Problem with Idoc segment maximum length

Hi friends,
We are now creating a new Idoc type. We have started to create the first segment but we encountered a major problem.
The problem is that we have a field of 4000 characters but the limit of all segment fields together is 1000 characters.
Is there any way to change this limitation or another way to define Idoc?
Thanks in advanced,
Udi Dekel.

Hi,
When you create a segment that exceeds the max length, SAP automatically creates a child segment for the exceeded length. For your problem though, you can create 4 segments of length 1000 each and split the data in these 4 segments and then concatenate the data later in the idoc processing function module. On the other hand if it is an outbound idoc, you can ask the receiving system to do the same.
Best regards,
Advait

Similar Messages

Problem with SQL loader - "maximum length"

using SQL*Loader: Release 8.1.7.0.0
===================================
(full CTL enclosed below)
I have a problem with several rows, in which I'm getting the "Field in data file exceeds maximum length" error.
the DB field (referer) is a VARCHAR2(4000), and the field in the error rows never exceeds few hundred characters. According to Oracle docs I should be able to load fields which are no bigger than the DB field, what gives?
I tried the variation
referer CHAR "SUBSTR(:referer,1,100)"
for this field, which causes all the "referer" columns in the "good" rows to load no more than 100 characters, but the same error repeats for the same rows!
the input file is an IIS log, and the field is the REFERER field. its pure ASCII encoded, is there some character that cause Oracle to behave this way? is this a bug?
here is one "bad" row: the "bad" field starts with "ht
tp://web , is enclosed with quotes. I have replaced the client IP and other fields with xxx for privacy reasons.
after that, I have enclosed my CTL as well.
any help ?
Yoram Ayalon
BTW - I verified in the LOG file that the loader is reading my options for the columns as I described in the CTL. no problem there.
"2003-06-30 11:11:12" xxx.xxx.xxx.xxx WEBSRVXX 80 GET /xxx.xxx 200 0 778 1359 "ht
tp://web.ask.com/redir?bpg=http%3a%2f%2fweb.ask.com%2fweb%3fq%3dWhat%2bis%2bsign
al%2bcommunication%253f%26o%3d0%26page%3d1&q=What+is+signal+communication%3f&u=h
ttp%3a%2f%2ftm.wc.ask.com%2fr%3ft%3dan%26s%3da%26uid%3d032EBF1A318A100F3%26sid%3
d3d2bbe4f8d2bbe4f8%26qid%3d4B2346DA8A56C6418CB4DCB9091EEBA7%26io%3d0%26sv%3dza5c
b0db2%"
LOAD DATA
INFILE '/tmp/mod_websrvxx.txt'
APPEND INTO TABLE tmpLogs
FIELDS TERMINATED BY WHITESPACE optionally enclosed by '"'
(LogDate DATE "YYYY-MM-DD HH24:MI:SS", ClientIP, ServerName, ServerPort, ClientM
ethod,UriStem,Status,BytesSent,BytesReceived,TimeTaken,Referer CHAR "SUBSTR(:Re
ferer, 1, 100)" )

Use:
readsize=3000000
or some large number to raise this limit.
Check the below link for detailed explanation
http://asktom.oracle.com/pls/ask/f?p=4950:8:380010202423963671::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:2167288643374,

Problem with idoc DEBMAS

Hi everybody.
We have a problem with idoc DEBMAS.
This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
What can be done in R3 to send always this segment.
We dont want to sent the whole data but always this segment.
Any idea???
Thanks a lot!!!!!

Hi,
As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
if you need that segement always just copy the Idoc type and make it mandaotry field.
otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
Regards,
Suresh

Problems with Idoc Artmas03 to create a variant

Hi everyone, We had created a individual material through Idoc artmas03, we need to create a variant, we have problems with some segments E1BPE1VARKEY & E1BP1AUSPRT, our problem is how to create a variant & how to full this segments, is this correct from Idoc Armas03? or is it necesary another Idoc? Some have some examples, thank you very much
Best Regards from Mexico,
Atte Israel

Guys,
I am running mozilla firefoz 5.0 and the only option that is coming to me is to create folder in CA.
even though SAP recommands IE and allows portal from Mozilla, the later seems to have serious issues with Portal.
I remember working with several versions of mozilla, sometimes you right click, all option will come but you will be unable to choose options coz when u bring cursor to them they will skid here and there..
I hope no SAP note elobrates this as of now.
Ankur

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

Problem with IDOCs

Hi all,
I am trying to send MATMAS IDOCs to Siebel server using plain HTTP Reciever Adapter.I am able to see success messages in SXMB_MONI for Some IDOCs I mean where the IDOC have minimum segments which does not contains mandatory data.
In some IDOCs it is showing the following error which includes all the relavant fields for Siebel.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any ideas on this ???
Sekhar

Hi all,
sorry for the confusion...problem with the IDOC data only..
Sekhar

Problem in IDOC segment E1MTXLM

Hi all,
Basic type : MATMAS05
One of the segments is E1MTXLM has the data as below
"Heater assy., with NTC <(>&<)> protector, 240V, 3000W"
where as in the MM03 transaction Basic data text is shown as below
"Heater assy., with NTC & protector, 240V, 3000W"
I think there is problem while the IDOC is getting created but i have no idea what could be the problem.
Can any help in this regard.

