Problem with applications and accessing database
Hi
I have a serious problem with my applications.I was trying to change "users"'s folder icon so I changed the setting in information.I don'y know what I did but It made these problems:
many of applications does not open for example
itunes-->The folder "iTunes" is on a locked disk or you do not have permission...
picasa alerts me with a database error
yahoo messenger just pops up once and doesn't open.
firefox the same problem
net monitor alerts with a database problem.
evernote same problem
all of my address book is erased.
I think somehow I removed the db files or I changed the permission and the programs can not access to their db files.
don't know the last thing I have done was trying to change the icon and after that I found out about the problem.Maybe sth else caused the problem . anyway I copied all of my files to a new user and I removed the user with problems & everything is ok here.thank u all.
Similar Messages
-
Uk date format issue with ASP and Access Database
I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Stevestevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html -
Problems with applications and sticking on loading screen upon boot up
Hello,
So a problem arose with my GS4 beginning yesterday afternoon. I was using my phone to check game times for the ncaa basketball tournament on google chrome when the application suddenly crashed. I tried to re-open the browser and after doing so the phone almost immediately closed it again. I thought perhaps it was just a problem with the program so tried out some other applications on my phone. They all exhibited the same behavior (opened, immediately closed). In an attempt to resolve this, I restarted the phone and then ran into another problem. Upon restart, my phone loaded up until the Verizon loading screen and would not advance further. After roughly 10 minutes, I removed the battery from the phone to kill the power, waited ~1 minute, re installed the battery, and attempted to start the device back up. Again it could make go further in the boot up sequence than the Verizon screen. I was unable to correct this problem unless I removed the battery, re installed it, plugged the phone into a charger, and then turned the phone on. This issue is persisting today - applications are still crashing and I am unable to use my phone for anything other than a large watch - and it's rather frustrating. I thought perhaps it was battery issue, so plugged the phone in and tried to load an application with no success.
So... do I have a battery issue? Software? Hardware?
Best regards.scm1478,
We want you to have a fully functional device! Your issue sounds as if it may be software related. Please place your phone in "Safe Mode" and see if the issue persists. http://vz.to/1hSCHPI Keep us posted.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Problems with classpath and accessing a specific file
I'm currently running an application using NetBeans (I know this is the Sun Forum but maybe someone can help). For those who aren't familiar with this IDE, whenever a project is created, a ProjectName folder is also created. Inside that folder are 5 new folders (*build*, dist, nbproject, src and test) as well as 2 new files (*build.xml*, manifest.mf). The dist folder contains the *.jar* file.
Seeing that this is an audio application, I am constantly working with audio files. In the ProjectName folder, I've created a sixth folder (*audiofiles*) were I load and save such audio files. To access a specific audio file, I do the following:
File audioExample = File("audiofiles" + File.separator + "audio.wav");When I run the project from the IDE there doesn't seem to be a problem. However, when I try to run the project by simply double-clicking the *.jar* file in the dist folder, the audio files can't be accessed. In order to be able to access them, I need to change the path:
File audioExample = File("C:\...\ProjectName\audiofiles\audio.wav");This seems to solve the problem temporarily, but if I decide to change to project folder location, I also need to change the path.
QUESTION:
What is the best way to access files so that they are not dependent on where the project folder is located? Do I need to modify the classpath or simply write the path in File(...) in a specific way? If I need to modify the classpath, how can I do so in Netbeans?
Thanks in advance.DrClap,
Thanks for the reply. To answer your questions:
Naturally that depends on where you DO want to load from. Are the files in the classpath? Are they in the current working directory?
Some other directory where you can ask the user to point to? On a different computer?The audio files are located in a created folder in the IDE project folder. I know you mentioned that I should stop thinking about this as an IDE project but I don't know any other way to think about it. I'm kinda new to Java, and the only way I've learned how everything is structured is through the IDE project structure. I'm realizing that this is probably not the best way to go about as it doesn't allow me to have a good understanding of the Java file structure. What changes do I need to make in the way I view my IDE project to make it more into a deployed version?
I'm also having a hard time understanding the classpath concept. I've been under the impression that the classpath was simply the location of the packages and classes of a specific application. How could I check if the audio files are in the classpath?
Thanks in advance. -
Problem with application and storage and memory.
I NEED HELP!! I am trying to add more application s to my Blackberry Curve 8330. My problem is I don't have enough storage to even add a couple of application s and their updates to my phone. I have an 8GB media card with like 7.3GB of free space. Also, I only have 3.7MB of free space on my device. One of my questions is, How do you add things to your memory card instead of your device memory? Second thing is, if anyone decides to respond to this discussion, please use simple steps. Thanks soooo much.
~RobinHello!
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory -- This is what it says...your SD card, for you to store files, media, pictures, etc. It cannot be used as the target for installing applications (only App Memory can be used for that). It can be as large as your BB OS can support...see this KB:
http://www.blackberry.com/btsc/KB05461
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
http://www.blackberry.com/btsc/KB15345
http://www.blackberry.com/btsc/KB14320
http://www.blackberry.com/btsc/KB14213
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Best!
