Problem with Adobe Premiere pro cs3 3.0

Hello there! I have this odd new problem in adobe premiere cs3 that i havent encountered before and ive tried to solve it but cant =/
If i import a picture into the project it lies there like it should ready to be dragged onto the timeline, the problem is the preview of the picture and the screen when i drag it into the timeline is black.. i cannot get the picture to appear as it just keeps being black, ive tried diff sizes of pictures, the only pictures that ive found that works so far are the windows example ones..
Answers Asap are appriciated, its a wedding movie and has to be done by tommorow night..

Can you download and install G-SPOT and run those problem files through it. Tell us what G-Spot tells you. That article, that John T. linked to, should have some details on G-Spot, IIRC.
It is likely that the CODEC is not one that is properly installed, or one that PrPro can use to edit. The good things about VLC Player is that it's free, good and carries most of its own CODEC's. The bad thing is that playing an AV file is not the same as editing that same file, and so a test in VLC will only tell you so much.
This ARTICLE will give you some background on CODEC's.
Good luck,
Hunt

Similar Messages

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Hi. I need urgent help with Adobe Premiere Pro CS3

    Hello there. I am new to using Adobe Premiere CS3. As I have given up on Vegas. But I am stuck at the first hurdle! Please help.
    When I load up Premiere, I select new project. Once I click that it asks me to load a preset. And I have no idea what to choose! And I have a project that needs to be edited, I am really anxious about it all.
    My footage that I want to edit was shot on a 600D DSLR. And I dont know what preset to choose for the best quality when I render. (I cannot recall what shuitter speed I shot at I think it was varied).
    Belowe is a picture that I am stuck on.
    So IF YOU COULD PLEASE tell me what to select for my 600D footage I would be so grateful.!!!
    (I also plan to put the edit onto a DVD - If that matters). (And Youtube).

    Or, if you don't have a 64bit computer and Win7 64bit to run CS6, take a look at Premiere Elements 10
    I **think** it works with your camera, but check the PreElements forum before you buy
    http://forums.adobe.com/community/premiere_elements

  • Having Problems with Adobe Premiere Pro CC

    Alright, So I downloaded and installed the Creative Cloud. I'm trying to download the Adobe Premiere Trail because I'm thinking of buying the product. However, After waiting so *******(Excuse the language, you have no idea how frustrating it is) long to download, I'm not sure if it's downloaded or not. It tells me it is installed, but the program won't open. I've tried uninstalling the program to try reinstalling it again, but it just gives me this "1% to 99%", yet it still keeps telling me that it is installed into my computer. I don't know whether or not it installed because I had to wait long hours for it download and it kept getting errors each and everytime. Now it says on my creative cloud that it is "up to date". Why won't it open? Can anybody please tell me? Does it have to do with system requirements? I have a 32 bit sony vaio laptop. My dad has a 62 bit dell laptop and it works very fine. Please help, I don't know what to do.

    kevinm14238495
    Premier Pro will not work on 32 bit computer. You need to have64 bit computer to Run the product
    Please refer
    System requirements | Adobe Premiere Pro

  • Can u do this with adobe premiere pro cs3?

    Hi,
    my name is Jeffken ,I'm a photoshopper for almost 3 years (I think).
    I do alot of designwork for lot's of diffrent customers from family to friends to company's.Webdesign,photo's,...
    But yesterday a customer asked me if it was possible to make an animated projection of a city in snow. I know how to make animated gif's with photoshop but is it possible to shoot some nice footage with my videocamera and to load it in Premier Pro cs3 and to make the footage snowy,cold?
    Thx in advance tips and stuff are welcome!!
    Grtz
    Jeffken

    Nonesense, you can do it with Premiere.
    (1) In Photoshop, create a large resolution image with snow flakes on a blue screen background. Use that as a foreground.
    (2) In Premiere, place your foreground on top of the background and use blue screen options to retain only the snow flakes.
    (3) Increase the size of the foreground image a few hundred percent and use the movement option to slide the foreground down (as you would do in a crawl title effect).
    (4) Use various layers and various crawl speeds. When a crawl in done, fade into the next crawl to the snow flake effect goes on as long as you want.
    (5) You can use brighness variations on the snowflakes to create an organic effect.
    (6) To enhance the effect, use slightly different crawl angles on each layer.
    It works. I used this technique to create a sandstorm effect and it was so convincing, nobody knew it wasn't a real sandstorm.

  • Importing AVIs into Adobe Premiere Pro CS3 !!!

