Problem with flash element in Dreamweaver
Hi, I am a little new to dreamweaver and am starting up a new
site with a flash element. I have started this out and it works
great on my computer when i preview it, but the flash element isn't
showing up when I publish it. When it loads in the browser it says
the page is "Done, but with errors" and when I click on that it
tells me that the problem is in line 12 of my code which is:
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','1027','height','53','src','menubar','quality','high','pluginspage','http://www.adobe. com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','menubar'
); //end AC code
I have also published the swf and the AC_RunActiveContent.js.
I have published the site to
http://www.sectiondesign.com/porcelain/porcelain.html
any help would be great.
Thanks a lot
misner51 wrote:
> Hi, I am a little new to dreamweaver and am starting up
a new site with a flash
> element. I have started this out and it works great on
my computer when i
> preview it, but the flash element isn't showing up when
I publish it. When it
> loads in the browser it says the page is "Done, but with
errors" and when I
> click on that it tells me that the problem is in line 12
of my code which is:
>
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=9,0,28,0','width','1027','height','53','src','menubar','quality','high',
> 'pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Vers
> ion=ShockwaveFlash','movie','menubar' ); //end AC code
>
> I have also published the swf and the
AC_RunActiveContent.js.
> I have published the site to
>
http://www.sectiondesign.com/porcelain/porcelain.html
Base upon:
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
You page is looking for the JavaScript file at this location
but cannot find it:
http://www.sectiondesign.com/porcelain/Scripts/AC_RunActiveContent.js
I also checked here:
http://www.sectiondesign.com/Scripts/AC_RunActiveContent.js
and did not find the file. Make sure that you upload the
script to the appropriate location, or adjust the path so that it
points to the place where you uploaded the file to.
It appears that your menu SWF file is present at:
http://www.sectiondesign.com/porcelain/menubar.swf
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert
Similar Messages
-
Problem with flash player in dreamweaver
Hello there, I think I need some help. I have a site, and I want to put a custom flash player into a side bar here: [url=http://www.shrani.si/?26/10F/WgXnpnB/problem1.png][img]http://www.shrani.si/t/26/10F/WgXnp nB/problem1.jpg[/img][/url] ( fotoshoped picture) but if I test it in real it jumps out like this ( please don't mind the different player resolution): [url=http://www.shrani.si/?1G/T4/3AU4XOU7/problem2.png][img]http://www.shrani.si/t/1G/T4/3AU4XO U7/problem2.jpg[/img][/url] ( in dreamweaver it's shown like it suppose to be. Any ideas?
edit:
1st pic:
/http://www.shrani.si/?26/10F/WgXnpnB/problem1.png
2nd
http://www.shrani.si/?1G/T4/3AU4XOU7/problem2.png
sorry for the mistake. -
Hey everyone I am haveing problems with Flash Button
Hello everyone I am new here so I am haveing problems with
Flash Button because of the html address it wont go to the address
that i put into it it keep going to
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesigner.net
why does it do that? this is a link problem issue with flash
button in macromedia dreamweaver 8?
someone please help me?
Jeremy>
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesig
> ne
> r.net
In the dialog box for the Flash Button, in the link box, put
the full
absolute path if an external page. Including the
http:// part.
http://www.example.com/page.html
for pages inside your site- use the browse to file icon, and
use a relative
path.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Problem with installing Elements - from noob
I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?
Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236 -
Problem with flash on IE11 after using adobe cleaner
Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
Problem with flash player in firefox 12
Problem with flash 11.3 (beta 1,2) in firefox 12. Works in all other browser.
Screenshots
http://i.imgur.com/OZXvQ.png
http://i.imgur.com/VwUzk.png
http://i.imgur.com/XbXgV.png
http://i.imgur.com/dOT3w.png
http://i.imgur.com/aGgg8.png
Win 7 Ultimate SP1
Please fixHello
it is all working for me.
http://support.mozilla.org/en-US/kb/Basic%20Troubleshooting
Please try point 4,6 and 8
Win 7 Ultimate x64 SP1
Firefox 12.0b6
Flash Player 11.3 beta 1 & 2 -
Problem with Photoshop Elements Printing
I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?
Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
Re: Problem with Photoshop Elements Printing
created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Morning !
We have many problems with PHOTOSHOP ELEMENTS 12 ?
After installation on MAC OS X YOSEMITE .
S O S !!Exporter vers photoshop do you receive any specific error messages? In what way is Photoshop Elements 12 not working?
-
Problems with Photoshop Elements 11
I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.
attach a screenshot of the error message.
-
Problem exist only on YouTube. When i want get full screen, I have black screen with audio. If I click few times full screen button it helps, but I want to go to full screen by one click.
