Problem with adding cells in dynamic table
I have a very simple table set up for listing prices. Only two columns. One is the description and the other is the cost. I've used a previous posted Java script but Adobe will not let me put in prices.
This is the script:
ar jpt = xfa.form.form1.Page1.TableSub.resolveNodes("Item[*]");
var sum = 0.0;
for (i = 0;
i < jpt.length; i++)sum += jpt.item(i).resolveNode("Money").rawValue; this.rawValue = sum;
It just sits at $0 and never adds anything.
Ok, I figured it out. I had to go down another subform. I remembered Adobe viewed tables as a type of subform.
Similar Messages
-
Problem with coloring cells in dynamic fieldcatalog
Hi All,
I am trying to color cells based on the values in the cells. Here we are using dynamic fieldcatalog and internal table to build the ALV grid.I am getting problem in adding a field to the fieldcatlog which is of type lvc_t_scol. This Part of the code is used to build fieldcatlog dynamically.
DEFINE add_cat.
add 1 to lv_count1.
lwa_fldcat-col_pos = lv_count1.
lwa_fldcat-fieldname = &1 .
lwa_fldcat-reptext = &2.
lwa_fldcat-inttype = &3.
lwa_fldcat-intlen = &4.
append lwa_fldcat to lt_fldcat .
END-OF-DEFINITION.
*Add Columns to the fieldcatalog
add_cat c_proj 'Project' 'C' '30'.
add_cat c_cust 'Customer' 'C' '30'.
lwa_fldcat-col_pos = 12.
lwa_fldcat-fieldname = 'cellcolor' .
lwa_fldcat-reptext = 'cell color'.
<b> lwa_fldcat-inttype = 'lvc_t_scol'.</b>
append lwa_fldcat to lt_fldcat .
Here i want to assign internal table(lvc_t_scol) to the fieldcatalog as a field.But lwa_fldcat-inttype is of size 1 which will take one char. Is there any way that we can assign field of type internal table to the field catalog. Becoz of this i am unable to color cells in my ALV grid.
ThanksIt is not possible with the METHOD cl_alv_table_create=>create_dynamic_table to include another table inside that newly generated table.
I have tried to do it with the code and I got the dynamic table created after at the end of the program.
In the code,
<DYN_TABLE> has same effect as your <table> variable
<DYN_WA> has same effect as your <HEADER>
REPORT ZTEST_NP_DYNAMIC.
DATA: DY_TABLE TYPE REF TO DATA,
DY_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
<DYN_WA>,
<DYN_FIELD>.
FIELD-SYMBOLS: <FS> TYPE ANY.
* To generate the Dyanmic table with the COLOR
DATA: LS_SOURCE TYPE STRING.
DATA: LT_SOURCE LIKE STANDARD TABLE OF LS_SOURCE WITH HEADER LINE.
DATA: L_NAME LIKE SY-REPID.
DATA: L_MESSAGE(240) TYPE C,
L_LINE TYPE I,
L_WORD(72) TYPE C.
DATA: L_FORM(30) TYPE C VALUE 'TABLE_CREATE'.
LT_SOURCE = 'REPORT ZTEST_SUBROUTINE_POOL.'.
APPEND LT_SOURCE.
LT_SOURCE = 'FORM TABLE_CREATE USING I_FS TYPE ANY.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BEGIN OF LT_GENTAB OCCURS 0.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BUKRS TYPE BUKRS. '.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: BKTXT TYPE BKTXT. '.
APPEND LT_SOURCE.
* you can add your fields here.....
LT_SOURCE = 'DATA: COLOR TYPE lvc_t_scol. '. " <<
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: END OF LT_GENTAB.'.
APPEND LT_SOURCE.
LT_SOURCE = 'DATA: POINTER TYPE REF TO DATA.'.
APPEND LT_SOURCE.
LT_SOURCE = 'CREATE DATA POINTER LIKE STANDARD TABLE OF LT_GENTAB.'.
APPEND LT_SOURCE.
LT_SOURCE = 'I_FS = POINTER.'.
APPEND LT_SOURCE.
LT_SOURCE = 'ENDFORM. '.
APPEND LT_SOURCE.
L_NAME = 'ZTEST_SUBROUTINE_POOL'.
CATCH SYSTEM-EXCEPTIONS GENERATE_SUBPOOL_DIR_FULL = 9.
GENERATE SUBROUTINE POOL LT_SOURCE NAME L_NAME
MESSAGE L_MESSAGE LINE L_LINE WORD L_WORD. "#EC CI_GENERATE
ENDCATCH.
