say for eg.
HU Ob Object key Out. Med Role Name 1 City PkMtT PackMatls
1000004002 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004003 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004005 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004006 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
with the Selection check box attached to the first field, when i
select the first and second HUs, it should be passed to the
driver program, but im getting only one HU value passed into the driver program.
In the driver program my code goes like below,
REPORT ZSDPACKDR LINE-COUNT 100 MESSAGE-ID VV.
TABLES: VBCO3, TVST.
INCLUDE ZPALIDATA_PL.
INCLUDE RVADTABL.
DATA: RETCODE LIKE SY-SUBRC, "Returncode
 XSCREEN(1) TYPE C. "Ausgabe Printer/Screen
Internal table for lips
DATA: lips_wa TYPE lips.
DATA: int_lips LIKE lips_wa OCCURS 0 WITH HEADER LINE.
*& Form ENTRY
 text
 -->RETURN_CODE text
 -->US_SCREEN text
FORM ENTRY USING RETURN_CODE US_SCREEN.
 CLEAR RETCODE.
 XSCREEN = US_SCREEN.
 PERFORM PROCESSING USING XSCREEN.
 IF RETCODE NE 0.
 RETURN_CODE = 1.
 ELSE.
 RETURN_CODE = 0.
 ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING USING PROC_SCREEN.
 PERFORM GET_DATA.
 CHECK RETCODE = 0.
ENDFORM. "PROCESSING
FORM GET_DATA.
REFRESH: LVBPLK, LVBPLA, int_lips.
CLEAR: LVBPLK, LVBPLA, int_lips.
 DATA: FM_NAME TYPE RS38L_FNAM.
 VBCO3-VENUM = NAST-OBJKY. "00000.....
 VBCO3-SPRAS = NAST-SPRAS. "D
 VBCO3-KUNDE = NAST-PARNR. "KUNDE
 VBCO3-PARVW = NAST-PARVW. "WE
 VBCO3-PACKD = 'X'.
 CALL FUNCTION 'SD_PACKING_PRINT_VIEW_SINGLE'
 EXPORTING
 COMWA = VBCO3
 IMPORTING
 VBPLK_WA = LVBPLK
 VBPLA_WA = LVBPLA
 VBADR_TVST = LVBADR "n_916660
 TABLES
 VBPLP_TAB = LVBPLP
 EXCEPTIONS
 SHIPPING_UNIT_NOT_UNIQUE = 1
 SHIPPING_UNIT_NOT_FOUND = 2
 OTHERS = 3.
 IF SY-SUBRC NE 0.
 RETCODE = 1.
 PERFORM PROTOCOL_UPDATE.
 ENDIF.
in the above coding, i used SD_PACKING_PRINT_VIEW_SINGLE', but i tried with SD_PACKING_PRINT_VIEW also, but no values getting loaded in the importing structures. if im doing anything wrong, pls correct me.
*CALL FUNCTION 'SD_PACKING_PRINT_VIEW'
EXPORTING
 COMWA = VBCO3
AUFTRAG_NICHT_LESEN = ' '
EXPORTDATEN_NICHT_LESEN = ' '
IMPORTING
VBPLA_WA =
TABLES
 VBPLK_TAB = LVBPLK
 VBPLP_TAB = LVBPLP
 VBPLS_TAB = LVBPLS
EXCEPTIONS
OBJECT_NOT_FOUND = 1
OTHERS = 2
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
The problem is:
For any of the above function call,
The VBCO3 itself im getting only one label number, hence it is processing for only one, i want to know how to pass on the multiple
label number to this function call ie, in VBC03.
meaning i would like to know, in which internal table , i can get the list of all the selected HUs, so that i shall loop this function call inorder get the appropriate output.
kindly help me to sort this issues.
Points assured.
regs,
Raja

Dear Srihari,
I wrote above code in first label(now i deleted do-enddo) only.
first i am moving seven lebels data into seven wa's.
after that reading the first record and moving another itab(for printing at main window i.e. 8 label).
clearly, there is no space problem..because instead puttting all the required field i put only customer name.
Now it is printing well in first page with 8 labels(main window) also.
But in the second Page it displays only 7 labels and not printing rest of the labels.
for example my itab has 20 records it displays 8 labels in first page &
next 7 labels in second page and not print the rest of the 5 labels i.e. it is not calling third page(?).
code..
CLEAR : WA1, WA2, WA3, WA4, WA5, WA6, WA7.
loop at it_final into wa_final FROM 1 TO 7.
if sy-tabix = '1'.
 wa1 = wa_final.
elseif sy-tabix = '2'.
 wa2 = wa_final.
elseif sy-tabix = '3'.
 wa3 = wa_final.
elseif sy-tabix = '4'.
 wa4 = wa_final.
elseif sy-tabix = '5'.
 wa5 = wa_final.
elseif sy-tabix = '6'.
 wa6 = wa_final.
elseif sy-tabix = '7'.
 wa7 = wa_final.
endif.
endloop.
 delete it_final from 1 to 7.
**Push every 8th row if it_final in it_main
 read table it_final into wa_final index 1. "deleting 8th, 16th,... records
 if sy-subrc = 0.
 append wa_final to it_main.
 else.
 exit.
 endif.
*Delete the rows from it_main which are present in it_final
loop at it_main into wa_final.
 delete table it_final from wa_final. "deleting 8 th row from it_final.
endloop.
Edited by: anurag.radha on Jan 6, 2012 1:09 PM

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

How to Print Multiple Barcode in one line

Hi All,
I am printing barcode using <c1>&lwa_itab-matnr</>. now i have a query i want to print in the same line one more bar code with the values. but i m not able to print it. will any one pls help me out in this how i will print more than one barcode in one line.
i have tried this syntax also
<c1>&lwa_itab-matnr& &lwa_itab-matnr&</>.
But it is not giving gap between two barcode. it is considering space and converting space also in barcode which i don't want. I want to print two barcodes separately with some space. How will i do this.
Pls answer it. it is very urgent.
I am doing this in smartforms.
Thanks
Garima
Edited by: Garima Mittal on Jun 18, 2008 12:34 PM

hi,
try like this.
<c1>field1_</c1>_ <c1>field2_</c1>_
give the two fields in the same line.
so this will help u in printing the barcodes in the same line
please reward me if helpful.
regards,
Reddy.

Problem in Printing the values in SAP Script

Hi,
I have to print the material, description, quantity and value in the invoice.. the problem i face is.. the variables which is of size 40 characters. only prints the data and gets trimmed because of which the data displayed in the invoice not in order.
can any one tell me how to find the length of the variable or is there any way to protect the variable from getting trimmed.
Advance Thanks..
Guhapriyan S

Hi again,
1. what problem are u facing ?
(there is no sapscript symbol / system symbol
   for finding out the length )
(In abap u can use strlen)
2. data and gets trimmed
   what is the meaning of it ?
3. do u mean to say that !
ABCDEF                     123 45
GEF                        123 45
is getting pritned like
ABCDEF 123 45 ?
GEF 123 45
4. If so , then use TABS
5. This happens because SPACE
   is different in different varlues of
   ABCDEF and GEF !
regards,
amit m.
Message was edited by: Amit Mittal

Problem in printing the amount in one line in script

Similar Messages

Maybe you are looking for