Problem with Individual Registration of HTMLDB app schema with SSO

I have successfully registered HTML DB instance as partner application to SSO and it works well.
Then, I also want to try with Individual registration of partner application schemas on the same HTML DB instance.
I have followed every steps in 'How-To' but keep getting this following error message:
Error Unable to run parse_url_cookie procedure as schema ICONNFNB with partner app name ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PARSE_URL_COOKIE' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

To add more info to my previous question, my HTML DB version is 1.6.0.00.87
I have successfully registered HTML DB instance as
partner application to SSO and it works well.
Then, I also want to try with Individual registration
of partner application schemas on the same HTML DB
instance.
I have followed every steps in 'How-To' but keep
getting this following error message:
Error Unable to run parse_url_cookie procedure as
schema ICONNFNB with partner app name
ICONNFNB_WORKSPACE
ORA-06550: line 1, column 7: PLS-00306: wrong number
or types of arguments in call to 'PARSE_URL_COOKIE'
ORA-06550: line 1, column 7: PL/SQL: Statement
ignored
Anyone knows how to deal with this error ?
Thanks in advance for any help.
-Gary

Similar Messages

Session management problems with SSO

Hi all-
I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
Thanks
Rob

Hi Scott-
Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
Apex version = 3.0.1.00.08
SSO SDK = ssosdk902.zip
I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
Login URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
Home URL: http://apex_host/pls/apex
Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
Logout URL: http://apex_host/pls/apex
RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
create package YOUR_PACKAGE as
procedure process_success(urlc in varchar2);
end YOUR_PACKAGE;
CREATE PACKAGE BODY YOUR_PACKAGE AS
procedure process_success(urlc in varchar2) as
begin
wwv_flow_custom_auth_sso.process_success(
urlc=>urlc,
p_partner_app_name=>'MY_PARTNER_NAME');
end process_success;
END YOUR_PACKAGE;
Anything look obviously wrong to you?
Thanks!
Rob

Problem with sso for asp applications

Hi,
i am using the web app integrator to integrate asp application with SSO, i am getting permission denied some times, the permission denied is a small html file on asp server side when userid is null.
I am sure that the user id is not null because i have written small script to respond back with the passed user id like response.write(""), it is giving back the passed user id every time but at the same time i am getting Permission denied.
The permission denied is a small html file on the .net server side when the ui=null in the pssing URL.
How this is happening at the same time, one is giving back the user id and one is taking the user id as null.
some times i am getting right page and some times giving permisssion denied.
the basic URl is
http://abc.xyz.com/sm_log.asp?userid=damodhar
There is no great security behind this only passing user id, they are not passing the password even in the http header authentication. the simple logic is they are hiding the URL from the view source.
if i pass the hard coded url from the browser i am getting the proper page at the same time if i pass the url from portal it is working some times and some times not, i don't know when?
I am using the web application integrator method.
we are operating portal server from internet and .net server is on intranet.
Thanks,
Damodhar.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

SSO between Portal and Nakia.....problem with SSO... library not found..

Hi Sdn's and Nakisa tehnical experts,
We have a Portal environment 7.02 , a Nakisa environment 3.0 (CE) and and HR backend environment 701 (604).
We are busy setting up SSO between Portal and Nakisa via the, URL iview for the Org chart (http://<host>:<port>OrgChart/default.jsp).
We have done as indicated in wiki:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAPSSOAuthenticationwithverify.pseusingSAPSSOEXT
We are however stil having issues with the SSO and in the cds.log the following is being displayed:
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.mysap.sso.SSO2Ticket : Could not load library: sapsecu.dll - java.lang.Exception: MySapInitialize failed: rc= 14null++
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : java.lang.Exception: MySapEvalLogonTicketEx failed: standard error= 9, ssf error= 0++
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Internal error (9) - No SSF error (0)++
Can someone indicate what I am doing wrong?
Regards Dries

