Problem integrating JProbe 4.0 with Weblogic 4.5.1

I'm trying to integrate JProbe 4.0 with Weblogic 4.5.1. JProbe
doesn't provide an integration for this version of Weblogic so I have
to do the set up by hand. We are running Weblogic with a 1.3 JVM on
Solaris.
First problem is that the JVM we were using wasn't supported by
JProbe. So I swapped to a different version. The application,
consisting of about 150 EJBs plus JSPs and Servlets works fine with
this JVM. When I run with JProbe, JProbe waits for the console
connection then Weblogic starts. About half way through deploying all
the EJBs the application stops. I've done a thread dump and it
doesn't seem to be a deadlock. Looking at the JProbe console I can
see that objects are getting allocated and GC'd in the typical saw
tooth fashion indicating that things are still running. I've waited
15 minutes but the application does not progress beyond this point.
Any got any ideas about this or tips as to how I can debug things
further?
tia
David

Hi David,
You could try to turn off memory debugging along with
putting the debug environment into a big fat box. With
memory debugging on JProbe is slooooow...
Regards,
Slava Imeshev
"David Off" <[email protected]> wrote in message
news:[email protected]..
I'm trying to integrate JProbe 4.0 with Weblogic 4.5.1. JProbe
doesn't provide an integration for this version of Weblogic so I have
to do the set up by hand. We are running Weblogic with a 1.3 JVM on
Solaris.
First problem is that the JVM we were using wasn't supported by
JProbe. So I swapped to a different version. The application,
consisting of about 150 EJBs plus JSPs and Servlets works fine with
this JVM. When I run with JProbe, JProbe waits for the console
connection then Weblogic starts. About half way through deploying all
the EJBs the application stops. I've done a thread dump and it
doesn't seem to be a deadlock. Looking at the JProbe console I can
see that objects are getting allocated and GC'd in the typical saw
tooth fashion indicating that things are still running. I've waited
15 minutes but the application does not progress beyond this point.
Any got any ideas about this or tips as to how I can debug things
further?
tia
David

Similar Messages

Problem while using PrepStmt.executeBach with Weblogic 6.0sp1 and

- I'm getting the same error when I use WLS 6.0 SP1 & thin driver. I'm not
getting this error when I use thin driver without WLS.
- This is definitely a bug in WLS. As a workaround put classes.zip {that
comes with oracle installation} before weblogic.jar in your classpath. This
way, classloader will load the oracle supplied classes & everything will
work smoothly
Manav
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]...
>
>
Ruta wrote:
Hi Joe
I tried using a java standlaone program using prep stmts and oracle thin
driver
and it works just fine.
So is this a bug with Weblogic? Finally connection pooling isapplication server's
responsibility, isnt it..
I am inlcined to conclude this coz connection pooling works fine withStatement.executeBatch()
but not with prepStatement.executeBatch()
How do I resolve this now.
Thanks
Ruta
...Does it not release the connectionOk. Now let me see the JDBC code example. I'll see what's up.
Joe
Joseph Weinstein <[email protected]> wrote:
The first thing you should do is to reduce the problem to the simplest
form.
Write a tiny standalone program that just uses the thin driver
directly,
and repeats the code you are trying to run. This will eliminateWebLogic
from the equation and see if it's an Oracle-only bug.
Joe
Ruta wrote:
Hi,
I am trying to do multiple inserts in a table using the
PreparedStatement
of JDBC2.0.
I am using a TxDataSource of Weblogic server with a thin driver
oracle
pool. I
am using the driver classes that come with the weblogic.jar.
The problem is as follows:
I can manage to succesfully do the executeBatch a few
times..Interestingly
it
executes as many no. of times as the Initial capacity(not even maxcapacity) of
my connection pool.
Then it gives me the following error:
java.sql.SQLException: java.sql.SQLException: Missing IN or OUT
parameter
at index::
1
at
weblogic.jdbc.rmi.SerialStatement.executeBatch(SerialStatement.java:394)
atcom.equitable.acs.common.ACSCtrlBean.saveSDECData(ACSCtrlBean.java:147)
atcom.equitable.acs.common.ACSCtrlBeanImpl.saveSDECData(ACSCtrlBeanImpl.java:1
10)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl.saveSDECData(ACSCtrlBeanEOImpl.ja
va:30)
atcom.equitable.acs.common.ACSCtrlBeanEOImpl_WLSkel.invoke(ACSCtrlBeanEOImpl_W
LSkel.java:133)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
atweblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
atweblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
atweblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
atweblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
atweblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
This Oracle error has error code 17041.. I could not find more infoon it, even
from the Oracle site.
I conclude that the connections are not getting relesed.
But i ahve written
con.close(); even
con=null; (out of desparation :) )
but still the connection is not released.
I am getting the connection in the saveSDECData method
I need to fix thsi problem ASAP..Any Help/Comments will be
appreciated..
Finally the most interesting part is :
executeBatch works perfectly fine with the Statement object..
so probably the culprit is the PreparedStatement implementation ofOracle..Can
anybody validate this pls
Regards
Ruta--
PS: Folks: BEA WebLogic is expanding rapidly, with both entry andadvanced
positions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure
products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and SanJose
CA.
Send resumes to [email protected]
PS: Folks: BEA WebLogic is expanding rapidly, with both entry and advancedpositions
for people who want to work with Java, XML, SOAP and E-Commerceinfrastructure products.
We have jobs at Nashua NH, Liberty Corner NJ, San Francisco and San JoseCA.
Send resumes to [email protected]

