Problem while install forms 11g

dear sirs
when i install forms and report 11g it give me error about jvm, and i try to install java se to solve the problem, but problem still
pls tell me how to solve or how to install this jvm, known that i use operating system windows 7 64bit

The problem is that you are trying to install a version of Forms 11g which needs a 64 bits JVM and you have a 32 bits JVM.
So you should install a 64 bits JDK and a 64 bits Weblogic (because the weblogic that comes with jdeveloper is a 32 bits weblogic).
Then you will be able to install the Forms you are trying to install, also look at this link to set the JAVA_HOME if you are installing on windows:
https://confluence.atlassian.com/display/CONF25/Set+JAVA_HOME+variable+in+Windows
Regards
Carlos

Similar Messages

Problem with installing Forms 11g on clients

Hi all,
I have successfuly installed weblogic server and Oracle Forms 11g on a server and everything works fine. I need to install Forms 11g on different clients for developers. My question is that do i need to install Weblogic on every single client or i can use the one that i have installed on my server. If i can use the one that i have installed, please explain how i can do this because i have tried a lot and the installer does not go to next page after asking for email address.
Thanks in forward,
Shademani
p.s. The clients are Win Xp

Two recommendations:
1. Read this:
http://blogs.oracle.com/shay/2007/03/02
2. If you are new to the product and/or product version, you should probably read the documentation before starting to install. Here is the url to the installation guide. This is a good starting place.
http://download.oracle.com/docs/cd/E17904_01/install.1111/e10421/toc.htm
The installation guide explains what is needed and how to install.

Problem While installing ODI 11g

Hi,
I have downloaded the latest version of ODI and tried to install but I am getting the following error.
http://2.bp.blogspot.com/-oOb6cVeQq5c/US2ly0p2-pI/AAAAAAAAAeI/3SA8zdP0CO0/s1600/odierror.JPG
I tried three time but faced the same error. I am new to ODI. Please help me to figure out the problem.
Thank you,
Muhammad Nasir

HI
Hope you followed below link screen shot.
http://oracleinstall.wordpress.com/2011/07/14/oracle-data-integrator-11g-installation-linux/
Before ODI 11g installation, please check the prerequisite and start the installation.
Regards,
Phanikanth

Error while installing Forms 11g :checking physical memory

Dear all
I have downloaded oracle fusion middle ware.And i Started set up.
In the prerequisite check an error happens :
Root
Checking operating system certification
Expected result: One of 5.1,5.2,6.0
Actual Result: 5.1
Check complete. The overall result of this check is: Passed
Checking service pack
Expected result: 2
Actual Result: 2
Check complete. The overall result of this check is: Passed
Checking physical memory
Expected result: 1024MB
Actual Result: 996MB
Check complete. The overall result of this check is: Failed <<<<
I use Window xp. I changed the virtual memory for the windows to 3500 MB, and I restated windows. But the error still occurred and the setup failed
Please help me

I never tried installing using 1GB but I acknowledge that it is difficult to install even on a 2GB machine if other programs (the Oracle DB in my case) use a substantial amount of available memory. Once I freed up the physical memory I was consistently able to install F&R

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Installing Forms 11g 64bit on Windows Server 2008 64bit

Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
Mark

FYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark

Error while installing oracle 11g

Hi every I facing problem while installing it is showing error file not found dbhome_4 error
Please help me on this issue so That I will thank hull to you guys.
Thanks in advance
Chandrabhan

Hi,
It sounds you're installing Oracle 11g on Windows 7 64-bit. Have you downloaded 2 install packages prior to start the installation?
Regards,

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Problem while installing CS6, Please Help

Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

Hi,
Please share your system configuration on which you are trying to install Ps CS6.
Regards,
Ashutosh
Ps Installer QE

Problem while installing solaris 10 on HP proliant DL 380 G5.