Hi Luke,
thanks a lot for your help so far.
I have created a root/XML folder under the diretory, and the path is now as follows:
K:\usr\sap\NKP\J14\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__Sasol_DEV_LIVE\.delta\root\XML
It seems like it finds the verify.pse, but not the library, sapsecu.dll.
My credentials.xml file is as follows:
<credentials>
<assembly name="SapSso"/>
<info>
    <item name="PseFilePath">XML\verify.pse</item>
    <item name="SsfLibFilePath">XML\sapsecu.dll</item>
    <item name="PsePassword"></item>
    <item name="WindowsPlatform">64</item>
    <item name="TicketFile"></item>
    <item name="Base64decode">true</item>
   </info>
</credentials>
I however stilll get the following in the cds.log
15 Aug 2011 13:59:53 INFO com.nakisa.Logger - Tenant ID: 000
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - LoginSettingsObject Load: 1719
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Credential provider SapSso
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Using cert: K:\usr\sap\NKP\J14\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\XML\verify.pse
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Ticket is: AjExMDAgAA9wb3J0YWw6eXNzZWxhZ2OIABNiYXNpY2F1dGhlbnRpY2F0aW9uAQAIWVNTRUxBR0MCAAMwMDADAANEUDkEAAwyMDExMDgxNTExNDcFAAQAAAAICgAIWVNTRUxBR0P%2FAQQwggEABgkqhkiG9w0BBwKggfIwge8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBzzCBzAIBATAiMB0xDDAKBgNVBAMTA0RQOTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTEwODE1MTE0NzIwWjAjBgkqhkiG9w0BCQQxFgQUK13ubzFiQrY4H%2FLRk2ysyvPSvccwCQYHKoZIzjgEAwQuMCwCFF1W9d!tAjLvP8dnb1bs4XghaHSBAhQ9kd9N!bJubUWITtkzU!za96lxNg%3D%3D
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Version of SAPSSOEXT: SAPSSOEXT 4
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : SCUE LIB base path is:
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.mysap.sso.SSO2Ticket : Could not load library: sapsecu.dll - java.lang.Exception: MySapInitialize failed: rc= 14null
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : java.lang.Exception: MySapEvalLogonTicketEx failed: standard error= 9, ssf error= 0
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Internal error (9) - No SSF error (0)
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to authenticate null
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider SapSso
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User authenticated null
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication row is {SapSsoTicket=AjExMDAgAA9wb3J0YWw6eXNzZWxhZ2OIABNiYXNpY2F1dGhlbnRpY2F0aW9uAQAIWVNTRUxBR0MCAAMwMDADAANEUDkEAAwyMDExMDgxNTExNDcFAAQAAAAICgAIWVNTRUxBR0P%2FAQQwggEABgkqhkiG9w0BBwKggfIwge8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBzzCBzAIBATAiMB0xDDAKBgNVBAMTA0RQOTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTEwODE1MTE0NzIwWjAjBgkqhkiG9w0BCQQxFgQUK13ubzFiQrY4H%2FLRk2ysyvPSvccwCQYHKoZIzjgEAwQuMCwCFF1W9d!tAjLvP8dnb1bs4XghaHSBAhQ9kd9N!bJubUWITtkzU!za96lxNg%3D%3D}
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User population provider is Database
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/RFC_REPORT took: 266ms
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - BAPI_SAP_OTFProcessor_Report : WhereClause : ( (Userid is null) or (Userid='') ); Table : (SAP_UserPopulation); Dataelement : (UserPopulationInfo)
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User populated
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Role mapping provider is: SAP
15 Aug 2011 14:00:00 ERROR com.nakisa.Logger - SAPRoleMapping_SAP.MapRoles() : while trying to invoke the method java.lang.String.toUpperCase() of an object loaded from local variable 'value'
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Login process finished with errors
Any ideas? Should I maybe hardcode the location in the credentials.xml?
Kind regards
Dries Yssel

Apex Application not working after importing to my apps schema...

Hi friends,
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends.
As this is my urgent requirement in my project..Reply me ASAP...
Thanks in Advance..
Regards,
Harry...