IF NOT L_MESSAGE IS INITIAL.
MESSAGE E000(0K) WITH L_MESSAGE L_LINE L_WORD.
ENDIF.
ASSIGN DY_TABLE TO <FS>.
PERFORM (L_FORM) IN PROGRAM (L_NAME) USING <FS>.
ASSIGN DY_TABLE->* TO <DYN_TABLE>.
* Create dynamic work area and assign to FS
CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
ASSIGN DY_LINE->* TO <DYN_WA>.
Write: 'bye'.
Regards,
Naimesh Patel -
Hi,
I have a problem with adding a latest JSF 1.2 RI from Sun (https://javaserverfaces.dev.java.net/files/documents/1866/44998/jsf-1_2_03.zip) to JDeveloper as a new library.
I created a new User library and added into it jsf-impl.jar and jsf-api.jar from JSF 1.2 RI.
Then I try to create two new JSP Tag libraries based from .tld files.
When a .tld file is placed in "TLD File:" field there is no information below about Library Version and Required JSP Version. If I check "Execute Tags in JSP Visual Editor" and click "Customize" button - list of tags in "Customize Tag Library" window is empty.
I have errors when I try to use JSF Tags from this new library in JSP page like :
"Can't create tag instance: f:view (class: null). Make sure, that the tag class or a library contained this class is available in this application"
(free translation to English)
Is this possible to add JSF RI v1.2 as another library in Jdeveloper 10.1.3.1 ?
thanks for help
koliHi,
This solution is not exactly for Jdeveloper 10.1.3.x I think.
- "Create a JSF system library." section, point 2. - there is not possible to add library in folder other than User I see, so I added it in User folder.
- "Register the JSF JSP tag libraries." section, point 5. - in JD 10.1.3 there is no dialog box, I checked checkbox "Show Tag Library in Palette". A new library was added to User folder but there is no new libraries in component Palette.
Even as I use "Edit tag libraries .." from Component Palette context menu and add manually new tag libraries to selected, there is no libraries in Component Palette after it.
I feel so problem is with different .tld files format, not with adding libraries method.
Sun RI tld file (from version 1.2_03) fragment:
<taglib xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd"
version="2.1">
<!-- ========== Tag Library Description Elements ========================= -->
<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
<tlib-version>1.2</tlib-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
tld included in JD:
<!DOCTYPE taglib
PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN"
"http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>
<!-- ========== Tag Library Description Elements ========================= -->
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>f</short-name>
<uri>http://java.sun.com/jsf/core</uri>
<description>
The core JavaServer Faces custom actions that are independent of
any particular RenderKit.
</description>
Did JDeveloper 10.1.3.x maintain with taglib version 1.2 ?
Regards
koli -
[SOLVED] Problem with adding a SSH connection to startup
Hi guys. I have a problem with adding ssh connection to startup. i want this command to run before kde login screen and keep running all time.
ssh -D 9292 remoteuser@remotehost
but it doesnt connect. Thanks for help!
Last edited by alperenel (2011-03-11 00:10:27)cactus wrote:
ssh -fN -D 9292 remoteuser@remotehost
you need -f, which sends ssh to the background, and -N which does not execute a remote command.
If you need it to run as a user other than root, then you probably need to utilize su as well.
it didnt work either. i am putting it in rc.local but doesnt work. -
Problem with adding new field to the mass change screen in FBL5N
Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz WłodarczykThe problem has been resolved: we didn't activate a code in SE80.
-
Problems with adding Library for a MySQL JDBC driver
Good day,
I am new with the JDeveloper package, so the following could be a user fault.
I found the following:
- I downloaded and installed Oracle JDeveloper 10.1.2.1.10 (latest version).
- I downloaded the latest JDBC drivers for MySQL. ( mysql-connector-java-3.1.10 )
Now, I did the following steps extracted from the link http://www.oracle.com/technology/products/jdev/tips/duff/mysql_and_oc4j3.html it should be quite easy to add the JDBC Drivers to the project.
I did the steps with the following results:
When I Edit the Project properties, follow Profiles -> Development -> Libraries
When I do ' New' , fill in at JS2E the value 'MySQL' and fill in the Class Path (in my case 'C:\javaInstalls\mysql-connector-java-3.1.10\mysql-connector-java-3.1.10-bin.jar').
In that case the [OK] is disabled. I should expect the [OK] button was enabled!
