Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun fatha/damma etc. would reverse automatically. Is this a known bug?
Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!
Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ
Similar Messages
-
Handling the context when integrating SAP with WBIMB
I need to integrate SAP systems with an integration platform that is based on WebSphere Message Broker 5 (WBIMB). Now I am looking for a feasible solution to integrate these platforms.
I am concerned about how to handle the context when integrating SAP with WBIMB.
I have read the topic SAP XI and WBI adapters (SAP XI and WBI adapters) in this forum with interest. However, my requirements are slightly different, and my knowledge on development in SAP is limited.
The WBIMB integration platform acts as an Enterprise Service Bus in a SOA. We have a general requirement about guaranteed delivery i.e. once and only once, and therefore the transport protocol is MQ. The HTTP protocol does not satisfy this requirement. Thus we can use Web Services when they are carried as SOAP messages over MQ, but SOAP/HTTP is not acceptable.
The SAP systems can act as service provider as well as service consumer. The WBIMB act as an intermediary, which routes service requests to the proper provider and service responses back to the consumer.
When acting as a service consumer, the SAP system shall specify the context such that WBIMB is able to route the service request to the service provider. Routing is based on the context, which is specified as a property in the MQRFH2 usr folder. Thus the MQ message containing the service request from the SAP system shall specify this usr property, and the value will depend on the requested service. In JMS, the value can be set by calling the TextMessage.setStringProperty method e.g. as TextMessage.setStringProperty(MyContext, XYZ).
When acting as a service provider, the SAP system shall pass the context from the request back in the response message to WBIMB. Actually, I want to pass the complete usr folder from request to response, because it contains more information than just the context property.
I need answers to the questions:
1. How can I set the context from SAP when it acts as service consumer?
2. How can I get SAP to pass the context (MQRFH2 usr folder) from request to response when it acts as service provider?
3. I have looked at the SAP XI JMS Adapter. It looks as I can set additional JMS parameters. But the property value will depend on which service to call. Do I need to setup a JMS Adapter per service or can I set the value dynamically?
4. Can the SAP XI JMS Adapter pass the context from request to response?
5. Are there better alternatives than using the SAP XI JMS Adapter?
Many thanks for any help you can give me in advance.Hi Daniel,
Thanks for your answer. I expected it would turn out this way
So the good news is that when SAP is acting as service consumer it sounds fairly easy to set up a mapping from XI message to MQ context.
But when SAP acts as service provider it sounds as more customisation is required and I am worried about having to save the state. It will hit performance when the context is not carried as part of the message. In this case I prefer to use a generic solution on WBIMB, where I can handle the context for SAP (as well as other service providers). Then I only depend on the ability to set correlation in the response. But it will still cost performance because WBIMB also has to save the state on temporary MQ queue.
Ideally, the SAP XI/Adapter should be able to pass the context 'out-of-the-box' to better support intermediaries like the WBIMB as ESB. I put this on my wishlist
Anyway, I appreciate that you was able to confirm my observations.
BR
Allan -
I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.
Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again -
Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?
If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.) -
how do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.
Go to Settings/icloud. The Apple ID at the top of the screen is the only one you need to be concerned about. That one MUST be a working ID, and you must know the password for it, or you will be unable to use the phone if it ever crashes, you want to update it, or you want to sell it.
-
Are you aware of a possible bug in version 3.6.23? In the browser, for example, "two/" appears with the slash through the "o". Is this a known bug?
When the same text is view in another browsers it appears correctly as "two/".
I've checked, and the same problem appears in Firefox on another computer.
The two answers received so far have not provided an answer: is this a known bug in Firefox?
Thank you.You are on a Mac and that is a [http://en.wikipedia.org/wiki/Kerning kerning] problem. Don't you see the same problem in other applications if you choose the same font, font-weight and font-size.
I only find one other kerning [https://support.mozilla.com/questions/789254 question] here -- it is marked unsolved. I find it strange that Firefox got involved with this at all rather than leaving such things to the operating system and font metrics.
Does the problem go away with "command+0" (zero) which resets [http://kb.mozillazine.org/Zoom_text_of_web_pages zoom level] to normal. If you mess with the font sizes in your preferences because you want larger print that would have the same effect.