How to Integrating Microsoft MapPoint Webservice with Weblogic Workshop 9.2

I have to integrate the MapPoint Webservice with Weblogic Workshop 9.2. But while analyzing the WSDL i m getting the error.
The error which I m getting is :
An error was encountered while analyzing the WSDL:null jName
Detail:
com.bea.wlw.controls.service.ui.except.TypesAnalysisFailedException: java.lang.IllegalArgumentException: null jName at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.<init>(SelectSCInfoPage.java:127)
at com.bea.wlw.controls.service.ui.GenerateSCWizard.getPageList(GenerateSCWizard.java:150)
at com.bea.wlw.controls.service.ui.GenerateSCWizard.addPages(GenerateSCWizard.java:136)
at org.eclipse.jface.wizard.WizardDialog.createContents(WizardDialog.java:499)
at org.eclipse.jface.window.Window.create(Window.java:418)
at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:996)
at org.eclipse.jface.window.Window.open(Window.java:776)
at com.bea.wlw.controls.service.ui.actions.NewSCGenAction.run(NewSCGenAction.java:101)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:246)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:538)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:400)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3125)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2758)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
Caused by: java.lang.IllegalArgumentException: null jName at com.bea.staxb.buildtime.internal.bts.BindingTypeName.<init>(BindingTypeName.java:51)
at com.bea.staxb.buildtime.internal.bts.BindingTypeName.forPair(BindingTypeName.java:40)
at com.bea.staxb.buildtime.Schema2Java.createBindingType(Schema2Java.java:766)
at com.bea.staxb.buildtime.Schema2Java.bind(Schema2Java.java:363)
at com.bea.staxb.buildtime.Schema2Java.internalBind(Schema2Java.java:301)
at com.bea.staxb.buildtime.BindingCompiler.bind(BindingCompiler.java:125)
at weblogic.wsee.bind.buildtime.internal.XmlBeansBaseBindingsBuilderImpl.createBuildtimeBindings(XmlBeansBaseBindingsBuilderImpl.java:159)
at weblogic.wsee.tools.source.EndpointBuilder.setupBindingProviderWithServices(EndpointBuilder.java:836)
at weblogic.wsee.tools.clientgen.ClientGenUtil.createBindingProvider(ClientGenUtil.java:458)
at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBindings(ClientGenUtil.java:211)
at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBindings(ClientGenUtil.java:174)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadBuildtimeBindings(BindingsClassNameReference.java:228)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getBindings(BindingsClassNameReference.java:161)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadJsService(BindingsClassNameReference.java:307)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getJsService(BindingsClassNameReference.java:362)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadTypeNamesForService(BindingsClassNameReference.java:398)
at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getTypeNamesForService(BindingsClassNameReference.java:383)
at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeNamesForService(BindingsCheckUtility.java:210)
at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingTypeInfoForService(BindingsCheckUtility.java:131)
at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingInfoForServiceByBindingsDataSourceType(BindingsCheckUtility.java:104)
at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.initializeTypesForTheService(BindingsCheckUtility.java:253)
at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.findMatchingBindingsDataSources(BindingsCheckUtility.java:434)
at com.bea.wlw.controls.service.ui.util.BindingsChecker.<init>(BindingsChecker.java:55)
at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.checkForCompatibleBindings(SelectSCInfoPage.java:304)
at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.<init>(SelectSCInfoPage.java:98)
... 31 more