My question: Is this a bug? When not, what am I doing wrong!
Regards,
MikeI tried it on an other system and had no problems with adding the libraries. It still is a problem on that particular system using the Dutch version of XP. The problem is that the Ok button stays disabled !
Could it bw a version problem with Java? How ever no changes are made to the original configuration, so it should pick up as default the java version of JDeveloper self. -
Problem with Indesign CC 2014 and tables
Problem with Indesign CC 2014 and tables. The text rearranges itself when I delete or add something in a table; the footnotes to the text associated with the overlap even getting unreadable. Just click on the chain symbol in the window and everything is fine. Why?
try circumventing your cc app and see if that helps:
if you follow all 7 steps you can directly download a trial here: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
Problem with background formatting in pivot table
Hello,
I have a problem with background formatting in pivot table. I can't change background (light blue rectangular in upper left corner). Do you have any idea how to do it?
Here is the link to the picture of the pivot table:
http://img163.imageshack.us/img163/110/unledfyq.png
I would be grateful for any help.
Regards,Hey,
Check this link once, you will need java script to acheive this:
http://everythingoracle.com/obieehdom.htm
scroll down to this topic: Parsing using HTML DOM
Please award points if helpful.
Thanks,
-Amith. -
CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?
To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore. -
Hey guys , I have a problem with adding funds in my PSN account with my debit card . I have used the same card in the past with no problems at all but now for some reason it keeps on saying that the card number is invalid every single time ! Please help me , is there any solution ? Does it maybe has to do with Capital Control ( I live in Greece )
Thanks I use this
2.) You can make one of your buttons the default
button of the frame:
this.getRootPane().setDefaultButton(confirm);
well, did you implement the first suggestion of quitte?
here is an idea that might work!
JTextField username;
JPasswordField password;
JButton confirmButton;
username.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae){
password.requestFocus();
ActionListener l = new ActionListener(){
public void actionPerformed(ActionEvent ae){
//optional check for username and password length>0
//process logon.
password.addActionListener(l);
confirmButton.addActionListener(l); -
Table cells - Problem with merged cells
Hi
I was experiencing very weird behavior with my tables until I realized that it was caused by merged cells
My script gives a dialog which allows the user to choose from which column to start and from which row.
As the script iterates through the cells in the selection I was getting weird results
Through using .select() function I was able to see that depending on the column, some times row 5 could be which seems to be row 3!
The reason was because of merged cells in that row
I.e., when some cells are merged together, only the first column of those merged cells is recognized - the others are not
so it comes out that when merging cells from column 3 to 5, column 3 has a cell in that row, columns 4 and 5 do not, and column 6 does!
Is there a way to get around this behavior?
Thanks
DaveyI don't understand the point of your post.
If you're trying to report a problem or "bug" with Pages, that is not the purpose of this user-to-user forum. You should leave feedback for the Pages team on this page.
I've not had a problem opening Word files with tables in Pages. If you're saying Word can't handle tables with merged cells, then don't use merged cells in files you are going to export as Word. Word & Pages must handle merged table cells differently, as I know both can do that. As far as RTF, Pages can open & export as RTF. Again, if you are going to export as RTF, don't use tables. Neither of these is a fault of Pages, just limitations of the formats/programs. -
Problems with vertical cell borders and the default table style
When laying out tables in Word, I like to use thin horizontal lines (cell borders) and thick-ish white vertical lines. The vertical white cell borders create a subtle negative space that is less cluttered than the typical boxed-in-all-sides style.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
Message was edited by: Steve in SeattleI must apologizes.
It seems that I didn't understand well the problem.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
NO
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
I checked and here, aftere defining a new default format with vertical lines set to none, this format is used when I cvreate a new table.
But the same with horizontal lines doesn't apply.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (from FRANCE mardi 28 avril 2009 22:31:45) -
Problems with adding a new row in my table
Im an ADF beginner but I thought it would be simple to to do some basic CRUD stuff in ADF. Im now even struggling when i try to add a new row to my table.
Seems that the primary key id is not set correctly...
could someone help?Hi,
Have a look to this page CREATE SEQUENCE
Regards,
Sébastien
Creating a Sequence: Example
The following statement creates the sequence customers_seq in the sample schema oe. This sequence could be used to provide customer ID numbers when rows are added to the customers table.
CREATE SEQUENCE customers_seq START WITH 1000 INCREMENT BY 1 NOCACHE NOCYCLE; -
Problem with clip area occurred when table content is transited
Platform: JavaFX 1.2.1.