Also found this one recently reported for [https://support.mozilla.com/questions/892222 Firefox 7 in ubuntu 11.04] which appears much worse. If it involves Firefox and specific operating systems it becomes a lot harder to diagnose who or what is responsible. -
Calendar adds an extra day when creating an event in ios 8.1.3. Is this a known bug?
When i add an event using the calendar app in ios 8.1.3, it adds an extra day to the event when using a range of dates. I am able to recreate the problem. when entering the event i select a range of dates and confirm that it is what i want. after submitting, i verify and it has added an extra day at the end. Is this a known bug or am i on my own? Help please. this is annoying having to check each event after entering it.
Ive reset, restored and this is the second phone. Thought it maybe a wonky screen that would shift it while setting dates. THe only thing I can think of is that I am syncing with google calendar, but it only happens when setting events in ios not if i do it from google website on desktop PC.
-
Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee -
Dear Members (and Apple Team)
I have two iphones 4 and two bugs on the white one
1/ Is the first gen (Black)
2/ Is the second gen (White MC604FB)
I both uptdated the into Update iOs 6.0 -
Bug 1 : With the white iPhone 4 i have a real Wifi Problem, as close as 5 to 7 meters from any WiFi spot, i lose the signal, where my "black" iphone at the same time and same distance shows full signal (and tested with safari.... works).
Bug 2 : Once the white iphone is in "stand by" when trying to unlock on incoming call, the touch screen works and receive the touch information, but it bugs on trying to unlock to receive the call. (very very anoying :o) have to call back almost every time.
Are those already known bugs ? Is there a fix ?
Reagrds
AlexandreDear Diesel
Thanks for your prompt reply.
I did restore before posting, in evry possible way. no improvment.
I have 24H ago updated to iOS 6.01. So far no more "screen jam" on incoming calls, but the wifi is still inconsistent with very poor signal strenght (compare to my black iphone 4)
PS : For information, did beleive there was two versions of iphone 4 (In Europe ) :
1/ Is firts generation "gen" with With board MC603FB
2/ The white one for me with board MC604FB -
I used to have mobileme which never really worked properly, and now i would like to use Icloud which work between my Iphone and Ipad, however when i synch with my macbookpro, it does not synchronize properly. Can u please help me?
Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem?I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem? -
Problem with skype contacts added each time when I sync with my computer
Dear Black Berry,
I have a Business edition Black Berry Q10 model phone. The problem is I see duplicates of my skype contacts, day by day its getting worse. Im unable to find a solution for this. Need your help!!
How can I stop these contacts duplicating in my address book?? Where is the exact problem??"barbara" wrote in message
news:506500000008000000FAC20000-1077587809000@exchange.ni.com...
> I'm using the simulation interface toolkit V2.0 but it works only the
> first time after the installation. When I restart again my computer it
> doesn't work any more. Why??????????
>
---snip
I am not familiar with the different software that you mentioned but as a
first step I would check compatibility which is done as below:
Get original operating system CD that was used to install Windows XP on the
machine in your post. When Windows XP is inserted into CD ROM drive it
normally will ask you to conduct compatibility check for the current
installation. See what it says.
HTH
Mohan Pawar
----snip -
When I take photos whit my IPhone 4 camera the pictures look great but recently when I send pictures to friends or try posting them on Facebook the photos loose their quality dramatically and the ones that I sent all look blurry and bad compared tothe original. Please somebody help! I always take pictures with my iPhone and send or post them and this problem is restricting me a lit. Thanks for your help :)
when I could open iPhoto the library had tripled... photos from years ago from my iPhone and iPhoto had somehow come back onto it (even though I deleted them), the "faces" files had turned into their own photos, photos tripled (some smaller versions some bigger), and loads of random clip art and images I had never seen was on it. There was over 40,000 photos. It was so weird
Nothing weird. That happens when you import one iPhoto Library into another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
As for deletions:
Drag the image from the Event to the iPhoto Trash. Empty it. Then Empty the System Trash. That removes it from the hard disk.
If that has failed in the past it was due to the Library being corrupted.