Plz find the WSDL file's text below :
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://s.mappoint.net/mappoint-30/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="http://s.mappoint.net/mappoint-30/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<s:schema elementFormDefault="qualified" targetNamespace="http://s.mappoint.net/mappoint-30/">
<s:element name="GetVersionInfo">
<s:complexType />
</s:element>
<s:element name="GetVersionInfoResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetVersionInfoResult" type="tns:ArrayOfVersionInfo" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfVersionInfo">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="VersionInfo" nillable="true" type="tns:VersionInfo" />
</s:sequence>
</s:complexType>
<s:complexType name="VersionInfo">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Component" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Version" type="s:string" />
</s:sequence>
</s:complexType>
<s:element name="CustomerInfoHeader" type="tns:CustomerInfoHeader" />
<s:complexType name="CustomerInfoHeader">
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="CustomLogEntry" type="s:short" />
</s:sequence>
</s:complexType>
<s:element name="UserInfoHeader" type="tns:UserInfoHeader" />
<s:complexType name="UserInfoHeader">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Culture" type="tns:CultureInfo" />
<s:element minOccurs="1" maxOccurs="1" name="DefaultDistanceUnit" type="tns:DistanceUnit" />
<s:element minOccurs="0" maxOccurs="1" name="Context" type="tns:CountryRegionContext" />
</s:sequence>
</s:complexType>
<s:complexType name="CultureInfo">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="1" maxOccurs="1" name="Lcid" type="s:int" />
</s:sequence>
</s:complexType>
<s:simpleType name="DistanceUnit">
<s:restriction base="s:string">
<s:enumeration value="Kilometer" />
<s:enumeration value="Mile" />
</s:restriction>
</s:simpleType>
<s:complexType name="CountryRegionContext">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="0" name="EntityID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="Iso2" type="s:string" />
</s:sequence>
</s:complexType>
<s:element name="GetCountryRegionInfo">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="entityIDs" type="tns:ArrayOfInt" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfInt">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="int" type="s:int" />
</s:sequence>
</s:complexType>
<s:element name="GetCountryRegionInfoResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetCountryRegionInfoResult" type="tns:ArrayOfCountryRegionInfo" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfCountryRegionInfo">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="CountryRegionInfo" nillable="true" type="tns:CountryRegionInfo" />
</s:sequence>
</s:complexType>
<s:complexType name="CountryRegionInfo">
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="EntityID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="LatLong" type="tns:LatLong" />
<s:element minOccurs="0" maxOccurs="1" name="Iso2" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Iso3" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="FriendlyName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="OfficialName" type="s:string" />
</s:sequence>
</s:complexType>
<s:complexType name="LatLong">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="0" name="Latitude" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0" name="Longitude" type="s:double" />
</s:sequence>
</s:complexType>
<s:element name="GetEntityTypes">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dataSourceName" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetEntityTypesResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetEntityTypesResult" type="tns:ArrayOfEntityType" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfEntityType">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="EntityType" nillable="true" type="tns:EntityType" />
</s:sequence>
</s:complexType>
<s:complexType name="EntityType">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="DisplayName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="ParentName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Definition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Properties" type="tns:ArrayOfEntityProperty" />
</s:sequence>
</s:complexType>
<s:complexType name="ArrayOfEntityProperty">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="Property" nillable="true" type="tns:EntityProperty" />
</s:sequence>
</s:complexType>
<s:complexType name="EntityProperty">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="DisplayName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="DataType" type="s:string" />
</s:sequence>
</s:complexType>
<s:element name="GetDataSourceInfo">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dataSourceNames" type="tns:ArrayOfString" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfString">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="string" nillable="true" type="s:string" />
</s:sequence>
</s:complexType>
<s:element name="GetDataSourceInfoResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetDataSourceInfoResult" type="tns:ArrayOfDataSource" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfDataSource">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="DataSource" nillable="true" type="tns:DataSource" />
</s:sequence>
</s:complexType>
<s:complexType name="DataSource">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Version" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Description" type="s:string" />
<s:element minOccurs="1" maxOccurs="1" name="Capability" type="tns:DataSourceCapability" />
<s:element minOccurs="0" maxOccurs="1" name="EntityExtent" type="tns:ArrayOfInt" />
</s:sequence>
</s:complexType>
<s:simpleType name="DataSourceCapability">
<s:list>
<s:simpleType>
<s:restriction base="s:string">
<s:enumeration value="CanDrawMaps" />
<s:enumeration value="CanFindPlaces" />
<s:enumeration value="CanFindNearby" />
<s:enumeration value="CanRoute" />
<s:enumeration value="CanFindAddress" />
<s:enumeration value="HasIcons" />
<s:enumeration value="DataServiceQuery" />
</s:restriction>
</s:simpleType>
</s:list>
</s:simpleType>
<s:element name="GetGreatCircleDistances">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="latLongs" type="tns:ArrayOfLatLong" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfLatLong">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="LatLong" nillable="true" type="tns:LatLong" />
</s:sequence>
</s:complexType>
<s:element name="GetGreatCircleDistancesResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetGreatCircleDistancesResult" type="tns:ArrayOfDouble" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="ArrayOfDouble">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="double" type="s:double" />
</s:sequence>
</s:complexType>
<s:element name="Find">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindSpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindSpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="InputPlace" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="EntityTypeNames" type="tns:ArrayOfString" />
<s:element minOccurs="0" maxOccurs="1" name="Options" type="tns:FindOptions" />
</s:sequence>
</s:complexType>
<s:complexType name="FindOptions">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Range" type="tns:FindRange" />
<s:element minOccurs="1" maxOccurs="1" name="SearchContext" type="s:int" />
<s:element minOccurs="1" maxOccurs="1" name="ResultMask" type="tns:FindResultMask" />
<s:element minOccurs="0" maxOccurs="1" default="0.85" name="ThresholdScore" type="s:double" />
</s:sequence>
</s:complexType>
<s:complexType name="FindRange">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="0" name="StartIndex" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" default="25" name="Count" type="s:int" />
</s:sequence>
</s:complexType>
<s:simpleType name="FindResultMask">
<s:list>
<s:simpleType>
<s:restriction base="s:string">
<s:enumeration value="LatLongFlag" />
<s:enumeration value="EntityFlag" />
<s:enumeration value="AddressFlag" />
<s:enumeration value="BestMapViewFlag" />
<s:enumeration value="MatchDetailsFlag" />
</s:restriction>
</s:simpleType>
</s:list>
</s:simpleType>
<s:element name="FindResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="FindResult" type="tns:FindResults" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindResults">
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="NumberFound" type="s:int" />
<s:element minOccurs="1" maxOccurs="1" name="StartIndex" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="Results" type="tns:ArrayOfFindResult" />
<s:element minOccurs="1" maxOccurs="1" name="TopScore" type="s:double" />
</s:sequence>
</s:complexType>
<s:complexType name="ArrayOfFindResult">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FindResult" nillable="true" type="tns:FindResult" />
</s:sequence>
</s:complexType>
<s:complexType name="FindResult">
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="Score" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" name="FoundLocation" type="tns:Location" />
</s:sequence>
</s:complexType>
<s:complexType name="Location">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="LatLong" type="tns:LatLong" />
<s:element minOccurs="0" maxOccurs="1" name="Entity" type="tns:Entity" />
<s:element minOccurs="0" maxOccurs="1" name="Address" type="tns:Address" />
<s:element minOccurs="0" maxOccurs="1" name="BestMapView" type="tns:MapViewRepresentations" />
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
</s:sequence>
</s:complexType>
<s:complexType name="Entity">
<s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="ID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="DisplayName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="TypeName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Properties" type="tns:ArrayOfEntityPropertyValue" />
</s:sequence>
</s:complexType>
<s:complexType name="ArrayOfEntityPropertyValue">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="Property" nillable="true" type="tns:EntityPropertyValue" />
</s:sequence>
</s:complexType>
<s:complexType name="EntityPropertyValue">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Value" />
</s:sequence>
</s:complexType>
<s:complexType name="Address">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="AddressLine" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="PrimaryCity" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="SecondaryCity" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Subdivision" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="PostalCode" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="CountryRegion" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="FormattedAddress" type="s:string" />
