Problem in some special charecter

Hi All,
I have two database oracle 10gR2 in my environment.
In database 1
select chr(50070) from dual
Chr(50070)
Ö
In Database 2
select chr(50070) from dual
Chr(50070)
Ö
Why is it so? I have the same charecter set for both the databses.
Thx in advance.........
Regards,

Output can be different because:
- database character set is different; check with:
select value from nls_database_parameters where parameter like '%SET%';- operating system setting NLS_LANG is different: see http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm

Similar Messages

  • Problems displaying some special characters on gray 80gb classic

    Hello,
    I recently got a new gray 80gb iPod classic and I have noticed that certain characters cannot be displayed on it. This occurs with characters such as 'ø' (which is actually the full name of an obscure minimal techno act from the early 1990s) and 'ÿ' (which would occur in the name of the metal band Queensrÿche in the case of my iPod). What is unusual is that these characters DO show up fine when I'm browsing through artists/albums, etc However when I actually play a song whose title or artist names contains such characters, they do not show up on the screen (next to the album art, title/artist/album interface).
    Has anybody else noticed this and, if so, found any way to rememdy it?
    Thanks in advance,
    J

    If your xml is utf-8 then I don't think you need the html
    encoding with the ampersand.
    The following works fine for me in windows:
    var cdata="<b>Main Title Copy Goes Here
    ™</b>"
    var tf:TextField=
    this.createTextField("myTF",1,100,100,300,200);
    tf.html=true;
    tf.htmlText=cdata;
    That was with the default settings and no embedded fonts etc.

  • Problem with special charecter while calling a BAPI from Webdynpro JAVA.

    Hi Experts,
    I am calling a BAPI from Webdynpro JAVA. I am passing a special charecter  u2018 as input to BAPI. But I am getting a # as input in R/3.. Can any one explain why it is getting changed?
    Any inputs regarding this issue are appreciated.
    Thanks,
    Kasinath.

    Hi,
        I had same problem before..For this I have created function module in backend for removing #. It was for converting Stream to ITF text.
    CONVERT_STREAM_TO_ITF_TEXT.
    Try this.
    Thanks,
    Prajakta

  • Problem about printing special character in bex query analyzer

    Hi,
    in bex query analyzer i have created one restricted key figure , in which i have substracted two date with the help of replacement path.
    So i got result.
    But i am facing one problem. when in both date, if one date is null or # then it is giving some big value like -734567.
    But i want some special character like X instead of this big values.
    So how can i do this?
    With the help of if and else it can be done.
    But how can we print special character in report.
    Please help me
    Thank you in advance

    hi,
    You cannot show X in a formula result. You can highlight the row using exception.
    Still if you want to show X in the result then you need to create a formula variable on a char which returns X value all the times.
    Then you can use the three formula variable to write a formula so that it shows the difference:
    date1 -- formula variable
    date2 -- formula variable
    charx -- formula variable.
    the formula will be
    Count(date1)Count(date2)(date1 - date2) + charx *(count (delta(date1) + delta(date2))).
    this would return the X value if any of the dates are empty otherwise their difference.
    regards.
    Arvind.

  • [SOLVED] urxvt doesn't display correctly some special characters

    Hello everyone,
    I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
    Here is a comparison between xfce4-terminal and rxvt-unicode  (I used theses characters as exemple):
    xfce4-terminal :
    urxvt :
    And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
    !Font
    URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
    !General
    URxvt.scrollBar: false
    URxvt*imLocale: fr_CH.UTF-8
    URxvt.saveLines: 5000
    URxvt.geometry: 95x26+50+50
    Has someone an idea what the problem could be?
    Thank's in advance.
    Last edited by mwm (2013-11-13 13:15:48)

    This is what I think is happpening.
    PragmataPro may not contain those glyphs.  It appears to have a wide array of glyphs but it is not unicode complete.
    Xfce-terminal is a vte terminal.  When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font.  Urxvt will only use the glyphs in the font or fonts specified.  If PragmataPro does not contain the glyphs, urxvt will display boxes.
    You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify.  Here's an example from my urxvt configs:
    urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
    xft:WenQuanYi Bitmap Song:size=8, \
    xft:FreeSerif:style=Regular, \
    xft:unifont:style=Medium:antialias=false
    I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me.  This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

  • Problem with displaying special language symbol in charts

    Hello,
    I have problem wih displaying special symbols in czech language in charts. When I write some value into Categoryaxis or Value axis in chart designer I see the right value. Then I save the web template and present it on the web. But on the web presentation I don´t see the right value. I see the title without special czech symbols.
    I find on forum some solution for language dependent texts (using special program eg. ZHTMT_TEXT) I think that It´s not solution for me. I think that I have problem with font or code side...
    Can you give some advices?
    Thanks
    Kind regard.
    Petr

    I try to change the font but the output is not correct...
    Czech language has some special symbols a e.g. &#269;,&#345;, á.
    Thanks
    Petr