If i turn off hardware acceleration everything is ok but vids looks terrible.
I have this problem with Flash Player 10. No 9 works good, but some websites wants no. 10Generaly FP works, but problem is that i must press few times full screen button. Now i have turn off hardware accelleration, but movies are quite bad.
I have already installed newest graphic drivers but it didn't help.
Everything was good unless Flash Player and Mozilla notificated that update is necessary :< -
So I'm having a problem with flash player, and was wondering if anyone has experienced the same thing, or might be able to help.
- Upgraded 2 computers to snow leopard, macbook pro laptop, and mac Pro tower (intel proc).
- Laptop has no problems, everything renders fine, and without any difficulty.
- Mac Pro doesn't display any dynamic data, text fields show up blank, some flash player controls don't work, brightcove player won't load completely... things are just not working right.
- Main browser is Safari, but same problem exists in Camino, Firefox, etc...
- I've had Safari Stand installed, but have since removed it.
- I've removed GROWL notifications completely
- I've got debug and developer menus turned on (but have that with the laptop also.)
Please see the screenshot attached. This graph should have text data on it showing the x/y axis, the key, as well as data when you mouse over each block, but doesn't show anything.
The second screen shot shows a brightcove player from our website... There should have full controls at the bottom, and nothing shows up. If I right-click, and go to 'view full screen', I can't then get out of full screen by clicking escape key on the keyboard, I have to use any player controls, or right-click again, and hit 'exit full screen'.
Anyone have any suggestions? It's something to do with my computer, rather than snow leopard, because flash works fine on my laptop, but not on the desktop. Any help is really appreciated !Hi!
I reached your post because I was having the exact same issues as you and I found a fix that worked for me! The problem is a font issue: I logged in with the guest account that had no users font installed and flash was working fine, so I logged back into my account and moved all the fonts in my 'User>Library>Fonts' folder in a folder in the desktop. Then I closed and reopened Safari and Flash was working!
In the end the problem was with a version of Arial that I had in my users' font folder: I deleted just that, put my users' font back in the folder and the problem disappeared.
I hope it hepls!
best
nicola -
OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
Thanks.If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
It is also possible that your FlashPlayer is out of date.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
Ongoing problems with Flash in Firefox 8
I am still having problems with Flash player since upgrading to Firfox 8 - see previous posts.
Symptoms:
When I try to access any flash containing page, the flash content does not load or play - the area it should be is blank or shrunk out - not even a token jpeg.
What I have tried:
Checked Flash is installed and enabled and up to date - all OK.
Tried re-installing Flash anyway - no effect.
Tried uninstalling flash and re-installing - this fixes the problem temporarily, but as soon as I shut down and restart, the problem returns.
Tried disabling other add ons - makes no difference. Only addon in this area is Freecorder toolbar.
Tried updating settings in Windows Firewall to ensure Firefox is allowed - no change.
Ensured my anti-virus/spyware program (PC Tools Anti-virus) is not blocking any of the websites - nothing there.
Checked situation in IE (Yuck!) - works fine there.No response to this, and problem has not gone away. Looks like I am going to have to change browser....
-
Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
Problems with Italian version of Dreamweaver [subject edited by moderator]
The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
Ciao
PaoloDear Murray,
unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
I'm using just CC…
Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
>>
>> Problems with Italian version of Dreamweaver
>> created by MurraySummers in Dreamweaver support forum - View the full discussion
>> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
>>
>>
>> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
>>
>> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
>> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
>> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
>> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
>> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
>> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
>
Maybe you are looking for
-
Unit of measure is not an ISO code
Dear Expert, Unit of measure M has ISO code MTR and Dimension length. the UOM is in sync with ECC6 . However when trying to order from srm it bounces back with error message Unit of Measure M is not an ISO code. Further checking in CUNI shows that
-
I somehow managed to add lines on my master slide and can't get rid of them. I now have a useless rectangle on the left half of many of my slides. How do I remove this?
-
R U PEOPLE REALLY SATISFIED WITH VIDEO QUALITY OF ...
the resolution could have been better in n8, it same as 5800. a video clip with dark region it appears grey with pixels in n8 where as if the same clip played in n8, it appears like hd...............................SO SICK N8
-
I asked this question last week, but have not gotten an answer. I have Dreamweaver CS6 as part of the Cloud. I am using Lion 10.7.4. When I double click on Dreamweaver it gets the little white dot under it, like it's open, but it's there for only a s
-
Loading Vrml files in Swing using java3d loader
I've got problems loading Vrml files in Swing using java3d vrmlLoader. It seems to be only able to load vrml files that contains simple geometry like squares, cones etc. But when it comes to complicated shapes like IndexedFaceSet, its a blank. Does a