</s:sequence>
</s:complexType>
<s:complexType name="MapViewRepresentations">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="ByScale" type="tns:ViewByScale" />
<s:element minOccurs="0" maxOccurs="1" name="ByHeightWidth" type="tns:ViewByHeightWidth" />
<s:element minOccurs="0" maxOccurs="1" name="ByBoundingRectangle" type="tns:ViewByBoundingRectangle" />
</s:sequence>
</s:complexType>
<s:complexType name="ViewByScale">
<s:complexContent mixed="false">
<s:extension base="tns:MapView">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="0" name="MapScale" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" name="CenterPoint" type="tns:LatLong" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:complexType name="MapView" abstract="true" />
<s:complexType name="ViewByBoundingLocations">
<s:complexContent mixed="false">
<s:extension base="tns:MapView">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Locations" type="tns:ArrayOfLocation" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:complexType name="ArrayOfLocation">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="Location" nillable="true" type="tns:Location" />
</s:sequence>
</s:complexType>
<s:complexType name="ViewByHeightWidth">
<s:complexContent mixed="false">
<s:extension base="tns:MapView">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="0" name="Height" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0" name="Width" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" name="CenterPoint" type="tns:LatLong" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:complexType name="ViewByBoundingRectangle">
<s:complexContent mixed="false">
<s:extension base="tns:MapView">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="BoundingRectangle" type="tns:LatLongRectangle" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:complexType name="LatLongRectangle">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Southwest" type="tns:LatLong" />
<s:element minOccurs="0" maxOccurs="1" name="Northeast" type="tns:LatLong" />
</s:sequence>
</s:complexType>
<s:complexType name="MapPointConstants">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="6378.2" name="EarthRadiusInKilometers" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="3.1415926535897931" name="Pi" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0.017453292519943295" name="RadiansPerDegree" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="57.295779513082323" name="DegreesPerRadian" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0.621371192237334" name="MilesPerKilometer" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="1.609344" name="KilometersPerMile" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0.0003048" name="KilometersPerFoot" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="3280.8398950131232" name="FeetPerKilometer" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0.85" name="FindScoreThreshold" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="96" name="AssumedDpi" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" default="3.280839895013123" name="FeetPerMeter" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" default="0.3048" name="MetersPerFoot" type="s:double" />
</s:sequence>
</s:complexType>
<s:complexType name="SpatialFilter" abstract="true" />
<s:complexType name="LatLongSpatialFilter">
<s:complexContent mixed="false">
<s:extension base="tns:SpatialFilter">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="LatLong" type="tns:LatLong" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:complexType name="LatLongRectangleSpatialFilter">
<s:complexContent mixed="false">
<s:extension base="tns:SpatialFilter">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="BoundingRectangle" type="tns:LatLongRectangle" />
<s:element minOccurs="1" maxOccurs="1" name="PolygonRectangleRelation" type="tns:SpatialRelation" />
</s:sequence>
</s:extension>
</s:complexContent>
</s:complexType>
<s:simpleType name="SpatialRelation">
<s:restriction base="s:string">
<s:enumeration value="WithinArea" />
<s:enumeration value="TouchesArea" />
</s:restriction>
</s:simpleType>
<s:element name="CustomerInfoFindHeader" type="tns:CustomerInfoFindHeader" />
<s:complexType name="CustomerInfoFindHeader">
<s:complexContent mixed="false">
<s:extension base="tns:CustomerInfoHeader" />
</s:complexContent>
</s:complexType>
<s:element name="UserInfoFindHeader" type="tns:UserInfoFindHeader" />
<s:complexType name="UserInfoFindHeader">
<s:complexContent mixed="false">
<s:extension base="tns:UserInfoHeader" />
</s:complexContent>
</s:complexType>
<s:element name="FindAddress">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindAddressSpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindAddressSpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="InputAddress" type="tns:Address" />
<s:element minOccurs="0" maxOccurs="1" name="Options" type="tns:FindOptions" />
</s:sequence>
</s:complexType>
<s:element name="FindAddressResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="FindAddressResult" type="tns:FindResults" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="ParseAddress">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="inputAddress" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="countryRegion" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="ParseAddressResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="ParseAddressResult" type="tns:Address" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="GetLocationInfo">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="location" type="tns:LatLong" />
<s:element minOccurs="0" maxOccurs="1" name="dataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="options" type="tns:GetInfoOptions" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="GetInfoOptions">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" default="true" name="IncludeAddresses" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" default="true" name="IncludeAllEntityTypes" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="EntityTypesToReturn" type="tns:ArrayOfString" />
</s:sequence>
</s:complexType>
<s:element name="GetLocationInfoResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetLocationInfoResult" type="tns:ArrayOfLocation" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="FindNearby">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindNearbySpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindNearbySpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="LatLong" type="tns:LatLong" />
<s:element minOccurs="1" maxOccurs="1" name="Distance" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" name="Filter" type="tns:FindFilter" />
<s:element minOccurs="0" maxOccurs="1" name="Options" type="tns:FindOptions" />
</s:sequence>
</s:complexType>
<s:complexType name="FindFilter">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="EntityTypeName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="PropertyNames" type="tns:ArrayOfString" />
<s:element minOccurs="0" maxOccurs="1" name="WhereClause" type="tns:WhereClause" />
<s:element minOccurs="0" maxOccurs="1" name="SortProperties" type="tns:ArrayOfSortProperty" />
<s:element minOccurs="0" maxOccurs="1" name="Expression" type="tns:FilterExpression" />
</s:sequence>
</s:complexType>
<s:complexType name="WhereClause">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="SearchProperties" type="tns:ArrayOfEntityPropertyValue" />
<s:element minOccurs="1" maxOccurs="1" name="SearchOperator" type="tns:SearchOperatorFlag" />
</s:sequence>
</s:complexType>
<s:simpleType name="SearchOperatorFlag">
<s:restriction base="s:string">
<s:enumeration value="And" />
<s:enumeration value="Or" />
</s:restriction>
</s:simpleType>
<s:complexType name="ArrayOfSortProperty">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="SortProperty" nillable="true" type="tns:SortProperty" />
</s:sequence>
</s:complexType>
<s:complexType name="SortProperty">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="PropertyName" type="s:string" />
<s:element minOccurs="1" maxOccurs="1" name="Direction" type="tns:SortDirection" />
</s:sequence>
</s:complexType>
<s:simpleType name="SortDirection">
<s:restriction base="s:string">
<s:enumeration value="Ascending" />
<s:enumeration value="Descending" />
</s:restriction>
</s:simpleType>
<s:complexType name="FilterExpression">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="Text" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Parameters" type="tns:ArrayOfAnyType" />
</s:sequence>
</s:complexType>
<s:complexType name="ArrayOfAnyType">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="anyType" nillable="true" />
</s:sequence>
</s:complexType>
<s:element name="FindNearbyResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="FindNearbyResult" type="tns:FindResults" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="FindByProperty">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindByPropertySpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindByPropertySpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Filter" type="tns:FindFilter" />
<s:element minOccurs="0" maxOccurs="1" name="Options" type="tns:FindOptions" />
</s:sequence>
</s:complexType>
<s:element name="FindByPropertyResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="FindByPropertyResult" type="tns:FindResults" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="FindByID">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindByIDSpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindByIDSpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Filter" type="tns:FindFilter" />
<s:element minOccurs="0" maxOccurs="1" name="Options" type="tns:FindOptions" />
<s:element minOccurs="0" maxOccurs="1" name="EntityIDs" type="tns:ArrayOfInt" />
</s:sequence>
</s:complexType>
<s:element name="FindByIDResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="FindByIDResult" type="tns:FindResults" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="FindNearRoute">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="specification" type="tns:FindNearRouteSpecification" />
</s:sequence>
</s:complexType>
</s:element>
<s:complexType name="FindNearRouteSpecification">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="DataSourceName" type="s:string" />
<s:element minOccurs="1" maxOccurs="1" name="Distance" type="s:double" />
<s:element minOccurs="0" maxOccurs="1" name="Filter" type="tns:FindFilter" />
<s:element minOcc

