Problem with different Labview platform

Maybe this issue must be address to NI.
I have this library calling a register DLL. The purpose of the library is to convert a type of movie file from hard drive(*.mcf type) to image stream then to show and eventualy to save it.
The DLL is designed by NAC camera designer, which is a high speed camera. The code is based on properties, methodes and events from DLL.
Code works well in Labview 8.6.1, in Labview 11.0.1, Labview 12.0f3. Unfortunately code does not work in Labview 11.0.1f2 which happens to be the one I am developing my applications.
I will post the code developed by NI Japan (camera also is designed in Japan) and the mcf file as well as the DLL which must be registered.
The code is compiled in 8.6.1.
Register first the dll then open the NAC MCFF Control_E.vi.
Brows the mcf file
Press Open button
Slide the frames one by one for showing the images content of the mcf.
If you want to open under other labview then 8.6.1 then copy the folder and run a mass compile under that version then open the same top vi.
Please, show me what is different for different versions of labview then in my version does not work.
Than you,
Virginia
Solved!
Go to Solution.

Just because it doesn't crash does not mean automatically that everything is alright. You just might be unlucky that the memory corruption does not happen in a vital part of the LabVIEW memory.
Now, when loading your LLB in LabVIEW on my machine, the first indication that something is wrong would be the error message that C:\Windows\System32\gdi32.dll could not be found. And indeed this is a system DLL that should never be referenced by the full path but simply by the DLL name alone. So change the Library Name or Path in the CLN inside the nac_NI_BitmapRead.vi to just "gdi32.dll" (without quotes). And when you are at it, change the first parameter to be a pointer sized integer too, since this IS a pointer.
Now look in the configuration dialog in the Function tab a bit further down and notice that the Calling convention is set to C. 99% of all Windows userspace APIs are really stdcall under Win32 and fastcall under Win64. A "bug" in LabVIEW versions before 2009 attempted to automatically fix wrong calling conventions from C to stdcall, based on certain naming attributes of the actually exported function in the DLL (and no, LabVIEW does not show those decorated names but the human readable name). The problem with this fix was that it did not allow for calling (admittingly seldom but nevertheless possible configurations) of DLL functions that happen to follow this naming scheme but were explicitedly declared cdecl by the programmer.
Try it and tell us if that will help.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

Hello,
I have been using this query in oracle 8.1.7
SELECT
ID,
AREA_NO
FROM MANAGER_AREA MGR
WHERE COMPANY_ID = :id AND
(:value < (SELECT COUNT(ROWID)
FROM MANAGER_WORK MW
WHERE MW.AREA_ID = MGR.ID AND
(MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
order by AREA_NO;
In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
Thanks in advance
Amol.

I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
Amol.

Problem with different calendars under Mountain Lion

I upgraded recently from Snow Leopard to Mountain Lion and experiencing an annoying problem with the calendars "On My Mac" (I am using a MacBook Pro from mid 2009). With iCal under Snow Leopard I had seven calendars - Meetings, Performances, Family, etc. with different colors. After the switch to Mountain Lion these categories aren't maintained properly. Four of them have been seemingly merged into two, so that for example an event can't be categorized as "Family" but gets shifted automatically to "Meetings" (both calendars stay checked in the editing panel, but only one "sticks"). So I have three calendars I can use and a four I can't.
If I try to add a new calendar it appears in the list, but no event can be assigned to it.
Is there a limit to the number of calendars one can have?
I don't use iCloud, so there is no issue there.
I have one Google calendar (a work schedule I have subscribed to ) which also works with no problems.
Any ideas?

Same problem when reseted the PRAM.
I read some Chinese Web , Many people got the same problem after upgrade to mountain lion
you can see the locked icon show in the bottom left conner even my card is unlock
I can read but can not delete any Photos
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23227AM .png
you can see the locked icon show in the bottom left conner
But I can edit everything in my Harddisk
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23235AM .png
External Hard Disk no locked icon show in the bottom left conner
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23220AM .png

Problem with different versions of Page Headers

Gurus, I have a strange problem. I need to have different Page Header format for first page and another format for the rest of the pages. So as suggested in the forums, I did the page setup for Header and Footer with “different first page” option in MS Word. This is not working. I am still seeing the First Page Header format on all the pages. I checked the RTF, there is no section break or any other special breaks in there.
Any idea why it is not working ?. I can send the Word doc and XML input files.
Thanks
Sub

Is there some way to attach the RTF template and XML input here?.

