Problem Installing Oracle 10g Software in Silent mode on OEL6

Hi All,
I have created response on 32-Bit OEL6 Virtual Machine. And it worked fine when doing silent installation on 32-Bit environment.
When i am using the same response file to setup Oracle environment on OEL6 64-Bit machine, it gives me following error:
*[oracle@usv000322 database]$ ./runInstaller -silent -responseFile /u01/install_10g.rsp*
*./runInstaller: /u01/database/install/.oui: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory*
*[oracle@usv000322 database]$*
I have installed all the required RPMs. Is there anything i am missing here ?
Any information would be appreciated.
Thanks,
Srikanth

Fran wrote:
check if user have the privileges on that directory and directory exists.I am performing the action using oracle user and it does have all the privileges on the folder:
[oracle@usv000322 u01]$ ls -ltrh
total 2.0G
drwx------. 2 oracle oinstall 16K Apr 4 01:12 lost+found
-rw-r--r--. 1 oracle oinstall 765M Apr 13 17:33 10201_database_linux_x86_64.cpio
-rw-r--r--. 1 oracle oinstall 36K May 14 12:11 install_10g.rsp
-rw-r--r--. 1 oracle oinstall 1.2G May 15 16:26 p8202632_10205_Linux-x86-64.zip
drwxr-xr-x. 2 root root 224K May 15 20:25 Packages
-rw-r--r--. 1 oracle oinstall 51K May 17 09:41 Oracle_10205_PS.rsp
-rw-r--r--. 1 oracle oinstall 37K May 24 14:59 install_10g_2.rsp
drwxrwxrwx. 6 oracle oinstall 4.0K May 25 17:33 database
And no OUI within database/install.
Edited by: Srikanth on May 25, 2012 5:42 PM

Similar Messages

Problems: install oracle 10g 32 bits on RH 5.8 x64

Hello,
Someone has given me an oracle 10g 32 bits to install on a Redhat 5.8 64 bits server (no other server available).
I have a lot of errors during the installation process
exemple:
INFO: /usr/bin/ld: skipping incompatible /oracle/client/10x_32/lib/libxml10.a when searching for -lxml10
/usr/bin/ld: cannot find -lxml10
collect2: ld returned 1 exit status
I installed libxml10 64 and 32 bits on the system !
I would like to know if this configuration is POSSIBLE ???!
If yes, what is the solution / process to fix these compli. problems :-|
Thanks for your help !

962147 wrote:
yes i read the installprocess and pre requisits:
But first "**is it possible to install oracle 10g 32 bits on redhat 64 bits ???* "
yes or no ? :-(
I've never seen any 32-bit software that DIDN'T run on a 64 bit OS, as long as the necessary libraries are installed.
I used this process: is it the good one ?
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-installation-on-rhel-5.php
Tim does a very nice job with his stuff on oracle-base, but that is NOT the official documentation. Why not use ORACLE'S own installation guide? Have you seen http://docs.oracle.com/cd/B19306_01/install.102/b15667/toc.htm
And why are you installing a a version of Oracle that is out of support?
And as long as you have a 64-bit OS, why would you want to run a 32-bit version of Oracle?
Edited by: 962147 on 29 sept. 2012 13:06Edited by: EdStevens on Sep 29, 2012 9:22 PM

Error in GetCurrentDir(): 13 when installing oracle 10g software

Hi Basis Expert,
We are doing an Mock System Upgrade.
So now we are installing
Before upgrade
BW 3.5 with oracle 10g (10.2.0.4)
After upgrade
BI 7.0 with oracle 11g (11.2.0.4)
When installing the Oracle 10g software we are getting an error
Error in GetCurrentDir(): 13
Error in GetCurrentDir(): 13
Error in GetCurrentDir(): 13
Starting Oracle Universal Installer...
Our OS is AIX 5.3
Please help us in fixing this issue
Regards,
Anil Shenoy

[While Installing Oracle software facing "Error in GetCurrentDir(): 13" [ID 378393.1]|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=378393.1]
Solution
In order to get rid of this problem, please check for the following.
1. You are logged in as the oracle user and group which owns the oraInventory (if this is not the first install on this system)
2. You have read/execute permissions on the source files/directories (CD-ROMor CD-ROM image)
3. You have write permissions on the target directory (ORACLE_HOME)
4. When the target filesystem for ORACLE_HOME is unmounted the directory for the mount point has rwx permissions for the oracle user
If this is the first Oracle software to be installed on this system you can ignore item 1 as it will create a new oraInventory with the correct permissions. For item 4, unmount the filesystem and "chmod 777" the directory used for the mount point, then remount the filesystem. Item 4 is actually a somewhat frequent issue on AIX.
If none of the above solves your problem, the only alternative left would be, to copy the Staging directory (Disk1 of Install) to /tmp directory and proceed with the installation.