Problem integrating BPM Process Spaces with Webcenter Spaces PS5

Good Day!
I have currently installed a fresh build of Webcenter 11.1.1.6 stack in a single domain which contains:
1.)     UCM
2.)     Spaces
3.)     SOA with BPM
After configuring process-portal-install.properties, I have run the ant –f install.xml command which will integrate Process Spaces into Webcenter Spaces.
The problem currently I am facing is that after seeing the process spaces link in Webcenter Spaces, I am also being redirected to internal problem and seeing the logs, I have something like:
[2012-06-11T16:28:43.918-07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 81caeefafba8cb1a:-15b44550:137ddb9ada0:-8000-000000000000022e,0] [APP: webcenter#11.1.1.4.0] [[
oracle.adf.controller.ControllerException: ADFC-06002: unhandled exception
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:640)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:235)
at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1387)
at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:474)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:392)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:241)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
Caused by: oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/processApplicationsTaskflow.xml'.
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:473)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:372)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:183)
at oracle.adf.controller.internal.metadata.MetadataService.getTaskFlowDefinition(MetadataService.java:239)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition(TaskFlowCallActivityLogic.java:1072)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeTaskFlow(TaskFlowCallActivityLogic.java:224)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:217)
... 92 more
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/processApplicationsTaskflow.xml"
at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1331)
at oracle.mds.core.MDSSession.getBaseMO(MDSSession.java:3200)
at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1190)
at oracle.mds.core.MOResolver.getMetadataObjects(MOResolver.java:218)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:421)
... 98 more
I would like to ask if there is a support link or solution to this problem I am facing such that I may able to see BPM Process Spaces in Webcenter Spaces.

Hi Jeff,
Its looking that BPM was not correctly configured for some reason, exact root cause could not be pinpointed. You can try following two things:-
1. Run the following ant command and restart the Admin and managed servers
ant -f install.xml post-install -DpiArgs -importGSOnly
2. If Oracle BPM and WebCenter have been configured in different domains, configure Trusted Domain Credentials in both the Oracle BPM and WebCenter domains.
http://docs.oracle.com/cd/E23943_01/web.1111/e13707/domain.htm#SECMG404
If issue is still there, you can open the SR with Oracle and also have a look on following bug that is released on 24-May-2012.
Bug 13894890 : [SUP] ERROR NO METADATA FOUND FOR METADATA OBJECT "/WEB-INF/PROCESSAPPLICATIONST
Regards,
Imran

Problems in jolt 1.2 with weblogic 6.1

Hi,
I am trying configure a jolt pool connection on startup of weblogic server.
I am using weblogic 6.1, tuxedo 6.5 server y jolt 1.2.
JSL is started.
I have copy $WL_HOME/classes/bea/jolt/pool from weblogic 5.1 to weblogic 6.1
I have defined a jolt pool, a startup class and a shutdown class.
I have not any problem on weblogic startup:
<Jan 13, 2003 5:21:06 PM CET> <Info> <WebLogicServer> <Invoking startup class:
bea.jolt.pool.servlet.weblogic.PoolManagerStartUp.startup(poolname=simpapp,appaddrlist=//69.51.23.140:13398,failoverlist=//69.51.23.140:13414,minpoolsize=1,maxpoolsize=15)>
<Jan 13, 2003 5:21:07 PM CET> <Info> <WebLogicServer> <bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
reports: Jolt Session Pool: simpapp initialized>
The problem is when a servlet try:
private SessionPoolManager b_mgr;
Environment env = new Environment();
Context ctx = env.getInitialContext();
b_mgr = (SessionPoolManager) ctx.lookup(SessionPoolManager.POOLMANAGER_NAME);
SessionPool session = (SessionPool) b_mgr.getSessionPool("simpapp");
The object session is always null.
Thx in advance

