Problem in Smartforms Printing two internal tables
Dear ABAPers,
I am working in SAP Smartforms.
I am passing two internal tables in Main Window one after another.After Printing the Data in the first internal Table.It prints the data in the Second internal table.My requirement is it should print from the Next Page.
It is very Urgent Requirement.Please help me to solve this problem.
Thanks & Regards,
Ashok.
Hi,
Create a new page in your form in one page put one internal table and in the second page put the other.
->in each page in the page attributes select the nextpage = same page name
-> After the loop of the first internal table in first page
->create a command node and select the checkbox goto newpage and select the second page in the dropbox.
Thanks,
NN.
Similar Messages
-
Print long internal table in smartform, error SSFCOMPOSER250
Hi experts,
In VL03N i'm getting this error SSFCOMPOSER250 (Table row is larger than 176 cm) when printing a long internal table containing item's serial numbers. The item has 1000 serial numbers, and they are passed to the smartform in an internal table. I tried to separate in different rows, each one with 200 serial numbers but when printing the 3rd block the message appears again.
Is it possible to print this table in the smartofrm ??
thanks in advance,
MaríaI used SERIAL_LS_PRINT to get the serial numbers and then PROCESS_SERIALS_FOR_PRINT and got this:
( 768790876 - 768791875 )
But I need to print all the serial numbers, not an interval.. -
Regarding Passing two internal Tables from Driver Program to Smartform
hi all,
I am Passing Two Internal Tables from Driver Program to Smartform it is going to dump and message is showing like this " one of the parameters eded according to the interface description was not specified ".
When i am passing one Internal Table Output is coming Perfectly. Is there any restriction for passing of internal tables.
Regards
RamiHI,
Check the names specified in the smartfrom and FM whcih you are calling in the driver program. Both might be different.... -
How to check two internal table fields
Hi all,
I need to check two internal table fields are equal or not means which statement i can use.
Not internal table ,table contents i need to check i.e
it1-pernr = it2-pernr.
like this
if i put loop it'll check one table field for one loop.
if i put two loop means some fields reflecting 2 in it1 then it'll pring 4 times like that.i want to print whatever in internal table only .
pernr(0001) two times there in it1 means
it1-pernr = it2-pernr then
it's printing
0001
0001
0001
0001
like this but actually in it1 only two records.
Anybody know solution.tell me.
Thanks
Regards,
NandhaHi,
code for your view
data : begin of it1 occurs 0,
z_pernr like pa9012-pernr,
z_fac_c like pa9012-zz_fac_c,
end of it1.
data : it2 like Zsc1 occurs 0 with header line,
It1 data
pernr FAC C
0001 5555
0001 5555
0002 4444
0003 3333
0006 8888
It2 data
pernr FAC C
0001 5555
0001 5555
0005 6666
0003 3333
output(My code)
loop at it2 .
loop at it1 where pernr = it2-pernr.
write:/01 it1-1pernr,
10 it1-z_fac_c.
endloop.
endloop.
out put i need.
0001 5555
0001 5555
0002 4444
0003 3333
Thanks,
Nandha -
Hi,
I have two internal tables it_tab1 and it_tab2. The fields are,
it_tab1 it_tab2
F1 F1
F2 F2
F3 F4
F6 F5
I want to <b>merge</b>(coloumn wise) these two internal tables into a new internal table it_tab3 where it_tab3 has fields,
F1, F2, F3, F4, F5, F6.(All the fields)
Here, in it_tab1 and in it_tab2 the fields <b>F1 and F2 are the key fields</b>.The number of records in the two internal tables are different.
Can anybody help me. thanx for spending ur time.hi,
try this
hi,
itab1 - first
itab2 - second
itab3 - both
data l_count type i.
l_count = 1.
loop at itab1.
read table itab2 with key f1 = itab1-f1 f2 = itab1-f2.
itab3 = itab1
if sy-subrc is initial
itab3-field6 = itab2-field3.
itab3-field7 = itab2-field4.
append itab3.
endif.
endloop.
loop at itab2.
itab3 = itab2
read table itab1 with key f1 = itab2-f1 f2 = itab2-f2.
if sy-subrc is initial
itab3-field6 = itab1-field3.
itab3-field7 = itab1-field4.
append itab3.
endif.
endloop.
sort itab3 by f1 f2.
delete adjacent duplicates by comparing f1 f2.
hope this will solve your problem
cheers,
sasi
Cheers,
Sasi -
Two internal tables with different structures
Hi Experts,
I Have two internal tables.
Table 1 structure:
Name
Age
Table 2 structure :
Name
age
branch
Now the table 1 has some 5 data's and table 2 is empty.
First i want to move that 5 data's from table 1 to table 2.
Then the branch field is same for all records. its stored in a separate field called 'Branch'.
finallay i need to move that branch to internal table 2 for all records.
