Problem in Running a Webdynpro Application Which uses itext.jar

Hi,
I have created a Webdynpro DC which uses a DC called xxx_lib which contains the external JAR Files. (itext.jar etc)
This JAR file is in my library path as well.
I have added the lib_dc as used DC under the webdynpro DC.
The Compilation and build went fine without any error. But when in run the Application Under ---> Content Administration --> Webdynpro , I am getting the following Error.
The initial exception that caused the request to fail, was:
<b>java.lang.NoClassDefFoundError: com/lowagie/text/Element
Failed to create delegate .....
(Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)</b>
Please let me know if somebody knows the solution.
Thanks and Regards,
Sekar

Hi Sekar,
Please look into the link below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7b8180e5-0601-0010-0c94-9bccb92de9c1
Goto section 2.2.3.1 Defining Libraries Page No. 75
It gives you the entire process of creating the library DC and referencing the same in your WebDynpro project.
Hope this helps.
Regards,
Rekha Malavathu

Similar Messages

Problem when running a WebDynpro application

Hi,
Can any one help me in solving this.
I got a problem when running a WebDynpro application Which used to run fine before, when i developed it.
Now i got an error showing,
<b>com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=obtdev4 GROUP=SPACE R3NAME=O20 MSSERV=sapmsO20 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3320' not reached TIME Tue Aug 07 10:06:07 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2</b>
can any one tell me the solution for it.
Thanks in advance,
MrChowdary

Arun,
I had checked for the JCo Connection, tested it I got some error.
But i am unable to understand where exately the problem is as is i already told that it used to work fine with same JCo.
Thanks,
Bharath.

Exception when trying to run an Web Application that uses a Web service

Hello All,
I get an exception when trying to run an Web Application that uses a Web service. The web application is a WebDynpro Application.(an application similar to the one "Using an Email Web Service in Web Dynpro" in the tutorial section of Web Dynpro but using a different web service)
The exception is
<b>Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.</b>
Could anyone give me an idea on what might be the problem ?
Regards,
Loveline.

Hello,
Like you said it was the problem with url.
The webservice I used is actually running on the local machine (where the NetWeaver developer studio is installed); so in the url I had specified localhost. But I deployed the application on another server(SAP J2EE Engine). That is why it didn't work. On changing the url as required, the application is working fine.
Thanks !
Regards,
Loveline.

Creating an application which uses NI-Daqmx driver

Hello,
I'm developing an application which uses NI-Daqmx driver and I need to deliver this application to end users.
I currently have NI-DAQmx 9.7.0 installed on my computer which needed an installation of 1.55 GB.
I got complaints from customers who want this application to run on a new machine without the need of installation of NI-DAQmx driver.
My project contains the necessary dlls (NationalInstruments.Common.dll and NationalInstruments.DAQmx.dll) as referenced and I expect that build of the application along with these dlls work on a different machine somehow.
Is there any way to provide such output that customers don't need to install NI-DAQmx?
Do I have to add additional references to the project? If so, which ones should they be?
Or can I have a smaller custom required installation of this driver which will not bother the customers?
PS: I tried the output of the sample projects on a different machine which don't have NI-DAQmx installed. I got the same error.
Thanks in advance.

Greetings,
You can have them install the DAQmx runtime engine which correlates with the version of DAQmx which is being used in the program you're distributing. This can be found on our website.
Search "daqmx runtime engine x.x" and replace the x.x with your version number.
Regards,
Brandon V.
Applications Engineer
National Instruments

How to run the oracle application cleint using static ip or domain please e

How to run the oracle application cleint using static ip or domain please explain me.
i am not able to run oracle forms in client machine how to run it please explain me
Please give me detail regarding that
any body please help me.
my mail id::::: [email protected]

You did not mention exactly which Forms version you are using so it will be difficult to offer specific help. However, you did mention Forms 9i. ALL "9i" releases were desupported long ago, so find software or documentation are becoming more difficult.
Here is the Deployment Guide for Forms 10.1.2
http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm
Here are some technical reference for Forms 9.0.x
http://www.oracle.com/technology/products/forms/techlisting9i.html

How to get patent of an application which uses opensource technology or platform.