Shashi,
Tuxedo 6.5 needs a patch to run on later versions of Solaris or else the WSNAT_CAT:1008 or JOLT_CAT:1008 "Error: Could not establish listening address on network +netaddr+" message can occur.
The thread Could not establish listening address on network describes a similar problem with the WSL, and the ULOG in that thread also indicates "TUXEDO Version 6.5 SunOS 5.5.1".
Please obtain the latest rolling patch from Oracle support. (It would be even better to upgrade to a later release of Tuxedo, since Tuxedo 6.5 is past its end of life date on Solaris. Hopefully whatever compilation problems you are having with later Tuxedo releases can be resolved fairly easily.)
Regards,
Ed

Problem in getting Time info with webLogic using Oracle Thin Driver

We have a servlet to store/retrieve date/time data from an Oracle 9i db using use the Oracle thin driver. Everyting is ok when run on JSDK2.1 servlet container or Tomcat. But when run under WebLogic 8.1, we have problem with time portion info, it is lost. After debuging, we found under WebLogic, the returned object type is a java.sql.Date which by definition has no time info, while in other servlet containers, it is a java.sql.Timestamp. Storing date/time data in a Date column is ok under WebLogic because we see the time portion data in the db table. We did not set anything about database/jdbc in WebLogic.
It would be greatly appreciated if someone can explain what effect WebLogic has on a servlet that has its own jdbc connection or how WebLogic could change data type from a jdbc sql statement.

That's a function of the JDBC driver, not the J2EE app server.
Sounds like maybe you're using the WebLogic 8.1 driver when you deploy with WL instead of the Oracle driver. You certainly can deploy with the Oracle driver. Go into the WL config manager and set it up to use the ojdbc14.jar instead.
%

Integration 8.1 Works with Weblogic 9.2???

Hi,
I am trying to find out if the latest version of the Integration works with the new released Weblogic 9.2.
I suppose Integration will come with BEA its own IDE and is not Eclipse based.
Can we deploy an 8.1 Inegration Project on weblogic 9.2?
Any answer will be the most appreciated.
Thanks a lot,
Alexandru

I'm pretty certain that a WLI 8.1 project will not work with WLS 9.2.
From what I understand (from public info), the next release of WLI will be version 9.2, and that should come out later this year. The IDE for it will be Workshop for WebLogic, which is Eclipse-based.

Problem setting up APEX 4 with WebLogic and Oracle XE

I'm am trying to install and test Application Express 4 (latest version) on a brand new installation of Oracle WebLogic Server and Oracle XE.
I have followed the Installation Guide for APEX and have successfully installed all tables and scripts into my Oracle XE schema and am able to connect to the Application Express Workspace login page (http://localhost:8080/apex) but am not able to log in. All styles and images are missing.
I have followed the steps in the Application Express Listener Guide to install the Listener to my WebLogic deployments and have my i.war and apex.war files deployed but these apparently are not working. When I go to my WebLogic server and view the /apex/ListenerConfigure page I can see the page but get an HTTP 404 "Page Not Found" error and appears to be looking for the WLS's apex/apex directory.
Note: My Oracle XE / APEX setup is on a separate server than my WebLogic server.
Also, I see the APEX Listener file (apex-confix.xml) from the install zip file but I don't believe it is being used anywhere, as the documentation never told me what to do with it.
Any help would be awesome. Let me know what I can provide that I haven't. Thanks!

Thank you, I was able to use what you said as well as this information here: Installing Apex 4 on Oracle XE: Almost there, but no cigar yet!
Thank you for the help :)

Problems integrating JSF managed bean with Session EJB with JDeveloper

HI All,
I am developeing a JSF-EJB application using Jdeveloper11g. On deploying the application I am getting the following errors on deployment.
<19/08/2010 2:53:49 PM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1282193629318' for task '17'. Error is: 'weblogic.application.ModuleException: Could not setup environment'
weblogic.application.ModuleException: Could not setup environment
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: [J2EE:160101]Error: The ejb-link 'MetaDataBean' declared in the ejb-ref or ejb-local-ref 'MetaData' in the application module 'ViewControllerWebApp.war' could not be resolved. The target EJB for the ejb-ref could not be found. Please ensure the link is correct.
     at weblogic.deployment.BaseEnvironmentBuilder.addEJBLinkRef(BaseEnvironmentBuilder.java:453)
     at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:485)
     at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
     at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
     Truncated. see log file for complete stacktrace
>
<19/08/2010 2:53:49 PM EST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'data-catalog'.>
<19/08/2010 2:53:49 PM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'data-catalog'.>
<19/08/2010 2:53:49 PM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Could not setup environment
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: [J2EE:160101]Error: The ejb-link 'MetaDataBean' declared in the ejb-ref or ejb-local-ref 'MetaData' in the application module 'ViewControllerWebApp.war' could not be resolved. The target EJB for the ejb-ref could not be found. Please ensure the link is correct.
     at weblogic.deployment.BaseEnvironmentBuilder.addEJBLinkRef(BaseEnvironmentBuilder.java:453)
     at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:485)
     at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
     at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
     Truncated. see log file for complete stacktrace
Thanks
Edited by: user5108636 on 18/08/2010 22:46