Problems with Java (TM) Platform SE 7 U45 update

The recent Java (TM) Platform SE 7 U45 update is causing problems with the Java plugins in Firefox 24. This is described in:
Java Plugin Security Issues
A second issue relating to this Java Platform SE 7 U45 update is the "Configure Java" item keep appearing on the Start Menu Recently Used Programs List as seen in the screenshot. Normally, I can remove an item by right clicking on the Start menu and selecting "Remove from this list". But in the "Configure Java", it will not go away, I keep right clicking and selecting "Remove from this list" repeatedly and "Configure Java" is still on the Start Menu Recently Used Programs List.
http://i.imgur.com/R560W7Q.png
Then I reboot the system and then right click on the Start menu and select "Remove from this list". This time it remove "Configure Java", but then "Check For Updates" items appear. Again I remove "Check For Updates" and "About Java" will appear. After I remove "About Java", I have cleared all the items from the Start Menu Recently Used Programs List.
I thought the issue is over but it is not. If I run ccleaner and clean up the system, "Configure Java" will somehow mysteriously show up again on the Start Menu Recently Used Programs List. Again I can repeatedly select "Remove from this list" and it will not remove "Configure Java" from the Start Menu Recently Used Programs List. If I reboot the system, then I can remove "Configure Java", "Check For Updates", "About Java" by selecting "Remove from this list".
At no point, after each reboot, I run "Configure Java", "Check For Updates", and "About Java", so I do not know why it keep showing up on the Start Menu Recently Used Programs List. I want to see the recently used programs and have the ability to remove them. But I do not want to see "Configure Java", "Check For Updates", and "About Java" on the Start Menu Recently Used Programs List because I did not run them. And if "Configure Java" does show up, I want to have the ability to remove it without rebooting.
How do I prevent "Configure Java", "Check For Updates", and "About Java" from showing up on the Start Menu Recently Used Programs List without affecting other programs to show up?

This is the link for Windows 7 which I'm on:
Clear lists on the Start menu and taskbar
My present settings:
[checked] Store and display recently opened programs in the Start menu
[unchecked] Store and display recently opened items in the Start menu and the taskbar check box.
If I unchecked "Store and display recently opened programs in the Start menu", that will not store and display any other programs including Java. I want to see CCleaner on that list if I run CCleaner. If I didn't run it, I don't want to see it on the list. And I don't want to see Java because I did not run Configure Java or Check or Updates manually.
The big question is why did "Configure Java", "Check For Updates", and "About Java" showed up on the list of "recently opened programs in the Start menu"? I didn't run these Java programs ("Configure Java", "Check For Updates", and "About Java") Can I prevent them from showing up on the list?