Installing Oracle Fusion Middleware in Silent Mode = -silent

Hi there, I´m trying to install ofm_soa_generic_11.1.1.1.0_disk1_1of1 (Oracle Soa Suite) through silent mode by -silent flag.
I´m using this command :
/<package>/./runInstaller -jreLoc <jrelocation> -silent
I´m getting these errors :
[ERROR] All of the following variables must be present.
Provide a value for Variable Name:ORACLE_HOME
. Aborting Install
All items behind passed successfully !
How can I set oracle_home if installation has not being done yet ? Plz any help I´d appreciate.
Thanks.
Edson

The easiest way to create a response file is by starting the wizard, filing in the blanks on all pages and save the result before the wizard asks you to install. Just stop here.
--olaf

Problems Installing Oracle 10g in Red Hat enterprise 5.3

I am trying to install Oracle 10g in Linux RH 5.3 the I get the following error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-05-07_11-08-08AM/jre/1.4.2/lib/i386/
libawt.so: libXp.so.6: cannot open shared object file: No such file or directory

This should help you out.
"Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1

Install oracle database software in slient mode

I would like to automate my Oracle database software installation.
Can I execute runInstaller in sleep mode
like
dbca -silent -createDatabase -templateName General_Purpose.dbc \
please can I get the exact syntax.

user5846399 wrote:
I would like to automate my Oracle database software installation.
Can I execute runInstaller in sleep mode
like
dbca -silent -createDatabase -templateName General_Purpose.dbc \
please can I get the exact syntax.Pl post details of OS and database versions. There is plenty of information in the Install Docs
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/app_nonint.htm#BABFEECI
HTH
Srini

Problem - Installing oracle 10G & Developer Suite

Dear Team
I am trying to install Developer Suite and Oracle 10g . but unable to get into Sql. always i am getting a error . where as i changed everything in tnsnames.ora and checked the Listner. In Oracle 9i i dont get the error and very somoothly i can install and configure it . here some times it gives a error as Account Locked etc.,
Please advice how to configure or where I am doing a mistake
Sanjay

Few more details about how you are connecting and which user you are using for connection would be helpful.
With Oracle 10g, assuming that you have created a sample database on the same machine with mostly DBCA...
here some times it gives a error as Account Locked etc.,if you are referring to ORA-28000 error, then it seems the password that you have been using is incorrect and you have exceeded the failed login attempts.
Or you need to unlock the user in first place, since that is locked by default during Oracle installation (assuming you are referring to the sample schemas).

Problem installing Oracle 10g Express on Windows XP

I have downloaded and installed the software and it appears to work (can use command line SQL). However I cannot get the browser interface to work - I have checked all of the settings mentioned in the installation notes. Ideas on how to debug/fix? Many thanks

Hmm very funny...
1. No error message or specific behaviour provided
2. Look at forum section name (Linux)
Installation section is located here:
Database Installation
And forum dedicated to Express edition is located under http://asktom.oracle.com

Problem Installing Oracle 10g on Windows 2000

Hi all,
I´m trying to install the Oracle 10.2.0.1 on Windows 2000 Terminal, but
I´m getting the following error:
java.util.zip.ZipException: oversubscribed literal/length tree
     at java.util.zip.InflaterInputStream.read(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)Somebody know about this?
A important information: Other person have tried to install the Oracle9i, but he've cancelled the operation.
So, I've cleared Oracle information from regedit, but the key LEGACY_ORACLEMTSRECOVERYSERVICE
I cannot make clear. I don't know if this can influence in installation
thanks!!!!

