Problem in servlet engine (WLS 7.0) with the chunked transfer

Hi,
          While using jakarta-slide on weblogic 7.0, I encountered the following
          problem while uploading files using WebDAV servlet deployed on WLS:
          "**** This file has a corrupted %%EOF marker, or garbage after the
          %%EOF."
          Is this is a problem with the way that WLS servlet engine is handling
          chunked transfers ?
          According to the change request 084847, "For chunked
          transfer, WebLogic Server was including a hexadecimal number which
          other
          servlet engines used to ignore. This has been fixed WLS 6.1 sp 4."
          Is this fixed in WLS 7.0 ? I could not find this in the resolved bugs
          list for WLS 7 SP1. If this has not been fixed in 7.0, any idea when
          this fix would make it to WLS 7.0 ?
          Any pointers would be of great help.
          Thanks,
          Jeeji.

Similar Messages

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

I am unable to create a new event on my iPhone with IOS 7.0.4. I tap the plus sign, fill in the details, tape Done and ... nothing. Repeatedly. No problem on my iMac or iPad, just with the phone. Help.

Assuming you're creating this event to place in your calendar, and assuming this calendar is shared with your iMac and iPad using iCloud, might the calendar be restricted on your iPhone?
Check Settings > General > Restrictions

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2

Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

New airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....

new airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....
Running on Lion, never had a problem before until the old airport died and I replaced it.

try connecting the device in _*recovery mode*_, then restore from your backup.
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
JGG

Transfer file from Windows PC with the Imac transfer programme . Do I need to activate bootcamp to view files on my new intelMac

I want to transfer files and folders from Windows PC with the Imac transfer programme . Do I need to activate bootcamp to view files on my new intelMac.

in my finder my windows partition show up under devices with the name given to the hd
but because it's ntfs is read only

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Problem in connecting to SAP R/3 with the password

hi ,
i am trying to sap R/3 using java program as follows.
JCO.createClient("200","ALEREMOTE","aleremote","EN","ZEUS","00");
dll file is kept in windows/system32 directory.
when i excecute my program i am getting the following error.
Caught an exception:
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
when i execute my program 3 or more times, the userid "ALEREMOTE" is locking.
I am able to login from SAP GUI.I want to tell you one important point here that when i run my program 3 times the userid is locking. means SAP is able to identify the user but the password is not matching .(i.e is not able to encode the password whatever we are sending from the program).
the same password and username when i give from SAP GUI, it is working please help me out.
i am not getting this error. please help me out in this. i am suffering with this problem since 3 days.youe help will be appreciated
thanks & regards
vasudev

Hi vasu,
Have you tried connecting with another user? If not, first try doing that (for instance with your user). If connection is succesful compare the users. I think this have something to do with the ALEREMOTE user. Might be an authorization issue.
Try with different users (maybe one with SAP_ALL).
regards,
Dion

I am using Ubuntu 10.04, when I am trying to open a java dependent browser i am unable to open the content.There is some problem to load Doc,exl files with the content transfer protocol of the linked browser.

I am working on Ubuntu 10.04,
Whenever I use to access a site which is java based site I am having problem to see the contents.There are several instants while browsing that we clicks a link & it opens a site which is a Ms DOC/EXL file which should get opened after the click & happens with the help of java script.
My problem is that I am unable to open the sites which is related to content transfer protocol of DOC/EXL
Plz do help.
Regards
Srijan

Hi Grace,
The free app MPEG Streamclip may be able to convert the file to a more suitable format. It can be downloaded from the developer's site here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Here's a User Tip by AppleMan1958 that provides some more information about MPEG Streamclip (it's about importing homemade DVDs, but similar principles apply):
https://discussions.apple.com/docs/DOC-3951
John

Error "printhead problem please use setup cartidge that came with the printer"

Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...", then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible by printer but when i use the black then it says "properly not installed, missing cartidge".
So please tell me do i need to purchase a new black cartidge, will it work? or what shoud i do ?
cartidge NO- 685
Thanks
Nirmal

Hi @nirmal007,
Welcome to the HP Support Forum! I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer. I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue.
I recommend you try the following steps before you consider purchasing a new black ink cartridge. Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
Secondly:
Make sure that the ink cartridges are properly vented and seated correctly
If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
Open the cartridge access door. The carriage moves to the access area.
Figure : Open the cartridge access door
Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
Figure : Remove the cartridge from the slot
Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
Figure : Vent area on the top of the cartridge
If the cartridge still has the orange pull-tab attached, pull to remove it.
Figure : Orange pull tab
If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
Figure : Clean the clogged vent with a pin
Clogged vent
With a straight pin, gently remove excess adhesive from the vent
Unclogged vent
With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
Figure : Reinsert the cartridge
Repeat these steps to inspect the vents on each of the cartridges.
Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
Close the cartridge access door.
Figure : Close the cartridge access door
Source
Thirdly, try cleaning your cartridge contacts:
Manually cleaning the print cartridge contacts
Follow the steps below to manually clean the print cartridge contacts:
Gather the following items to clean the contacts:
Distilled water (tap water may contain contaminants that can damage the print cartridge)
Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
Open the print cartridge door.
Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
caution:
Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
Gently wipe the copper-colored contacts with the cotton swab.
caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
Insert the print cartridge in the printer, and then close the print cartridge door.
Source
If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one. Let me know if this helps. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Is any one else having problems converting audio books in WMA format with the new v5