Hi,
facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

I have a similar issue trying to load Solaris 10u4 on an IBM x236.
I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
You may have to do something similar.
And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

Re: problem while installing WEB-enyterprise

Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Unsuccessful attempt to install FORMS 11g

Hello all,
OS: Windows Server 2008 R2 64 bit
DB: 11gR2
These are the steps I took in my attempt to install FORMS 11g:
1) Install JDK6U22 Windows 64 bit
2) Installs wls1033_generic.jar from http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar
3) Installs RCU from http://download.oracle.com/otn/nt/middleware/11g/ofm_rcu_win32_11.1.1.3.3_disk1_1of1.zip (this is the only place where issue arises. I chose everything except Oracle Adaptive Access Manager and Oracle Adaptive Access Manager (Partition Support) because our test environment is NOT Enterprise version). Another possible issue is the zip files - it's for 32 bit; but I can't find 64bit.
4) Installs Fusion Middleware (all 4 files downloaded) starting from http://download.oracle.com/otn/nt/middleware/11g/ofm_pfrd_win_11.1.1.2.0_64_disk1_1of1.zip
5) Patch with http://download.oracle.com/otn/nt/middleware/11g/ofm_pfrd_win_11.1.1.3.0_64_disk1_1of1.zip
6) Configure using Oracle Classic 11g - Home1, Configure Classic Instance (run as Administrator). Here I unchecked PORTAL and DISCOVERER because I just need FORMS and REPORTS.
7) New rule on firewall to allow port 9001.
Issue:
Move my existing 10g FMX to {directory}\MIDDLEWARE\AS_1\FORMS
http://myservername:9001/forms/frmservelet?form=xxx.fmx doesn't come up.
Move my existing 10g FMX to {directory}\MIDDLEWARE\ASINST_1\FORMSCOMPONENT\FORMS
http://myservername:9001/forms/frmservelet?form=xxx.fmx doesn't come up.
http://localhost:9001/console on the server doesn't return anything. But, Oracle Process Manager (asinst_1) service is started.
Any help is greatly appreciated.
Thanks
-andy-

I started the weblogic from Middleware\user_projects\domains\ClassicDomain\startweblogic.cmd. Annoyingly, I cannot close the Command Prompt and not kill the weblogic console. But I am able to get to http://localhost:7001/console.
However, I cannot start WLS_FORMS and WLS_REPORTS from the console with the following error:
For server WLS_FORMS, the Node Manager associated with machine xxx is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.Came across this Forms 11g - Weblogic Server - Command prompts stay open? but did not say how WLS_FORMS got started. The only suggestion I see in that thread was a suggestion for the Command Prompt annoyance; which is, requiring a service account to keep the command prompt running on the service account logged in.
Another thread http://kr.forums.oracle.com/forums/thread.jspa?threadID=933484 seems to suggest just contact Oracle Support and let them set it up.
I did look at the manual http://download.oracle.com/docs/cd/E14571_01/install.1111/e10421/install.htm#BABHJFIC without much help there.
Edit: Started WLS_FORMS by going to Oracle Classic Instance, Forms Services, Start Weblogic Server - WLS_FORMS. http://localhost:7001/console shows the state for WLS_FORMS as ADMIN. I don't know what that means; but I still can't get to http://localhost:9001/forms/frmservlet
Any other suggestions?
Edited by: apex_disco on Nov 15, 2010 12:29 PM

Have a problem while installing Asmlib packages

hi all
I have some problem while installing ASMlib packages.
my OS=Redhat linux 5.3
kenel version using this command uname -r=2.6.18-128.el5
I have downloaded packages and successfully installed following 4
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
but while installing following got error
rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
thanx in advance

I think you just need below rpms to configure asmlib:
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
Read this thread:
Error install ASMLib on RedHat linux

Problem in installing Forms 6 on Windows 2000

I have problem in installing forms 6 on windows 2000.
Please advise me.
null

Hello,
I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
The only problem is that the Forms Server won't work till the 1st patch set comes out
(only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
null

Problem while install forms 11g

Similar Messages

Maybe you are looking for