Problem with a program that just worked before....
Hello,
(I'm a beginner !)
I have a program to command 2 motors and collect the speed of each axis and the load applied between them.
The hardware works well (checked all the sensors) and the program worked well until 5 days...
Now my problem is : I want to see the load in real time (using a DBL numeric indicator linked to a DAQ Assistant that just collect the load datas)
AND in the DAQ Assistant (double click on it), in see the load in real time when i use the button "RUN/STOP"
but on the front panel, when i click on the button "RUN" the indicator is just fix on the first value and doesn't indicate anything...
I checked the connector between my DAQ and my N. Ind. and I changed the N. Ind. and tried to update the Channels in my DAQ to see if the problem came from that but nothing is repaired now... after 3 days on this problem
Thank you if you can help me...
Solved!
Go to Solution.
Attachments:
front pannel.png 126 KB
front pannel.png 126 KB
DAQ.png 173 KB
A couple of things. I would change your DAQ setup for the force to be "1 Sample (On Demand)", because it appears that you are only reading one sample every time you go through the loop. I would think your other DAQ setups need this too.
I also assume that you are using the loop speed to control the sample rate of your acquisition of the other data channels.
Is all of your acquisition occuring from one card or seperate cards? Some cards don't allow simulatenous tasks/acquisition. I guess the DAQ assistant takes care of that.
You may also want to take a look at the Continous Measurement and Logging Template. It may be well suited for what you are trying to work on.
Similar Messages
-
How to fix problem with Gmail password that was working before and works online?
1. Thunderbird was working fine with my Gmail acct for months, then was unable to send a message, but can still receive incoming messages.
2. I was asked to re-enter my password and this did not fix the problem.
3. I went to Gmail online and logged in to verify my password had not changed. Success.
4. I reset password in Thunderbird, but still couldn't send test message to myself.
5. I deleted account in Thunderbird. Then I added a different Gmail acct that was not in Tbird. Success. Then I sent test email, success.
6. Then I re-added the original Gmail acct, Failure! It found the correct settings automatically, but when it tried to verify password, it failed. I repeated entering the password several times, but still failure.
7. WIN7 64bit HP, Tbird 24.4.0
8. All other AOL accts work fine on Tbird.Matt, thank you very much. You were exactly right. It is so nice to have smart people to help those of us with short memories.
-
Problem with various programs freezing/not working
I'm not sure if it's a problem with the computer itself or with the software, but perhaps someone on here can help me.
For about a week now I've been having problems with various programs on my iMac. These programs include iTunes, Force Quit, Shut Down, Safari, Finder, and certain functions on the keyboard.
The problems I've been having revolve around the programs freezing up when you either first try to operate them or after opening the programs and trying to click on things within the program itself.
A good example: I haven't been able to use iTunes past the point of opening it up. Once I try to play a song, it freezes up and the rainbow wheel comes up and just keeps on spinning for eternity, or until I manually reboot the computer via the power button.
The volume controls on the keyboard don't work at all. When I first boot up the computer, I can press a volume button and the symbol will appear on the screen, but the level won't move up or down and if you press it again after that disappears then it doesn't reappear.
Force Quit and other applications tend to stay on the screen after you click the quit button or other end/cancel button and won't go away until iMac is rebooted manually by button on back.
Safari gets stuck on occasion depending on which site I go to. It happened once when I went to MySpace.com, but only cos of one of the flash sites they were advertising. I went to the same site an hour later and it was fine since it was advertising something else. I have a job site I can't access because when I click on the 'jobs' link to look for a job, it gets 3/4 of the way through the upload and freezes.
And right now I can't tell you which model I have since I can't access the 'About This Mac' info, other than to tell you it's the 20" with 320 GB with Leopard software, Mac OS X v10.5. It gets regular updates.
So... if there's anyone who could help me, I would greatly appreciate it.
Please note, I don't have Apple Care since I can't afford it yet, and I just bought my computer in October 2007. Thanks!Start with http://www.thexlab.com/faqs/multipleappsquit.html
-
Problems with other programs that run bad in processor intel
Hello my friends I bought one mac mini Intel Core duo to optimize my work like designer, but programs like Adobe photoshop, indesing Cs, give me problems and it is put very slow. I have in my office a Powerpc G5 of 1,6 uni processor and have installed same programs. Why they run very slow in mini mac if it has a double processor?
They are running slowly because none of the Adobe products have yet been released in a format native to the Macs with Intel processors. Adobe's applications are all still only native to the PowerPC processor and so must run in the Rosetta PPC emulation mode, which is much slower than native software. Unfortunately, you'll have to live with this until Adobe releases Intel-native versions of their Mac software, currently not scheduled for release until some time in mid-2007.
The same will apply to any other software you have; if it's not what Apple calls a Universal Binary which has the programming code for both PowerPC and Intel-based Macs, it's going to run more slowly than would software that's native to the Intel processors. Check with the application's developer about the availability of an Intel-native version. -
Open With my program doesn't work
I have Java program which runs on PCs and saves files with a special extension. When I double click on a saved file, I would like it to open with my program. This worked before when my program was stored on the C drive. But now I store it more appropriately in the Program Files folder, and it does not work anymore.