Is any one having trouble with audio books in WMA formatting converting with the new ios v5

Since updating to OS5 in my itouch I have lost all my library audio books. I have downloaded a couple of new library audio books. The books look like they are being loaded into my itouch but are not there. The only way I can access them is to make a playlist for each book and drag the numbered files into the playlist folder. There are a lot of problems with this method - book chapters are not in order (I have to tried to reorder them without success) and if I stop listening to a book, when it starts again it starts at the beginning of the chapter. Before OS5 I had no trouble with WMA files or anything for that matter. I hope there is a solution soon.

Same old problem Norton Toolbar Extension does not work with the latest Firefox 5 .

When will norton have a update.

That Site Advisor add-on duplicates features that are built into Firefox. <br />
http://www.mozilla.com/en-US/firefox/phishing-protection/
That said the Site Advisor 3.3.1 is blocklisted by Mozilla due to the Site Advisor extension being the #2 cause of crashing the Firefox 5.0 betas. McAfee was notified of the problem long before that extension was added to the blocklist. Now it is up to them to fix it. <br /> https://addons.mozilla.org/en-US/firefox/blocked/
I have heard that SiteAdvisor 3.4 is now available, which should fix all FireFox 5.0 issues. It is available from siteadvisor.com . Not sure why McAfee isn't doing an automatic update for their users.

Interface failure with the error : Transfer to Process Engine

Hello All,
We are receiving 2 messages for one SiteMaster idoc triggerred from SAP ECC. Its a BPE scenario.
1. We are not sure why we are getting 2 entries in SXMB_MONI.
2. 1 of the message status shows Successful Flag but its queue id : XBQO$PE_WS95000004 is in failed state in SMQ2. We have tried Execute LUW and its not working, hence we have given Save LUW and saved it SMQ3.
3. The second entry shows the status as 'Transfer to Process Engine' with a proper queue id.
Attached the screenshots. Kindly check. Thanks in advance.
Regards,
KarthiSP

ANy how if you want to delete those BPM runtime instance you can do so by deleting the logical instance of the BPM instance
go to SXMB_MONI and click on PE which got stuck and it will take you PE engine go to list technical options and chose workflow log option and then chose delete logical instance option
/people/michal.krawczyk2/blog/2009/03/18/xipi-bpe-admin--logical-deletion-of-a-process-instance
Rajesh

I need help with the license transfer

I need help getting find cut pro x back its saying I have to buy it over when I have already bought it

… and to clarify what Andy said: the only legal way to purchase FCPX is via your AppleID + Appstore; so, if someone sold you a Mac coming pre-installed with FCPX - that is not optional, and wasn't legal (except with a new device from Apple).
Then, indeed, YOU have to purchase it.
Again.

Anybody familiar with the TUNE TRANSFER for Ipod program?

This software product was created by Valu-Soft. It was designed to recover music files from iPod to a NEW PC. However, it appears that this program does not work with a PC that has already iTunes library. Are there any shortcuts or commands to circumvent this condition?

Well... it isn't really a data format. A device driver (which includes a printer driver) provides a number of callbacks which correspond to the graphical calls made by a printing program. (At least, that's how it was when I looked into it a very long time ago). A driver might be asked to draw lines or boxes, to output text with particular fonts and attributes, or to accept a variety of raster graphics. This is something for an experienced programmer, or team, already very familiar with Windows graphic models such as GDI: device drivers are not easy to develop or debug, and because they run with special privileges; bugs in them have the potential to completely crash the system (blue screen of death) (although I read of something called "user mode drivers" which might be safer).
http://msdn.microsoft.com/en-us/library/windows/hardware/gg463348.aspx is a place where some of this seems to be discussed. I don't know whether you have to sign up with Microsoft. You might, because recent OSs will only install signed drivers.
Updated: if you still want to make a PDF, this is an enormous task, so big that Adobe dropped the two drivers they once had. Adobe don't even write the Adobe PDF driver. Rather, they use the operating system's PostScript driver, then convert PostScript to PDF using Distiller, a tool they conveniently already had. Adobe provide what I think is called a "print monitor" (?) that takes the output from the driver once it is fully formatted. If you can process PostScript you could do the same. (Note: a PostScript interpreter from scratch is a considerably larger task than a print driver, so that isn't an easy option; look at 5-10 person years if the people are sufficiently skilled).

Problem in servlet engine (WLS 7.0) with the chunked transfer

Similar Messages

Maybe you are looking for