  • Problem with Icelandic special characters on Mac

    Hello
    I am working on a Flash publication for students, and I want it to run on Mac as well as PC. Everything goes fine, except a problem with three special characters in my language, Icelandic. I am working on a registration and login page where I am using text boxes and text input boxes. Everything looks correct on PC, but on Mac the characters Þ Ð Ý are lost.
    I have tried different fonts etc.
    Any idea what is wrong?
    Jónas Helgason

    Hello Jónas,
    Did you ever figure this out ?
    I have a similar problem except only with two letters (both upper and lower case).  These two Icelandic letters can't be entered into a Flex TextInput box in the Flex apps I am creating when they are loaded on a Mac.  The letters are known as &Eth, &eth, &Thorn and &thorn in HTML terminology.  Typing these characters on the keyboard results in the following:  { [ ? /
    However I can copy the characters in question from some other app like TextEdit and paste them into a TextInput box in my Flex app and all is well, they show up correctly.
    This happens regardless of the Mac browser used and the Flash plugin version used (have tried both 9 and 10) and also happens in the standalone Flash Player application.
    Does anyone have any idea how to fix this or is this a bug in Flash Player ?  This is really annoying as it makes text input into Flex apps on Icelandic Macs very difficult.
    There must be something wrong with the mapping of keyboard key codes into character codes on the Mac that is causing this.
    Btw, I just heard from a friend that this problem does not exist in MacOS 10.6.  I am running 10.4 and have tested this on 10.5 and it exists on both of those OS versions.
    Rgds,
    Hordur Thordarson
    Lausn hugbunadur
    http://lausn.is

  • ### Problem in retrieving special characters with Oracle 9i JDBC drivers

    hi,
    We are having some problem with retrieving special characters like '�' from the database.
    Our application is using JDK1.3.1 with Oracle 9i at the back end(Version: 9.0.1.0.0). We are using oracle 9i thin drivers (classes12.zip) for database interaction.
    To relieve the data from database we are using PreparedStatement in two ways
    1. Creating a preparedstatement from connection object without any parameters and then retrieve the
    data using it. This gives the results in correct format i.e. special characters like '�'
    2. Create the preparedstatement by passing the following parameters.
    i) ResultSet.TYPE_SCROLL_INSENSITIVE
    ii) ResultSet.CONCUR_READ_ONLY
    In this case we are not able to retrieve the special character like '�' correctly. Instead the ResultSet
    returns 'h'
    I think this is the problem with Oracle drivers. Does anyone have any information about the mentioned problem.
    rgds

    I don't know exactly (because I am using JDK 1.4 with ojdbc14.jar where these problems seem to be rare...) but you may consider this:
    1. Add nls_charset12.zip to your classpath to ensure that the encoders are present (may or may not help)
    2. Swith to JDK 1.4, and do this:
    Instead of String s = getString(column)
    use
    byte[] bytes = getBytes(column);
    ByteBuffer bb = ByteBuffer.wrap(bytes); // in package java.nio
    CharBuffer cb = Charset.forname("ISO-8859-x").decode(bb);
    String s = cb.toString();
    The latter method allows you to perform the encoding/decoding manually.
    3. Change the character encoding in the database to unicode upon database setup.
    4. Try playing with NLS parameters (alter session ...)

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I'm going to guess videos buffer for a while also...
    Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
    To close apps:   Double click home button, swipe up to close the apps.
    To solve internet problem, contact your provider.   Basic internet is not enough for video games and movies.   Your router may be old and slow.

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • There were problems downloading some purchased items.

    All episodes of Under cover boss season 2 downloaded apart from unifirst.
    After contacting Apple support I'e tried downloading on a different network and a different computer (Imac, then macbook and then ipad).
    I keep getting the following error.....
    There were problems downloading some purchased items.
    For more information on the items that could not be downloaded, click below.
    There was a problem downloading “UniFirst / Undercover Boss, Season 2 / Undercover Boss”. An unknown error occurred (-50).
    Please check that the connection to the network is active and try again.
    There was a problem downloading “UniFirst / Undercover Boss, Season 2 / Undercover Boss”. An unknown error occurred (-50).
    Please check that the connection to the network is active and try again.
    Your help would be appreciated

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Spanish Dictionary and problems with spanish special characters

    I need a spanish dictionary, with all spanish words. I know that your priority are france, spanish, germany and Italy. So, the component has problems with spanish special words, this problem was notified before.
    Have you ready something? A new version?
    Thank you for your time.

    For the special character issue, you can check the reference:
    http://forums.adobe.com/message/2430501

  • Some special characters getting replaced by ? in TOAD

    Hi,
    I am using TOAD for updating a few records in the DB. Some special characters (non-english) like Staříč get replaced by Sta?í? in TOAD. I tried to set the characer set to default and East Europe under Editor Options, but it still doesn't work.
    Any suggestions?

    i) Verify your DB characterset can handle these characters
    ii) Verify that the correct values are being stored (use dump function)
    iii) Verify that NLS_CLient settings match NLS_Server settings
    iii) Verify that this is not a windows display issue. ie Windows has been set up to display these characters.
    One suggestion is to use OracleSQLDeveloper. You won't have any display issues then. :)
    I use it to display arabic charcters and I don't need any registry changes etc
    Edited by: Keith Jamieson on Dec 8, 2008 10:47 AM

Maybe you are looking for