If I try to say Open With and browse to my program, it does not show up in the list, so I cannot choose it. Or if I go to Default Programs in the Start menu, click on Associate a file type or protocol with a specific program, select my extension, click on Change program, and browse to my program, again it does not show up in the list, so I still cannot choose it.
I am using Windows Vista, and I am able to make associations with other programs, but not with my program.
How can I make it work? Thanks for your time!Sorry to bother you with this. Yes, this was a Windows problem, not a Java problem.
The solution was to use the Registry Editor. Just for the record, let me post my solution:
For being able to open files with my extension, I had to create a registry in
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts,
including the subkey of the program name in the subfolder OpenWithList
and the subkey of the program id in the subfolder OpenWithProgIds.
And for the program id I had to create another registry entry in HKEY_CLASSES_ROOT,
including the subfolders Shell, Open, and Command, where I placed the
subkey of the directory of my program.
I did all this with my installation program Inno Setup (www.jrsoftware.org). Here is
the code I created with Inno Setup for recognizing my ".ac" extension:
[Registry]
Root: HKCU; Subkey: "Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.ac"; Flags: uninsdeletekeyifempty
Root: HKCU; Subkey: "Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.ac\OpenWithList"; Flags: uninsdeletekeyifempty
Root: HKCU; Subkey: "Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.ac\OpenWithList"; ValueType: string; ValueName: "a"; ValueData: "Ananya.exe"; Flags: uninsdeletekey
Root: HKCU; Subkey: "Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.ac\OpenWithProgIds"; Flags: uninsdeletekeyifempty
Root: HKCU; Subkey: "Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.ac\OpenWithProgIds"; ValueType: binary; ValueName: "AnanyaCurves"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves"; ValueType: string; ValueData: "AnanyaCurves"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell"; ValueType: string; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell\Open"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell\Open"; ValueType: string; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell\Open\Command"; Flags: uninsdeletekey
Root: HKCR; Subkey: "AnanyaCurves\Shell\Open\Command"; ValueType: string; ValueData: """C:\Program Files\AnanyaCurves\Ananya.exe""""%1"""; Flags: uninsdeletekey
Now my program even shows up in the Recommended Programs!
And, by the way, this only worked if I put my extension key in
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts.
It did not work if I tried to put my extension key in HKEY_CLASSES_ROOT. -
New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!
Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
When opening Itunes, after placing my ID and password, I'm getting a message that indicates "Itunes has stopped working. A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available. But I never get a response. Can somebody help?
Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access. -
vine.co can not watch videos on other browsers do not have the problem with firefox firefox there just did not work, delete cookies, history
I think this problem may be caused by Yahoo's changes making it incompatible with the klatest version of FireFox.
This is suddenly affecting many many people who use Firefox and are members of Yahoo Groups. All these people say they themselves changed nothing and have not been locked out before when using Firefox. But suddenly, within the last week, they are.
What did Mozilla do or what did Yahoo do to cause this problem? I can say that I was not blocking cookies and after trying a number of things to fix it, I went to Yahoo's home page and navigated to my group from here.
This problem is not anything a user did. Either Firefox is at fault or Yahoo is. I want to know which company is at fault and when they are going to fix it. -
Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas DijokasWell, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.
JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
-
Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.
juliana
Do you have any version of Premiere Elements 13 or only Photoshop Elements 13 which comes with Elements Organizer 13?
Let us look at the following for Elements Organizer 13....
1. Deletion of disabling the Elements Organizer 13 setting file which is named psa.prf. In Windows 7, 8, o 8.1 64 bit, it is found in the
path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the above gains you successful entry into the Elements Organizer 13, then you can
a. create a new catalog
and/or
b. repair or optimize the current one
See Elements Organizer 13/File Menu/Manage Catalogs/Catalog Manager.
3. There are times that certain formats will bring the Elements Organizer down when you try to import those formats into
it. But, from what you wrote, your current problems do not sound media related.
3. At your earliest opportunity, please update Elements Organizer 13 to 13.1 using its Help Menu/Updates.
Please review and consider and then let us know the outcome.
Thank you.
ATR -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.Send it as html so the signature is an image source URL
-
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
-
i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks
That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.
Maybe you are looking for
-
Itunes 12.0.1 for Windows (64-bit) is Unresponsive
I just updated to itunes 12.0.1 for Windows (64-bit) (Running windows 8) As soon as I start the front screen is loaded but the program is unresponsive. In task manager it says it's a 32bit program (not sure why it is advertised as 64bit!?)... I trie
-
Equium A210-1C4: Winload.exe problem after using product recovery disk
Hi There I Could really do with some help here. I have a Toshiba Equium A210-1C4 Laptop. Partitioned drive with Vista home premium service pack 4.0. Last night I used the product recovery disk supllied with the laptop to try and restore it back to it
-
I am trying to read TDMS files directly into Matlab using the NI nilibddc.dll. I have read most of the posts on here but still have a problem... Within Matlab I can open and read a file and get the data but I cant find anything that tells me what th
-
Where can I purchase a tri-wing screwdriver kit?
Hey everyone. I'm trying to purchase a y1 Tri-wing screwdriver locally (NYC Stores). Any suggestions? Thanks.
-
How to find the font and replace another font using javascript in illustrator?
Dear All, how to find the font and replace another font using javascript [batch process] in illustrator? i have 700 image file, it very deficult replace one by one. regards, .Suresh.S