    Heres what Im trying to do: We have been working on a PC Leitch Velocity Q NLE system for the past couple years and just got 2 new Matrox Axio LE NLEs with Adobe Premiere Pro CS3. We are trying to get all our old projects from the Velocity system onto our Matrox systems and not sacrifice any of the video quality. I've been thinking that the best way to do this is by compressing old projects to AVI format from the Velocity system and move them over to the Matrox using an external hard drive.
    I was actually able to bring in an AVI from the Velocity system onto the Matrox yesterday using the same Velocity settings below, except that I changed the aspect to 720 x 480 and the audio sample rate to 48,000. When playing the video on the timeline in Premiere the video looked great on my computer monitor but on my external NTSC monitor all motion in the video looked a little jerky as if frames are missing. I tried importing the test clip into both Matrox uncompressed 8-bit and uncompressed 10-bit projects and had the same resulting jerky looking video. Even after rendering the clip the video looked the same. Then I tried exporting the clip to mpeg using the Matrox media encoder but saw no change in the jerky movement. Here are my project and export setting for both systems.
    The AVI was made on a PC Leitch Velocity Q NLE system. My project settings on the Velocity system are;
    29.97 drop frame
    720 x 486 24 Bit
    Interlaced field order B
    Sub pixel off Cropping off
    Audio:
    16 sample
    44 / samples / second
    2 channel
    Export settings are; (These are the settings I was trying the first time that didnt work. All I changed the second time was the aspect ratio to 720 x 480 and the audio sampling rate to 48.)
    AVI
    Frame rate 29.97
    720 x 486
    No Compression
    Color 24 Bits
    Field handling interlaced field order B
    Audio:
    16 sample
    Sampling rate 44
    2 channels stereo
    Do you recommend compressing the video coming out of Velocity?
    There are a couple other options other than No Compression in the export dialogue such as: Microsoft H.263 video codec, Microsoft H.261 video codec. I definitely want to maintain the highest quality possible.
    Matrox Axio LE project settings
    Editing mode: Matrox NTSC
    Timebase: 29.97 fps
    Video
    Frame Size: 720 x 486
    Pixel Aspect Ratio: D1 / DV NTSC (0.9)
    Fields: Lower field first
    Display: Format 30fps Drop Frame Timecode
    Audio: Sample 48,000 Hz
    Display: Audio sample
    Video Rendering: Maximum bit depth is Unchecked
    Previews: File format Matrox uncompressed 8-bit NTSC (tried Matrox uncompressed 10-bit too.)
    I think the jerky video might be due to dropping frames but Im not sure.
    Any help is greatly appreciated!

    While it seems that the field order is consistent, I have seen issues where converting from clips that change field order creates this sort of problem. This is particularly obvious when converting from MJPEG codecs like Meridien or Miro/Pinnacle to DV.
    What happens if you just import the files into Premiere and let it do the rendering to the project settings?

  • Adobe Premiere Pro CS3 Confusion

    Hi guys,
    I have very basic problem in Adobe Premiere Pro CS3. When I import video it's size is scaled down and quality is rapidly droped down. When I export it quality is very bad and my video have a black frame. How would I keep the quality and get rid of black frame?
    I really need this project to be done soon, thank you very much!
    Maksimilijan.
    Project details:
    DV - PAL
    Widescreen 48kHz
    30Fps

    The great little utility, G-SPOT will tell you what FRAPS is Exporting. What you are seeing is a disparity between that FRAPS footage, and your Project Preset. They must match 100%. You will most likely need to set up a Desktop Project and adjust the Frame Size to match your footage.
    Also, going back about a year, there were several long threads on FRAPS footage into PrPro. I would Search this forum for "FRAPS," and read. There were some good tips in those. One was quite long, and used to have some neat flight-sim screen-caps, but last time that I looked, the images were no longer up on the OP's server, so they will be missing now - the discussions were all still there.
    Good luck,
    Hunt