Problem with different execution paths in hierarchical query

Hello,
I have problems with the following query:
SELECT DISTINCT P.ID FROM PRODUCTELEMENTIMPL P WHERE ( ( LABEL = 'SomeLabel' AND PRODUCTELEMENTTYPE = 'SomeText' AND ( STATE = 'created' OR STATE = 'stored' OR STATE = 'archived' OR STATE = 'archivedRestored' ) ) ) START WITH P.ID = 42 CONNECT BY PRIOR P.ID = P.PARENT
We have two databases (an Oracle 10g XE and Oracle10g Enterprise). In the XE Database the query is executed very fast, but in the main installation it takes minutes. If I "explain" the query I get two different execution paths:
The fast:
ID      PARENT_ID      LEVEL      SQL      Kosten      Anzahl Zeilen
0      -      1      SELECT STATEMENT      20      49
1      0      2      HASH UNIQUE      20      49
2      1      3      FILTER      -      -
3      2      4      CONNECT BY WITH FILTERING      -      -
4      3      5      TABLE ACCESS BY INDEX ROWID PRODUCTELEMENTIMPL (TABLE)      -      -
5      4      6      INDEX UNIQUE SCAN SYS_C0072201 (INDEX (UNIQUE))      2      1
6      3      5      NESTED LOOPS      -      -
7      6      6      BUFFER SORT      -      -
8      7      7      CONNECT BY PUMP      -      -
9      6      6      TABLE ACCESS BY INDEX ROWID PRODUCTELEMENTIMPL (TABLE)      19      49
10      9      7      INDEX RANGE SCAN PRODUCTELEMENTIMPL_IDX1 (INDEX)      3      49
11      3      5      TABLE ACCESS FULL PRODUCTELEMENTIMPL (TABLE)      19      49
Slow:
ID PARENT_ID LEVEL SQL Kosten Anzahl Zeilen
0 1 SELECT STATEMENT 1 1
1 0 2 HASH UNIQUE 1 1
2 1 3 FILTER
3 2 4 CONNECT BY WITHOUT FILTERING
4 3 5 TABLE ACCESS BY INDEX ROW 3 1
ID PRODUCTELEMENTIMPL (TABLE)
5 4 6 INDEX UNIQUE SCAN SYS_C0 2 1
020528 (INDEX (UNIQUE))
6 3 5 TABLE ACCESS FULL PRODUCT 6628 1100613
ELEMENTIMPL (TABLE)
Any ideas how to avoid this full table scan?
bye
Roland Spatzenegger

Hello,
thank you for your replies. The indices and table schemas are the "same", but only the content for the tables was mirrored.
We made some tests with dropping and/or analyzing the tables, but it didn't change anything.
The main problem is that the query takes 33s in the productive environment for searching in a couple of rows. At the moment it's faster to make
SELECT DISTINCT P.ID, P.STATE FROM PRODUCTELEMENTIMPL P WHERE ( ( LABEL = 'SomeLabel' AND PRODUCTELEMENTTYPE = 'SomeText' ) ) START WITH P.ID = 42 CONNECT BY PRIOR P.ID = P.PARENT
and to test in the application if the state-values match ;-)
If I add the hint /*+ no_filtering */ in the test environment, I get the same "slow" execution path as in the production environment. So the question is, what prevents the filtering in "connect by"?
(I think in the fast version it filters only the results of the hierarchical query, in the slow version it first filters the whole table and joins/merge it with the hierachical result).
bye
Roland Spatzenegger

Problems with matlab labview interface

I wrote a code to check the interface of Matlab and LabView. I am reading a matrix from a file and created two 1D subarrays using index array out of it. I am passing the subarray as input in the matlab script to calculate its length. With subarray 2 in the vi I am getting the result I expect. When I choose the subarray 1 as input to the Matab script, LabView crashes.
Is there any problem with my code?

There is no need to host files somewhere else. Feel free to upload them to the forums and attach them to your post.
Minor comments first. Why are you re-reading your config file every 2 seconds? Do you expect it to change? If not then read it once and don't read it again.
I think it would be best if you stopped when an error occured, you can do this by wiring an error to the Or going into the stop condition, or use the compound arithmatic with Or.
But I think the major issue you have is that your Arduino reference can be wipped out if you do things wrong. If your equal comparision is false you go to the false case, where you aren't passing the arduino reference. So when you go to close you won't close your reference, and your hardware will still be open, and trying to run again will result in an error. Similarly if your for loop runs for 0 iterations your reference is lost. Attached is an updated version which has some of these changes.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Prueba 1 Hooovahh Edit2.vi ‏765 KB

There are two separate login problems, with different solutions

I have just spent a couple of hours fixing a 24in iMac that kept rejecting the account login after installing Leopard. (login with correct password goes to blue screen then back to loginscreen)
I went through the Apple tech doc that had you logging in as a single user (Cmd-s) and it did not work.
What did work for me was an archive and install of Leopard.
It seems that anyone with a new iMac that installed the recent imac update is having this problem. For those people, archive and install seems to work.
http://discussions.apple.com/thread.jspa?threadID=1214059&tstart=0
For other people, the single-user instructions seem to work.
http://discussions.apple.com/thread.jspa?threadID=1202129&tstart=0
hope this helps
cheers
bruce

> When working with word, documents or emails in the middle of a sequence
> the picture or window suddenly is yanked off the screen to the right.
Microsoft Word? What version and service pack?
Microsoft Office 2011 SP2 includes Word version 14.2.2. Some Office 2011 updates addressed problems with Lion.