So the Table 2 should has five records and each record should have the branch.Its like,
Name Age Branch
name1 10 ECE
name2 10 ECE
I didnt use with header line for both tables. In function module i declared as table parameter.
Please give me a logic.
Helps will be appreciated.Since the structure of yur both internal table is different so you can't use ITAB1[] = ITAB2[] statements.
In this case you have to loop on first table then move data into second table and appned data into second table.
Declare work area for both table with like line of statement as follows
data: wa_itab1 like line of itab1,
wa_itab2 like line of itab2.
Loop at ita1 into wa_itab1.
wa_itab2-name = wa_itab1-name.
wa_itab2-age = wa_itab1-age.
wa_itab2-branch = 'ECE'.
append wa_itab to itab2.
clear wa_itab1, wa_itab2.
endloop.
Hope this will solve your problem. -
Hi,
I have two internal tables with different data. But I have to cobined and make one entry,.
<b>STRUCTURE OF IT_FINAL.</b>
EBELN
EBELP
CNTYPE " Condition type.
TAX.
<b>
structure of it_fina1.</b>
EBELN
EBELP
JIP1
JIP2
JMO1.
ZVAS.
The problem is in the first internal table It_final contains more that one record for a particular EBELN and EBELP.
EBELN EBELP CNTYPE TAX.
185 10 JMO1. 150.
10 JIP1. 120
JIP2 130.
BUT I WANT ONLY ONE RECORD PER EBELN AND EBELP COMBINATIO. LIKE THIS IN THE SECOND INTENAL TABLE IT_FINAL1.
EBELN EBELP JMO1 JIP1 JIP2 ZVAS.
185 10 150 120 130
Can any one write the code please ?
Bye,
Satya.Hi,
Data : l_tabix type sy-tabix.
Loop at it_final1 into wa_final1.
l_tabix = sy-tabix.
read table it_final into wa_final with key ebeln = wa_final1-ebeln
ebelp = wa_final1-ebelp
cntype = 'JM01'.
if sy-subrc eq 0.
wa_final1-jm01 = wa_final-tax.
endif.
read table it_final into wa_final with key ebeln = wa_final1-ebeln
ebelp = wa_final1-ebelp
cntype = 'JIP1'.
if sy-subrc eq 0.
wa_final1-jip1 = wa_final-tax.
endif.
read table it_final into wa_final with key ebeln = wa_final1-ebeln
ebelp = wa_final1-ebelp
cntype = 'JIP2'.
if sy-subrc eq 0.
wa_final1-jip2 = wa_final-tax.
endif.
Modify it_final1 from wa_final1 index l_tabix.
endloop.
Best regards,
Prashant -
DIFFERENCE BETWEEN TWO INTERNAL TABLES,THESE TABLES HAVE SAME FILEDS
TYPES: BEGIN OF
TY_AS_UP,
WERKS LIKE
MARC-WERKS,
MATNR LIKE
MARC-MATNR,
LGORT LIKE
MARD-LGORT,
LABST(13) TYPE C,
(MARD-LABST)
END OF TY_AS_UP.
TABLES:
1) FLAT FILE DATA.:
DATA: WA_FILEDATA
TYPE TY_AS_UP,
I_FILEDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
2) SAP DATA (SELECT QUREY)
DATA: WA_SAPDATA
TYPE TY_AS_UP,
I_SAPDATA TYPE STANDARD TABLE OF TY_AS_UP INITIAL SIZE 0.
NOTE:
I brought data to above table(2) from two internal tables I_MARC and I_MARD .
My requirement is to display difference between tables 1) and 2) based on quantity field(MARD-LABST)..
report layout:
top-of-page
plant diff qty distri.qty sap
01 -20 30 50
end-of-page
page no 1.
Kindly help me,it is urgenthi micky,
thanks for your solution.
another problem:
I could not understand below
requirement, could you please
explain me.
8) Format the report based on the display options specified in the selection screen.
a) Display option EQUAL IN QTY show report lines where the difference is between the distributor file quantity and the SAP quantity is 0.
b) Display option DIFFERENCE IN QTY show report lines where the difference between the distributor file quantity and the SAP quantity is not 0.
c) If both options are selected, show report lines where the difference is both 0 and not 0.
d) Display SKUs in the distributors file not found in SAP as Missing SKUs
regards,
saritha. -
Matching data for two internal Table
hi guru's,
i have two internal table that is ITAB and itab1, and both has more than 2000 records, but MATNR is common field in both, so i want to update itab from itab1 according to matnr. can anyone please help me? actually i was using read table but it was not doing correct.
regards Nitin.dear all,
thanx for reply again...but still same problem. actually i m making a report for material price comparison
purchased in current month and same material if purchased in before months. so i need maintain the final ITAB with including same material if purchased in previus months.