Hi Nejuma,
I don't think there is any problem with cofiguration settings.u r getting the idocs for some vendors .
if iam not wrong u r giving LS in the tcode(we20).The method which u r using is change pointers.As u r using standard idoc all the settings will be done.
Only settings u have to do is
1>generate partner profiles(WE20)
2>Distribute model view(BD64).
REGARDS,
Nagaraj

Problems with IDOCS

Hi everyone!
I'm working with IDOCs and I am having the following problem:
I'm modifiying a specific standart IDOC (DELVRY03), adding a new structure called ZSTRUCTURE. When making an example to create the IDOC I am not able to find the new structure that I have just created in the IDOC.
Does anybody know why? Maybe the structure is empty, is this a problem?
Thank you very much.
Regards

hi,
   I dont think u can direct modify sap standard idoc type.
   Instead u can go for Idoc extension.
   Create structure ie segment u want to add say EDIT->set release
    and in we30 choose extension create zobject type with extension as standard idoc and choose EDIT->set release
   and goto we80 add msgtype,Basic idoc type, extension.
   I think this will fix ur problem.
Regards
Shanmukhi

HR Programming : Problem with IDOC HRMD_A

Hello ,
We use Idoc HRMD_A for transferring PA records from
one R3 system (ECC5) to another R3 system (46d).
We have a problem - The Idoc doesn't check the data
inserted against the database check tables and
inserts wrong values into the target system database.
(At least that what has happened when we transferred
wrong value of MASSN in 0000 records).
Is there something we can do ?
Maybe - Some flag we can sign in order a check against check tables will be done ?
Is it a problem with this IDOC ?
Thanks .
I appreciate any help.
Nitzan S.

Consultancy note 134085 :
"Ultimately you are responsible for consistency of this data. SAP saves this data directly on the database without checking the single fields and consistency of the data records (time constraints check, writing change pointers, value check) because the consistency for an R/3 - R/3 lingage is of course ensured."
The IDOCs were intended for R3->R3 data replication, and not for data loads/interfacing. Since you're having problems, I'm guessing in addition they require the same SAP version as well.

Idoc segment field length changes

Hi friends,,
I am new to idoc.
My requirement is in my segment
i am having 5 fields and also this segment is already realeased one.
i wnat to change the field length from 10 to 20 . how to do this ?
actually what i did is
1. i cancel the release for that segment.
2. in that field inside the dataelement i changed the field length from 10 to 20.
3. data elemnt get chaged from 10 to 20 but Export length for that field in Idoc segment still retain the 10 only
can you plz how to resolve this
deva

Hi,
The way you used is right. ( cancel release or create a new segment )
After you cancel release, try delete that field, and insert a new one.
If it isn't valid still, create a new segment instead.
Regards
Sam

Mapping Problem with IDOC HRMD_A05

Hi All,
When i am mapping source structure with IDOC HRMD_A05 i am getting Mapping not sufficiently defined...
The idoc is used to change the address of employee(infotype 0006)..
my source structure is
EMPADDR_MT
   EmpAddr1
     Trans_INFTY *
    Address1
      AddressType *
      PERNR       *
      EFdate      *
      Addr1       *
      Addr2       *
      ADDR4       *
      City        *
      Country     *
      state       *
      Postalcode *
the fields to be mapped
So can any one help me out what r fields to be maintained for <b>HRMD_A05</b>...
Regards,
Sridhar
Message was edited by: sridhar reddy kondam

All the required fields & segments(shown red in mapping editor or min occurence:1) of idoc need to be mapped.If any of the fields are not available in your source for mapping..map those fields with empty constants using constant option of the mapping editor.

Issue with IDOC segment creation..

hi,
i created an idoc segment thru we31. when i was saving it, and when the transport request was asked, i cancelled it. it so happend that the underlying structure was created (i was able to see that in se11) but in we31, the segment definition did not appear and i got the message "segment does not exist yet".
so in se11, i deleted the associated structure and tried to recreate the segment, i am not able to !! while saving, i get the error "you do not have authorization for delete for function idoc segment"
when i performed a segment check (ctrl + F1), i got the message,
Repository structure missing for segment ZZZ |
Inconsistent overall length in segment version 000
Segment version 000 not released
Entries exist in table of Segments for segment ZZZ
Entries exist in table of Segment definitions for segment ZZZ
Entries exist in table of Segment structures for segment ZZZ
| Segment ZZZ is inconsistent
what shud i do ?
thks

resolved. seems some authorization was missing. thks

Looping problem in idoc segments

Dear all,
I have created a own message type for material master,with four segments.Here for one material there may be different order unit like BOX,PAL etc.
When i am sending a material to xml format Its creating all the four segment for each order unit when it gets changed. I want only the order unit segment should repeat for one material.
Is there any looping changes should made in the program or what else?
Plz help me ASAP.
Thanks & Regards,
Arun.
Edited by: Arun Kumaran on Aug 27, 2008 3:21 PM

Please check the segment number of occurance. It should set to 1 for each parent Material segment. Watch out for syntax error for segment structure.
I hope this will help to solve issue.
Regards,
Mahesh

Problem update IBAN bank details with IDOCs segment E1KNBKM

Hi all,
i use Idoc DEBMAS07 in which i use the segment E1KNBKM to create IBAN in customer bank details. If bank details do not exist, the IDOC is integrated, IBAN is created.
If i recreated the same Idoc, with same data (just change bank name) the Idoc is in error with the message : 'No batch input data for screen SAPMF02D 0130'.
In debugging, we see that the dynpro sequence is wrong. For vendors it's work. I can create and update IBAN.
i don't find SAP notes, or help forum on this problem.
Any ideas ?
Thanks
Edited by: ToraTora on Aug 17, 2011 11:16 AM

maybe you are the first who encountered this error, open a call at SAP yourself

Problem with Idoc segment maximum length

Similar Messages

Maybe you are looking for