PM8M-V compatibility problems with different rams?

hi, can anyone help? i'm having problems with two rams...as one is a geil 512 DDR3200 ram and the other a kingston 256 DDR3200 ram. problem is the first boot is ok as bios detects both rams...but after shutting down and restarting again, the system only detects the 256ram... but if i only put the 512, its ok on its on. if the 256, its ok on its own too...but if both, the it won't boot up or sometimes if i'm lucky it only detects the 256 if both is in...any suggestions?
RIG:
P4 3.2Ghz
Geil 512 DDR3200
Kingston 256 DDR3200
SATA II Western Digital 120GB

sadly with only 2 dimms...it doesn't really work...so how? sigh...i don't think the seller will allow a change don't they?
P/s oh ya i happen to notice that ya kingston ram is at 380mhz? err in my bios its only at a auto mood of 200mhz...is that ok?

Problems with different received message from sql function

Hello all!
I have a little problem with my BPEL process. I call a sql function that returns a string. In this string I have a xml. The returned message can be something like:
<error><id>id_error</id><message>descr_error</message></error>
or
<comm>
<header>
children tags
</header>
<body>
children tags
</body>
</comm>
As you see, I can receive two types of messages. Of course, the process transforms string -> xml.
Depending on the type, the process must choose between two flows.
My questions are: what should be the solution(the steps) to determine what type of message the function returns? In my project, where should I define the same message types in order to assignate them to a variable? In a xsd?
Thanks in advance!!

seems like you could solve this with a <pick>. Take a look at the section "One Request, One of Two Possible Responses" in chapter 13 of the bpel developer guide.

Problems with different versions of ColdFusio

Hello There
I installed CF8 using the multiserver option and also
deployed CF7 on the same JRun without checking to create a service.
I also downloaded the latest version of the Java SDK (1.4.2_15) and
installed on my machine. I created a different jvm.config file
(jvm_cfmx7.config) in my JRun bin directory pointing to this new
JVM JRE's directory.
I also created a new Windows Service using jrunsvc without a
problem. My only issue here is that when i try to start this
service (through Windows Services) it doesn't start and returns me
an error saying only to contact the manufactured.
Please, any help will be much appreciated.
Thanks
Alvaro Costa

You could just install each one, copy the dir, uninstall, create a batch file with the appropriate paths to the copied directory and then run using the batch files.
(Note of course that Java itself isn't responsible for correctly running itself. Rather it is up to the developer/company to create a product that recognizes that it is not the sole product in the universe and thus behaves correctly.)

Javasript problem with different browser

I have two problems in my web application:
1. I am using javascript to hide text field .The way it works is,when you click on the radio button it will display the hidden fields.It works fine with Internet Explorer,its not working with mozilla
javascript code:
function openXmlpageField()
     blnMoreIsUp = true;
     document.all.item("MORE2", 0).style.visibility = blnMoreIsUp ? "" : "hidden";
within jsp:
<table>
<tr>
<td width="255"><bean:message key="prompt.appl.Xmlpage"/></td>
<td> <input type="radio" name="image"onClick="openXmlpageField()"/>select</td>
</tr>
</table>
<div id=MORE2 style="visibility: hidden">
<table>
<tr><td width="330">�</td>
<td><html:text property="image" size="40"/></td>
</tr>
</table>
</div>
2.I have script to popup a different window and display html file when you click on the radion button.
javascript code :
function openPopup3(){
     var popurl="foldername/filename.html"
     winpops=window.open(popurl,"","width=400,height=400,scrollbars,")
this is fine with IE .When I try on Mozilla it complains about the relative path that I have mentioned in the script.
Mozilla recgonizes it this way http://localhost/applicationname/foldername/foldername/filename.html
Is relative path different for different browser?
I want my application to work with almost all browsers.Please help me to make it work with Mozilla.