ITAB1 : EBELN BLDAT MATNR WRBTR
100023 20080101 abcd 100.00
100025 20080106 xyzr 250.00
100028 20080102 abcd 100.00
100129 20080117 xyzr 150.00
100159 20080126 uvwx 170.00
ITAB2 : EBELN BLDAT1 MATNR WRBTR1
200026 20080201 abcd 105.00
200024 20080206 xyz_r4 250.00
200023 20080201 abcd 100.00
200129 20080217 xyzrw 150.00
200152 20080225 uvwx 190.00
Final record which i need.
ITAB3: EBELN BLDAT MATNR WRBTR WRBTR1
100023 20080101 abcd 100.00 105.00
100023 20080101 abcd 100.00 105.00
100159 20080126 uvwx 170.00 190.00
please suggest me accordingly...
regards nitin. -
Using for all entries of two internal tables in where clause of the select
Hi experts,
My requirement is, need to select Marc-minbe and wrpl-sobst, for all the entries of the two internal tables it_mara , and it_t001w.
here is the select queries i have used,
select matnr normt from mara into it_mara for all entries in it_data where normt = it_data-normt.
select konnr werks from t001w into it_t001w for all entries in it_data where konnr = it_data-konnr.
now i need to select minbe of marc table and sobse of wrpl table for all the entries of above internal tables, it_mara and it_t001w, using both matnr of it_mara and werks of it_t001w in where condition.
Pls advise how i can do it.
Thanks.
Moderator message: very basic, please work on this yourself first, these forums are not a substitute for ABAP training.
Edited by: Thomas Zloch on Dec 6, 2010 9:38 AMHi
call SE16 with table TFTIT in order to get a full list (it will be long...)
A list of FMs with parameters can be found in table FUNCT.
Finally go to sm37rsdf4
that will give you all the function modules with description
Here is the list:
http://www.erpgenie.com/abap/functions.htm
hope this helps...
Regards
CSM Reddy -
Comparing each value of two internal tables
HI everybody,
i have two internal tables itab1 and itab2 same structure
both r having four fields each and field with values
now i need to compare the two internal tables
and if every value of itab1 matches itab2
then i have to write one select quirie for the following given description
compare past and current shipping point
compare internal_table2 and internal_table3
if entry in internal_table2 and internal table3 match
variable_tknum = internal_table2-tknum
endif.
for each entry that matches:
select vlabdata into zi_vlabdata from vlbl where vbeln = variable_tknum and vlbl-vlabtyp = 'ZIBOOKNO'.
plz give me solution for this
thanks
hridhayanjili.sort : ITAB1 by f1,f2,f3,f4,
ITAB2 by f1,f2,f3,f4.
LOOP AT ITAB1.
READ TABLE ITAB2 WITH KEY F1 = ITAB1-F1
F2 = ITAB1-F2
F3 = ITAB1-F3
F4 = ITAB1-F4 BINARY SEARCH.
IF SY-SUBRC = 0.
*--all the fields of ITAB1 and ITAB2 are matching .
*--write your logic here
ELSE.
*--ITAB1 and ITAB2 records are not matching.
ENDIF.
ENDLOOP.
Regards
Srikanth
Message was edited by: Srikanth Kidambi -
Reg comparison of two internal tables
hi friends,
please help me solving this.
there are two internal tables t_zvs38 and t_value
1.t_value like seahlpres
2.t_zvs38 like zvs38.
values in t_value will be like this.
first line wil contain zmdtype(mandatory document) and second line will contain
zmdtypet (the description for zmdtype).
eg.
D001 -
-zmdtype
internal----
zmdtypet
D002
external
D003
renewal
values in t_zvs38.
for a particular sales.org the zmdtype is filled.
select vkorg zmdtype into corrsponding fields of table t_zvs38
where vkorg = p_vkorg.
Now i want to compare t_value and t_zvs38 with field zmdtype
and delete the contents of t_value which are not in t_zvs38.
i have written like this.
loop at t_value.
read table t_zvs38 with key zmdtype = t_value-string.
if sy-subrc ne 0.
delete t_value. "to delete zmdtype
sy-tabix = sy-tabix + 1.
delete t_value. " to delete zmdtypet
else.
sy-tabix = sy-tabix +2. "to go to next zmdtype.
endif.
endloop.
but it is deleting all the contents of t_value.
points are assured.CLEAR zvs32t.
SELECT zvs32tzmdtype zvs32tzmdtypet
INTO (zvs32t-zmdtype, zvs32t-zmdtypet)
FROM zvs32t
JOIN zvs32
ON zvs32tzmdtype = zvs32zmdtype
WHERE zvs32t~spras = sy-langu
AND zvs32~zfrenewal = space.
WRITE zvs32t-zmdtype TO t_value.
APPEND t_value.