Please find attached the source code of JSF managed bean, local business interface, session bean and web.xml
MANAGED BEAN_
package view.backing;
import java.util.List;
import javax.ejb.EJB;
import javax.faces.component.UISelectItems;
import javax.faces.component.html.HtmlSelectManyListbox;
import model.ejb.session.MetaDataBean;
public class SearchMetaDataBean {
@EJB MetaDataBean metaDataService;
private List<String> tables;
private List<String> columns;
private HtmlSelectManyListbox selectManyListbox1;
private UISelectItems selectItems1;
public void setTables(List<String> tables) {
this.tables = tables;
public List<String> getTables() {
return metaDataService.getTables();
public void setColumns(List<String> columns) {
this.columns = columns;
public List<String> getColumns() {
return columns;
public void setSelectManyListbox1(HtmlSelectManyListbox selectManyListbox1) {
this.selectManyListbox1 = selectManyListbox1;
public HtmlSelectManyListbox getSelectManyListbox1() {
return selectManyListbox1;
public void setSelectItems1(UISelectItems selectItems1) {
this.selectItems1 = selectItems1;
public UISelectItems getSelectItems1() {
return selectItems1;
LOCAL INTERFACE_
package model.ejb.session;
import java.util.List;
import javax.ejb.Local;
@Local
public interface MetaDataLocal {
public List<String> getTables();
public List<String> getColumns(String tableName);
SESSION BEAN_
package model.ejb.session;
import javax.ejb.Local;
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.annotation.PostConstruct;
import javax.annotation.Resource;
import javax.ejb.Stateless;
import javax.sql.DataSource;
@Stateless(name="MetaData")
@Local
public class MetaDataBean implements MetaDataLocal{
@Resource(name="jdbc/DWDS")
private DataSource dataSource;
private Connection connection;
private List<String> tables = new ArrayList<String>();
private List<String> columns = new ArrayList<String>();
private DatabaseMetaData dmd;
@PostConstruct
public void initialize(){
try{
connection = dataSource.getConnection();
DatabaseMetaData dmd;
dmd = connection.getMetaData();
}catch(SQLException sqle){
sqle.printStackTrace();
public MetaDataBean() {
public List<String> getTables(){
try{
if (dmd ==null){
//System.out.println("Database meta data not available");
tables.add("None");
}else{
ResultSet rs = dmd.getSchemas();
ResultSet rs1 = null;
while(rs.next()) {
if (rs.getString(1).equalsIgnoreCase("AV_DATA")){
rs1 = dmd.getTables(null,rs.getString(1),"%",null);
while(rs1.next()) {
tables.add(rs1.getString(3));
}catch (SQLException sqle){
sqle.printStackTrace();
return tables;
public List<String> getColumns(String tableName){
try{
ResultSet rsColumns = dmd.getColumns("", "AV_DATA", tableName, null);
while(rsColumns.next()){
columns.add(rsColumns.getString(4));
}catch (SQLException sqle){
sqle.printStackTrace();
return columns;
WEB.XML_
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<ejb-local-ref>
<ejb-ref-name>MetaData</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local>model.ejb.session.MetaDataLocal</local>
<ejb-link>MetaDataBean</ejb-link>
</ejb-local-ref>
</web-app>
Edited by: user5108636 on 18/08/2010 22:45
Edited by: user5108636 on 18/08/2010 22:46

Problem in web.xml file with weblogic server 8.1

Hi frnds,
I was deployed one Enterprise Application,it deploys successfully. But in server side thows Exeception in web.xml file.
Here the actual Exception
<HTTP> <BEA-101248> <[Application:
'G:\bea\user_projects\domains\mydomain\myserver\upload\jasmine.ear', Module: 'Ja
smine']: Deployment descriptor "web.xml" is malformed. Check against the DTD: or
g.xml.sax.SAXParseException: The content of element type "web-app" must match "(
icon?,display-name?,description?,distributable?,context-param*,filter*,filter-ma
pping*,listener*,servlet*,servlet-mapping*,session-config?,mime-mapping*,welcome
-file-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-constra
int*,login-config?,security-role*,env-entry*,ejb-ref*,ejb-local-ref*)". (line 61
, column 11).>
My web.xml file as follws....
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.4//EN"
"http://java.sun.com/dtd/web-app_2_4.dtd">
<web-app>
<display-name>Jasmine Applications</display-name>
<description>
Jasmine Applications
</description>
<servlet>
<servlet-name>LoginServlet</servlet-name>
<servlet-class>examples.LoginServlet</servlet-class>
<init-param>
<param-name>java.naming.factory.initial</param-name>
<param-value>weblogic.jndi.WLInitialContextFactory</param-value>
</init-param>
<init-param>
<param-name>java.naming.provider.url</param-name>
<param-value>t3://localhost:7001</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>ShowQuoteServlet</servlet-name>
<servlet-class>examples.ShowQuoteServlet</servlet-class>
<init-param>
<param-name>java.naming.factory.initial</param-name>
<param-value>weblogic.jndi.WLInitialContextFactory</param-value>
</init-param>
<init-param>
<param-name>java.naming.provider.url</param-name>
<param-value>t3://localhost:7001</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>CatalogServlet</servlet-name>
<servlet-class>examples.CatalogServlet</servlet-class>
<init-param>
<param-name>java.naming.factory.initial</param-name>
<param-value>weblogic.jndi.WLInitialContextFactory</param-value>
</init-param>
<init-param>
<param-name>java.naming.provider.url</param-name>
<param-value>t3://localhost:7001</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>LoginServlet</servlet-name>
<url-pattern>/login/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ShowQuoteServlet</servlet-name>
<url-pattern>/showQuote/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>CatalogServlet</servlet-name>
<url-pattern>/catalog/*</url-pattern>
</servlet-mapping>
<security-constraint>
<web-resource-collection>
<web-resource-name>My secure resources</web-resource-name>
<description>Resources to be placed under security control.</description>
<url-pattern>/private/*</url-pattern>
<url-pattern>/registered/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>guest</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>WebApp</realm-name>
<form-login-config>
<form-login-page>/login.jsp</form-login-page>
<form-error-page>/error.jsp</form-error-page>
</form-login-config>
</login-config>