Hi all
<b>Preface</b>: I created my own table because the cell content should be not standart: buttons, progress bars, etc...and text as well.
There is no standart decision for this and simple there is no table control in JavaFx as well :) (swing JTable in a SwingComponent wrap
doesn't fix the problem - only combo box, check box, text box can be placed into a cell). So, I did the following: I created a sequence
of instances of the Group class. Each instance represents one cell of the table. I put a rectangle (Rectangle class) as a cell visualization
and other controls(buttons, progress bars, text, etc. as a cell content) to each Group instance (cell). All cells in the sequence are located
in rows and columns as in a usual table. and I put this sequence of cells to one common Group. The whole area of all rows and columns is large
so I use the clip variable of the Group class (common Group) and two scrollbars (vertical and horizontal) to transit the rows and
columns. It's simple thing as in a usual table.
<b>Problem description</b>: when I transit a thumb of a scrollbar (whatever horizontal or vertical) part of each border cells appear out of common
Group clip area, i.e. that part of each border cell (as on the left, rigth side of the clip area for horizontal scrollbar so as on the top, botton
side of the clip area for vertical scrollbar) that should be disapeared is appeared over other GUI controls located near this table. I tried to
use ClipView - the problem is reproduced as well. Screenshot here:
Initial state:
http://foto.nnov.ru/psh500/0/86/51/e1/4e/a0/ae/0bd8ef7ebf233614.png
Screenshots with bugs:
http://foto.nnov.ru/psh500/0/f8/1c/28/77/b5/79/f53bbc4fd8ba8158.png
http://foto.nnov.ru/psh500/0/3a/95/c3/6c/0e/4f/9aff2e16a544bb37.png
Help please.
Thanks in advance!Code is simple. There are two classes: TableColumn.fx and Table.fx. And as an example of use: Main.fx
* TableColumn.fx
package mytabletest;
import javafx.scene.Group;
public class TableColumn {
public var name: String;
public var width: Number;
public var rows: Group[];
* Table.fx
package mytabletest;
import javafx.scene.CustomNode;
import javafx.scene.Group;
import javafx.scene.Node;
import javafx.scene.control.ScrollBar;
import javafx.scene.layout.LayoutInfo;
import javafx.scene.shape.Rectangle;
import javafx.scene.text.Text;
import javafx.scene.text.TextOrigin;
import javafx.scene.transform.Translate;
import javafx.scene.paint.Color;
public class Table extends CustomNode {
// Table width
public var width:Number;
// Table height
public var height:Number;
// Table row hight
public var rowHeight:Number = 25;
// Space between two cells
public var rowMargin:Number = 2;
var tableContent : Group;
// Columns
var columns: TableColumn [];
var scrollBarWidth: Number = 8;
// Cliping area: visible active area of the table
var clipWidth = bind width - scrollBarWidth;
var clipHeight = bind height - scrollBarWidth;
// Vertical scrollbar
var vScrollBar: ScrollBar = ScrollBar {
height: bind clipHeight
clickToPosition: true
min: 0
max: 5
vertical: true
// Horizontal scrollbar
var hScrollBar: ScrollBar = ScrollBar {
width: bind clipWidth
clickToPosition: true
min: 0
max: 3
vertical: false
// Scroll bars triggers to transit table content in X and Y coordinates
var vScrollBarTrigger = bind vScrollBar.value on replace {
(tableContent.content[0] as Group).translateY =
- vScrollBar.value * (rowHeight + rowMargin);
var hScrollBarTrigger = bind hScrollBar.value on replace {
(tableContent.content[0] as Group).translateX =
- hScrollBar.value * clipWidth / getNumOfColumns();
public override function create():Node {
return Group {
content: [
// Scrollbars
Group {
translateX: bind clipWidth
content: [vScrollBar]
Group {
translateY: bind clipHeight
content: [hScrollBar]
tableContent = Group {
clip:
Rectangle {
width: clipWidth
height: clipHeight
content: [Group{}]
* Calculates locations for the table columns
function calcLocations(columns:TableColumn[], e:Integer) {
var position : Number = 0;
if (getNumOfColumns() > 0) {
for (i in [0..e - 1]) {
position += columns.width;
return position;
* Adds row to the table
* @param obj sequence of objects to be added to a new row
public function addRow(obj: Group[]): Boolean {
var cell: Group;
var row = getNumOfRows() + 1;
var isEven = row mod 2 == 0;
for (column in columns){
cell = Group {
transforms: Translate.translate(
calcLocations(columns, indexof column) + indexof column * rowMargin,
((rowHeight + rowMargin) * row))
clip:
Rectangle {
width: column.width
height: rowHeight
content: bind [
Rectangle {
width: column.width
height: rowHeight
fill: Color.rgb(147, 0, 255)
Group {
content: [obj[indexof column]]
layoutInfo: LayoutInfo {
width : column.width
height: rowHeight
insert cell into column.rows;
insert cell into (tableContent.content[0] as Group).content;
return true;
* Sets columns to the table.