WRITE zvs32t-zmdtypet TO t_value.
APPEND t_value.
ENDSELECT.
SELECT vkorg vkbur zmdtype FROM zvs38 INTO CORRESPONDING FIELDS OF TABLE t_zvs38
WHERE vkorg = p_vkorg
AND vkbur = p_vkbur.
LOOP AT t_value INTO wa_area1.
v_index = sy-tabix.
READ TABLE t_zvs38 INTO wa_area2 WITH KEY zmdtype = wa_area1-string
BINARY SEARCH.
IF sy-subrc NE 0.
IF l_flag IS INITIAL.
DELETE t_value INDEX v_index.
ELSE.
CLEAR l_flag.
ENDIF.
ELSE.
l_flag = 'X'.
ENDIF.
ENDLOOP.
Using this code ,i am unable to ge the correct output.Thank u all for ur help. -
Downloading two internal tables in same text file
I have one internal table as like below.
Data:begin of itab1 occurs 0,
rec(5),
end of itab1.
Itab1 is getting updated from input text file(Continuous text).
Here Itab1 contains one record with Indicator '01 and n number of records with indicator '02'.
This needs to be seperated in to two internal tables.
data:Begin of Itab_Head occurs 0,
Rec_ind(2) type C,
Name(3) type C,
end of itab_Head.
data:Begin of Itab_Item occurs 0,
Rec_ind(2) type C,
Id(3) type C,
Status(10,
end of itab_Item.
loop at itab1.
If itab1-Rec+0(2) = '01'.
Itab_Head-Rec_Ind = itab1-rec+0(2).
Itab_Head-Name = itab1-rec+2(3).
Append Itab_Head.
elseif itab1-rec+0(2) = '02'.
Itab_Item-Rec_Ind = itab1-rec+0(2).
Itab_Item-Id = itab1-rec+2(3).
Append Itab_Item.
endif.
endloop.
After moving to the internal tables I am doing some processing and updating the status of Itab_item.
After all these again I have to download the internal table as a text file.Now my question is.
I have values in 2 diff internal tables.How to download the two in same file.See this sample code.
data: itab1 type string occurs 0 with header line,
itab2 type string occurs 0 with header line.
itab1 = 'itab1_text'.
append itab1.
itab2 = 'itab2_text'.
append itab2.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
exporting
FILENAME = 'C:\ftext.txt'
APPEND = 'X'
changing
DATA_TAB = itab1[].
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
exporting
FILENAME = 'C:\ftext.txt'
APPEND = 'X'
changing
DATA_TAB = itab2[].
Svetlin -
Two internal tables in to one internal table
Hi ,
I have two internal tables ITAB1 and ITAB2, i would like to put fields from two internal tables in to one internal table(ITAB3) with out using inner joint. any one of you can give the sample code for this
Thanks
Raja.Hi,
Kamesh wrote :
Read itab2 into wa_itab2 with key f2 = itab1-f1 <USe your where conditions here>.
Read statement does not have WHERE conditions.
Please be careful while posting. Your thread will be reffered by many people. Please dont mislead.
Regards,
Swapna. -
Function module for comparing contents of two internal tables
Hi All,
Is there any function module to compare contents of two internal tables of same structure?
If yes please let me know.
Thanks in advance.
AmolHi
call SE16 with table TFTIT in order to get a full list (it will be long...)
A list of FMs with parameters can be found in table FUNCT.
Finally go to sm37rsdf4
that will give you all the function modules with description
Here is the list:
http://www.erpgenie.com/abap/functions.htm
hope this helps...
Regards
CSM Reddy
Maybe you are looking for
-
Incoterm to be derived from Ship to party in sales order creation via va02
Hi Experts, I have a requirement. When a new sales order is created from the screen va02, the inco term flows from the sold to party. It should infact flow from the ship to party. So standard SAP SAP derives the incoterms from the sold-to -party whe
-
Hi Gurus, DMS configuration done in SAP R/3 and able to see all configured document types in sap easy dms as well. But document description wrongly showing under document types. SAP R/3 EASY DMS E
-
How do I change the name of my "User" name?
I bought a used Macbook Pro. I hate my Home User name and can't figure out how to change it. Let me explain. When looking at the finder window at the botom it gives a path "Macintosh HD > Users > Abc123". How can I change "Abc123" to a name I like? U
-
XML TO .CSV Conversion issue
Hi All, I Developed an MDM to 3rd Party FTPscenario with FCC . The data from MDM comes as XML and i placed it at the FTP succesfully with .CSV format. But the issue is with tirmming of before Zeros in excel file, eg: The value of a field GTIN_No is 0
-
We set up a few redirect links on our Intranet site to other sites. one works and the other doesn't. to chapters site -- when clicking on the link, it goes to a interim page on Intranet for a few seconds. it shows: This page is redirecting to http