  • Adobe Premiere Pro CS3 3.2.0 update

    Thought I'd share a bit of information on the 3.2.0 update that will be coming out via AUM this morning. The update will come out first via AUM, then will be available on the updates page shortly after at http://www.adobe.com/downloads/updates/?ogn=EN_US-gntray_dl_updates.
    The readme will also be hosted at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html.
    Dave Helmly has posted about the update on his blog, as well: http://blogs.adobe.com/davtechtable/2008/04/xdcam_and_premiere_32.html#more
    New in this release:
    - This update adds compatibility with the Sony XDCAM range of cameras. This includes disc-based XDCAM and XDCAM HD cameras., and the newer SxS-based XDCAM EX cameras. Content from XDCAM cameras can be imported and edited natively without transcoding or conversion. This makes possible similar workflows to Panasonic P2, including the ability to edit content directly from XDCAM EX cameras.
    - Note: Adobe Premiere Pro CS3 3.2.0 does not support IMX editing or XDCAM HD50 editing at this time. Export to XDCAM is also not possible.
    - Adobe Premiere Pro now has presets for HDV 24p. Note: Adobe Premiere Pro does NOT support print to tape in 24p mode.
    - Improved handling of MPEG streams (e.g.: HDV video), along with error detection. MPEG stream errors can occur during recording due to tape dropouts, record start/stop glitches, timecode breaks, etc. Bad frames caused by these MPEG stream errors are identified during import/indexing or playback. These frames will play back as full red frames to alert the user that there is a problem in the encoded video at that location. Adobe Premiere Pro will also log error messages to the Events panel, indicating where the error(s) were encountered in the stream. Users can open the Events panel, determine the location of the MPEG stream error, navigate to that location in the clip and take corrective action, such as trimming out the video glitch or covering up the red frames with duplicated good frames copied from before or after the glitch. Note: MPEG files will need to be re-indexed to take advantage of the improvements in Adobe
    Premiere Pro CS3 3.2.0. For more information, please see Working with MPEG Files.
    Notable fixes:
    - Titles/Footage no longer show up as offline when reloading saved projects.
    - Rendered preview files no longer missing when reloading saved projects.
    - Certain filters and/or transitions are now applied correctly when reloading saved projects, until the timeline is forcibly refreshed.
    - When exporting via the Adobe Media Encoder, there is no longer a long delay before the progress dialog shows and rendering resums (Mac OS 10.5.x only).
    - 24p HDV clips shot on a Canon XH A1 no longer come in incorrectly as 30 fps clips.
    - Creating an offline clip in the project window then attempting to link it to media on disk no longer results in the application crashing.
    - QT PAL movies rendered out of Adobe After Effects® software are no longer incorrectly identified as requiring rendering in a Adobe Premiere Pro PAL project.
    - DV Clips of certain specific durations are no longer incorrectly identified on the timeline as requiring rendering.
    - For P2 DVCPro clips, the right-most pixel column no longer contains video garbage.
    - Fixed a memory fragmentation problem that would occur with projects with many custom bin columns.
    - Fixed a bug where exporting to a QuickTime movie (with QT 7.4) would crash the application.
    - Selecting "display only exact name matches" when relinking clip no longer crashes on Leopard.
    - Fixed an issue where 30p and 30f HDV clips would incorrectly be identified as requiring rendering in a 29.97 progressive project.

    Harm,
    I don't use HDV, so I'm not sure if this is the case or not, but in the top post, there is mention of having to re-index the MPEG files "to take advantage of the improvements in Adobe Premiere Pro CS3 3.2.0." While it seems this should be an automatic process, maybe wiping out the previously-created index files (I seem to remember them being in the Media Cache folder when importing MPG files from DVD rips and such) would let the project open. Or, maybe the old trick of importing an existing project into a new one? Just a couple thoughts...
    To the other poster: surely, I don't jest. At least, not when it comes to anything in the video production industry and my operation in it. Long ago, I gave up expecting perfection from any particular piece of hardware or software, and just focused on being creative. That's why I got into this. I refuse to let any piece of equipment dictate what I can or can't do--I just find another way around. Funny how we managed to make it as a species and a civilization as long as we have, and now that computers are here to make our lives easier (*snort*), we're quick to raise our ire about everything that's wrong with them. That's why I will always marvel at things built long ago prior to the advent of all the technology we take for granted today.
    Anyway, we're all entitled to our opinions, and I've taken this thread completely off-topic. My apologies, so...

  • HDTV import in Adobe Premiere Pro CS3

    Hi all, I am a 3D animator and I am working right now in an animation where the client wants a High Definition resolution HDTV 1920x1080. When I finish my work and make the render, I went to edit in my Adobe Premiere pro CS3 and find with surprise that that preset does not exit!!! ...so my question is: How can I do for to import my targas sequence files 1920x1080 into Adobe Premiere???...there are some free plugin that fix this problem???
    Thanks in advance for any answer.
    Best Regards
    Boris.

    You would swear this kind of things is not
    in the manual. :)
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 300 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Adobe Premiere Pro CS3 is exporting in the wrong size

    I want to export my clip I've made in Adobe Premiere Pro CS3 while choosing the option "HDV 720p24" (I've also tried 25, 30 and a few others).
    It says in Video Settings before I even start to work on my clip:
    "Frame Size: 1280h 720v"
    Which is EXACTLY what I want.
    However, whenever I choose to export my clip, it ends up being 720 x 480. That's not even 16:9/Widescreen.
    I've tried entering the settings when choosing the export options, but the preset 720 x 480 can't be change.
    Why is this? Is it impossible to expert a clip to be in 1280 x 720 or any other custom pixelsize I want?
    Best regards, Izzy.