Hello from Clare. -
Cannot get the font size to enlarge when on sites with very small print.
Although there is a place to enable Firefox to enlarge small print, it never works (except on this site, of course). A number of sites I visit have very small print and are hard to read, including AOL mail. Wondering if it is a problem with my computer or with Firefox for me. I have tried the settings change (no response on it), and also the AOL mail settings. The settings says that you can put in the maximum size by hand and it will automatically do it, but not for me. With poor vision, it would be nice to be able to have it at least near the size that has come through on here.
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/ -
Has anyone else experienced this?
I thought it was a monitor problem at first, but I'm using a 10-bit per channel Eizo. It seems to be a Photoshop bug based on many layers interacting with each other. When I flatten everything is fine. But I need to work on this image with layers and decent fidelity. Interestingly when I convert to 8-bit without flattening (and utilising the dither function to potentially reduce banding even further), it uses the terrible artifact laden/banding to do the conversion even though when I zoom into 1:1 in my 16-bit document it looks fine. But 50% or 25% zoom I suddenly get these awful artifacts.
Here's some screenshots to clarify. Please note I've used Photoshop for 24 years so I'm no slouch but this is the first time I've seen this. The problem is I need to do some subtle airbrush and texture work on this and it's almost unusable unless I flatten (please note, it does the same in the original 8-bit file and just to say I Gaussian-Blurred every layer with a 30px radius after converting to 16-bit so the there's no longer any 8-bit information in there or reasons for banding/artifacts). I can only think it is some of bug in Photoshop's layering engine.
Has anyone seen this before - dealt with this before?
Thanks in advance.
Not sure these embedded images will work.
8% zoomed - see all the strange banding and triangular artifacts
<a href="http://imgur.com/izrGuia"><img src="http://i.imgur.com/izrGuia.png" title="source: imgur.com" /></a>
Flattened view - all smooth:
<a href="http://imgur.com/Pn35IAK"><img src="http://i.imgur.com/Pn35IAK.png" title="source: imgur.com" /></a>
50% zoom, still there:
<a href="http://imgur.com/Z207hFd"><img src="http://i.imgur.com/Z207hFd.png" title="source: imgur.com" /></a>
100% artifacts disappear:
<a href="http://imgur.com/6aGOz0V"><img src="http://i.imgur.com/6aGOz0V.png" title="source: imgur.com" /></a>
100% 16-bit layered
<a href="http://imgur.com/0XJfe5e"><img src="http://i.imgur.com/0XJfe5e.png" title="source: imgur.com" /></a>
and finally 8-bit layered converted from 16-bit with dither.
<a href="http://imgur.com/PSxiu43"><img src="http://i.imgur.com/PSxiu43.png" title="source: imgur.com" /></a>
help!I can't speak to why, perhaps someone more knowledgeable than I can speak to that. But if it only happens at certain views then it's purely a display issue; it won't happen in print or when you downsample to display size. Such banding issues have always disappeared for me when I output to 8 bit.
I'd assume that it's because of your monitor; it can't display all the colors and when zoomed out there's too wide of a range in a small area so banding occurs. But that's just my guess.
Maybe you are looking for
-
Running a crystal report from a local machine
HI guys i'm hoping someone can help me. I have created a silverlight / asp WEB application that has a crystal report in visual studio 2010. The problem i have is that i've deployed my website to a shared webhost that does not support crystal. Until i
-
In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!
-
Call flex remoteObject data in a loop
here is simple explanation, I need to show some panel and some buttons in that panel. consider we have 5 panels, so i use for loop for 1 to 5. inside that panels Button name comes from java using remoteObject and blazeds. Now my problem is remote obj
-
Trying to delete multiple contacts at once on iPhone
I wanted a large (~200) subset of my contacts (within Outlook) to be added to my iPhone, so I used the iTunes Contact Sync to get all of my contacts there (rather than type in 200 with the iPhone keyboard, which leaves something to be desired). Now I
-
Anyone problems with photomege in PS CC 2014 ?
( Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64 ) Photomerge does not work any more. Both on PC and MAC since last update. Anyone else have this problem ? This is the point where PS keeps thinking forever ! The c