Problem with Meas Point and Documents

Hi Friends,
I have created a measuring point for and equipment.
then I am posting first meas document with reading difference 2.
then my total reading becomes 2.
while posting 2nd meas document with reading difference 5
then my totalCtrRading becomes "280" and counter reading becomes "280".
If I enter the Counter reading as 7 then the difference value becomes " -268 "
and totalCtrReading becomes "7".
But i dont know why system is behaving in this way.Can you please help
Regards
AM

Hi Thayagrajan ,
max reading that can be displayed is 5000.
and the counter min reading is 0.
Regards
Achal Mehra
Edited by: Amehra on Jun 14, 2011 6:54 AM

Similar Messages

Problem with decimal point in Korea and Japan

Hi all,
I have one problem with decimal points.
I need to change in my out put cuurency values as per japan or korea standards.
Please help me is there any function module for this one.
program using alv grid display.
i use write statement but it is not working. Because
data: L_AMT type glpca-hsl,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.
here i need to do
L_AMT = G_AMT.   "" going to runtime error.
if i taken like
data: L_AMT TYPE CHAR15,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.   "" it is not working
Regards
margani

Hello,
This is pretty basic, whenever you've currency & quantity fields you need to pass the corres. reference fields.
In your case you need to populate the cfieldname & ctabname fields of the FieldCat.
BR,
Suhas

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Problem with viewing Adobe PDF documents

Problem with viewing Adobe PDF documents
I have a Windows 7 Home Premium Computer
I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
Prior to downloading each version I would delete the current version using control panel programs uninstall.
After each new installation I would shut down the computer and then restart the computer.
I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
I am told after download that the version downloaded successfully.
I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
None of the above has helped.
The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon. All PDF documents show as the PDF Adobe icon.
I have tested various PDFs and none will open on this computer but they will open on other computers.
I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
Does anyone have any ideas about what is going on and how I can fix this?
Could you please answer in this forum and email me at [removed]
I am so puzzled and frustrated.

Thank you so much this did the trick.
I spent so many hours on trying to sort this out and your answer was so simple and clear.
Regards
Kazzamday

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Im having problems with my illustrator , and i don't know how to fix it?

hey, guys. um my illustrator is having this problem with the navigator . and its makiing this fat lines and when i click the line on the little box in the bottom
and put it at 100 % it comes out like this
all small and i dont understand why is doing this.
can tou guys please help me with this i have a big project due and i cant work with this like it is ...>!!!!!

You can change your artboard size without having to make a new document.
1. Click on the Artboard Tool
2. In the top menu, you can type new dimensions. Make sure to type in the correct units!

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Problem with Vanishing Point

hello!
I've got a problem using Vanishing Point filter in Photoshop CS4. When I load this filter an error message pops saying "The operation could not be completed"
I attach a screen cap of the error. Somebody can help? thanks.

I run into this problem with Vanishing Point on about a quarter of the files I run the filter on. I can initially create a grid and do one transform, but the next time I try to run the filter I get the error, "The operation could not be completed". Then the error seems to stay attached to the file. I can run the filter on another file, but even if I close and reopen the file, I still can't run the filter. Even doing Save As and renaming the file doesn't rid it of the error.
This has been the case since VP was introduced. I'm now on CS4. MacPro Dual-Core, 8GB Ram.
I've tried changing the memory allocation to 55% with no change.
I see that this has been addressed before in the Forum with no solution, Chris Cox care to wade in?
This is a potentially valuable tool if it were implemented better.
Craig

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have a second generation shuffle and even though (after charging ) the green battery light is on - soon after it turns orange and then red. Is there a problem with the battery and is it fixable?

I have a second generation shuffle and even though (after charging) the green battery light is on it soon turns orange and red. Is there a problem with the battery and if so is it fixable?

If it's a 2nd gen shuffle, it is probably about six years old at this point. The cause is likely to be a worn out battery that is no longer able to hold its charge for very long.
It is technically fixable. This web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle
But it is very small, so you need to be good at doing such things. The cost to have a repair shop do the work is likely to be uneconomical, compared to the cost of a brand new 4th gen shuffle ($50), which has more features (and possibly double the storage) plus a one-year warranty.

Problem with Meas Point and Documents

Similar Messages

Maybe you are looking for