    Hi everyone,
    I apologize for digging up an old thread, but I figured that I'm experiencing this exact problem and have no idea how to work around it I might as well post in an already started topic.
    I'm trying to export 1280 x 720 video to that same resolution, but Premiere Pro will not let me choose anything other than 720 x 480 for the size when I try to export through File > Export > Media. I have attempted to use multiple media formats but have had no results for what I need. If it really help, I've posted a couple of screenshots showing my current project settings, but this is just one of a few different formatting attempts which have all turned out the same:
    http://www.derektoigo.com/assets/screenshots/premiereexport1.png
    http://www.derektoigo.com/assets/screenshots/premiereexport2.png
    Hopefully those will be enough to give you a detailed view of exactly what the problem is.
    Any help with how to work around this would be greatly appreciated. Thanks to all.

  • PSD lassen sich in Adobe Premiere Pro CS3 nicht mehr importieren

    Wir haben seit Montag das Problem, dass sich in Adobe Premiere Pro CS3 keine PSD mehr importieren lassen. Als Fehlermeldung erscheint, dass es ein nicht unterstütztes Format sei. Am Betriebssystem liegt es wohl nicht, da das Problem auf Rechner sowohl mit WinXP als auch mit Win7 besteht. Bis Freitag lief alles wunderbar, nur am Mo. ging es nicht mehr. Weiß jemand, woran das liegen könnte?

    [Entschuldigen Sie alle.  Ich habe dieses Post geschrieben bevor ich bemerkte dass es gibt hier ein Deutsches Forum.  Ich habe es jetzt in einem Englischen Forum auch geschrieben.]
    Not a reply, but a "me too".  Like Bjoern I use PPro CS3.  Mine is on WinXP with all updates.  I import PSD files as keying masks.  I've never had a problem until this evening (27 Aug 2014).  I tried to import a mask I've used many times before.  And it has always worked before.  Tonight PPro refused to recognize .psd as a supported file type, so it didn't show in the import folder file list.  When I told PPro to show "all files *.*", it showed the file.  When I selected it, PPro even showed the "import file" window, then displayed the "File Import Failure" window with Error Message:  File format not supported.  See the picture below.
    This is a file I've imported into many previous projects with no problem whatever.  In fact, I started with a project file from last year which showed the mask file in the project assets but offline!  Even though the file had not been moved.
    If PPro CS3 is as obsolete as Adobe claims it is, then who's been messing with it?  And how can we get it "unmessed"?

  • Trouble Importing MOV files in adobe premiere pro cs3

    Hi,
    I just bought a Canon 60D camera and I am using adobe premiere pro cs3 for the first time.
    I tried to import MOV file footages made by my Canon 60D, but it says that my files are not supported.
    I don't know what to do!
    Can someone help me?
    Thank you.

    Hi All,
    Let me tell you how I solved the XDV9 codec trouble on my Windows 7 system. The solution is rather stunning because I am using completely free software. First download the Shark007 codec pack for your system here: http://shark007.net/forum/Thread-Setup-and-usage . Please be aware that the codec pack installer comes with a toolbar install option so make sure you de-select this option during the installation process. After installation check the MOV tab on the "Settings Application" program. Make sure "use LAV's splitter" is selected for MOV Playback.
    Now comes the crazy part... To convert the XDV9 MOV video clips just download Windows Essentials Movie Maker for Windows 7. At this moment more info about this program can be found here: http://windows.microsoft.com/en-US/windows-live/movie-maker-get-started . Again, make sure to set the right settings during installation otherwise you will be installing a lot of possible unwanted crap like Windows Live Mail, Windows Skydrive etc.
    Movie Maker has quite good settings for converting (High Definition or custom settings are supported). Select your clip, or select multiple clips to create an unedited full length clip of all your clips, and then select "create movie". I used the "use recomended settings for this project" settings as it matches the source file resolution and frame rates etc. It is quite some work to convert clips like this but its the only free solution I could find so far.
    Good luck!
    Rodger

  • How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

    Hi there,
    I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
    How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
    So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
    Any established hardware/convertor to recommend ?
    Thanks

    Ryan,
    For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
    One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
    Good luck,
    Hunt

  • Export multichannel mp4/h.264 with Adobe Premiere Pro CC

    Dear community,
    we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
    However, we are not succentful in exporting a multichannel mp4/H.264 clip.
    We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
    If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
    In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
    If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
    What are we doing wrong?
    Thanks for every suggestion.
    Thanks in advance
    André

    Thanks for your thoughts, Richard.
    Your are right, we currentky use the Adobe Premiere Creative Cloud version.
    We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
    After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
    However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
    This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
    Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
    How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
    André

  • Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

    Hello-
    I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
    A quick comparison of systems:
    Mine:
    HP dc7700s desktop
    Windows XP OS
    Adobe Master Collection CS3
    Hers:
    IBM compatible laptop
    Microsoft Vista
    Adobe Premiere Pro CS3
    Adobe Photoshop CS3
    I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
    I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
    Thank you!

    >project will be opened in Desktop mode
    I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
    What is the codec and properties of the files in that project?
    Are you sure they are 100% standard?

Maybe you are looking for