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

FC3 : Problem with Single Sign-On

Hi,
We are installing Oracle 10g (ias 10.1.2) on Federo Core 3 Operating system.
We installed successfully 'oracle Infrastructure' 10.1.2. We navigated to infrastructure home, the single sign-on status is'Down' and other components are 'Up'.
What could be the problem with SSO?.
Your help will be appreciated.
Regards,
Raj

Hello
I have the same problem. I installed succesfully Oracle10g on SLSE9 but the single sign-On is every down I followed all step but the problem isn't resolved.
I would like the infrastructure on Linux you have any idea?

Custom tables create in Apps schema ( What are the problems with this?)wwww

Hello all,
I'm a dba in a new environment where a number of custom schemas are being created in the apps schema. I know this is not considered Oracle's best practice and I would like to make some recommendations for a change. Before doing so, I would like to know the problems that are associated with custom tables living in the apps schema. We are currently on 11.5.10.2 on AIX. Also, if someone can point me to any "Official" customization standard or Oracle documention where I can backup my case it would be greatly appreciated.
Thanks in advance,

Hi,
Please see this thread.
Custom application implemented in E-bussiness Suite
Re: Custom application implemented in E-bussiness Suite
Regards,
Hussein

Problem with htmldb 2 (Sorry APEX)!

I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
LoadModule mime_module          modules/ApacheModuleMime.dll
LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
LoadModule digest_module      modules/ApacheModuleDigest.dll
LoadModule expires_module      modules/ApacheModuleExpires.dll
LoadModule headers_module      modules/ApacheModuleHeaders.dll
LoadModule proxy_module      modules/ApacheModuleProxy.dll
LoadModule speling_module      modules/ApacheModuleSpeling.dll
LoadModule status_module      modules/ApacheModuleStatus.dll
LoadModule info_module          modules/ApacheModuleInfo.dll
LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
LoadModule perl_module      modules/ApacheModulePerl.DLL
LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
LoadModule onsint_module      modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
     UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
     Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
     AllowOverride None
     Options None
     Order allow,deny
     Allow from all
     SetHandler fastcgi-script
     <IfModule mod_ossl.c>
     SSLOptions +StdEnvVars
     </IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Problems with starting App-v packages in Windows 10

Hello,
I am testing some app-v 5 (sp3) packages on windows 10 (Build 9926). But with some packages I get this Error:
“The application was unable to start correctly (0xc0000142)”. Click OK to close the application"
This package contains Google Chrome 41.
This is the error I can find in the Event Viewer:
Log Name: Application
Source: Application Error
Date: 20/03/2015 13:06:42
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: %computername%
Description:
Faulting application name: chrome.exe, version: 41.0.2272.89, time stamp: 0x54fa819a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x132c
Faulting application start time: 0x01d06306529e9124
Faulting application path: C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe
Faulting module path: unknown
Report Id: 917fe03e-cef9-11e4-ab38-00155d016404
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-20T12:06:42.000000000Z" />
<EventRecordID>895</EventRecordID>
<Channel>Application</Channel>
<Computer>%computername%</Computer>
<Security />
</System>
<EventData>
<Data>chrome.exe</Data>
<Data>41.0.2272.89</Data>
<Data>54fa819a</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>00000000</Data>
<Data>132c</Data>
<Data>01d06306529e9124</Data>
<Data>C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe</Data>
<Data>unknown</Data>
<Data>917fe03e-cef9-11e4-ab38-00155d016404</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
If I start the same package in Windows 8.1, no problems occur.
Chrome is not the only package that I have problems with.
I am still new in working with app-v.
Has anyone experienced the same problem and found a solution for it?

Hello,
Since Windows 10 is in technical preview I would guess that this is not supported by anyone.
Had one googled this the Three following top-topics would have showed up;
https://support.microsoft.com/en-us/kb/2777003?wa=wsignin1.0
https://packnowledge.wordpress.com/2014/04/28/launching-a-network-executable-inside-an-app-v-5-virtual-environment-revised/
http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

I'm having a problem with downloading multiple app updates and moving songs between iTunes and my external hard drive.