You should ask your question in a javascript forum

UIView Animation Problem with different Controllers

Hello!
I have a problem regarding the UIView animation and therefore, I have three questions:
1. is it possible to flip from view old to view new whereby each of the views have their own controller?
2. Can I only flip views sharing the same controller?
3. Maybe someone could help me with the following issue: I have two views, and each of the views have their own controller.. the code snippet illustrates my approach.. When i start my code, the new view is added on top of the old view, and the flipping animation is animating the old view only behind the new view.. Sure, this is not what i want to have.
MapPrototypeAppDelegate *app = (MapPrototypeAppDelegate *)[[UIApplication sharedApplication] delegate];
ReadGroupsViewController *aReadGroupsViewController = app.readGroupsTableViewController;
UIWindow *window = app.window;
[UIView beginAnimations:nil context:nil];
[UIView setAnimationTransition: UIViewAnimationTransitionFlipFromRight forView:[self.mapView superview] cache:YES];
[UIView setAnimationDuration:1.3];
[UIView setAnimationDelegate:self];
[window addSubview:[aReadGroupsViewController view]];
[UIView commitAnimations];
thanks..

sommeralex wrote:
1. is it possible to flip from view old to view new whereby each of the views have their own controller?
Yes.
2. Can I only flip views sharing the same controller?
The flip animation may be used to transition between any "old" and "new" view without regard to whether those views have different controller's, the same controller, or no controller at all.
3. Maybe someone could help me with the following issue: I have two views, and each of the views have their own controller.. the code snippet illustrates my approach.. When i start my code, the new view is added on top of the old view, and the flipping animation is animating the old view only behind the new view.. Sure, this is not what i want to have.
MapPrototypeAppDelegate *app = (MapPrototypeAppDelegate *)[[UIApplication sharedApplication] delegate];
ReadGroupsViewController *aReadGroupsViewController = app.readGroupsTableViewController;
UIWindow *window = app.window;
[UIView beginAnimations:nil context:nil];
// the next line is puzzling. what is 'self.mapView', and what do you expect its superview to be? If 'self' is a
// view controller, what is the relationship between its 'view' property and its 'mapView' property? Does 'view'
// also have a superview? Is 'view' above or below 'mapView'? Is there a view between 'mapView' and the window?
[UIView setAnimationTransition: UIViewAnimationTransitionFlipFromRight forView:[self.mapView superview] cache:YES];
[UIView setAnimationDuration:1.3];
[UIView setAnimationDelegate:self];
// apropos the question above, what view is being covered in the next statement?
[window addSubview:[aReadGroupsViewController view]];
[UIView commitAnimations];
I think I need a better understanding of the view hierarchy we have before aReadGroupsVC.view is added. The problem you're having is probably caused by passing the wrong view as arg here: [self.mapView superview]. But I can't say for sure since I don't know how mapView is related to the view hierarchy, and I don't know what it's superview is. It might be easier to just explain your "old" view structure and tell us how you want it to change after the flip transition.
- Ray