Hi MSDN,
First of all I want to accept that this question is not directly related to the subject line of this forum But since I am an MSDN admirer so I am posting this here.
actually I have created a webapp which uses WEBRTC technology and also some android technology concepts . What I want is to initiate Patent process for my web application. I heard that webRTC and android both are opensource technologies and I can not get
patent by using them (as per my findings ).
So here I need your expert advice for approaching to get my Web application Patent. If you people know about anything related to it or any case study or any such related or nearly related information about getting patent of an application which uses opensource
technology , please share with me . I am hopeful that I will definitely get some good piece of information from you guys which will help me so please reply.
Thanks
Gaurav shukla.
Gaurav shukla

Hello,
First, you do not patent an "application", but an idea or a process. So, if there is an idea or a process which is inovative in your application, THAT is what you are going to patent.
The open source nature of some of the item used by your application has nothing to do with the patent application as your application is just ONE example of embodiment (literally put into a body, of physical form) of your invention.
Your application is also covered by COPYRIGHT. the copyright protects the SOURCE code, as it is written. If you are using existing source code in your application, THEY are also covered by copyright and the license associated with them might force you to
accept some conditions/setup some parameters to the license that you associate to your application. But this is separated from the patent issue.
Cyrille

InvalidPDFHeaderSignature Exception while opening pdf using itext jar

Hi,
I am getting InvalidPDFHeader while opening pdf file using itext jar.
How to overcome this?
Thanks,
Veera

Please continue in your previous thread: Sample code to dynamically append bytes to pdf
Mod: I'm locking up.

Refresh problem of Webdynpro application which is wrapped in a BSP IFrame

I have a BSP Iframe inside which I am calling a webdynpro application ('zwdc_re_replenishment'). The requirement is that this WD application should be reloaded whenever a timeout occurs. Currently, when there is a timeout, an error is shown.
In order to achieve this, for this WD Application , I have a SICF node to which I have attached a customized Errorpage via the option 'Redirect URL'.
Whenever the WD application undergoes a timeout error, my custom error page is called which is named as errorpage.htm. On this page in the 'OnInitialization event', I try to call the WD application URL again (via the following code) which should reload the application. But instead I get a blank page.
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
    application_name = 'zwdc_re_replenishment'
IMPORTING
    out_absolute_url = lv_def_url.
response->redirect( url         = lv_def_url
                    permanently = 1 ).
Just as a note I have already tried out the following methods as well but nothing works
*navigation->exit( lv_def_url ).
*navigation->call_application( lv_def_url ).
Is this because my WD application is inside a BSP Iframe and therefore reloading it manually does not work ?
Please help!
Thanks.
Sukanya

Hi Thomas,
First of all, thanks a lot for replying !!
Sorry for the confusion. Although seems like you have answered my question already.
Actually the requirement for embedding WDA inside a BSP Iframe came up since there are some WD report applications that are accessed by very controlled environments in which the users were not able to close the WDA session directly (without the IFrame) and were getting some errors. Hence the WDAs had to be wrapped inside BSP IFrame which solved the above problem.
I am working with only one BSP app which has the Iframe and one WD app which is called within the BSP app.
Now, the other requirement that came up was that whenever the WDA session inside the BSP IFrame expires, there should be no error page and instead the WD app should be reloaded.
So I was trying to reload the WD App in the following way.
1. For the SICF node of WDA, I attached an errorpage.htm for all the tabs under the tab 'Error Pages'. I have defined this errorpage.htm inside the same BSP App which has got another default.htm page. So the BSP App has 2 views : default.htm which has the IFrame and Errorpage.htm.
2. So now when the WDA expires, the events of errorpage.htm are called like OnInitialization, In this event I was calling the methods navigation->exit( 'URL of the same WDA' ).
I did this because I wanted to reload the WDA whenever it expires. I tried to specify the WDA Url in the SICF node of the same WDA in 'Redirect URL' under the Error Page tabs but it didnot work.
Now I realize this is not gonna work. I didnot want to modify the WDA and so I didnot specify any exit plugs in the WDA which would have taken care of reloading the WDA. But that seems to be the only way out.
Actually speaking there are multiple WDAs which will open inside the same BSP IFrame via their own Application URLs. I have coded the BSP IFrame to read the URL Parameters and open up the corresponding WDA. So now I have to define an exit plug in all of these WDAs.
Do you suggest that this will solve the problem of WDA refresh ? Just to confirm.
Thanks again.