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Problem with httpd and oracle database
hi
i have oracle linux with oracle database 11gR2
i install php with oci as the following link :
http://oss.oracle.com/projects/php/dist/documentation/installation.html
but when i try phpinfo() i found just only
*" /etc/php.d/oci8.ini"* in the result
and when i test connection i have this error
*" Fatal error: Call to undefined function oci_connect() "*
so what is the best way to install oci on oracle linux ?What version of the OS are you using? Any clues in the syslog and httpd log? Are you using SELinux, which is often an overlooked issue?
Can you provide more details?
so what is the best way to install oci on oracle linux ?According to the instructions, if support is needed: http://www.oracle.com/technetwork/topics/php/zend-server-096314.html -
ASA5505 Upgrade to 9.1.5 from 8.4.1 - problem with nat and accessing external host
When running on 8.4 i had a working config with the following scenario.
I have 2 interfaces configured as the outside interface.
One is connected to my internet connection
The other one is connected to a host that has a public ip.
The public host can access internet and also a PAT port on an internal host.
But after the upgrade the internal hosts can't access the external host but everything else on internet
packet-tracer input inside tcp 10.x.x.11 1024 x.x.x.89 22
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in x.x.x.0 255.255.240.0 outside
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
If i add 1 to the destination ip:
packet-tracer input inside tcp 10.x.x.11 1024 x.x.x.90 22
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in x.x.x.0 255.255.240.0 outside
Phase: 2
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group inside_access_in in interface inside
access-list inside_access_in extended permit ip any4 any4
Additional Information:
Phase: 3
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (inside,outside) source dynamic any interface
Additional Information:
Dynamic translate 10.x.x.11/1024 to x.x.x.80/1024
Phase: 4
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Phase: 5
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 6
Type: NAT
Subtype: rpf-check
Result: ALLOW
Config:
nat (inside,outside) source dynamic any interface
Additional Information:
Phase: 7
Type: USER-STATISTICS
Subtype: user-statistics
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 10
Type: USER-STATISTICS
Subtype: user-statistics
Result: ALLOW
Config:
Additional Information:
Phase: 11
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 98586, packet dispatched to next module
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow
Nat rules:
nat (inside,outside) source static IPv6_HOST interface service https https
nat (inside,outside) source static IPv6_HOST interface service http http
nat (inside,outside) source static IPv6_HOST interface service ssh ssh
nat (inside,outside) source static INTERNAL interface destination static EXTERNAL EXTERNAL service apcupsd apcupsd
nat (inside,outside) source static IPv6_HOST interface destination static IPv6_POP IPv6_POP
nat (inside,outside) source dynamic any interface
The EXTERNAL is the host that is connected to an outside interface and that NAT rule works ok.
I can ping the EXTERNAL host from the ASA but not from the internal network.
Any ideas would be appreciated.Hmmm, by adding the following i got it working:
nat (inside,outside) source static IPv6_HOST interface service https https
nat (inside,outside) source static IPv6_HOST interface service http http
nat (inside,outside) source static IPv6_HOST interface service ssh ssh
nat (inside,outside) source static INTERNAL interface destination static EXTERNAL EXTERNAL service apcupsd apcupsd
nat (inside,outside) source static IPv6_HOST interface destination static IPv6_POP IPv6_POP
nat (inside,outside) source dynamic inside interface destination static EXTERNAL EXTERNAL
nat (inside,outside) source dynamic any interface
It is a bit complicated though since the EXTERNAL host get it's address via DHCP and so does the ASA. -
Problems with Applications and Overall Software
Recently, my computer has been acting strange. I have only had my MacBook for 1 year. My applications have trouble working when I have a couple of them open. I am constantly getting the color spinning wheel, and when I am using iTunes my music stops and starts randomly. I have tried deleting my preferences folder, using Onyx and cocktail to fix and clean up my computer. Someone please help I do not want to have to get a new computer after 1 year. Do I need more RAM or something? I am only using 20% of mac's memory. It is really slowing me down from doing my work. Ask me for more information if I have forgotten anything.
I think you've misunderstood. It's recommended to have a minimum of 10% free space left on your hard drive not 90% free space. I don't think the amount of data stored on your hard drive is the problem you're having.