<security-role>
<description>The role allowed to access our content</description>
<role-name>guest</role-name>
</security-role>
</web-app>
pls give me a good solution this exception.. I tried lot..
Thanks in Advance
Regards
Priya

Your DOCTYPE references 2.4, it should be 2.3. WLS 8.1 supports J2EE 1.3 which was servlet 2.3.
Servlet 2.4 is part of J2EE 1.4 and is supported by WLS 9.0/9.1. Also it uses XML Schema not a DTD.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Integration of J2EE application with weblogic portal

Hi guys,
I have an application hosted on an iplanet web server. This application uses servlet 2.2, jsp 1.1 of J2EE platform.
And I have a microsoft application running on .NET platform.
I want integrate above 2 applications into webloigc 8.1 portal. What are the different ways in which i can do this and where can i find specific material on this.
advance thanks for your help
gopaluni

Basically I am saying that your options are
1. Screenscraping the apps into portlets
2. Using SSO to login to the apps, but keepin them separate
3. Using Web Services to consume parts of the apps and exposing those as portlets
For our application we do 2 and 3. In many cases we just create portlets that represents views into other j2ee apps. When the users click on something, we launch the j2ee app in a popup browser. The users are already signed on, and taken to a specific detail page, add page or something within the app directly.
Hope this helps.
Kunal

Integration of Commons Logging framework with Weblogic

Hi,
We are trying to use Apache commons logging framework and trying to publish log mesages in Weblogic so that messages can be seen through console and all the Logging configurations can be managed from Admin console. I tried using the below steps:
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html#using_commons
But these does not seems to be working for User defined handlers. I am able to see the logs in the default odl-handler file but not able to log the messages through the handlers defined by me.
Can anyone help me on this.
Regards,
Anuj

Hi,
We are able to see reports through Workspace. We are facing problem after
integrating Hyperion Interactive Reporting with Weblogic Portal. we are able to see the sections like Query,Report,Results but we are not able to see the content after selecting any one of the section mentioned above.
System Configuration:
Hyperion Interactive Reporting 9.3.1
App Server: Weblogic server 9.2
Web Server: Apache 2.0.52
Database: Oracle 9.0.1.
Operating System: Windows 2003 with SP1
Browser: I.E 6.0
With Workspace everything is working fine. After Integration we are facing problem.
Regards,
S.Suresh.

Issue while integrating external LDAP with weblogic

Hi,
i am trying integrating external LDAP (OpenLdap) with weblogic 10.3. I created a provider and provided required credentials and able to see users and group of the LDAP into the weblogic console. I am also able to login in the weblogic console with the users available in the LDAP after assigning the admin role to the ldap group. But i when i see the user's property (by clicking on the user in the admin console) it only shows the tabs for General, Password and Group only. on the other hand if i see the users from DefaultAuthenticator, it shows the Attribute tab apart from the General, Password and Group.
Can anyone let me knwo how can we get the Attribute tab for the Ldap users.
thx,
Ajay

Hi Ajay
By default Weblogic has READ ONLY adapters for any External Security Providers that are configured like any AD Providers. READ ONLY means, you can only read the data from the ldap but not modify it, hence may be its not showing the Attributes tag. For Default Authenticator, see the first paragraph note in Attributes tab, that says the same thing. NOW, may be WLS can atleast show Attributes in READ only format, but it needs some sort of mappings to be defined. Say on Weblogic side, we have like firstName, lastName which on any typical AD will be like sn (surname = lastname), givenname (firstname) etc etc. This mapping is tough to generalize.
One thing for sure is, from Weblogic you cannot modify or edit any attributes for any user in external AD. If you really want to get those attributes, you may need to use some javax.ldap apis or some 3rd party ready to use tools/apis. I remember Weblogic Portal has a facility to configure a xml file that defines attributes mapping and get all attributes for any user. But again thats in Weblogic Portal product and not part of weblogic server.
If you have any SOA Software, they have some utilities for the same.
Thanks
Ravi Jegga

Has anyone integrated Netegrity with WebLogic ?

Hello:
Has anyone integrated Netegrity's SiteMinder with WebLogic ? I am curious to
see how well it integrates and if there are any 'real world' experiences.
Thanks.
-Sunil .K

Send this to:
newsgroups.bea.com / security-group.

Facing problem in integrating my custom jsp with the workflow engine

Hi,
I am using Jdeveloper 11.1.1.6.0 for BPM 11g implementation on my Application.I have Weblogic Server 10.3 Installed and configured the domain. Also the server is up and running.
I am trying to create workflow and wants to integrate it with my custom jsp but i am facing problem in integrating my custom jsp with the workflow engine.Can you please answer the following questions:
1)how to link BPM human task with my custom jsp (Requester jsp).
2)how my custom jsp data(Requester data) will be stored in workflow engine and how the same data will be visible to the next custom jsp(Reviewer jsp).
This is urgent .Any early reply will be great help.
Thanks in advance.
Edited by: 990133 on Mar 24, 2013 5:31 AM

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

Problem integrating JProbe 4.0 with Weblogic 4.5.1

Similar Messages

Maybe you are looking for