A web developer problem while running a web application

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet </h1>"
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Hello World Web Application</display-name>
<description>Test Servlet</description>
<servlet>
<servlet-name>ServExamp</servlet-name>
<servlet-class>Sai.ServExamp</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ServExamp</servlet-name>
<url-pattern>/Suresh</url-pattern>
</servlet-mapping>
</web-app>
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
1) clicked on deployments, then navigated to "Web Application Modules" .
2) Clicked "Deploy new Web Application Module"
3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.
4) I Clicked that radio button and clicked "Target Module".
5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"
I clicked Deploy.
6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
7)Instead,I added my servlet on to the URL it provided.
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

try a fully qualified path to the pem file

What is the best practice when distributing a desktop application which uses SMO

I have a WPF application which installs a web site. One of the installation steps is to execute a number of SQL scripts which will install website's database. The database server is not necessarily the same machine as the product is installed - in most cases
it's a different server on the same network. All the scripts are generated by a build of database project (visual studio 2012 db project) - hence all of those are in sqlcmd mode.
I can workaround sql variables (:variable - type of creature) by making some simple text replacements. The big problem is with the "GO" statements. At first I thought that I can split the script into many subscripts using a regex split operation
defining "GO" to be the separator - this did not work; having a world Polygon in the script will cause the whole operation to fail. Unfortunately I have no control over the content of the script hence if someone will decide
to put a comment like /* If you do not know how to use this script then GO TO HELL */ would break the installation process.
I have then tried executing the whole script (with "GO" statements) using SMO. This works well on my development machine but once I try to do this on a server, application falls over missing dlls. Now for Microsoft.SqlServer.ConnectionInfo, Microsoft.SqlServer.Smo, Microsoft.SqlServer.SqlClrProvider
and Microsoft.SqlServer.SqlEnum the solution is simple - I can just set "Copy local" to true and those dlls will be distributed with the application.
Big problem is with Microsoft.SqlServer.SqlClrProvider.dll. OK, I can get this library from my local machine - but I am not sure which SQL version this will be used with. I can't include more than one of those dlls as all of those have the same name.
I know that the official MS line is to install SQL feature pack (http://msdn.microsoft.com/en-us/library/ff713979.aspx). But again - I do not know which version of SQL my application will be working with, and I need to make the installation process as simple
as possible.
My question is - is there a way I can distribute a desktop application (which makes a use of SMO) without any prerequisites and for all versions of SQL server? If there is no such a thing then using SMO is pretty much pointless as it cannot be distribute
- even if then it's not version agnostic... Thanks for any help!

I agree with Olaf, when you want to ensure that you can interact with any version of SQL Server.
The problem you will run into if you are not controlling the version of SQL Server is in the version of SMO. If you use SMO version 10.5 and need to deploy using SMO to SQL 2012, it will not work. SMO will always be backward compatible but not forward compatible.
So you would have to have a max version of SQL Server your setup would deploy to in order to control errors and failures. So if you distribute SQL 2012 SMO then the max version would be SQL 2012 for the deploy.
So using a tool that is version agnostic is the way to go, and you can also use in .NET the System.Data.SqlClient to execute statements against the SQL Server as well. This will be version agnostic too.
Ben Miller - SQL Server MVP, SQL MCM 2008 - @DBADuck http://www.dbaduck.com