Hi all,
Thank u for help me. Very good, but now I got other error :-(
Error file:
java.util.zip.ZipException: invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)
     at java.util.zip.ZipInputStream.readEnd(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1387)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1278)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1237)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1192)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1123)
Log file:
INFO: Exception thrown from action: copyGroupFromJar
Exception Name: IOException2
Exception String: Error in writing to file 'C:\oracle\product\10.2.0\db_1\jlib\oemlt-10_1_0.jar'. [invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)]
Exception Severity: 2I'm looking for this error, I found several solutions, but :-(
thank u so much again!!!!
[]s

Problem installing oracle 817 Personal Edition in non-interactive mode

When I install oracle 817 PE in silent mode, if there's a pre-8.1.6 version of Oracle already installed the Oracle Data Migration Assistant pops up. This is exactly what I don't want to happen. Is there a way to keep ODMA from launching? Thank you.

It is not possible installing Oracle in WINDOWS ME platform, because this won't support for ORACLE. Unfortunately ORACLE also have no version for WINDOWS ME. If possible, upgrade your OS to WINDOWS 2000 or downgrade to WINDOWS 98 and try it.

Install oracle 10g on solaris 9 platform without setting noexec_user_stack

Hi,
I'd like install oracle 10g software on solaris 2.9 platform without setting noexec_user_stack parameter to 1.
The problem is that i need install software before, for migrating product environment.
I can write /etc/system file but i can't reboot system until several days.
I will not start migration process until i reboot the system and parameter definitely set.
Do you know if we will can have any kind of problem???
Thanks in advance.

Thanks for your answer FZheng. But i will just install software. I will not start any oracle 10g process until i reboot the machine.
I think that oracle software installacion should not be affected. Do you know if this parameter affect to compile softwere during OUI wizard progress???.
Before going on migration process and start database i will sure that this parameter is correctly fixed.
PD.: I couldn't read metalink reference that you've suggested becouse my metalink account have problem access in this momment. During all day i've been reeding metalinks docs without any problem until this momment, bad luck.
In test environment i've installed oracle without this parameter and i've never had any problem. But this installation is more important than others becouse i ask you in this specialist forum.
Thanks again !!!

Can't install oracle 10g on solaris v10 X86!!!

Hi everybody, I got error messages below:
====================================================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
=====================================================
Does that mean there is not Oracle 10g for Solairs 10 X86?
Where can I find Oracle 9i for Solairs x86?
Thanks advance!

10g on Solaris 10 needs special handling:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

PROBLEM IN INSTALLING ORACLE 10G ON WINDOWS 2003 SERVER(WIN2K3)

Hi to all,
I have successfully removed Oracle 9i from win2k3.Am unable to install oracle 10g on the same system.............. problem : Universal installer window stucks at 14%, no error......no resource utilization by installer(as viewed from task manager).
Please help i ve read the oracle installation documentation as well............

Ok gotcha !!!!!!!!!!!!! its a CRC error given by java
dats y it stucked :(
am hereby uploading the error:
java.util.zip.ZipException: invalid entry CRC (expected 0xc9e96252 but got 0x5651c9f5)
     at java.util.zip.ZipInputStream.readEnd(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
CAN SOMEONE SUGGEST ME WHAT TO DO NOW ???????????plz reply
ANKUR SHARMA

Problem on Installing Oracle 10g on Windows XP Professional

I'm getting the following error while I install Oracle 10g R1, on Windows XP Professional.
The Path enviroment variable is bigger than 1023 characters. This value cannont be set.
Has anyone seen this error before?

Hi,
you have two option to start your oracle service. your problem is your oracle serivce is not start.
for that you can start manully....
like
on command prompt.
cmd>net start oracleservice<sid>
or
you can set automatic for oracle service.
go services window. start >>>> run >>>> services.msc <<<enter>>>
check and select oracle services and right click and set automatic..
every time your system is reboot then oracle service is automatically is start.
regards
Taj

Hi, i want to install oracle 10g on RHEL5(Red hat) where i can get softwar

i want to install oracle 10g on redhat5 pls some one tell me where i can get oracle software.

Hi;
1. As Paul mention open http://www.oracle.com/technetwork/database/10201linuxsoft-097986.html
2. Accept license aggrement
3. As Prabhu mention Prabhu
Download the Complete Files
10201_database_linux32.zip (668,734,007 bytes) (cksum - 2737423041)
use some downloder manager like flashget etc.
Regard
Helios

Problem Installing Oracle 10g Software in Silent mode on OEL6

Similar Messages

Maybe you are looking for