public function addColumn(name: String, width: Number): Void {
// Check if the name is an empty string then column name will be the
// following: "Column{i}" where i is a number of columns (zero based)
var columnName : String = if(name == "") "Column{getNumOfColumns()}" else name;
var column: TableColumn = TableColumn {
name: columnName
width: width
//Add column head
var cell: Group;
cell = Group {
var rec: Rectangle;
transforms: Translate.translate(
calcLocations(columns, getNumOfColumns()) + getNumOfColumns() * rowMargin, 0)
clip:
Rectangle {
width: width
height: rowHeight
content: bind [
rec = Rectangle {
width: width
height: rowHeight
Group {
var node : Node = Text {
textOrigin: TextOrigin.TOP
content: columnName
transforms: bind
Translate.translate(width / 2 - node.boundsInLocal.width / 2,
rowHeight / 2 - node.boundsInLocal.height / 2 + 2)
content: [node]
insert cell into column.rows;
insert cell into (tableContent.content[0] as Group).content;
insert column into columns;
* Returns number of rows
public function getNumOfRows(): Integer {
if(sizeof columns > 0) {
return sizeof columns[0].rows - 1; // The first cell is a column title
else {
return 0;
* Returns number of columns
public function getNumOfColumns(): Integer {
return sizeof columns;
* Main.fx
package mytabletest;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.Group;
* @author Naight
var table : Table = Table {
translateX: 100
translateY: 100
width: 200
height: 200
Stage {
title: "Application title"
width: 400
height: 400
scene: Scene {
content: [table]
table.addColumn("Column1", 100);
table.addColumn("Column2", 100);
table.addColumn("Column3", 100);
for(i in [0..9])
table.addRow([Group{}, Group{}, Group{}]); -
Problems with displaying Asian languages dynamically in a text box
I have a text box that I am adding to the stage dynamically. The text box is a movieclip in the library. However, when it is added to the stage the message is not displayed. I have no problems with English or Spanish but for Chinese, Korean, and Japenese the message is not displayed. Here is the code in Chinese (when a certain condition is met:
function whiteFlashCompleteF():void{
ssMessageF("截图已添加至您的图片库");
function ssMessageF(s:String):void{
ssMessage.alpha = 0;
addChild(ssMessage);
ssMessage.x=stage.stageWidth/2;
ssMessage.y=stage.stageHeight/2;
ssMessage.tf.text = s;
TweenLite.to(ssMessage,1,{alpha:1});
TweenLite.to(ssMessage,1,{alpha:0, onComplete:ssMessageCompleteF, delay:3, overwrite:false});
Do anyone have any ideas on how I can get the text to display?any text that is rendered in a dynamic textbox during runtime,
has to consist of characters of a font you have properly embeded,
(which might not be the case for this chinese message)
Maybe you are looking for
-
How to add tab and field in purchase order
hi friends, I have to make changes in the purchase order. i have to add tab and a field in that. i know that badi ME_GUI_PO_CUST have to used this. can anyone send me the code or documenation fot add a tab and field using this badi or suggest me how
-
Mac Book pro Retina (15 inch early 2013) is constantly freezing.
Problem description: My Mac is constantly freezing, for (how it looks like) no good reason. Sometimes it occurs when I load League of Legends, sometimes it does not, also it just froze when I opened Iphoto, so I am not sure why this happens. So when
-
Hi i have a problem with delete button issue in SRM change PO. actually when i am changing the PO in SRM the next DELTE button is not activated. so how could i activate DELETE button in change PO. kindly suggest me where i need to change settings to
-
User equivalence check failed (RAC setup)
Hello All, I am trying to set up user equivalence between 2 nodes, following instructions from "Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bi
-
My ios 6 album is still hidden on my facebook account.
I already access the private settings to allow my photos to my facebook account, But still i cant see my ios6 photo album just like before. What will I do? I tried to restart the location and privacy settings but still the ios6 album didnt work. What