P7N Diamond - Problems with different things

Hi, n0id here.
I have recently bought a computer in parts (from different web shops).
Yesterday I finally got the processor and was able to build the computer, so I started building the computer.
After about an hour of mounting the parts, I decided it was finished, so I powered it on and watched it boot.
The first thing I noticed was that if my USB Keyboard was plugged in, POST would freeze at "Initializing USB Devices".
I figured it was only temporarily, so I switched to a PS/2 Keyboard, which helped.
The next thing that happened was the BIOS was not able to find my Hard Drive (SATA). I was wondering if because the motherboard support SATAII if SATA drives wheren't compatible. I opened the case and saw that the SATA cable wasn't plugged in properly. So after putting it back in properly, I booted the computer again.
So, now that POST was running OK and BIOS found all my components, I decided to install Windows XP.
After about a minute of reading the cd (windows initializes the installation program in DOS) it stopped reading, and the computer freezed. Finally, It got to the point where I can partition the HDD. But the computer would always reboot at this point. I haven't figured out why yet.
So I connected the HD to my old computer and installed windows here. That worked.
I reconnected the HD to the new computer and after windows loaded, I got a blue screen and the computer would reboot again.
So I decided to remove some of the components. I removed one RAM module, the soundcard (Creative XFI Gamer) and unplugged the 120mm back fan. At this point I was able to format the drive and install windows without a problem.
So I decided to insert the components again, but when I then started the computer, I didn't get a picture on the monitor. I tried with a different monitor and with a different graphics card, neither of which made a difference.
At that point I went to bed because I had already spent seven hours trying to figure things out and it had gotten very late.
So now I am here asking for any guidance.
My computer specs are:
MSI P7N Diamond motherboard,
2x 1Gb Kingston 1066 Memory modules running at 1.8v,
Geforce 7900GS,
Creative X-Fi Gamer soundcard,
Intel Q6600 G0 @ 2.4Ghz,
Thanks for any help.

Hello again.
I am trying to overclock my Q6600.
Everytime the FSB is over 267mhz (2.4ghz CPU Clock) I get a BSOD: "IRQ_NOT_LESS_OR_EQUAL".
Then it's dumping the memory and restarting.
When Windows starts up again, the FSB is back at 267mhz.
I am using the application MSI Dual Core Center, that followed with my motherboard.
I noticed in this application that memory voltage was set to 1.9v. The memory modules I bought are 1.8v because when I bought the MSI P7N Diamond, it said it only supported 1.8v memory. aww :S
Anyway, my full specs are:
Intel Q6600 (G0 stepping) - 2.4ghz
MSI P7N Diamon (7510) Mainboard
1x 1GB Kingston (KVR1066D2N7K2/2G) memory modules, 1.8v, 1066Mhz,
Antec NeoPower 650 (650W, 3x 12v @ 16A)
GeForce 7900GS
Creative X-Fi Gamer
Win XP Pro, SP2.
I am going to browse around the forums for similiar problems, though I thought I'd post this now.
After browsing the forums I've learned a few things.
My Q6600 has a VID of 1.3250 and the box it came with said that 1.35v is the max. So I have changed the voltage to +0.0250 and was able to clock the CPU to 2.67Ghz without a problem (temps are 33 - 36 celcius on idle.)
My question this time is: even though the box says 1.35v max will I safely be able to set the voltage higher than that?
I would assume that Intel is setting a maximum that is lower than the actual max, just to keep the processor safe. But I do not know stuff like that :P
My target is 3ghz, and if reaching that clock means I need to apply a greater voltage than 1.35v, and it isn't safe; that would totally suck.
edit,
To achieve 3ghz I supplied these settings in the BIOS:
FSB: 1333 Mhz
DRAm: 800 Mhz
EIST: Disabled
Multiplier: x9
Nb voltage: 1.35
FSB Term.: 20
CPU GTL Fef: 5
The cores are currently at 36-38 at idle, compared to 28-32 on stock clock.
I will see if I can buy some extra fans to put in the front to blow cool air into the case, and maybe buy a new cpu cooler.
Btw, the vCore is 1.3v (and it's also set to auto in bios).

SCC with different LabVIEW versions

Hi. I have many different projects, and some of them are in older versions of LabVIEW. I was wondering if there is support and what kind of support there is for older versions in the SCC tools of LabVIEW 6.1

We don't offer any cross versions tools for the source code control because VIs are generally saved in the LabVIEW version in which they were edited. If you want to use SCC with a project in an older version of LabVIEW, we recommend checking the files out of the master directory into the local, opening the VIs from the old local with LabVIEW 6.1, saving, and putting the VIs in a new project with the 6.1 SCC. This way you leave the old master directory intact for backup purposes.
Jeremy Braden
National Instruments

Problem with different Labview platform

Similar Messages

Maybe you are looking for