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

Calling a Webdynpro Application in using WDURLGenerator.getApplicationURL

Hi,
I have to call a webdynpro application in an external window using the application name. Please note that no iViews are created out of the application which i am going to call.
I have DC1 and DC2 and from the Comp Controlller of DC1 , i need to invoke the application in DC2.
String depObjectName =wdComponentAPI.getDeployableObjectPart().getDeployableObjectName();
WDDeployableObjectPart depObjectpart=WDDeployableObject.getDeployableObjectPart(depObjectName,"TestApp",WDDeployableObjectPartType.APPLICATION);
String url = WDURLGenerator.getApplicationURL(depObjectpart) ;
window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(url,"Test View");
window.show();
Is this the correct API to get getDeployableObjectName which is in the different DC.
Please let me know the correct API which i can use to get the getDeployableObjectName and the subsequently the Application which is availbale in the different DC.
Thanks and Regards,
Sekar

Hi Chintan Virani,
Thanks for your reply.
Is it possible to get to know through the APis that the Webdynpro Application Deployed in the server is started.
I hope some API's will be available.I need to open this application only when it is started.
I tried this,
IWDDeployableObject deplObj = WDDeployableObject.getDeployableObject("TestApp");
if ( deplObj.getState() == WDDeployableObjectState.STARTED ) {
// do something
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object TestApp' since it is not a Web Dynpro object. null
Thanks and Regards,
Sekar

Issues while running a WebDynpro Application through portal.

Hi,
I am trying to execute a webdynpro application through portal and facing some issues. I hope to get a significant help from the experts:
> Initially, a report is called from the portal which in turns calls the WebDynpro Application.
> After this, I am again trigerring "FIRE" event in order to go back to report.
At this step, portal shows a message "The Page Can Not be Displayed". Browser link field contains the event name which I am passing to the Fire Event.
Can anybody let me know the root cause for this issue? Below is the piece of code that I am using for navigating from Webdynpro to Report.
        l_sapgui_manager->fire(
          EXPORTING
            name = 'INDI'
        parameters = lt_parameters ).
lt_parameters contains some field values which are required in the report.
Thanks,
Ashish

No Solution

NOTHING_FOUND exception while running a webdynpro application

I have a webdynpro view which has two containers. one of them contains a view with some ui elements and the other is to display an ALV table .
When i run my application, i get a NOTHING_FOUND exception.
is it something in the system or i am doing something wrong? I believe all the mappings are correctly done.
Any pointers??
Another observation : I deleted the external mapping for the DATA node of alv interface controller usage, the exception is no more there....of course the alv is not displayed...i believe it is some issue in the system itself......any help is appreciated
Edited by: Udaya Shankar V on Jul 11, 2008 9:04 AM

can paste the ST22 dump?
Abhi

Problem Creating Project (Flash Builder 4) which uses LiveCycle DS

I have a web app which uses LiveCycle DS 2.6.1, however, when I try to create a new flex project I am getting this error:
Only LiveCycle Data Services 2.6 and higher are supported.
Here are the steps in Flash Builder 4
1. File -> New -> Flex Project
2. Set project name
3. Point folder to existing source code
4. Change "Application server type" to "J2EE"
5. Check the "Use remote object acces service"
6. Select "LiveCycle Data Services ES" radio button
7. Click next
8. Un-check "Use default location for local LiveCycle Data Services server
9. Set "Root Folder" to "C:\tomcat\webapps\myapp"
-- in myapp, I have WEB-INF\flex of course
10. Set root URL and context root
11. Click "Validate Configuration"
This gives me the error: "Only LiveCycle Data Services 2.6 and higher are supported."
Any ideas? How is Flash Builder determining the version of LiveCycle?

Hi Jeremy,
I tried the steps you mentioned and cannot reproduce the problem. You mentioned you are pointing your project location to existing source code. Was there a previous FB project at that location? Was that project using an older version of LCDS before? If you create a new project and point it to a new emoty project location folder (or use default workspace location), do you still see the problem? Any more information you can give me to help reproduce the problem would help.
thanks!
-george

Problem in Running a Webdynpro Application Which uses itext.jar

Similar Messages

Maybe you are looking for