I'm having two problems with iTunes, but I'm not sure if they're related issues. First, when I try to click "Download All Updates" for apps, only one update will download and I will get successive error messages for all of the other updates. However, if I click update for each individual app, they download fine. Why am I not able to download all app updates simultaneously now.
My second issue is that I cannot move songs from iTunes to my external hard drive or vice versa. When I drag the files, the blue plus sign appears, but the file does not appear where I moved it to.
Both issues have been occuring for about month. Any help would be greatly appreciated.

While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
The other issue doesn't ring any bells.
tt2

Problem with database schema objects in the entity object wizard

Hi All,
When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to select the synonym check box.
Can any of you folks tell me how to enable the database schema objects (check boxes for tables,synonyms...).
Thanks in Advance.
Raja.M

Make sure your using rite version of jdeveloper..
Make sure your using apps schema and check whether your able perform DML operations in the schema vis sql developer.
--Prasanna

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Hi i'm using iphone 4 and i have problem with viber apps while i'm installing

hi i'm using iphone 4 and i have problem with viber apps while i'm installing & registration process its says error on system mainternance. can you please help me out?
thank you.

OK, let's try again. Wind is NOT a supported carrier. In order to use tethering, it must be supported and activated by your carrier for the iPhone. This usually involves an additional fee. You will have to ask your carrier if they can enable it. Odds are, since they are not a supported carrier, they can not. If you want to use tethering, you will most likely have to switch to a supported carrier that offers this feature on the iPhone.
A list of supported carriers can be found here: http://support.apple.com/kb/ht1937

Problem with downloading individual songs from an already purchased album to iPhone

Hi All,
I'm having problems with downloading single songs from the "purchased" list onto my iPhone. I reset my phone and went to redownload my music, however i only want to download certain songs from different albums which in the past i've been able to do by navigating to the purchases section of the itunes app, then opening each album and selecting the cloud like icon by each song i want.
Having tried this today, i get the list of songs however the all have a "Purchased" next to them which is greyed out and the only way to download anything is to get the whole album. I've not got iTunes match on and can't think of any settings i've changed, can any suggest what i need to do to enable me to just get a selection of songs?

Actually Michael I know exactly how to delete.. The iPhone would not let me swipe to the left to delete the individual song, so I went to the album view and did it there.. The issue I am having is a bug because it removed 3/4 of the albums availablity off my iPhone.. You post proved no help because it is basic troubleshooting which, if you read my post, I have already done.. I did however figure out how to fix my issue on my own.. Basically I had to remove the album from my iTunes on my computer and upload it again to iTunes Match..

It looks like the way forward is to delete any apps you are having problems with and reinstall hopefully you have your data on iCloud this seems to work

Looks like deleting and reinstalling the apps your having the problems with works in some cases

Hi Flash, Just some info to correct yours. First, not everyone is having a problem with FP 10.1 and there are solutions and reverting to FP 10.0 would not be the first choice. If that was for you, that's fine. If you would read the many many threads here, you would find correct information for users that want to revert back to FP10.
Also may I suggest you read up on Firefox version 3.6.6 as this is involved sometimes with FP 10.1.
Lastly, I think it is always better to find out what a user's issues are before offering a solution. Reverting back to FP 10.0 is not for everyone that is having a problem nor should it be.
If your instructions solved whatever problem you were having, that's great. However, to recommend this to other users that come here for help without knowing what their problems are may not be the best advice, in my opinion.
There are many other details in the Uninstall Instructions and also the Install Instructions that need to be followed.
That is why it is better for each user to have their own thread and receive help for their individual issues. This is also based on their computer system configuration.
Believe me, if there was one fix for all FP 10.1 or any other version issues, it would be posted
Thanks,
eidnolb

Problem with Individual Registration of HTMLDB app schema with SSO

Similar Messages

Maybe you are looking for