-Doug -
Problem with Java and Oracle Database - help !
i keep getting a NullPointerException when trying to
update a resultSet in a servlet. i am bringing in the data
just fine from an Oracle database. but it chokes when trying
to update it. can anybody tell me what is happening?
thanks for any help
Owen
ResultSet rs = stmt.executeQuery( "select * from sw_assets" );
rs.next();
rs.updateString("name","XXX"); <--- BOOM !
java.lang.NullPointerException
at sun.jdbc.odbc.JdbcOdbcBoundCol.setRowValues(JdbcOdbcBoundCol.java:240)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateChar(JdbcOdbcResultSet.java:3767)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateString(JdbcOdbcResultSet.java:3257)
at sun.jdbc.odbc.JdbcOdbcResultSet.updateString(JdbcOdbcResultSet.java:3848)
at _0002fopen_0002ejspopen_jsp_3._jspService(_0002fopen_0002ejspopen_jsp_3.java:87)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:177)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:318)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:391)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:404)
at org.apache.tomcat.core.Handler.service(Handler.java:286)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:797)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:743)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:210)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:498)
at java.lang.Thread.run(Thread.java:484)ResultSets based on a wildcard are generally treated as views by Oracle, meaning they are not updatable no matter how you create your statement. Try either "select swa.* from sw_assets swa" or "select all from sw_assets swa", that should get around the problem.
Also (just being thorough) make sure that you specifically created your statement as being updatable (stmt = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE) ).
I would not normally expect a NullPointerException when encountering this "feature", but then I don't often use the ODBC bridge.
Good luck! I hope this helps. -
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
Discussion Forum Portlet - Problems with JAVA and UTF8?
Hi
I installed the Discussion Forum Portlet successfully. It also seems that almost everything works fine. There's only a problem if I have new posts that include special German characters (Umlaute) like ä, ö, ü or special French characters like é, è or ç. They are saved correctly in the table but if you view the post the characters are not displayed correctly.
Example
input: ça va?
result: ça va?
I know that there are problems with Java and UTF8 Database. Is there a possibility to change this (bug)?
Regards
MarkHere's what I got. I don't see anything that helps but I'm kinda new to using SQL and java together.
D:\javatemp\viddb>java videodb
Problem with SQL java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver
] Syntax error in CREATE TABLE statement.
Driver Error Number-3551
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in
CREATE TABLE statement.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
at videodb.main(videodb.java:31)
D:\javatemp\viddb> -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?
Did you change any AppleID accounts or anything? I've seen this happen when changing accounts or certain restore situations.
If you are using iCloud you should be able to reset your phone to Factory Defaults and restore from iCloud, but it always makes me nervous. -
A problem with a session Access
Hi Olivier,
To connect with Forte while running distributed you must use System DNS
instead of User DNS on the server. The ftexec.exe on your server partition
will be launched by the NodeMgr running as UID SYSTEM. User DNS are not
available to processes running as UID SYSTEM.
Zenon Adamek
Purolator
-----Original Message-----
From: Olivier Andrieux [SMTP:oandrieuxaxialog.fr]
Sent: Tuesday, July 04, 2000 4:59 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) A problem with a session Access
Hi,
We have defined a service object which calls a database Access, when we
use the driver odbc of another station the service object is created and
the application runs. But when we use the driver of the server we have an
exception and this message :
SYSTEM ERROR: Unable to start the partition AxiGecom_CL0_Part1 on any of
the
nodes to which it has been assigned. See the remainder of the error
stack for
more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method InterfaceManager.PrepareLOM
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Unable to start partition AxiGecom_CL0_Part1 on node
SERVEUR59B.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Attempt to load partition named AxiGecom_CL0_Part1 failed.
Class: qqsp_ResourceException
Error #: [1001, 4]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Jul 04 10:49:15
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_cl0_Client",
(partitionId =
EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9.4]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
SYSTEM ERROR: Failed to create service object
Axigecom_Serveur.Connection_BD.
Class: qqsp_ResourceException
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
USER ERROR: (This error was converted)
Failed to connect to database: Axigecom, username: Administrateur.
[Microsoft][Gestionnaire de pilotes ODBC] Source de données non
trouvée et
nom
de pilote non spécifié
Class: qqdb_RemoteAccessException with ReasonCode:
DB_ER_DBMSCONNECTION
DBMS SQLSTATE: IM002
Class: qqsp_ErrorDescriptor
Detected at: qqdb_OdbcVendorInfo::DoSQLConnect at 10
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
for information, we use a server NT and the stations use Nt, the drivers
DNS users are declared.
We use Access2000, and the version M for Forté
Thanks in advance,
Olivier Andrieux
AXIALOG
France
Maybe you are looking for
-
How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it? My daughter forgot the new code she put in....
-
With FBA, How to get rid of Login popup while opening document in library
I've enabled fba with custom login page. I've document library.While trying to open document, it asks for credentials everytime. Due to FBA with custom login page, it does not close the login popup automatically. How can I get this resolved?
-
Hi, I need to change my old lithium battery 3.6v on my G4. Do you know the size of this battery, and where to buy it on the web? Thank you. berdavid.
-
HT1414 my ipad went dead nothing happens when I plug in charge. Any ideas?
My ipad went blank in the middle of using it. It was at 40% power but I can't get it to show anything on the screen. Doesn't make any sound or anything. Any ideas?
-
Air Mobile Apps cannot support printing ?
Dear all, I am developing a writing notes application in Flex Mobile Apps for android and ios. How can i allow use to print out the notes written? Anyone can guide me how to achieve the printing to the printer?